/*
* PXA270-based Intel Mainstone platforms.
*
* Copyright (c) 2007 by Armin Kuster <akuster@kama-aina.net> or
* <akuster@mvista.com>
*
* Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
*
* This code is licensed under the GNU GPL v2.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include "qemu/osdep.h"
#include "qemu/error-report.h"
#include "qapi/error.h"
#include "hw/arm/pxa.h"
#include "hw/arm/boot.h"
#include "net/net.h"
#include "hw/net/smc91c111.h"
#include "hw/boards.h"
#include "hw/block/flash.h"
#include "hw/sysbus.h"
#include "exec/address-spaces.h"
#include "sysemu/qtest.h"
#include "cpu.h"
/* Device addresses */
#define MST_FPGA_PHYS 0x08000000
#define MST_ETH_PHYS 0x10000300
#define MST_FLASH_0 0x00000000
#define MST_FLASH_1 0x04000000
/* IRQ definitions */
#define MMC_IRQ 0
#define USIM_IRQ 1
#define USBC_IRQ 2
#define ETHERNET_IRQ 3
#define AC97_IRQ 4
#define PEN_IRQ 5
#define MSINS_IRQ 6
#define EXBRD_IRQ 7
#define S0_CD_IRQ 9
#define S0_STSCHG_IRQ 10
#define S0_IRQ 11
#define S1_CD_IRQ 13
#define S1_STSCHG_IRQ 14
#define S1_IRQ 15
static const struct keymap map[0xE0] = {
[0 ... 0xDF] = { -1, -1 },
[0x1e] = {0,0}, /* a */
[0x30] = {0,1}, /* b */
[0x2e] = {0,2}, /* c */
[0x20] = {0,3}, /* d */
[0x12] = {0,4}, /* e */
[0x21] = {0,5}, /* f */
[0x22] = {1,0}, /* g */
[0x23] = {1,1}, /* h */
[0x17] = {1,2}, /* i */
[0x24] = {1,3}, /* j */
[0x25] = {1,4}, /* k */
[0x26] = {1,5}, /* l */
[0x32] = {2,0}, /* m */
[0x31] = {2,1}, /* n */
[0x18] = {2,2}, /* o */
[0x19] = {2,3}, /* p */
[0x10] = {2,4}, /* q */
[0x13] = {2,5}, /* r */
[0x1f] = {3,0}, /* s */
[0x14] = {3,1}, /* t */
[0x16] = {3,2}, /* u */
[0x2f] = {3,3}, /* v */
[0x11] = {3,4}, /* w */
[0x2d] = {3,5}, /* x */
[0x34] = {4,0}, /* . */
[0x15] = {4,2}, /* y */
[0x2c] = {4,3}, /* z */
[0x35] = {4,4}, /* / */
[0xc7] = {5,0}, /* Home */
[0x2a] = {5,1}, /* shift */
/*
* There are two matrix positions which map to space,
* but QEMU can only use one of them for the reverse
* mapping, so simply use the second one.
*/
/* [0x39] = {5,2}, space */
[0x39] = {5,3}, /* space */
/*
* Matrix position {5,4} and other keys are missing here.
* TODO: Compare with Linux code and test real hardware.
*/
[0x1c] = {5,4}, /* enter */
[0x0e] = {5,5}, /* backspace */
[0xc8] = {6,0}, /* up */
[0xd0] = {6,1}, /* down */
[0xcb] = {6,2}, /* left */
[0xcd] = {6,3}, /* right */
};
enum mainstone_model_e { mainstone };
#define MAINSTONE_RAM 0x04000000
#define MAINSTONE_ROM 0x00800000
#define MAINSTONE_FLASH 0x02000000
static struct arm_boot_info mainstone_binfo = {
.loader_start = PXA2XX_SDRAM_BASE,
.ram_size = 0x04000000,
};
static void mainstone_common_init(MemoryRegion *address_space_mem,
MachineState *machine,
enum mainstone_model_e model, int arm_id)
{
uint32_t sector_len = 256 * 1024;
hwaddr mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 };
PXA2xxState *mpu;
DeviceState *mst_irq;
DriveInfo *dinfo;
int i;
MemoryRegion *rom = g_new(MemoryRegion, 1);
/* Setup CPU & memory */
mpu = pxa270_init(address_space_mem, mainstone_binfo.ram_size,
machine->cpu_type);
memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM,
&error_fatal);
memory_region_add_subregion(address_space_mem, 0, rom);
/* There are two 32MiB flash devices on the board */
for (i = 0; i < 2; i ++) {
dinfo = drive_get(IF_PFLASH, 0, i);
if (!pflash_cfi01_register(mainstone_flash_base[i],
i ? "mainstone.flash1" : "mainstone.flash0",
MAINSTONE_FLASH,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
sector_len, 4, 0, 0, 0, 0, 0)) {
error_report("Error registering flash memory");
exit(1);
}
}
mst_irq = sysbus_create_simple("mainstone-fpga", MST_FPGA_PHYS,
qdev_get_gpio_in(mpu->gpio, 0));
/* setup keypad */
pxa27x_register_keypad(mpu->kp, map, 0xe0);
/* MMC/SD host */
pxa2xx_mmci_handlers(mpu->mmc, NULL, qdev_get_gpio_in(mst_irq, MMC_IRQ));
pxa2xx_pcmcia_set_irq_cb(mpu->pcmcia[0],
qdev_get_gpio_in(mst_irq, S0_IRQ),
qdev_get_gpio_in(mst_irq, S0_CD_IRQ));
pxa2xx_pcmcia_set_irq_cb(mpu->pcmcia[1],
qdev_get_gpio_in(mst_irq, S1_IRQ),
qdev_get_gpio_in(mst_irq, S1_CD_IRQ));
smc91c111_init(&nd_table[0], MST_ETH_PHYS,
qdev_get_gpio_in(mst_irq, ETHERNET_IRQ));
mainstone_binfo.board_id = arm_id;
arm_load_kernel(mpu->cpu, machine, &mainstone_binfo);
}
static void mainstone_init(MachineState *machine)
{
mainstone_common_init(get_system_memory(), machine, mainstone, 0x196);
}
static void mainstone2_machine_init(MachineClass *mc)
{
mc->desc = "Mainstone II (PXA27x)";
mc->init = mainstone_init;
mc->ignore_memory_transaction_failures = true;
mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c5");
}
DEFINE_MACHINE("mainstone", mainstone2_machine_init)
