/*
* ARM Versatile Platform/Application Baseboard System emulation.
*
* Copyright (c) 2005-2006 CodeSourcery.
* Written by Paul Brook
*
* This code is licenced under the GPL.
*/
#include "vl.h"
#include "arm_pic.h"
#define LOCK_VALUE 0xa05f
/* Primary interrupt controller. */
typedef struct vpb_sic_state
{
arm_pic_handler handler;
uint32_t base;
uint32_t level;
uint32_t mask;
uint32_t pic_enable;
void *parent;
int irq;
} vpb_sic_state;
static void vpb_sic_update(vpb_sic_state *s)
{
uint32_t flags;
flags = s->level & s->mask;
pic_set_irq_new(s->parent, s->irq, flags != 0);
}
static void vpb_sic_update_pic(vpb_sic_state *s)
{
int i;
uint32_t mask;
for (i = 21; i <= 30; i++) {
mask = 1u << i;
if (!(s->pic_enable & mask))
continue;
pic_set_irq_new(s->parent, i, (s->level & mask) != 0);
}
}
static void vpb_sic_set_irq(void *opaque, int irq, int level)
{
vpb_sic_state *s = (vpb_sic_state *)opaque;
if (level)
s->level |= 1u << irq;
else
s->level &= ~(1u << irq);
if (s->pic_enable & (1u << irq))
pic_set_irq_new(s->parent, irq, level);
vpb_sic_update(s);
}
static uint32_t vpb_sic_read(void *opaque, target_phys_addr_t offset)
{
vpb_sic_state *s = (vpb_sic_state *)opaque;
offset -= s->base;
switch (offset >> 2) {
case 0: /* STATUS */
return s->level & s->mask;
case 1: /* RAWSTAT */
return s->level;
case 2: /* ENABLE */
return s->mask;
case 4: /* SOFTINT */
return s->level & 1;
case 8: /* PICENABLE */
return s->pic_enable;
default:
printf ("vpb_sic_read: Bad register offset 0x%x\n", offset);
return 0;
}
}
static void vpb_sic_write(void *opaque, target_phys_addr_t offset,
uint32_t value)
{
vpb_sic_state *s = (vpb_sic_state *)opaque;
offset -= s->base;
switch (offset >> 2) {
case 2: /* ENSET */
s->mask |= value;
break;
case 3: /* ENCLR */
s->mask &= ~value;
break;
case 4: /* SOFTINTSET */
if (value)
s->mask |= 1;
break;
case 5: /* SOFTINTCLR */
if (value)
s->mask &= ~1u;
break;
case 8: /* PICENSET */
s->pic_enable |= (value & 0x7fe00000);
vpb_sic_update_pic(s);
break;
case 9: /* PICENCLR */
s->pic_enable &= ~value;
vpb_sic_update_pic(s);
break;
default:
printf ("vpb_sic_write: Bad register offset 0x%x\n", offset);
return;
}
vpb_sic_update(s);
}
static CPUReadMemoryFunc *vpb_sic_readfn[] = {
vpb_sic_read,
vpb_sic_read,
vpb_sic_read
};
static CPUWriteMemoryFunc *vpb_sic_writefn[] = {
vpb_sic_write,
vpb_sic_write,
vpb_sic_write
};
static vpb_sic_state *vpb_sic_init(uint32_t base, void *parent, int irq)
{
vpb_sic_state *s;
int iomemtype;
s = (vpb_sic_state *)qemu_mallocz(sizeof(vpb_sic_state));
if (!s)
return NULL;
s->handler = vpb_sic_set_irq;
s->base = base;
s->parent = parent;
s->irq = irq;
iomemtype = cpu_register_io_memory(0, vpb_sic_readfn,
vpb_sic_writefn, s);
cpu_register_physical_memory(base, 0x00000fff, iomemtype);
/* ??? Save/restore. */
return s;
}
/* System controller. */
typedef struct {
uint32_t base;
uint32_t leds;
uint16_t lockval;
uint32_t cfgdata1;
uint32_t cfgdata2;
uint32_t flags;
uint32_t nvflags;
uint32_t resetlevel;
} vpb_sys_state;
static uint32_t vpb_sys_read(void *opaque, target_phys_addr_t offset)
{
vpb_sys_state *s = (vpb_sys_state *)opaque;
offset -= s->base;
switch (offset) {
case 0x00: /* ID */
return 0x41007004;
case 0x04: /* SW */
/* General purpose hardware switches.
