Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-8' into staging

qtest: improve ehci/uhci test
usb: misc fixes, mostly for usb3/xhci

# gpg: Signature made Mon 02 Jun 2014 15:40:34 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-8:
  xhci: order superspeed ports first
  xhci: make port reset trace point more verbose
  usb: add usb_pick_speed
  usb-host: add HAVE_STREAMS define
  usb-host: allow attaching usb3 devices to ehci
  usb: improve ehci/uhci test
  usb: move ehci register defines to header file
  usb: add uhci port status reserved bit
  usb: move uhci register defines to header file
  qtest: fix qpci_config_writel

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

4 files changed, 127 insertions, 0 deletions

diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
index 32a76876c7..31328a8157 100644
--- a/include/hw/i386/pc.h
+++ b/include/hw/i386/pc.h
@@ -271,6 +271,10 @@ bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t *);
             .driver   = "apic",\
             .property = "version",\
             .value    = stringify(0x11),\
+        },{\
+            .driver   = "nec-usb-xhci",\
+            .property = "superspeed-ports-first",\
+            .value    = "off",\
         }
 
 #define PC_COMPAT_1_7 \
diff --git a/include/hw/usb.h b/include/hw/usb.h
index 1919bdc09d..8bcab48d29 100644
--- a/include/hw/usb.h
+++ b/include/hw/usb.h
@@ -458,6 +458,7 @@ void usb_ep_combine_input_packets(USBEndpoint *ep);
 void usb_combined_input_packet_complete(USBDevice *dev, USBPacket *p);
 void usb_combined_packet_cancel(USBDevice *dev, USBPacket *p);
 
