diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/specs/pci-ids.txt | 3 | ||||
| -rw-r--r-- | docs/usb-storage.txt | 2 | ||||
| -rw-r--r-- | docs/usb2.txt | 2 |
3 files changed, 5 insertions, 2 deletions
diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index fd27c677d4..16fdb0c93f 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -57,7 +57,10 @@ PCI devices (other than virtio): 1b36:0005 PCI test device (docs/specs/pci-testdev.txt) 1b36:0006 PCI Rocker Ethernet switch device 1b36:0007 PCI SD Card Host Controller Interface (SDHCI) +1b36:0008 PCIe host bridge +1b36:0009 PCI Expander Bridge (-device pxb) 1b36:000a PCI-PCI bridge (multiseat) +1b36:000b PCIe Expander Bridge (-device pxb-pcie) All these devices are documented in docs/specs. diff --git a/docs/usb-storage.txt b/docs/usb-storage.txt index fbc1f2edd8..551af6f88b 100644 --- a/docs/usb-storage.txt +++ b/docs/usb-storage.txt @@ -34,7 +34,7 @@ with tree logical units: Number three emulates the classic bulk-only transport protocol too. It's called "usb-bot". It shares most code with "usb-storage", and the guest will not be able to see the difference. The qemu command -line interface is simliar to usb-uas though, i.e. no automatic scsi +line interface is similar to usb-uas though, i.e. no automatic scsi disk creation. It also features support for up to 16 LUNs. The LUN numbers must be continuous, i.e. for three devices you must use 0+1+2. The 0+1+5 numbering from the "usb-uas" example isn't going to work diff --git a/docs/usb2.txt b/docs/usb2.txt index c7a445afcd..b9e7548073 100644 --- a/docs/usb2.txt +++ b/docs/usb2.txt @@ -19,7 +19,7 @@ the controller so the USB 2.0 bus gets a individual name, for example '-device usb-ehci,id=ehci". This will give you a USB 2.0 bus named "ehci.0". -I strongly recomment to also use -device to attach usb devices because +I strongly recommend to also use -device to attach usb devices because you can specify the bus they should be attached to this way. Here is a complete example: |