summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* hw/block/nvme: refactor the logic for zone write checksKlaus Jensen2021-02-082-24/+26
| | | | | | | | | | | | | | | | | | | Refactor the zone write check logic such that the most "meaningful" error is returned first. That is, first, if the zone is not writable, return an appropriate status code for that. Then, make sure we are actually writing at the write pointer and finally check that we do not cross the zone write boundary. This aligns with the "priority" of status codes for zone read checks. Also add a couple of additional descriptive trace events and remove an always true assert. Cc: Dmitry Fomichev <dmitry.fomichev@wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: fix zone boundary check for appendKlaus Jensen2021-02-081-22/+24
| | | | | | | | | | | | | | | | | | | | | | | When a zone append is processed the controller checks that validity of the write before assigning the LBA to the append command. This causes the boundary check to be wrong. Fix this by checking the write *after* assigning the LBA. Remove the append special case from the nvme_check_zone_write and open code it in nvme_do_write, assigning the slba when basic sanity checks have been performed. Then check the validity of the resulting write like any other write command. In the process, also fix a missing endianness conversion for the zone append ALBA. Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Dmitry Fomichev <dmitry.fomichev@wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: fix wrong parameter name 'cross_read'Minwoo Im2021-02-081-1/+1
| | | | | | | The actual parameter name is 'cross_read' rather than 'cross_zone_read'. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: align with existing styleGollu Appalanaidu2021-02-081-10/+10
| | | | | | | | | | | | Change status checks to align with the existing style and remove the explicit check against NVME_SUCCESS. Cc: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: fix set feature save field checkGollu Appalanaidu2021-02-081-1/+1
| | | | | | | | | | | Currently, no features are saveable, so the current check is not wrong, but add a check against the feature capabilities to make sure this will not regress if saveable features are added later. Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: fix set feature for error recoveryGollu Appalanaidu2021-02-081-1/+3
| | | | | | | | | Only enable DULBE if the namespace supports it. Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: error if drive less than a zone sizeMinwoo Im2021-02-081-0/+7
| | | | | | | | | | | | | If a user assigns a backing device with less capacity than the size of a single zone, the namespace capacity will be reported as zero and the kernel will silently fail to allocate the namespace. This patch errors out in case that the backing device cannot accomodate at least a single zone. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> [k.jensen: small fixup in the error and commit message] Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: lift cmb restrictionsKlaus Jensen2021-02-081-31/+2Star
| | | | | | | | | | | The controller now implements v1.4 and we can lift the restrictions on CMB Data Pointer and Command Independent Locations Support (CDPCILS) and CMB Data Pointer Mixed Locations Support (CDPMLS) since the device really does not care about mixed host/cmb pointers in those cases. Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: bump to v1.4Klaus Jensen2021-02-082-3/+5
| | | | | | | | | | | With the new CMB logic in place, bump the implemented specification version to v1.4 by default. This requires adding the setting the CNTRLTYPE field and modifying the VWC field since 0x00 is no longer a valid value for bits 2:1. Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: move cmb logic to v1.4Padmakar Kalghatgi2021-02-084-39/+183
| | | | | | | | | | | | | | | Implement v1.4 logic for configuring the Controller Memory Buffer. By default, the v1.4 scheme will be used (CMB must be explicitly enabled by the host), so drivers that only support v1.3 will not be able to use the CMB anymore. To retain the v1.3 behavior, set the boolean 'legacy-cmb' nvme device parameter. Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Padmakar Kalghatgi <p.kalghatgi@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: add PMR RDS/WDS supportNaveen Nagar2021-02-082-22/+106
| | | | | | | | | Add support for the PMRMSCL and PMRMSCU MMIO registers. This allows adding RDS/WDS support for PMR as well. Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Naveen Nagar <naveen.n1@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: disable PMR at boot upKlaus Jensen2021-02-081-2/+12