+void usb_pick_speed(USBPort *port);
 void usb_attach(USBPort *port);
 void usb_detach(USBPort *port);
 void usb_port_reset(USBPort *port);
diff --git a/include/hw/usb/ehci-regs.h b/include/hw/usb/ehci-regs.h
new file mode 100644
index 0000000000..616f1b88cc
--- /dev/null
+++ b/include/hw/usb/ehci-regs.h
@@ -0,0 +1,82 @@
+#ifndef HW_USB_EHCI_REGS_H
+#define HW_USB_EHCI_REGS_H 1
+
+/* Capability Registers Base Address - section 2.2 */
+#define CAPLENGTH        0x0000  /* 1-byte, 0x0001 reserved */
+#define HCIVERSION       0x0002  /* 2-bytes, i/f version # */
+#define HCSPARAMS        0x0004  /* 4-bytes, structural params */
+#define HCCPARAMS        0x0008  /* 4-bytes, capability params */
+#define EECP             HCCPARAMS + 1
+#define HCSPPORTROUTE1   0x000c
+#define HCSPPORTROUTE2   0x0010
+
+#define USBCMD           0x0000
+#define USBCMD_RUNSTOP   (1 << 0)      // run / Stop
+#define USBCMD_HCRESET   (1 << 1)      // HC Reset
+#define USBCMD_FLS       (3 << 2)      // Frame List Size
+#define USBCMD_FLS_SH    2             // Frame List Size Shift
+#define USBCMD_PSE       (1 << 4)      // Periodic Schedule Enable
+#define USBCMD_ASE       (1 << 5)      // Asynch Schedule Enable
+#define USBCMD_IAAD      (1 << 6)      // Int Asynch Advance Doorbell
+#define USBCMD_LHCR      (1 << 7)      // Light Host Controller Reset
+#define USBCMD_ASPMC     (3 << 8)      // Async Sched Park Mode Count
+#define USBCMD_ASPME     (1 << 11)     // Async Sched Park Mode Enable
+#define USBCMD_ITC       (0x7f << 16)  // Int Threshold Control
+#define USBCMD_ITC_SH    16            // Int Threshold Control Shift
+
+#define USBSTS           0x0004
+#define USBSTS_RO_MASK   0x0000003f
+#define USBSTS_INT       (1 << 0)      // USB Interrupt
+#define USBSTS_ERRINT    (1 << 1)      // Error Interrupt
+#define USBSTS_PCD       (1 << 2)      // Port Change Detect
+#define USBSTS_FLR       (1 << 3)      // Frame List Rollover
+#define USBSTS_HSE       (1 << 4)      // Host System Error
+#define USBSTS_IAA       (1 << 5)      // Interrupt on Async Advance
+#define USBSTS_HALT      (1 << 12)     // HC Halted
+#define USBSTS_REC       (1 << 13)     // Reclamation
+#define USBSTS_PSS       (1 << 14)     // Periodic Schedule Status
+#define USBSTS_ASS       (1 << 15)     // Asynchronous Schedule Status
+
+/*
+ *  Interrupt enable bits correspond to the interrupt active bits in USBSTS
+ *  so no need to redefine here.
+ */
+#define USBINTR              0x0008
+#define USBINTR_MASK         0x0000003f
+
+#define FRINDEX              0x000c
+#define CTRLDSSEGMENT        0x0010
+#define PERIODICLISTBASE     0x0014
+#define ASYNCLISTADDR        0x0018
+#define ASYNCLISTADDR_MASK   0xffffffe0
+
+#define CONFIGFLAG           0x0040
+
+/*
+ * Bits that are reserved or are read-only are masked out of values
+ * written to us by software
+ */
+#define PORTSC_RO_MASK       0x007001c0
+#define PORTSC_RWC_MASK      0x0000002a
+#define PORTSC_WKOC_E        (1 << 22)    // Wake on Over Current Enable
+#define PORTSC_WKDS_E        (1 << 21)    // Wake on Disconnect Enable
+#define PORTSC_WKCN_E        (1 << 20)    // Wake on Connect Enable
+#define PORTSC_PTC           (15 << 16)   // Port Test Control
+#define PORTSC_PTC_SH        16           // Port Test Control shift
+#define PORTSC_PIC           (3 << 14)    // Port Indicator Control
+#define PORTSC_PIC_SH        14           // Port Indicator Control Shift
+#define PORTSC_POWNER        (1 << 13)    // Port Owner
+#define PORTSC_PPOWER        (1 << 12)    // Port Power
+#define PORTSC_LINESTAT      (3 << 10)    // Port Line Status
+#define PORTSC_LINESTAT_SH   10           // Port Line Status Shift
+#define PORTSC_PRESET        (1 << 8)     // Port Reset
+#define PORTSC_SUSPEND       (1 << 7)     // Port Suspend
+#define PORTSC_FPRES         (1 << 6)     // Force Port Resume
+#define PORTSC_OCC           (1 << 5)     // Over Current Change
+#define PORTSC_OCA           (1 << 4)     // Over Current Active
+#define PORTSC_PEDC          (1 << 3)     // Port Enable/Disable Change
+#define PORTSC_PED           (1 << 2)     // Port Enable/Disable
+#define PORTSC_CSC           (1 << 1)     // Connect Status Change
+#define PORTSC_CONNECT       (1 << 0)     // Current Connect Status
+
+#endif /* HW_USB_EHCI_REGS_H */
diff --git a/include/hw/usb/uhci-regs.h b/include/hw/usb/uhci-regs.h
new file mode 100644
index 0000000000..c7315c5e1f
--- /dev/null
+++ b/include/hw/usb/uhci-regs.h
@@ -0,0 +1,40 @@
+#ifndef HW_USB_UHCI_REGS_H
+#define HW_USB_UHCI_REGS_H 1
+
+#define UHCI_CMD_FGR      (1 << 4)
+#define UHCI_CMD_EGSM     (1 << 3)
+#define UHCI_CMD_GRESET   (1 << 2)
+#define UHCI_CMD_HCRESET  (1 << 1)
+#define UHCI_CMD_RS       (1 << 0)
+
+#define UHCI_STS_HCHALTED (1 << 5)
+#define UHCI_STS_HCPERR   (1 << 4)
+#define UHCI_STS_HSERR    (1 << 3)
+#define UHCI_STS_RD       (1 << 2)
+#define UHCI_STS_USBERR   (1 << 1)
+#define UHCI_STS_USBINT   (1 << 0)
+
+#define TD_CTRL_SPD     (1 << 29)
+#define TD_CTRL_ERROR_SHIFT  27
+#define TD_CTRL_IOS     (1 << 25)
+#define TD_CTRL_IOC     (1 << 24)
+#define TD_CTRL_ACTIVE  (1 << 23)
+#define TD_CTRL_STALL   (1 << 22)
+#define TD_CTRL_BABBLE  (1 << 20)
+#define TD_CTRL_NAK     (1 << 19)
+#define TD_CTRL_TIMEOUT (1 << 18)
+
+#define UHCI_PORT_SUSPEND (1 << 12)
+#define UHCI_PORT_RESET (1 << 9)
+#define UHCI_PORT_LSDA  (1 << 8)
+#define UHCI_PORT_RSVD1 (1 << 7)
+#define UHCI_PORT_RD    (1 << 6)
+#define UHCI_PORT_ENC   (1 << 3)
+#define UHCI_PORT_EN    (1 << 2)
+#define UHCI_PORT_CSC   (1 << 1)
+#define UHCI_PORT_CCS   (1 << 0)
+
+#define UHCI_PORT_READ_ONLY    (0x1bb)
+#define UHCI_PORT_WRITE_CLEAR  (UHCI_PORT_CSC | UHCI_PORT_ENC)
+
+#endif /* HW_USB_UHCI_REGS_H */