hw/riscv: Move riscv_htif model to hw/char

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move riscv_htif model to hw/char directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-8-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

3 files changed, 265 insertions, 0 deletions

diff --git a/hw/char/Kconfig b/hw/char/Kconfig
index 1d645554c7..91da92f617 100644
--- a/hw/char/Kconfig
+++ b/hw/char/Kconfig
@@ -1,6 +1,9 @@
 config ESCC
     bool
 
+config HTIF
+    bool
+
 config PARALLEL
     bool
     default y
diff --git a/hw/char/meson.build b/hw/char/meson.build
index ae27932d00..3db623eeec 100644
--- a/hw/char/meson.build
+++ b/hw/char/meson.build
@@ -34,6 +34,7 @@ softmmu_ss.add(when: 'CONFIG_SH4', if_true: files('sh_serial.c'))
 softmmu_ss.add(when: 'CONFIG_STM32F2XX_USART', if_true: files('stm32f2xx_usart.c'))
 softmmu_ss.add(when: 'CONFIG_MCHP_PFSOC_MMUART', if_true: files('mchp_pfsoc_mmuart.c'))
 
+specific_ss.add(when: 'CONFIG_HTIF', if_true: files('riscv_htif.c'))
 specific_ss.add(when: 'CONFIG_TERMINAL3270', if_true: files('terminal3270.c'))
 specific_ss.add(when: 'CONFIG_VIRTIO', if_true: files('virtio-serial-bus.c'))
 specific_ss.add(when: 'CONFIG_PSERIES', if_true: files('spapr_vty.c'))
diff --git a/hw/char/riscv_htif.c b/hw/char/riscv_htif.c
new file mode 100644
index 0000000000..ba1af1cfc4
--- /dev/null
+++ b/hw/char/riscv_htif.c
@@ -0,0 +1,261 @@
+/*
+ * QEMU RISC-V Host Target Interface (HTIF) Emulation
+ *
+ * Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
+ * Copyright (c) 2017-2018 SiFive, Inc.
+ *
+ * This provides HTIF device emulation for QEMU. At the moment this allows
+ * for identical copies of bbl/linux to run on both spike and QEMU.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/log.h"
+#include "hw/sysbus.h"
+#include "hw/char/riscv_htif.h"
+#include "hw/char/serial.h"
+#include "chardev/char.h"
+#include "chardev/char-fe.h"
+#include "qemu/timer.h"
+#include "qemu/error-report.h"
+
+#define RISCV_DEBUG_HTIF 0
+#define HTIF_DEBUG(fmt, ...)                                                   \
+    do {                                                                       \
+        if (RISCV_DEBUG_HTIF) {                                                \
+            qemu_log_mask(LOG_TRACE, "%s: " fmt "\n", __func__, ##__VA_ARGS__);\
+        }                                                                      \
+    } while (0)
+
+static uint64_t fromhost_addr, tohost_addr;
+static int address_symbol_set;
+
+void htif_symbol_callback(const char *st_name, int st_info, uint64_t st_value,
+                          uint64_t st_size)
+{
+    if (strcmp("fromhost", st_name) == 0) {
+        address_symbol_set |= 1;
+        fromhost_addr = st_value;
+        if (st_size != 8) {
+            error_report("HTIF fromhost must be 8 bytes");
+            exit(1);
+        }
+    } else if (strcmp("tohost", st_name) == 0) {
+        address_symbol_set |= 2;
+        tohost_addr = st_value;
+        if (st_size != 8) {
+            error_report("HTIF tohost must be 8 bytes");
+            exit(1);
+        }
+    }
+}
+
+/*
+ * Called by the char dev to see if HTIF is ready to accept input.
+ */
+static int htif_can_recv(void *opaque)
+{
+    return 1;
+}
+
+/*
+ * Called by the char dev to supply input to HTIF console.