We don't have a useful way of exposing these to the user. */
return 0;
case 0x08: /* LED */
return s->leds;
case 0x20: /* LOCK */
return s->lockval;
case 0x0c: /* OSC0 */
case 0x10: /* OSC1 */
case 0x14: /* OSC2 */
case 0x18: /* OSC3 */
case 0x1c: /* OSC4 */
case 0x24: /* 100HZ */
/* ??? Implement these. */
return 0;
case 0x28: /* CFGDATA1 */
return s->cfgdata1;
case 0x2c: /* CFGDATA2 */
return s->cfgdata2;
case 0x30: /* FLAGS */
return s->flags;
case 0x38: /* NVFLAGS */
return s->nvflags;
case 0x40: /* RESETCTL */
return s->resetlevel;
case 0x44: /* PCICTL */
return 1;
case 0x48: /* MCI */
return 0;
case 0x4c: /* FLASH */
return 0;
case 0x50: /* CLCD */
return 0x1000;
case 0x54: /* CLCDSER */
return 0;
case 0x58: /* BOOTCS */
return 0;
case 0x5c: /* 24MHz */
/* ??? not implemented. */
return 0;
case 0x60: /* MISC */
return 0;
case 0x64: /* DMAPSR0 */
case 0x68: /* DMAPSR1 */
case 0x6c: /* DMAPSR2 */
case 0x8c: /* OSCRESET0 */
case 0x90: /* OSCRESET1 */
case 0x94: /* OSCRESET2 */
case 0x98: /* OSCRESET3 */
case 0x9c: /* OSCRESET4 */
case 0xc0: /* SYS_TEST_OSC0 */
case 0xc4: /* SYS_TEST_OSC1 */
case 0xc8: /* SYS_TEST_OSC2 */
case 0xcc: /* SYS_TEST_OSC3 */
case 0xd0: /* SYS_TEST_OSC4 */
return 0;
default:
printf ("vpb_sys_read: Bad register offset 0x%x\n", offset);
return 0;
}
}
static void vpb_sys_write(void *opaque, target_phys_addr_t offset,
uint32_t val)
{
vpb_sys_state *s = (vpb_sys_state *)opaque;
offset -= s->base;
switch (offset) {
case 0x08: /* LED */
s->leds = val;
case 0x0c: /* OSC0 */
case 0x10: /* OSC1 */
case 0x14: /* OSC2 */
case 0x18: /* OSC3 */
case 0x1c: /* OSC4 */
/* ??? */
break;
case 0x20: /* LOCK */
if (val == LOCK_VALUE)
s->lockval = val;
else
s->lockval = val & 0x7fff;
break;
case 0x28: /* CFGDATA1 */
/* ??? Need to implement this. */
s->cfgdata1 = val;
break;
case 0x2c: /* CFGDATA2 */
/* ??? Need to implement this. */
s->cfgdata2 = val;
break;
case 0x30: /* FLAGSSET */
s->flags |= val;
break;
case 0x34: /* FLAGSCLR */
s->flags &= ~val;
break;
case 0x38: /* NVFLAGSSET */
s->nvflags |= val;
break;
case 0x3c: /* NVFLAGSCLR */
s->nvflags &= ~val;
break;
case 0x40: /* RESETCTL */
if (s->lockval == LOCK_VALUE) {
s->resetlevel = val;
if (val & 0x100)
cpu_abort(cpu_single_env, "Board reset\n");
}
break;
case 0x44: /* PCICTL */
/* nothing to do. */
break;
case 0x4c: /* FLASH */
case 0x50: /* CLCD */
case 0x54: /* CLCDSER */
case 0x64: /* DMAPSR0 */
case 0x68: /* DMAPSR1 */
case 0x6c: /* DMAPSR2 */
case 0x8c: /* OSCRESET0 */
case 0x90: /* OSCRESET1 */
case 0x94: /* OSCRESET2 */
case 0x98: /* OSCRESET3 */
case 0x9c: /* OSCRESET4 */
break;
default:
printf ("vpb_sys_write: Bad register offset 0x%x\n", offset);
return;
}
}
static CPUReadMemoryFunc *vpb_sys_readfn[] = {
vpb_sys_read,
vpb_sys_read,
vpb_sys_read
};
static CPUWriteMemoryFunc *vpb_sys_writefn[] = {
vpb_sys_write,
vpb_sys_write,
vpb_sys_write
};
static vpb_sys_state *vpb_sys_init(uint32_t base)
{
vpb_sys_state *s;
int iomemtype;
s = (vpb_sys_state *)qemu_mallocz(sizeof(vpb_sys_state));
if (!s)
return NULL;
s->base = base;
iomemtype = cpu_register_io_memory(0, vpb_sys_readfn,
vpb_sys_writefn, s);
cpu_register_physical_memory(base, 0x00000fff, iomemtype);
/* ??? Save/restore. */
return s;
}
/* Board init. */
/* The AB and PB boards both use the same core, just with different
peripherans and expansion busses. For now we emulate a subset of the
PB peripherals and just change the board ID. */
static void versatile_init(int ram_size, int vga_ram_size, int boot_device,
DisplayState *ds, const char **fd_filename, int snapshot,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, int board_id)