| | | | | | | | | The PMR should not be enabled at boot up. Disable the PMR MemoryRegion initially and implement MMIO for PMRCTL, allowing the host to enable the PMR explicitly. Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: remove redundant zeroing of PMR registersKlaus Jensen2021-02-081-34/+0Star
| | | | | | | | | The controller registers are initially zero. Remove the redundant zeroing. Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: rename PMR/CMB shift/mask fieldsKlaus Jensen2021-02-082-10/+10
| | | | | | | | Use the correct field names. Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: allow cmb and pmr to coexistKlaus Jensen2021-02-081-9/+8Star
| | | | | | | | | With BAR 4 now free to use, allow PMR and CMB to be enabled simultaneously. Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: move msix table and pba to BAR 0Klaus Jensen2021-02-082-2/+22
| | | | | | | | | | | | | | | | | In the interest of supporting both CMB and PMR to be enabled on the same device, move the MSI-X table and pending bit array out of BAR 4 and into BAR 0. This is a simplified version of the patch contributed by Andrzej Jakowski (see [1]). Leaving the CMB at offset 0 removes the need for changes to CMB address mapping code. [1]: https://lore.kernel.org/qemu-devel/20200729220107.37758-3-andrzej.jakowski@linux.intel.com/ Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Tested-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: indicate CMB support through controller capabilities registerAndrzej Jakowski2021-02-082-3/+8
| | | | | | | | | | | | This patch sets CMBS bit in controller capabilities register when user configures NVMe driver with CMB support, so capabilites are correctly reported to guest OS. Signed-off-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com> Reviewed-by: Maxim Levitsky <mlevitsky@gmail.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: fix 64 bit register hi/lo split writesKlaus Jensen2021-02-081-4/+6
| | | | | | | | | | | | | | | 64 bit registers like ASQ and ACQ should be writable by both a hi/lo 32 bit write combination as well as a plain 64 bit write. The spec does not define ordering on the hi/lo split, but the code currently assumes that the low order bits are written first. Additionally, the code does not consider that another address might already have been written into the register, causing the OR'ing to result in a bad address. Fix this by explicitly overwriting only the low or high order bits for 32 bit writes. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
* hw/block/nvme: add size to mmio read/write trace eventsKlaus Jensen2021-02-082-4/+4
| | | | | | | | Add the size of the mmio read/write to the trace event. Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: trigger async event during injecting smart warningzhenwei pi2021-02-082-7/+42
| | | | | | | | | | | | During smart critical warning injection by setting property from QMP command, also try to trigger asynchronous event. Suggested by Keith, if a event has already been raised, there is no need to enqueue the duplicate event any more. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> [k.jensen: fix typo in commit message] Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: add smart_critical_warning propertyzhenwei pi2021-02-083-3/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a very low probability that hitting physical NVMe disk hardware critical warning case, it's hard to write & test a monitor agent service. For debugging purposes, add a new 'smart_critical_warning' property to emulate this situation. The orignal version of this change is implemented by adding a fixed property which could be initialized by QEMU command line. Suggested by Philippe & Klaus, rework like current version. Test with this patch: 1, change smart_critical_warning property for a running VM: #virsh qemu-monitor-command nvme-upstream '{ "execute": "qom-set", "arguments": { "path": "/machine/peripheral-anon/device[0]", "property": "smart_critical_warning", "value":16 } }' 2, run smartctl in guest #smartctl -H -l error /dev/nvme0n1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! - volatile memory backup device has failed Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* nvme: introduce bit 5 for critical warningzhenwei pi2021-02-081-0/+1
| | | | | | | | | | According to NVM Express v1.4, Section 5.14.1.2 ("SMART / Health Information"), introduce bit 5 for "Persistent Memory Region has become read-only or unreliable". Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> [k.jensen: minor brush ups in commit message] Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: fix zone write finalizeKlaus Jensen2021-02-081-5/+5
| | | | | | | | | | The zone write pointer is unconditionally advanced, even for write faults. Make sure that the zone is always transitioned to Full if the write pointer reaches zone capacity. Cc: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: remove unused argument in nvme_ns_setupMinwoo Im2021-02-083-4/+4