+ * We assume that we will receive one character at a time.
+ */
+static void htif_recv(void *opaque, const uint8_t *buf, int size)
+{
+    HTIFState *htifstate = opaque;
+
+    if (size != 1) {
+        return;
+    }
+
+    /* TODO - we need to check whether mfromhost is zero which indicates
+              the device is ready to receive. The current implementation
+              will drop characters */
+
+    uint64_t val_written = htifstate->pending_read;
+    uint64_t resp = 0x100 | *buf;
+
+    htifstate->env->mfromhost = (val_written >> 48 << 48) | (resp << 16 >> 16);
+}
+
+/*
+ * Called by the char dev to supply special events to the HTIF console.
+ * Not used for HTIF.
+ */
+static void htif_event(void *opaque, QEMUChrEvent event)
+{
+
+}
+
+static int htif_be_change(void *opaque)
+{
+    HTIFState *s = opaque;
+
+    qemu_chr_fe_set_handlers(&s->chr, htif_can_recv, htif_recv, htif_event,
+        htif_be_change, s, NULL, true);
+
+    return 0;
+}
+
+static void htif_handle_tohost_write(HTIFState *htifstate, uint64_t val_written)
+{
+    uint8_t device = val_written >> 56;
+    uint8_t cmd = val_written >> 48;
+    uint64_t payload = val_written & 0xFFFFFFFFFFFFULL;
+    int resp = 0;
+
+    HTIF_DEBUG("mtohost write: device: %d cmd: %d what: %02" PRIx64
+        " -payload: %016" PRIx64 "\n", device, cmd, payload & 0xFF, payload);
+
+    /*
+     * Currently, there is a fixed mapping of devices:
+     * 0: riscv-tests Pass/Fail Reporting Only (no syscall proxy)
+     * 1: Console
+     */
+    if (unlikely(device == 0x0)) {
+        /* frontend syscall handler, shutdown and exit code support */
+        if (cmd == 0x0) {
+            if (payload & 0x1) {
+                /* exit code */
+                int exit_code = payload >> 1;
+                exit(exit_code);
+            } else {
+                qemu_log_mask(LOG_UNIMP, "pk syscall proxy not supported\n");
+            }
+        } else {
+            qemu_log("HTIF device %d: unknown command\n", device);
+        }
+    } else if (likely(device == 0x1)) {
+        /* HTIF Console */
+        if (cmd == 0x0) {
+            /* this should be a queue, but not yet implemented as such */
+            htifstate->pending_read = val_written;
+            htifstate->env->mtohost = 0; /* clear to indicate we read */
+            return;
+        } else if (cmd == 0x1) {
+            qemu_chr_fe_write(&htifstate->chr, (uint8_t *)&payload, 1);
+            resp = 0x100 | (uint8_t)payload;
+        } else {
+            qemu_log("HTIF device %d: unknown command\n", device);
+        }
+    } else {
+        qemu_log("HTIF unknown device or command\n");
+        HTIF_DEBUG("device: %d cmd: %d what: %02" PRIx64
+            " payload: %016" PRIx64, device, cmd, payload & 0xFF, payload);
+    }
+    /*
+     * - latest bbl does not set fromhost to 0 if there is a value in tohost
+     * - with this code enabled, qemu hangs waiting for fromhost to go to 0
+     * - with this code disabled, qemu works with bbl priv v1.9.1 and v1.10
+     * - HTIF needs protocol documentation and a more complete state machine
+
+        while (!htifstate->fromhost_inprogress &&
+            htifstate->env->mfromhost != 0x0) {
+        }
+    */
+    htifstate->env->mfromhost = (val_written >> 48 << 48) | (resp << 16 >> 16);
