hw: move boards and other isolated files to hw/ARCH

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

3 files changed, 294 insertions, 1 deletions

diff --git a/hw/alpha/Makefile.objs b/hw/alpha/Makefile.objs
index af1c07fa7c..db868d2ea6 100644
--- a/hw/alpha/Makefile.objs
+++ b/hw/alpha/Makefile.objs
@@ -1,4 +1,6 @@
 obj-y = mc146818rtc.o
-obj-y += alpha_pci.o alpha_dp264.o alpha_typhoon.o
+obj-y += alpha_typhoon.o
 
 obj-y := $(addprefix ../,$(obj-y))
+
+obj-y += dp264.o pci.o
diff --git a/hw/alpha/dp264.c b/hw/alpha/dp264.c
new file mode 100644
index 0000000000..13aaa57b90
--- /dev/null
+++ b/hw/alpha/dp264.c
@@ -0,0 +1,182 @@
+/*
+ * QEMU Alpha DP264/CLIPPER hardware system emulator.
+ *
+ * Choose CLIPPER IRQ mappings over, say, DP264, MONET, or WEBBRICK
+ * variants because CLIPPER doesn't have an SMC669 SuperIO controller
+ * that we need to emulate as well.
+ */
+
+#include "hw/hw.h"
+#include "elf.h"
+#include "hw/loader.h"
+#include "hw/boards.h"
+#include "hw/alpha_sys.h"
+#include "sysemu/sysemu.h"
+#include "hw/mc146818rtc.h"
+#include "hw/ide.h"
+#include "hw/i8254.h"
+#include "hw/serial.h"
+
+#define MAX_IDE_BUS 2
+
+static uint64_t cpu_alpha_superpage_to_phys(void *opaque, uint64_t addr)
+{
+    if (((addr >> 41) & 3) == 2) {
+        addr &= 0xffffffffffull;
+    }
+    return addr;
+}
+
+/* Note that there are at least 3 viewpoints of IRQ numbers on Alpha systems.
+    (0) The dev_irq_n lines into the cpu, which we totally ignore,
+    (1) The DRIR lines in the typhoon chipset,
+    (2) The "vector" aka mangled interrupt number reported by SRM PALcode,
+    (3) The interrupt number assigned by the kernel.
+   The following function is concerned with (1) only.  */
+
+static int clipper_pci_map_irq(PCIDevice *d, int irq_num)
+{
+    int slot = d->devfn >> 3;
+
+    assert(irq_num >= 0 && irq_num <= 3);
+
+    return (slot + 1) * 4 + irq_num;
+}
+
+static void clipper_init(QEMUMachineInitArgs *args)
+{
+    ram_addr_t ram_size = args->ram_size;
+    const char *cpu_model = args->cpu_model;
+    const char *kernel_filename = args->kernel_filename;
+    const char *kernel_cmdline = args->kernel_cmdline;
+    const char *initrd_filename = args->initrd_filename;
+    AlphaCPU *cpus[4];
+    PCIBus *pci_bus;
+    ISABus *isa_bus;
+    qemu_irq rtc_irq;
+    long size, i;
+    const char *palcode_filename;
+    uint64_t palcode_entry, palcode_low, palcode_high;
+    uint64_t kernel_entry, kernel_low, kernel_high;
+
+    /* Create up to 4 cpus.  */
+    memset(cpus, 0, sizeof(cpus));
+    for (i = 0; i < smp_cpus; ++i) {
+        cpus[i] = cpu_alpha_init(cpu_model ? cpu_model : "ev67");
+    }
+
+    cpus[0]->env.trap_arg0 = ram_size;
+    cpus[0]->env.trap_arg1 = 0;
+    cpus[0]->env.trap_arg2 = smp_cpus;
+
+    /* Init the chipset.  */
+    pci_bus = typhoon_init(ram_size, &isa_bus, &rtc_irq, cpus,
+                           clipper_pci_map_irq);
+
+    rtc_init(isa_bus, 1980, rtc_irq);
+    pit_init(isa_bus, 0x40, 0, NULL);
+    isa_create_simple(isa_bus, "i8042");
+
+    /* VGA setup.  Don't bother loading the bios.  */
+    pci_vga_init(pci_bus);
+
+    /* Serial code setup.  */
+    for (i = 0; i < MAX_SERIAL_PORTS; ++i) {
+        if (serial_hds[i]) {
+            serial_isa_init(isa_bus, i, serial_hds[i]);
+        }
+    }
+
+    /* Network setup.  e1000 is good enough, failing Tulip support.  */
+    for (i = 0; i < nb_nics; i++) {
+        pci_nic_init_nofail(&nd_table[i], "e1000", NULL);
+    }
+
+    /* IDE disk setup.  */
+    {
+        DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
+        ide_drive_get(hd, MAX_IDE_BUS);
+
+        pci_cmd646_ide_init(pci_bus, hd, 0);
+    }
+
+    /* Load PALcode.  Given that this is not "real" cpu palcode,
+       but one explicitly written for the emulation, we might as
+       well load it directly from and ELF image.  */
+    palcode_filename = (bios_name ? bios_name : "palcode-clipper");
+    palcode_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, palcode_filename);
+    if (palcode_filename == NULL) {
+        hw_error("no palcode provided\n");
+        exit(1);
+    }
+    size = load_elf(palcode_filename, cpu_alpha_superpage_to_phys,
+                    NULL, &palcode_entry, &palcode_low, &palcode_high,
+                    0, EM_ALPHA, 0);
+    if (size < 0) {
+        hw_error("could not load palcode '%s'\n", palcode_filename);
+        exit(1);
+    }
+
+    /* Start all cpus at the PALcode RESET entry point.  */
