summaryrefslogtreecommitdiffstats
path: root/hw/arm/stm32f205_soc.c
Commit message (Collapse)AuthorAgeFilesLines
* hw/arm/stm32f205: Wire up sysclk and refclkPeter Maydell2021-09-011-0/+30
| | | | | | | | | | | | | | | | | | | | | Wire up the sysclk and refclk for the stm32f205 SoC. This SoC always runs the systick refclk at 1/8 the frequency of the main CPU clock, so the board code only needs to provide a single sysclk clock. Because there is only one board using this SoC, we convert the SoC and the board together, rather than splitting it into "add clock to SoC; connect clock in board; add error check in SoC code that clock is wired up". When the systick device starts honouring its clock inputs, this will fix an emulation inaccuracy in the netduino2 board where the systick reference clock was running at 1MHz rather than 15MHz. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-13-peter.maydell@linaro.org
* hw/arm: Don't allocate separate MemoryRegions in stm32 SoC realizePeter Maydell2021-09-011-10/+7Star
| | | | | | | | | | | | | | | In the realize methods of the stm32f100 and stm32f205 SoC objects, we call g_new() to create new MemoryRegion objects for the sram, flash, and flash_alias. This is unnecessary (and leaves open the possibility of leaking the allocations if we exit from realize with an error). Make these MemoryRegions member fields of the device state struct instead, as stm32f405 already does. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-11-peter.maydell@linaro.org
* hw/misc/stm32f2xx_syscfg: Remove extraneous IRQPhilippe Mathieu-Daudé2020-11-101-1/+0Star
| | | | | | | | | | | | The system configuration controller (SYSCFG) doesn't have any output IRQ (and the INTC input #71 belongs to the UART6). Remove the invalid code. Fixes: db635521a02 ("stm32f205: Add the stm32f205 SoC") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201107193403.436146-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster2020-07-101-15/+7Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
* qom: Put name parameter before value / visitor parameterMarkus Armbruster2020-07-101-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
* qdev: Use returned bool to check for qdev_realize() etc. failureMarkus Armbruster2020-07-101-14/+7Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert foo(..., &err); if (err) { ... } to if (!foo(..., &err)) { ... } for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their wrappers isa_realize_and_unref(), pci_realize_and_unref(), sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref(). Coccinelle script: @@ identifier fun = { isa_realize_and_unref, pci_realize_and_unref, qbus_realize, qdev_realize, qdev_realize_and_unref, sysbus_realize, sysbus_realize_and_unref, usb_realize_and_unref }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Nothing to convert there; skipped. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200707160613.848843-5-armbru@redhat.com>
* arm/stm32f205 arm/stm32f405: Fix realize error API violationMarkus Armbruster2020-07-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. stm32f205_soc_realize() and stm32f405_soc_realize() are wrong that way: they pass &err to object_property_set_int() without checking it, and then to qdev_realize(). Harmless, because the former can't actually fail here. Fix by passing &error_abort instead. Cc: Alistair Francis <alistair@alistair23.me> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200630090351.1247703-23-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* qdev: Convert bus-less devices to qdev_realize() with CoccinelleMarkus Armbruster2020-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All remaining conversions to qdev_realize() are for bus-less devices. Coccinelle script: // only correct for bus-less @dev! @@ expression errp; expression dev; @@ - qdev_init_nofail(dev); + qdev_realize(dev, NULL, &error_fatal); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(dev, true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
* sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2Markus Armbruster2020-06-151-18/+14Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
* hw/arm: Let devices own the MemoryRegion they createPhilippe Mathieu-Daudé2020-03-171-4/+4
| | | | | | | | | | Avoid orphan memory regions being added in the /unattached QOM container. This commit was produced with the Coccinelle script scripts/coccinelle/memory-region-housekeeping.cocci. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* hw/arm: Remove unnecessary memory_region_set_readonly() on ROM aliasPhilippe Mathieu-Daudé2020-03-171-1/+0Star
| | | | | | | This commit was produced with the Coccinelle script scripts/coccinelle/memory-region-housekeeping.cocci. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* hw/arm/stm32: Use memory_region_init_rom() with read-only regionsPhilippe Mathieu-Daudé2020-03-171-3/+1Star
