migration: new message MIG_RP_MSG_RECV_BITMAP

Introducing new return path message MIG_RP_MSG_RECV_BITMAP to send
received bitmap of ramblock back to source.

This is the reply message of MIG_CMD_RECV_BITMAP, it contains not only
the header (including the ramblock name), and it was appended with the
whole ramblock received bitmap on the destination side.

When the source receives such a reply message (MIG_RP_MSG_RECV_BITMAP),
it parses it, convert it to the dirty bitmap by inverting the bits.

One thing to mention is that, when we send the recv bitmap, we are doing
these things in extra:

- converting the bitmap to little endian, to support when hosts are
  using different endianess on src/dst.

- do proper alignment for 8 bytes, to support when hosts are using
  different word size (32/64 bits) on src/dst.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-13-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

6 files changed, 221 insertions, 1 deletions

diff --git a/migration/migration.c b/migration/migration.c
index ec3bc9ae20..7c5e20b3f6 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -95,6 +95,7 @@ enum mig_rp_message_type {
 
     MIG_RP_MSG_REQ_PAGES_ID, /* data (start: be64, len: be32, id: string) */
     MIG_RP_MSG_REQ_PAGES,    /* data (start: be64, len: be32) */
+    MIG_RP_MSG_RECV_BITMAP,  /* send recved_bitmap back to source */
 
     MIG_RP_MSG_MAX
 };
@@ -524,6 +525,45 @@ void migrate_send_rp_pong(MigrationIncomingState *mis,
     migrate_send_rp_message(mis, MIG_RP_MSG_PONG, sizeof(buf), &buf);
 }
 
+void migrate_send_rp_recv_bitmap(MigrationIncomingState *mis,
+                                 char *block_name)
+{
+    char buf[512];
+    int len;
+    int64_t res;
+
+    /*
+     * First, we send the header part. It contains only the len of
+     * idstr, and the idstr itself.
+     */
+    len = strlen(block_name);
+    buf[0] = len;
+    memcpy(buf + 1, block_name, len);
+
+    if (mis->state != MIGRATION_STATUS_POSTCOPY_RECOVER) {
+        error_report("%s: MSG_RP_RECV_BITMAP only used for recovery",
+                     __func__);
+        return;
+    }
+
+    migrate_send_rp_message(mis, MIG_RP_MSG_RECV_BITMAP, len + 1, buf);
+
+    /*
+     * Next, we dump the received bitmap to the stream.
+     *
+     * TODO: currently we are safe since we are the only one that is
+     * using the to_src_file handle (fault thread is still paused),
+     * and it's ok even not taking the mutex. However the best way is
+     * to take the lock before sending the message header, and release
+     * the lock after sending the bitmap.
+     */
+    qemu_mutex_lock(&mis->rp_mutex);
+    res = ramblock_recv_bitmap_send(mis->to_src_file, block_name);
+    qemu_mutex_unlock(&mis->rp_mutex);
+
+    trace_migrate_send_rp_recv_bitmap(block_name, res);
+}
+
 MigrationCapabilityStatusList *qmp_query_migrate_capabilities(Error **errp)
 {
     MigrationCapabilityStatusList *head = NULL;
@@ -1802,6 +1842,7 @@ static struct rp_cmd_args {
     [MIG_RP_MSG_PONG]           = { .len =  4, .name = "PONG" },
     [MIG_RP_MSG_REQ_PAGES]      = { .len = 12, .name = "REQ_PAGES" },
     [MIG_RP_MSG_REQ_PAGES_ID]   = { .len = -1, .name = "REQ_PAGES_ID" },
+    [MIG_RP_MSG_RECV_BITMAP]    = { .len = -1, .name = "RECV_BITMAP" },
     [MIG_RP_MSG_MAX]            = { .len = -1, .name = "MAX" },
 };
 
@@ -1846,6 +1887,19 @@ static bool postcopy_pause_return_path_thread(MigrationState *s)
     return true;
 }
 
+static int migrate_handle_rp_recv_bitmap(MigrationState *s, char *block_name)
+{
+    RAMBlock *block = qemu_ram_block_by_name(block_name);
+
+    if (!block) {
+        error_report("%s: invalid block name '%s'", __func__, block_name);
+        return -EINVAL;
+    }
+
+    /* Fetch the received bitmap and refresh the dirty bitmap */
+    return ram_dirty_bitmap_reload(s, block);
+}
+
 /*
  * Handles messages sent on the return path towards the source VM
  *
@@ -1951,6 +2005,20 @@ retry:
             migrate_handle_rp_req_pages(ms, (char *)&buf[13], start, len);
             break;
 