| | | | | | | | nvme_ns_setup() finally does not have nothing to do with NvmeCtrl instance. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: split setup and register for namespaceMinwoo Im2021-02-081-4/+7
| | | | | | | | | | | | | | | | | | | In NVMe, namespace is being attached to process I/O. We register NVMe namespace to a controller via nvme_register_namespace() during nvme_ns_setup(). This is main reason of receiving NvmeCtrl object instance to this function to map the namespace to a controller. To make namespace instance more independent, it should be split into two parts: setup and register. This patch split them into two differnt parts, and finally nvme_ns_setup() does not have nothing to do with NvmeCtrl instance at all. This patch is a former patch to introduce NVMe subsystem scheme to the existing design especially for multi-path. In that case, it should be split into two to make namespace independent from a controller. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: remove unused argument in nvme_ns_init_blkMinwoo Im2021-02-081-2/+2
| | | | | | | Removed no longer used aregument NvmeCtrl object in nvme_ns_init_blk(). Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: open code for volatile write cacheMinwoo Im2021-02-083-8/+12
| | | | | | | | | | | | | | | Volatile Write Cache(VWC) feature is set in nvme_ns_setup() in the initial time. This feature is related to block device backed, but this feature is controlled in controller level via Set/Get Features command. This patch removed dependency between nvme and nvme-ns to manage the VWC flag value. Also, it open coded the Get Features for VWC to check all namespaces attached to the controller, and if false detected, return directly false. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> [k.jensen: report write cache preset if present on ANY namespace] Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: remove unused argument in nvme_ns_init_zonedMinwoo Im2021-02-081-2/+2
| | | | | | | nvme_ns_init_zoned() has no use for given NvmeCtrl object. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: Correct error status for unaligned ZADmitry Fomichev2021-02-081-1/+1
| | | | | | | | | | | | TP 4053 says (in section 2.3.1.1) - ... if a Zone Append command specifies a ZSLBA that is not the lowest logical block address in that zone, then the controller shall abort that command with a status code of Invalid Field In Command. In the code, Zone Invalid Write is returned instead, fix this. Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: remove unnecessary check for appendKlaus Jensen2021-02-081-4/+0Star
| | | | | | | | | nvme_io_cmd already checks if the namespace supports the Zone Append command, so the removed check is dead code. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Tested-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
* hw/block/nvme: add missing string representations for commandsKlaus Jensen2021-02-081-0/+4
| | | | | | | | Add missing string representations for a couple of new commands. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Tested-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
* hw/block/nvme: zero out zones on resetKlaus Jensen2021-02-082-36/+111
| | | | | | | | | | | | | The zoned command set specification states that "All logical blocks in a zone *shall* be marked as deallocated when [the zone is reset]". Since the device guarantees 0x00 to be read from deallocated blocks we have to issue a pwrite_zeroes since we cannot be sure that a discard will do anything. But typically, this will be achieved with an efficient unmap/discard operation. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Tested-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
* hw/block/nvme: enum style fixKlaus Jensen2021-02-083-14/+13Star
| | | | | | | | Align with existing style and use a typedef for header-file enums. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Tested-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
* hw/block/nvme: merge implicitly/explicitly opened processing masksKlaus Jensen2021-02-081-16/+11Star
| | | | | | | | | Implicitly and explicitly opended zones are always bulk processed together, so merge the two processing masks. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Tested-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
* hw/block/nvme: fix shutdown/reset logicKlaus Jensen2021-02-081-7/+5Star
| | | | | | | | | | | | | A shutdown is only about flushing stuff. It is the host that should delete any queues, so do not perform a reset here. Also, on shutdown, make sure that the PMR is flushed if in use. Fixes: 368f4e752cf9 ("hw/block/nvme: Process controller reset and shutdown differently") Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Tested-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