| | | | | | | | | | | The scripts/coccinelle/memory-region-housekeeping.cocci reported: * TODO [[view:./hw/arm/stm32f205_soc.c::face=ovl-face1::linb=96::colb=4::cole=26][potential use of memory_region_init_rom*() in ./hw/arm/stm32f205_soc.c::96]] * TODO [[view:./hw/arm/stm32f405_soc.c::face=ovl-face1::linb=98::colb=4::cole=26][potential use of memory_region_init_rom*() in ./hw/arm/stm32f405_soc.c::98]] We can indeed replace the memory_region_init_ram() and memory_region_set_readonly() calls by memory_region_init_rom(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* qdev: set properties with device_class_set_props()Marc-André Lureau2020-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Include sysemu/sysemu.h a lot lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a "qdev: add qdev_add_vm_change_state_handler()". This is a bad idea: hw/qdev-core.h is widely included. Move the declaration of qdev_add_vm_change_state_handler() to sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h. Touching sysemu/sysemu.h now recompiles some 1800 objects. qemu/uuid.h also drops from 5400 to 1800. A few more headers show smaller improvement: qemu/notify.h drops from 5600 to 5200, qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from 5500 to 5000. Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190812052359.30071-28-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
* Include hw/qdev-properties.h lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
* Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster2019-06-121-1/+1
| | | | | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
* arm: Rename hw/arm/arm.h to hw/arm/boot.hPeter Maydell2019-05-231-1/+1
| | | | | | | | | | | | | | | | | | The header file hw/arm/arm.h now includes only declarations relating to hw/arm/boot.c functionality. Rename it accordingly, and adjust its header comment. The bulk of this commit was created via perl -pi -e 's|hw/arm/arm.h|hw/arm/boot.h|' hw/arm/*.c include/hw/arm/*.h In a few cases we can just delete the #include: hw/arm/msf2-soc.c, include/hw/arm/aspeed_soc.h and include/hw/arm/bcm2836.h did not require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190516163857.6430-4-peter.maydell@linaro.org
* hw/arm: make bitbanded IO optional on ARMv7-MStefan Hajnoczi2018-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Some ARM CPUs have bitbanded IO, a memory region that allows convenient bit access via 32-bit memory loads/stores. This eliminates the need for read-modify-update instruction sequences. This patch makes this optional feature an ARMv7MState qdev property, allowing boards to choose whether they want bitbanding or not. Status of boards: * iotkit (Cortex M33), no bitband * mps2 (Cortex M3), bitband * msf2 (Cortex M3), bitband * stellaris (Cortex M3), bitband * stm32f205 (Cortex M3), bitband As a side-effect of this patch, Peter Maydell noted that the Ethernet controller on mps2 board is now accessible. Previously they were hidden by the bitband region (which does not exist on the real board). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180814162739.11814-2-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/stm32f205_soc: Fix introspection problem with 'stm32f205-soc' deviceThomas Huth2018-07-171-16/+12Star
| | | | | | | | | | | | | | | | | | | | | | | | | Valgrind complains: echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \ "'arguments':{'typename':'stm32f205-soc'}}" \ "{'execute': 'human-monitor-command', " \ "'arguments': {'command-line': 'info qtree'}}" | \ valgrind -q aarch64-softmmu/qemu-system-aarch64 -M none,accel=qtest -qmp stdio [...] ==28531== Invalid read of size 8 ==28531== at 0x6185BA: qdev_print (qdev-monitor.c:686) ==28531== by 0x6185BA: qbus_print (qdev-monitor.c:719) ==28531== by 0x452B38: handle_hmp_command (monitor.c:3446) [...] Fix it with the new sysbus_init_child_obj() function. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1531745974-17187-16-git-send-email-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Remove checks on MAX_SERIAL_PORTS that are just bounds checksPeter Maydell2018-04-261-2/+1Star
| | | | | | | | | | | | | Remove checks on MAX_SERIAL_PORTS that were just checking whether they were within bounds for the serial_hds[] array and falling back to NULL if not. This isn't needed with the serial_hd() function, which returns NULL for all indexes beyond what the user set up. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180420145249.32435-9-peter.maydell@linaro.org
* Change references to serial_hds[] to serial_hd()Peter Maydell2018-04-261-1/+1
| | | | | | | | | | Change all the uses of serial_hds[] to go via the new serial_hd() function. Code change produced with: find hw -name '*.[ch]' | xargs sed -i -e 's/serial_hds\[\([^]]*\)\]/serial_hd(\1)/g' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20180420145249.32435-8-peter.maydell@linaro.org
* arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directlyIgor Mammedov2017-09-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | there are 2 use cases to deal with: 1: fixed CPU models per board/soc 2: boards with user configurable cpu_model and fallback to default cpu_model if user hasn't specified one explicitly For the 1st drop intermediate cpu_model parsing and use const cpu type directly, which replaces: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) object_new(typename) with object_new(FOO_CPU_TYPE_NAME) or cpu_generic_init(BASE_CPU_TYPE, "my cpu model") with cpu_create(FOO_CPU_TYPE_NAME) as result 1st use case doesn't have to invoke not necessary translation and not needed code is removed. For the 2nd 1: set default cpu type with MachineClass::default_cpu_type and 2: use generic cpu_model parsing that done before machine_init() is run and: 2.1: drop custom cpu_model parsing where pattern is: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) [parse_features(typename, cpu_model, &err) ] 2.2: or replace cpu_generic_init() which does what 2.1 does + create_cpu(typename) with just create_cpu(machine->cpu_type) as result cpu_name -> cpu_type translation is done using generic machine code one including parsing optional features if supported/present (removes a bunch of duplicated cpu_model parsing code) and default cpu type is defined in an uniform way within machine_class_init callbacks instead of adhoc places in boadr's machine_init code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* hw: Use new memory_region_init_{ram, rom, rom_device}() functionsPeter Maydell2017-07-141-5/+2Star