+        case MIG_RP_MSG_RECV_BITMAP:
+            if (header_len < 1) {
+                error_report("%s: missing block name", __func__);
+                mark_source_rp_bad(ms);
+                goto out;
+            }
+            /* Format: len (1B) + idstr (<255B). This ends the idstr. */
+            buf[buf[0] + 1] = '\0';
+            if (migrate_handle_rp_recv_bitmap(ms, (char *)(buf + 1))) {
+                mark_source_rp_bad(ms);
+                goto out;
+            }
+            break;
+
         default:
             break;
         }
diff --git a/migration/migration.h b/migration/migration.h
index 4ea5949104..2321ea37b3 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -260,6 +260,8 @@ void migrate_send_rp_pong(MigrationIncomingState *mis,
                           uint32_t value);
 int migrate_send_rp_req_pages(MigrationIncomingState *mis, const char* rbname,
                               ram_addr_t start, size_t len);
+void migrate_send_rp_recv_bitmap(MigrationIncomingState *mis,
+                                 char *block_name);
 
 void dirty_bitmap_mig_before_vm_start(void);
 void init_dirty_bitmap_incoming_migration(void);
diff --git a/migration/ram.c b/migration/ram.c
index cb14399ef9..5542843adc 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -190,6 +190,70 @@ void ramblock_recv_bitmap_set_range(RAMBlock *rb, void *host_addr,
                       nr);
 }
 
+#define  RAMBLOCK_RECV_BITMAP_ENDING  (0x0123456789abcdefULL)
+
+/*
+ * Format: bitmap_size (8 bytes) + whole_bitmap (N bytes).
+ *
+ * Returns >0 if success with sent bytes, or <0 if error.
+ */
+int64_t ramblock_recv_bitmap_send(QEMUFile *file,
+                                  const char *block_name)
+{
+    RAMBlock *block = qemu_ram_block_by_name(block_name);
+    unsigned long *le_bitmap, nbits;
+    uint64_t size;
+
+    if (!block) {
+        error_report("%s: invalid block name: %s", __func__, block_name);
+        return -1;
+    }
+
+    nbits = block->used_length >> TARGET_PAGE_BITS;
+
+    /*
+     * Make sure the tmp bitmap buffer is big enough, e.g., on 32bit
+     * machines we may need 4 more bytes for padding (see below
+     * comment). So extend it a bit before hand.
+     */
+    le_bitmap = bitmap_new(nbits + BITS_PER_LONG);
+
+    /*
+     * Always use little endian when sending the bitmap. This is
+     * required that when source and destination VMs are not using the
+     * same endianess. (Note: big endian won't work.)
+     */
+    bitmap_to_le(le_bitmap, block->receivedmap, nbits);
+
+    /* Size of the bitmap, in bytes */
+    size = nbits / 8;
+
+    /*
+     * size is always aligned to 8 bytes for 64bit machines, but it
+     * may not be true for 32bit machines. We need this padding to
+     * make sure the migration can survive even between 32bit and
+     * 64bit machines.
+     */
+    size = ROUND_UP(size, 8);
+
+    qemu_put_be64(file, size);
+    qemu_put_buffer(file, (const uint8_t *)le_bitmap, size);
+    /*
+     * Mark as an end, in case the middle part is screwed up due to
+     * some "misterious" reason.
+     */
+    qemu_put_be64(file, RAMBLOCK_RECV_BITMAP_ENDING);
+    qemu_fflush(file);
+
+    free(le_bitmap);
+
+    if (qemu_file_get_error(file)) {
+        return qemu_file_get_error(file);
+    }
+
+    return size + sizeof(size);
+}
+
 /*
  * An outstanding page request, on the source, having been received
  * and queued
@@ -3300,6 +3364,86 @@ static bool ram_has_postcopy(void *opaque)
     return migrate_postcopy_ram();
 }
 