+    htifstate->env->mtohost = 0; /* clear to indicate we read */
+}
+
+#define TOHOST_OFFSET1 (htifstate->tohost_offset)
+#define TOHOST_OFFSET2 (htifstate->tohost_offset + 4)
+#define FROMHOST_OFFSET1 (htifstate->fromhost_offset)
+#define FROMHOST_OFFSET2 (htifstate->fromhost_offset + 4)
+
+/* CPU wants to read an HTIF register */
+static uint64_t htif_mm_read(void *opaque, hwaddr addr, unsigned size)
+{
+    HTIFState *htifstate = opaque;
+    if (addr == TOHOST_OFFSET1) {
+        return htifstate->env->mtohost & 0xFFFFFFFF;
+    } else if (addr == TOHOST_OFFSET2) {
+        return (htifstate->env->mtohost >> 32) & 0xFFFFFFFF;
+    } else if (addr == FROMHOST_OFFSET1) {
+        return htifstate->env->mfromhost & 0xFFFFFFFF;
+    } else if (addr == FROMHOST_OFFSET2) {
+        return (htifstate->env->mfromhost >> 32) & 0xFFFFFFFF;
+    } else {
+        qemu_log("Invalid htif read: address %016" PRIx64 "\n",
+            (uint64_t)addr);
+        return 0;
+    }
+}
+
+/* CPU wrote to an HTIF register */
+static void htif_mm_write(void *opaque, hwaddr addr,
+                            uint64_t value, unsigned size)
+{
+    HTIFState *htifstate = opaque;
+    if (addr == TOHOST_OFFSET1) {
+        if (htifstate->env->mtohost == 0x0) {
+            htifstate->allow_tohost = 1;
+            htifstate->env->mtohost = value & 0xFFFFFFFF;
+        } else {
+            htifstate->allow_tohost = 0;
+        }
+    } else if (addr == TOHOST_OFFSET2) {
+        if (htifstate->allow_tohost) {
+            htifstate->env->mtohost |= value << 32;
+            htif_handle_tohost_write(htifstate, htifstate->env->mtohost);
+        }
+    } else if (addr == FROMHOST_OFFSET1) {
+        htifstate->fromhost_inprogress = 1;
+        htifstate->env->mfromhost = value & 0xFFFFFFFF;
+    } else if (addr == FROMHOST_OFFSET2) {
+        htifstate->env->mfromhost |= value << 32;
+        htifstate->fromhost_inprogress = 0;
+    } else {
+        qemu_log("Invalid htif write: address %016" PRIx64 "\n",
+            (uint64_t)addr);
+    }
+}
+
+static const MemoryRegionOps htif_mm_ops = {
+    .read = htif_mm_read,
+    .write = htif_mm_write,
+};
+
+HTIFState *htif_mm_init(MemoryRegion *address_space, MemoryRegion *main_mem,
+    CPURISCVState *env, Chardev *chr)
+{
+    uint64_t base = MIN(tohost_addr, fromhost_addr);
+    uint64_t size = MAX(tohost_addr + 8, fromhost_addr + 8) - base;
+    uint64_t tohost_offset = tohost_addr - base;
+    uint64_t fromhost_offset = fromhost_addr - base;
+
+    HTIFState *s = g_malloc0(sizeof(HTIFState));
+    s->address_space = address_space;
+    s->main_mem = main_mem;
+    s->main_mem_ram_ptr = memory_region_get_ram_ptr(main_mem);
+    s->env = env;
+    s->tohost_offset = tohost_offset;
+    s->fromhost_offset = fromhost_offset;
+    s->pending_read = 0;
+    s->allow_tohost = 0;
+    s->fromhost_inprogress = 0;
+    qemu_chr_fe_init(&s->chr, chr, &error_abort);
+    qemu_chr_fe_set_handlers(&s->chr, htif_can_recv, htif_recv, htif_event,
+        htif_be_change, s, NULL, true);
+    if (address_symbol_set == 3) {
+        memory_region_init_io(&s->mmio, NULL, &htif_mm_ops, s,
+                              TYPE_HTIF_UART, size);
+        memory_region_add_subregion_overlap(address_space, base,
+                                            &s->mmio, 1);
+    }
+
+    return s;
+}