| | | | | | | | | | | | | | | | Use the new functions memory_region_init_{ram,rom,rom_device}() instead of manually calling the _nomigrate() version and then vmstate_register_ram_global(). Patch automatically created using coccinelle script: spatch --in-place -sp_file scripts/coccinelle/memory-region-init-ram.cocci -dir hw (As it turns out, there are no instances of the rom and rom_device functions that are caught by this script.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1499438577-7674-8-git-send-email-peter.maydell@linaro.org
* memory: Rename memory_region_init_ram() to memory_region_init_ram_nomigrate()Peter Maydell2017-07-141-2/+2
| | | | | | | | | | Rename memory_region_init_ram() to memory_region_init_ram_nomigrate(). This leaves the way clear for us to provide a memory_region_init_ram() which does handle migration. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1499438577-7674-4-git-send-email-peter.maydell@linaro.org
* stm32f205: Rename 'nvic' local to 'armv7m'Peter Maydell2017-02-281-9/+9
| | | | | | | | | | | | The local variable 'nvic' in stm32f205_soc_realize() no longer holds a direct pointer to the NVIC device; it is a pointer to the ARMv7M container object. Rename it 'armv7m' accordingly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-12-git-send-email-peter.maydell@linaro.org
* stm32f205: Create armv7m object without using armv7m_init()Peter Maydell2017-02-281-3/+13
| | | | | | | | | | | | | | | | | Switch the stm32f205 SoC to create the armv7m object directly rather than via the armv7m_init() wrapper. This fits better with the SoC model's very QOMified design. In particular this means we can push loading the guest image out to the top level board code where it belongs, rather than the SoC object having a QOM property for the filename to load. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-11-git-send-email-peter.maydell@linaro.org
* STM32F205: Connect the SPI devicesAlistair Francis2016-10-041-0/+22
| | | | | | | | | Connect the SPI devices to the STM32F205 SoC. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: d05849120420f8db0d9aa053bd23134c33cd9180.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* STM32F205: Connect the ADC devicesAlistair Francis2016-10-041-0/+35
| | | | | | | | | Connect the ADC devices to the STM32F205 SoC. Signed-off-by: Alistair Francis <alistair@alistair23.me> Message-id: 6214eda399da7b47014f6f895be25323d52dbc9e.1474742262.git.alistair@alistair23.me Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* STM32F205: Remove the individual device variablesAlistair Francis2016-10-041-18/+17Star
| | | | | | | | | | | Cleanup the individual DeviceState and SysBusDevice variables to re-use the same variable for each device. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: fc5d75a57d320b69704df2c1146ff0fd482e4a88.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/char: QOM'ify stm32f2xx_usart modelxiaoqiang zhao2016-06-061-0/+1
| | | | | | | | | | * drop qemu_char_get_next_serial and use chardev prop * change affected board code to use the new way Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465028065-5855-5-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* arm: include cpu-qom.h in files that require ARMCPUPaolo Bonzini2016-05-191-1/+0Star
| | | | | | | | This will keep things working when cpu.h will not be included indirectly almost everywhere (either directly or through qemu-common.h). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw: explicitly include qemu-common.h and cpu.hPaolo Bonzini2016-03-221-0/+2
| | | | Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster2016-03-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/arm: Clean up includesPeter Maydell2016-01-181-0/+1
| | | | | | | | | | Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1449505425-32022-4-git-send-email-peter.maydell@linaro.org
* armv7-m: Return DeviceState* from armv7m_init()Michael Davidsaver2015-11-031-7/+8
| | | | | | | | | | | Change armv7m_init to return the DeviceState* for the NVIC. This allows access to all GPIO blocks, not just the IRQ inputs. Move qdev_get_gpio_in() calls out of armv7m_init() into board code for stellaris and stm32f205 boards. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix bad error handling after memory_region_init_ram()Markus Armbruster2015-09-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
* stm32f205: Add the stm32f205 SoCAlistair Francis2015-03-111-0/+160
This patch adds the stm32f205 SoC. This will be used by the Netduino 2 to create a machine. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 48d509747a1ea0d8a7d5480560495e679990f9d2.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-16 11:11:10 +0200