+/*
+ * Read the received bitmap, revert it as the initial dirty bitmap.
+ * This is only used when the postcopy migration is paused but wants
+ * to resume from a middle point.
+ */
+int ram_dirty_bitmap_reload(MigrationState *s, RAMBlock *block)
+{
+    int ret = -EINVAL;
+    QEMUFile *file = s->rp_state.from_dst_file;
+    unsigned long *le_bitmap, nbits = block->used_length >> TARGET_PAGE_BITS;
+    uint64_t local_size = nbits / 8;
+    uint64_t size, end_mark;
+
+    trace_ram_dirty_bitmap_reload_begin(block->idstr);
+
+    if (s->state != MIGRATION_STATUS_POSTCOPY_RECOVER) {
+        error_report("%s: incorrect state %s", __func__,
+                     MigrationStatus_str(s->state));
+        return -EINVAL;
+    }
+
+    /*
+     * Note: see comments in ramblock_recv_bitmap_send() on why we
+     * need the endianess convertion, and the paddings.
+     */
+    local_size = ROUND_UP(local_size, 8);
+
+    /* Add paddings */
+    le_bitmap = bitmap_new(nbits + BITS_PER_LONG);
+
+    size = qemu_get_be64(file);
+
+    /* The size of the bitmap should match with our ramblock */
+    if (size != local_size) {
+        error_report("%s: ramblock '%s' bitmap size mismatch "
+                     "(0x%"PRIx64" != 0x%"PRIx64")", __func__,
+                     block->idstr, size, local_size);
+        ret = -EINVAL;
+        goto out;
+    }
+
+    size = qemu_get_buffer(file, (uint8_t *)le_bitmap, local_size);
+    end_mark = qemu_get_be64(file);
+
+    ret = qemu_file_get_error(file);
+    if (ret || size != local_size) {
+        error_report("%s: read bitmap failed for ramblock '%s': %d"
+                     " (size 0x%"PRIx64", got: 0x%"PRIx64")",
+                     __func__, block->idstr, ret, local_size, size);
+        ret = -EIO;
+        goto out;
+    }
+
+    if (end_mark != RAMBLOCK_RECV_BITMAP_ENDING) {
+        error_report("%s: ramblock '%s' end mark incorrect: 0x%"PRIu64,
+                     __func__, block->idstr, end_mark);
+        ret = -EINVAL;
+        goto out;
+    }
+
+    /*
+     * Endianess convertion. We are during postcopy (though paused).
+     * The dirty bitmap won't change. We can directly modify it.
+     */
+    bitmap_from_le(block->bmap, le_bitmap, nbits);
+
+    /*
+     * What we received is "received bitmap". Revert it as the initial
+     * dirty bitmap for this ramblock.
+     */
+    bitmap_complement(block->bmap, block->bmap, nbits);
+
+    trace_ram_dirty_bitmap_reload_complete(block->idstr);
+
+    ret = 0;
+out:
+    free(le_bitmap);
+    return ret;
+}
+
 static SaveVMHandlers savevm_ram_handlers = {
     .save_setup = ram_save_setup,
     .save_live_iterate = ram_save_iterate,
diff --git a/migration/ram.h b/migration/ram.h
index 3f4b7daee8..d386f4d641 100644
--- a/migration/ram.h
+++ b/migration/ram.h
@@ -66,5 +66,8 @@ int ramblock_recv_bitmap_test(RAMBlock *rb, void *host_addr);
 bool ramblock_recv_bitmap_test_byte_offset(RAMBlock *rb, uint64_t byte_offset);
 void ramblock_recv_bitmap_set(RAMBlock *rb, void *host_addr);
 void ramblock_recv_bitmap_set_range(RAMBlock *rb, void *host_addr, size_t nr);
+int64_t ramblock_recv_bitmap_send(QEMUFile *file,
+                                  const char *block_name);
+int ram_dirty_bitmap_reload(MigrationState *s, RAMBlock *rb);
 
 #endif
diff --git a/migration/savevm.c b/migration/savevm.c
index 9f4a95d411..7176b350d5 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1852,7 +1852,7 @@ static int loadvm_handle_recv_bitmap(MigrationIncomingState *mis,
         return -EINVAL;
     }
 
-    /* TODO: send the bitmap back to source */
+    migrate_send_rp_recv_bitmap(mis, block_name);
 
     trace_loadvm_handle_recv_bitmap(block_name);
 
diff --git a/migration/trace-events b/migration/trace-events
index 5bee6d525a..72e57089f3 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -79,6 +79,8 @@ ram_load_postcopy_loop(uint64_t addr, int flags) "@%" PRIx64 " %x"
 ram_postcopy_send_discard_bitmap(void) ""
 ram_save_page(const char *rbname, uint64_t offset, void *host) "%s: offset: 0x%" PRIx64 " host: %p"
 ram_save_queue_pages(const char *rbname, size_t start, size_t len) "%s: start: 0x%zx len: 0x%zx"
+ram_dirty_bitmap_reload_begin(char *str) "%s"
+ram_dirty_bitmap_reload_complete(char *str) "%s"
 
 # migration/migration.c
 await_return_path_close_on_source_close(void) ""
@@ -90,6 +92,7 @@ migrate_fd_cancel(void) ""
 migrate_handle_rp_req_pages(const char *rbname, size_t start, size_t len) "in %s at 0x%zx len 0x%zx"
 migrate_pending(uint64_t size, uint64_t max, uint64_t pre, uint64_t compat, uint64_t post) "pending size %" PRIu64 " max %" PRIu64 " (pre = %" PRIu64 " compat=%" PRIu64 " post=%" PRIu64 ")"
 migrate_send_rp_message(int msg_type, uint16_t len) "%d: len %d"
+migrate_send_rp_recv_bitmap(char *name, int64_t size) "block '%s' size 0x%"PRIi64
 migration_completion_file_err(void) ""
 migration_completion_postcopy_end(void) ""
 migration_completion_postcopy_end_after_complete(void) ""