i2c: Split smbus into parts

smbus.c and smbus.h had device side code, master side code, and
smbus.h has some smbus_eeprom.c definitions.  Split them into
separate files.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>

1 files changed, 165 insertions, 0 deletions

diff --git a/hw/i2c/smbus_master.c b/hw/i2c/smbus_master.c
new file mode 100644
index 0000000000..0a6223744c
--- /dev/null
+++ b/hw/i2c/smbus_master.c
@@ -0,0 +1,165 @@
+/*
+ * QEMU SMBus host (master) emulation.
+ *
+ * This code emulates SMBus transactions from the master point of view,
+ * it runs the individual I2C transaction to do the SMBus protocol
+ * over I2C.
+ *
+ * Copyright (c) 2007 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licensed under the LGPL.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/hw.h"
+#include "hw/i2c/i2c.h"
+#include "hw/i2c/smbus_master.h"
+
+/* Master device commands.  */
+int smbus_quick_command(I2CBus *bus, uint8_t addr, int read)
+{
+    if (i2c_start_transfer(bus, addr, read)) {
+        return -1;
+    }
+    i2c_end_transfer(bus);
+    return 0;
+}
+
+int smbus_receive_byte(I2CBus *bus, uint8_t addr)
+{
+    uint8_t data;
+
+    if (i2c_start_transfer(bus, addr, 1)) {
+        return -1;
+    }
+    data = i2c_recv(bus);
+    i2c_nack(bus);
+    i2c_end_transfer(bus);
+    return data;
+}
+
+int smbus_send_byte(I2CBus *bus, uint8_t addr, uint8_t data)
+{
+    if (i2c_start_transfer(bus, addr, 0)) {
+        return -1;
+    }
+    i2c_send(bus, data);
+    i2c_end_transfer(bus);
+    return 0;
+}
+
+int smbus_read_byte(I2CBus *bus, uint8_t addr, uint8_t command)
+{
+    uint8_t data;
+    if (i2c_start_transfer(bus, addr, 0)) {
+        return -1;
+    }
+    i2c_send(bus, command);
+    if (i2c_start_transfer(bus, addr, 1)) {
+        i2c_end_transfer(bus);
+        return -1;
+    }
+    data = i2c_recv(bus);
+    i2c_nack(bus);
+    i2c_end_transfer(bus);
+    return data;
+}
+
+int smbus_write_byte(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t data)
+{
+    if (i2c_start_transfer(bus, addr, 0)) {
+        return -1;
+    }
+    i2c_send(bus, command);
+    i2c_send(bus, data);
+    i2c_end_transfer(bus);
+    return 0;
+}
+
+int smbus_read_word(I2CBus *bus, uint8_t addr, uint8_t command)
+{
+    uint16_t data;
+    if (i2c_start_transfer(bus, addr, 0)) {
+        return -1;
+    }
+    i2c_send(bus, command);
+    if (i2c_start_transfer(bus, addr, 1)) {
+        i2c_end_transfer(bus);
+        return -1;
+    }
+    data = i2c_recv(bus);
+    data |= i2c_recv(bus) << 8;
+    i2c_nack(bus);
+    i2c_end_transfer(bus);
+    return data;
+}
+
+int smbus_write_word(I2CBus *bus, uint8_t addr, uint8_t command, uint16_t data)
+{
+    if (i2c_start_transfer(bus, addr, 0)) {
+        return -1;
+    }
+    i2c_send(bus, command);
+    i2c_send(bus, data & 0xff);
+    i2c_send(bus, data >> 8);
+    i2c_end_transfer(bus);
+    return 0;
+}
+
+int smbus_read_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
+                     int len, bool recv_len, bool send_cmd)
+{
+    int rlen;
+    int i;
+
+    if (send_cmd) {
+        if (i2c_start_transfer(bus, addr, 0)) {
+            return -1;
+        }
+        i2c_send(bus, command);
+    }
+    if (i2c_start_transfer(bus, addr, 1)) {
+        if (send_cmd) {
+            i2c_end_transfer(bus);
+        }
+        return -1;
+    }
+    if (recv_len) {
+        rlen = i2c_recv(bus);
+    } else {
+        rlen = len;
+    }
+    if (rlen > len) {
+        rlen = 0;
+    }
+    for (i = 0; i < rlen; i++) {
+        data[i] = i2c_recv(bus);
+    }
+    i2c_nack(bus);
+    i2c_end_transfer(bus);
+    return rlen;
+}
+
+int smbus_write_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
+                      int len, bool send_len)
+{
+    int i;
+
+    if (len > 32) {
+        len = 32;
+    }
+
+    if (i2c_start_transfer(bus, addr, 0)) {
+        return -1;
+    }
+    i2c_send(bus, command);
+    if (send_len) {
+        i2c_send(bus, len);
+    }
+    for (i = 0; i < len; i++) {
+        i2c_send(bus, data[i]);
+    }
+    i2c_end_transfer(bus);
+    return 0;
+}