{
CPUState *env;
void *pic;
void *sic;
void *scsi_hba;
PCIBus *pci_bus;
NICInfo *nd;
int n;
int done_smc = 0;
env = cpu_init();
cpu_arm_set_model(env, ARM_CPUID_ARM926);
/* ??? RAM shoud repeat to fill physical memory space. */
/* SDRAM at address zero. */
cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);
vpb_sys_init(0x10000000);
pic = arm_pic_init_cpu(env);
pic = pl190_init(0x10140000, pic, ARM_PIC_CPU_IRQ, ARM_PIC_CPU_FIQ);
sic = vpb_sic_init(0x10003000, pic, 31);
pl050_init(0x10006000, sic, 3, 0);
pl050_init(0x10007000, sic, 4, 1);
pci_bus = pci_vpb_init(sic);
/* The Versatile PCI bridge does not provide access to PCI IO space,
so many of the qemu PCI devices are not useable. */
for(n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
if (!nd->model)
nd->model = done_smc ? "rtl8139" : "smc91c111";
if (strcmp(nd->model, "smc91c111") == 0) {
smc91c111_init(nd, 0x10010000, sic, 25);
} else {
pci_nic_init(pci_bus, nd);
}
}
if (usb_enabled) {
usb_ohci_init(pci_bus, 3, -1);
}
scsi_hba = lsi_scsi_init(pci_bus, -1);
for (n = 0; n < MAX_DISKS; n++) {
if (bs_table[n]) {
lsi_scsi_attach(scsi_hba, bs_table[n], n);
}
}
pl011_init(0x101f1000, pic, 12, serial_hds[0]);
pl011_init(0x101f2000, pic, 13, serial_hds[1]);
pl011_init(0x101f3000, pic, 14, serial_hds[2]);
pl011_init(0x10009000, sic, 6, serial_hds[3]);
pl080_init(0x10130000, pic, 17);
sp804_init(0x101e2000, pic, 4);
sp804_init(0x101e3000, pic, 5);
/* The versatile/PB actually has a modified Color LCD controller
that includes hardware cursor support from the PL111. */
pl110_init(ds, 0x10120000, pic, 16, 1);
/* Memory map for Versatile/PB: */
/* 0x10000000 System registers. */
/* 0x10001000 PCI controller config registers. */
/* 0x10002000 Serial bus interface. */
/* 0x10003000 Secondary interrupt controller. */
/* 0x10004000 AACI (audio). */
/* 0x10005000 MMCI0. */
/* 0x10006000 KMI0 (keyboard). */
/* 0x10007000 KMI1 (mouse). */
/* 0x10008000 Character LCD Interface. */
/* 0x10009000 UART3. */
/* 0x1000a000 Smart card 1. */
/* 0x1000b000 MMCI1. */
/* 0x10010000 Ethernet. */
/* 0x10020000 USB. */
/* 0x10100000 SSMC. */
/* 0x10110000 MPMC. */
/* 0x10120000 CLCD Controller. */
/* 0x10130000 DMA Controller. */
/* 0x10140000 Vectored interrupt controller. */
/* 0x101d0000 AHB Monitor Interface. */
/* 0x101e0000 System Controller. */
/* 0x101e1000 Watchdog Interface. */
/* 0x101e2000 Timer 0/1. */
/* 0x101e3000 Timer 2/3. */
/* 0x101e4000 GPIO port 0. */
/* 0x101e5000 GPIO port 1. */
/* 0x101e6000 GPIO port 2. */
/* 0x101e7000 GPIO port 3. */
/* 0x101e8000 RTC. */
/* 0x101f0000 Smart card 0. */
/* 0x101f1000 UART0. */
/* 0x101f2000 UART1. */
/* 0x101f3000 UART2. */
/* 0x101f4000 SSPI. */
arm_load_kernel(ram_size, kernel_filename, kernel_cmdline,
initrd_filename, board_id);
}
static void vpb_init(int ram_size, int vga_ram_size, int boot_device,
DisplayState *ds, const char **fd_filename, int snapshot,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename)
{
versatile_init(ram_size, vga_ram_size, boot_device,
ds, fd_filename, snapshot,
kernel_filename, kernel_cmdline,
initrd_filename, 0x183);
}
static void vab_init(int ram_size, int vga_ram_size, int boot_device,
DisplayState *ds, const char **fd_filename, int snapshot,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename)
{
versatile_init(ram_size, vga_ram_size, boot_device,
ds, fd_filename, snapshot,
kernel_filename, kernel_cmdline,
initrd_filename, 0x25e);
}
QEMUMachine versatilepb_machine = {
"versatilepb",
"ARM Versatile/PB (ARM926EJ-S)",
vpb_init,
};
QEMUMachine versatileab_machine = {
"versatileab",
"ARM Versatile/AB (ARM926EJ-S)",
vab_init,
};