* hw/block/nvme: conditionally enable DULBE for zoned namespacesKlaus Jensen2021-02-081-0/+17
| | | | | | | | | | | | | | The device uses the BDRV_BLOCK_ZERO flag to determine the "deallocated" status of logical blocks. Since the zoned namespaces command set specification defines that logical blocks SHALL be marked as deallocated when the zone is in the Empty or Offline states, DULBE can only be supported if the zone size is a multiple of the calculated deallocation granularity (reported in NPDG) which depends on the underlying block device cluster size (if applicable) or the configured discard_granularity. Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: fix for non-msix machinesKlaus Jensen2021-02-081-9/+22
| | | | | | | | | | | | | | | Commit 1c0c2163aa08 ("hw/block/nvme: verify msix_init_exclusive_bar() return value") had the unintended effect of breaking support on several platforms not supporting MSI-X. Still check for errors, but only report that MSI-X is unsupported instead of bailing out. Fixes: 1c0c2163aa08 ("hw/block/nvme: verify msix_init_exclusive_bar() return value") Fixes: fbf2e5375e33 ("hw/block/nvme: Verify msix_vector_use() returned value") Reported-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: Document zoned parameters in usage textDmitry Fomichev2021-02-081-5/+38
| | | | | | | | | | | | | Added brief descriptions of the new device properties that are now available to users to configure features of Zoned Namespace Command Set in the emulator. This patch is for documentation only, no functionality change. Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: Support Zone Descriptor ExtensionsDmitry Fomichev2021-02-084-4/+84
| | | | | | | | | | | | | | | | | | Zone Descriptor Extension is a label that can be assigned to a zone. It can be set to an Empty zone and it stays assigned until the zone is reset. This commit adds a new optional module property, "zoned.descr_ext_size". Its value must be a multiple of 64 bytes. If this value is non-zero, it becomes possible to assign extensions of that size to any Empty zones. The default value for this property is 0, therefore setting extensions is disabled by default. Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: Introduce max active and open zone limitsDmitry Fomichev2021-02-084-2/+164
| | | | | | | | | | | | | | Add two module properties, "zoned.max_active" and "zoned.max_open" to control the maximum number of zones that can be active or open. Once these variables are set to non-default values, these limits are checked during I/O and Too Many Active or Too Many Open command status is returned if they are exceeded. Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: Support Zoned Namespace Command SetDmitry Fomichev2021-02-085-8/+1040
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The emulation code has been changed to advertise NVM Command Set when "zoned" device property is not set (default) and Zoned Namespace Command Set otherwise. Define values and structures that are needed to support Zoned Namespace Command Set (NVMe TP 4053) in PCI NVMe controller emulator. Define trace events where needed in newly introduced code. In order to improve scalability, all open, closed and full zones are organized in separate linked lists. Consequently, almost all zone operations don't require scanning of the entire zone array (which potentially can be quite large) - it is only necessary to enumerate one or more zone lists. Handlers for three new NVMe commands introduced in Zoned Namespace Command Set specification are added, namely for Zone Management Receive, Zone Management Send and Zone Append. Device initialization code has been extended to create a proper configuration for zoned operation using device properties. Read/Write command handler is modified to only allow writes at the write pointer if the namespace is zoned. For Zone Append command, writes implicitly happen at the write pointer and the starting write pointer value is returned as the result of the command. Write Zeroes handler is modified to add zoned checks that are identical to those done as a part of Write flow. Subsequent commits in this series add ZDE support and checks for active and open zone limits. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com> Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Adam Manzanares <adam.manzanares@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* nvme: Make ZNS-related definitionsDmitry Fomichev2021-02-081-1/+113
| | | | | | | | | | Define values and structures that are needed to support Zoned Namespace Command Set (NVMe TP 4053). Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: Support allocated CNS command variantsNiklas Cassel2021-02-082-8/+20