+    for (i = 0; i < smp_cpus; ++i) {
+        cpus[i]->env.pal_mode = 1;
+        cpus[i]->env.pc = palcode_entry;
+        cpus[i]->env.palbr = palcode_entry;
+    }
+
+    /* Load a kernel.  */
+    if (kernel_filename) {
+        uint64_t param_offset;
+
+        size = load_elf(kernel_filename, cpu_alpha_superpage_to_phys,
+                        NULL, &kernel_entry, &kernel_low, &kernel_high,
+                        0, EM_ALPHA, 0);
+        if (size < 0) {
+            hw_error("could not load kernel '%s'\n", kernel_filename);
+            exit(1);
+        }
+
+        cpus[0]->env.trap_arg1 = kernel_entry;
+
+        param_offset = kernel_low - 0x6000;
+
+        if (kernel_cmdline) {
+            pstrcpy_targphys("cmdline", param_offset, 0x100, kernel_cmdline);
+        }
+
+        if (initrd_filename) {
+            long initrd_base, initrd_size;
+
+            initrd_size = get_image_size(initrd_filename);
+            if (initrd_size < 0) {
+                hw_error("could not load initial ram disk '%s'\n",
+                         initrd_filename);
+                exit(1);
+            }
+
+            /* Put the initrd image as high in memory as possible.  */
+            initrd_base = (ram_size - initrd_size) & TARGET_PAGE_MASK;
+            load_image_targphys(initrd_filename, initrd_base,
+                                ram_size - initrd_base);
+
+            stq_phys(param_offset + 0x100, initrd_base + 0xfffffc0000000000ULL);
+            stq_phys(param_offset + 0x108, initrd_size);
+        }
+    }
+}
+
+static QEMUMachine clipper_machine = {
+    .name = "clipper",
+    .desc = "Alpha DP264/CLIPPER",
+    .init = clipper_init,
+    .max_cpus = 4,
+    .is_default = 1,
+    DEFAULT_MACHINE_OPTIONS,
+};
+
+static void clipper_machine_init(void)
+{
+    qemu_register_machine(&clipper_machine);
+}
+
+machine_init(clipper_machine_init);
diff --git a/hw/alpha/pci.c b/hw/alpha/pci.c
new file mode 100644
index 0000000000..84628686ad
--- /dev/null
+++ b/hw/alpha/pci.c
@@ -0,0 +1,109 @@
+/*
+ * QEMU Alpha PCI support functions.
+ *
+ * Some of this isn't very Alpha specific at all.
+ *
+ * ??? Sparse memory access not implemented.
+ */
+
+#include "config.h"
+#include "hw/alpha_sys.h"
+#include "qemu/log.h"
+#include "sysemu/sysemu.h"
+
+
+/* PCI IO reads/writes, to byte-word addressable memory.  */
+/* ??? Doesn't handle multiple PCI busses.  */
+
+static uint64_t bw_io_read(void *opaque, hwaddr addr, unsigned size)
+{
+    switch (size) {
+    case 1:
+        return cpu_inb(addr);
+    case 2:
+        return cpu_inw(addr);
+    case 4:
+        return cpu_inl(addr);
+    }
+    abort();
+}
+
+static void bw_io_write(void *opaque, hwaddr addr,
+                        uint64_t val, unsigned size)
+{
+    switch (size) {
+    case 1:
+        cpu_outb(addr, val);
+        break;
+    case 2:
+        cpu_outw(addr, val);
+        break;
+    case 4:
+        cpu_outl(addr, val);
+        break;
+    default:
+        abort();
+    }
+}
+
+const MemoryRegionOps alpha_pci_bw_io_ops = {
+    .read = bw_io_read,
+    .write = bw_io_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .impl = {
+        .min_access_size = 1,
+        .max_access_size = 4,
+    },
+};
+
+/* PCI config space reads/writes, to byte-word addressable memory.  */
+static uint64_t bw_conf1_read(void *opaque, hwaddr addr,
+                              unsigned size)
+{
+    PCIBus *b = opaque;
+    return pci_data_read(b, addr, size);
+}
+
+static void bw_conf1_write(void *opaque, hwaddr addr,
+                           uint64_t val, unsigned size)
+{
+    PCIBus *b = opaque;
+    pci_data_write(b, addr, val, size);
+}
+
+const MemoryRegionOps alpha_pci_conf1_ops = {
+    .read = bw_conf1_read,
+    .write = bw_conf1_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .impl = {
+        .min_access_size = 1,
+        .max_access_size = 4,
+    },
+};
+
+/* PCI/EISA Interrupt Acknowledge Cycle.  */
+
+static uint64_t iack_read(void *opaque, hwaddr addr, unsigned size)
+{
+    return pic_read_irq(isa_pic);
+}
+
+static void special_write(void *opaque, hwaddr addr,
+                          uint64_t val, unsigned size)
+{
+    qemu_log("pci: special write cycle");
+}
+
+const MemoryRegionOps alpha_pci_iack_ops = {
+    .read = iack_read,
+    .write = special_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+    .impl = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+};