/*
* QEMU model of the VersalUsb2CtrlRegs Register control/Status block for
* USB2.0 controller
*
* This module should control phy_reset, permanent device plugs, frame length
* time adjust & setting of coherency paths. None of which are emulated in
* present model.
*
* Copyright (c) 2020 Xilinx Inc. Vikram Garhwal <fnu.vikram@xilinx.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "hw/sysbus.h"
#include "hw/irq.h"
#include "hw/register.h"
#include "qemu/bitops.h"
#include "qemu/log.h"
#include "qom/object.h"
#include "migration/vmstate.h"
#include "hw/usb/xlnx-versal-usb2-ctrl-regs.h"
#ifndef XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG
#define XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG 0
#endif
REG32(BUS_FILTER, 0x30)
FIELD(BUS_FILTER, BYPASS, 0, 4)
REG32(PORT, 0x34)
FIELD(PORT, HOST_SMI_BAR_WR, 4, 1)
FIELD(PORT, HOST_SMI_PCI_CMD_REG_WR, 3, 1)
FIELD(PORT, HOST_MSI_ENABLE, 2, 1)
FIELD(PORT, PWR_CTRL_PRSNT, 1, 1)
FIELD(PORT, HUB_PERM_ATTACH, 0, 1)
REG32(JITTER_ADJUST, 0x38)
FIELD(JITTER_ADJUST, FLADJ, 0, 6)
REG32(BIGENDIAN, 0x40)
FIELD(BIGENDIAN, ENDIAN_GS, 0, 1)
REG32(COHERENCY, 0x44)
FIELD(COHERENCY, USB_COHERENCY, 0, 1)
REG32(XHC_BME, 0x48)
FIELD(XHC_BME, XHC_BME, 0, 1)
REG32(REG_CTRL, 0x60)
FIELD(REG_CTRL, SLVERR_ENABLE, 0, 1)
REG32(IR_STATUS, 0x64)
FIELD(IR_STATUS, HOST_SYS_ERR, 1, 1)
FIELD(IR_STATUS, ADDR_DEC_ERR, 0, 1)
REG32(IR_MASK, 0x68)
FIELD(IR_MASK, HOST_SYS_ERR, 1, 1)
FIELD(IR_MASK, ADDR_DEC_ERR, 0, 1)
REG32(IR_ENABLE, 0x6c)
FIELD(IR_ENABLE, HOST_SYS_ERR, 1, 1)
FIELD(IR_ENABLE, ADDR_DEC_ERR, 0, 1)
REG32(IR_DISABLE, 0x70)
FIELD(IR_DISABLE, HOST_SYS_ERR, 1, 1)
FIELD(IR_DISABLE, ADDR_DEC_ERR, 0, 1)
REG32(USB3, 0x78)
static void ir_update_irq(VersalUsb2CtrlRegs *s)
{
bool pending = s->regs[R_IR_STATUS] & ~s->regs[R_IR_MASK];
qemu_set_irq(s->irq_ir, pending);
}
static void ir_status_postw(RegisterInfo *reg, uint64_t val64)
{
VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
/*
* TODO: This should also clear USBSTS.HSE field in USB XHCI register.
* May be combine both the modules.
*/
ir_update_irq(s);
}
static uint64_t ir_enable_prew(RegisterInfo *reg, uint64_t val64)
{
VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
uint32_t val = val64;
s->regs[R_IR_MASK] &= ~val;
ir_update_irq(s);
return 0;
}
static uint64_t ir_disable_prew(RegisterInfo *reg, uint64_t val64)
{
VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
uint32_t val = val64;
s->regs[R_IR_MASK] |= val;
ir_update_irq(s);
return 0;
}
static const RegisterAccessInfo usb2_ctrl_regs_regs_info[] = {
{ .name = "BUS_FILTER", .addr = A_BUS_FILTER,
.rsvd = 0xfffffff0,
},{ .name = "PORT", .addr = A_PORT,
.rsvd = 0xffffffe0,
},{ .name = "JITTER_ADJUST", .addr = A_JITTER_ADJUST,
.reset = 0x20,
.rsvd = 0xffffffc0,
},{ .name = "BIGENDIAN", .addr = A_BIGENDIAN,
.rsvd = 0xfffffffe,
},{ .name = "COHERENCY", .addr = A_COHERENCY,
.rsvd = 0xfffffffe,
},{ .name = "XHC_BME", .addr = A_XHC_BME,
.reset = 0x1,
.rsvd = 0xfffffffe,
},{ .name = "REG_CTRL", .addr = A_REG_CTRL,
.rsvd = 0xfffffffe,
},{ .name = "IR_STATUS", .addr = A_IR_STATUS,
.rsvd = 0xfffffffc,
.w1c = 0x3,
.post_write = ir_status_postw,
},{ .name = "IR_MASK", .addr = A_IR_MASK,
.reset = 0x3,
.rsvd = 0xfffffffc,
.ro = 0x3,
},{ .name = "IR_ENABLE", .addr = A_IR_ENABLE,
.rsvd = 0xfffffffc,
.pre_write = ir_enable_prew,
},{ .name = "IR_DISABLE", .addr = A_IR_DISABLE,
.rsvd = 0xfffffffc,
.pre_write = ir_disable_prew,
},{ .name = "USB3", .addr = A_USB3,
}
};
static void usb2_ctrl_regs_reset_init(Object *obj, ResetType type)
{
VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj);
unsigned int i;
for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) {
register_reset(&s->regs_info[i]);
}
}
static void usb2_ctrl_regs_reset_hold(Object *obj)
{
VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj);
ir_update_irq(s);
}
static const MemoryRegionOps usb2_ctrl_regs_ops = {
.read = register_read_memory,
.write = register_write_memory,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
};
static void usb2_ctrl_regs_init(Object *obj)
{
VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj);
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
RegisterInfoArray *reg_array;
memory_region_init(&s->iomem, obj, TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
USB2_REGS_R_MAX * 4);
reg_array =
register_init_block32(DEVICE(obj), usb2_ctrl_regs_regs_info,
ARRAY_SIZE(usb2_ctrl_regs_regs_info),
s->regs_info, s->regs,
&usb2_ctrl_regs_ops,
XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG,
USB2_REGS_R_MAX * 4);
memory_region_add_subregion(&s->iomem,
0x0,
®_array->mem);
sysbus_init_mmio(sbd, &s->iomem);
sysbus_init_irq(sbd, &s->irq_ir);
}
static const VMStateDescription vmstate_usb2_ctrl_regs = {
.name = TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32_ARRAY(regs, VersalUsb2CtrlRegs, USB2_REGS_R_MAX),
VMSTATE_END_OF_LIST(),
}
};
static void usb2_ctrl_regs_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
ResettableClass *rc = RESETTABLE_CLASS(klass);
rc->phases.enter = usb2_ctrl_regs_reset_init;
rc->phases.hold = usb2_ctrl_regs_reset_hold;
dc->vmsd = &vmstate_usb2_ctrl_regs;
}
static const TypeInfo usb2_ctrl_regs_info = {
.name = TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(VersalUsb2CtrlRegs),
.class_init = usb2_ctrl_regs_class_init,
.instance_init = usb2_ctrl_regs_init,
};
static void usb2_ctrl_regs_register_types(void)
{
type_register_static(&usb2_ctrl_regs_info);
}
type_init(usb2_ctrl_regs_register_types)