| | | | | | | | | | | | | | | | | | | | | | | Many CNS commands have "allocated" command variants. These include a namespace as long as it is allocated, that is a namespace is included regardless if it is active (attached) or not. While these commands are optional (they are mandatory for controllers supporting the namespace attachment command), our QEMU implementation is more complete by actually providing support for these CNS values. However, since our QEMU model currently does not support the namespace attachment command, these new allocated CNS commands will return the same result as the active CNS command variants. The reason for not hooking up this command completely is because the NVMe specification requires the namespace management command to be supported if the namespace attachment command is supported. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: Add support for Namespace TypesNiklas Cassel2021-02-085-44/+217
| | | | | | | | | | | | | | | | | | | | | | | Define the structures and constants required to implement Namespace Types support. Namespace Types introduce a new command set, "I/O Command Sets", that allows the host to retrieve the command sets associated with a namespace. Introduce support for the command set and enable detection for the NVM Command Set. The new workflows for identify commands rely heavily on zero-filled identify structs. E.g., certain CNS commands are defined to return a zero-filled identify struct when an inactive namespace NSID is supplied. Add a helper function in order to avoid code duplication when reporting zero-filled identify structures. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: Add Commands Supported and Effects logDmitry Fomichev2021-02-084-9/+114
| | | | | | | | | | | | | | | | | | | This log page becomes necessary to implement to allow checking for Zone Append command support in Zoned Namespace Command Set. This commit adds the code to report this log page for NVM Command Set only. The parts that are specific to zoned operation will be added later in the series. All incoming admin and i/o commands are now only processed if their corresponding support bits are set in this log. This provides an easy way to control what commands to support and what not to depending on set CC.CSS. Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: Combine nvme_write_zeroes() and nvme_write()Dmitry Fomichev2021-02-082-43/+36Star
| | | | | | | | | | | Move write processing to nvme_do_write() that now handles both WRITE and WRITE ZEROES. Both nvme_write() and nvme_write_zeroes() become inline helper functions. Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: Separate read and write handlersDmitry Fomichev2021-02-082-36/+74
| | | | | | | | | | | | | | The majority of code in nvme_rw() is becoming read- or write-specific. Move these parts to two separate handlers, nvme_read() and nvme_write() to make the code more readable and to remove multiple is_write checks that has been present in the i/o path. This is a refactoring patch, no change in functionality. Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: Generate namespace UUIDsDmitry Fomichev2021-02-083-4/+7
| | | | | | | | | | | | | | In NVMe 1.4, a namespace must report an ID descriptor of UUID type if it doesn't support EUI64 or NGUID. Add a new namespace property, "uuid", that provides the user the option to either specify the UUID explicitly or have a UUID generated automatically every time a namespace is initialized. Suggested-by: Klaus Jensen <k.jensen@samsung.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: Process controller reset and shutdown differentlyDmitry Fomichev2021-02-083-8/+20
| | | | | | | | | | | | | | | | | Controller reset ans subsystem shutdown are handled very much the same in the current code, but some of the steps should be different in these two cases. Introduce two new functions, nvme_reset_ctrl() and nvme_shutdown_ctrl(), to separate some portions of the code from nvme_clear_ctrl(). The steps that are made different between reset and shutdown are that BAR.CC is not reset to zero upon the shutdown and namespace data is flushed to backing storage as a part of shutdown handling, but not upon reset. Suggested-by: Klaus Jensen <k.jensen@samsung.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/block/nvme: fix bad clearing of CAPKlaus Jensen2021-02-081-1/+0Star
| | | | | | | | | | | | | Commit 37712e00b1f0 ("hw/block/nvme: factor out pmr setup") changed the control flow such that the CAP register is erronously cleared after nvme_init_pmr() has configured it. Since the entire NvmeCtrl structure is zero-filled initially, there is no need for the explicit clearing, so just remove it. Fixes: 37712e00b1f0 ("hw/block/nvme: factor out pmr setup") Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 07:46:02 +0100