summaryrefslogtreecommitdiffstats
path: root/hw/char
Commit message (Collapse)AuthorAgeFilesLines
* hw/char/serial: remove duplicate .class_init in serial_mm_infoLaurent Vivier2020-10-131-1/+0Star
| | | | | | | | | | | | | | | .class_init is already set to serial_mm_class_init. Remove the duplicate entry. Fixes: 17fd1a6490b1 ("serial-mm: add "regshift" property") Cc: marcandre.lureau@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20201009113843.60995-1-lvivier@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* hw/char/bcm2835_aux: Allow less than 32-bit accessesPhilippe Mathieu-Daudé2020-10-081-1/+3
| | | | | | | | | | | | | | | | | | | | | | | The "BCM2835 ARM Peripherals" datasheet [*] chapter 2 ("Auxiliaries: UART1 & SPI1, SPI2"), list the register sizes as 3/8/16/32 bits. We assume this means this peripheral allows 8-bit accesses. This was not an issue until commit 5d971f9e67 which reverted ("memory: accept mismatching sizes in memory_region_access_valid"). The model is implemented as 32-bit accesses (see commit 97398d900c, all registers are 32-bit) so replace MemoryRegionOps.valid as MemoryRegionOps.impl, and re-introduce MemoryRegionOps.valid with a 8/32-bit range. [*] https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Fixes: 97398d900c ("bcm2835_aux: add emulation of BCM2835 AUX (aka UART1) block") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201002181032.1899463-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/char/serial-{isa, pci}: Alias QDEV properties from generic serial objectPhilippe Mathieu-Daudé2020-09-302-3/+4
| | | | | | | | | | | Instead of overwritting the properties of the generic 'state' object, alias them. Note we can now propagate the "baudbase" property. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200907015535.827885-7-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/char/serial: Make 'wakeup' property booleanPhilippe Mathieu-Daudé2020-09-302-1/+2
| | | | | | | | | | | | | Make the "wakeup" property introduced in commit 9826fd597df ("suspend: make serial ports wakeup the guest") a boolean. As we want to reuse the generic serial properties in the ISA model (next commit), expose this property. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200907015535.827885-6-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/char/serial: Rename I/O read/write trace eventsPhilippe Mathieu-Daudé2020-09-302-4/+4
| | | | | | | | | | | | | | The serial_mm_read/write() handlers from the TYPE_SERIAL_MM device call the serial_ioport_read/write() handlers with shifted offset. When looking at the trace events from this MMIO device, it is confusing to read the accesses as I/O. Simplify using generic trace event names which make sense the various uses. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200907015535.827885-5-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/char/serial: Remove old DEBUG_SERIAL commented codePhilippe Mathieu-Daudé2020-09-301-11/+0Star
| | | | | | | | | | | All useful DPRINTF() calls have been converted to trace events. Remove a pointless one in the IOEventHandler, and drop the DEBUG_SERIAL ifdef'ry. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200907015535.827885-4-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/char/serial: Replace commented DPRINTF() by trace eventPhilippe Mathieu-Daudé2020-09-302-3/+2Star
| | | | | | | | | | Convert the old debug PRINTF() call to display the UART baudrate to a trace event. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200907015535.827885-3-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/char/serial: Assert serial_ioport_read/write offset fits 8 bytesPhilippe Mathieu-Daudé2020-09-301-2/+2
| | | | | | | | | | | | | | | | | | | The serial device has 8 registers, each 8-bit. The MemoryRegionOps 'serial_io_ops' is initialized with max_access_size=1, and all memory_region_init_io() callers correctly set the region size to 8 bytes: - serial_io_realize - serial_isa_realizefn - serial_pci_realize - multi_serial_pci_realize It is safe to assert the offset argument of serial_ioport_read() and serial_ioport_write() is always less than 8. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200907015535.827885-2-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/char/serial: Remove TYPE_SERIAL_IOPhilippe Mathieu-Daudé2020-09-301-41/+0Star
| | | | | | | | | | | | TYPE_SERIAL_IO is a subset of TYPE_SERIAL_MM, and it is not used anymore. Remove it. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200907011538.818996-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost2020-09-1813-38/+13Star
| | | | | | | | | | | | | This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Merge remote-tracking branch ↵Peter Maydell2020-09-135-0/+553
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging This PR includes multiple fixes and features for RISC-V: - Fixes a bug in printing trap causes - Allows 16-bit writes to the SiFive test device. This fixes the failure to reboot the RISC-V virt machine - Support for the Microchip PolarFire SoC and Icicle Kit - A reafactor of RISC-V code out of hw/riscv # gpg: Signature made Thu 10 Sep 2020 19:08:06 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits) hw/riscv: Sort the Kconfig options in alphabetical order hw/riscv: Drop CONFIG_SIFIVE hw/riscv: Always build riscv_hart.c hw/riscv: Move sifive_test model to hw/misc hw/riscv: Move sifive_uart model to hw/char hw/riscv: Move riscv_htif model to hw/char hw/riscv: Move sifive_plic model to hw/intc hw/riscv: Move sifive_clint model to hw/intc hw/riscv: Move sifive_gpio model to hw/gpio hw/riscv: Move sifive_u_otp model to hw/misc hw/riscv: Move sifive_u_prci model to hw/misc hw/riscv: Move sifive_e_prci model to hw/misc hw/riscv: sifive_u: Connect a DMA controller hw/riscv: clint: Avoid using hard-coded timebase frequency hw/riscv: microchip_pfsoc: Hook GPIO controllers hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 hw/net: cadence_gem: Add a new 'phy-addr' property hw/riscv: microchip_pfsoc: Connect a DMA controller hw/dma: Add SiFive platform DMA controller emulation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/riscv/trace-events
| * hw/riscv: Move sifive_uart model to hw/charBin Meng2020-09-103-0/+198
| | | | | | | | | | | | | | | | | | | | | | This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_uart model to hw/char directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-9-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
| * hw/riscv: Move riscv_htif model to hw/charBin Meng2020-09-103-0/+265
| | | | | | | | | | | | | | | | | | | | | | This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move riscv_htif model to hw/char directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
| * hw/char: Add Microchip PolarFire SoC MMUART emulationBin Meng2020-09-103-0/+90
| | | | | | | | | | | | | | | | | | | | | | Microchip PolarFire SoC MMUART is ns16550 compatible, with some additional registers. Create a simple MMUART model built on top of the existing ns16550 model. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* | Merge remote-tracking branch ↵Peter Maydell2020-09-1118-62/+99
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/ehabkost/tags/machine-next-pull-request' into staging QOM boilerplate cleanup Documentation build fix: * memory: Remove kernel-doc comment marker (Eduardo Habkost) QOM cleanups: * Rename QOM macros for consistency between TYPE_* and type checking constants (Eduardo Habkost) QOM new macros: * OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé) * DECLARE_*_CHECKER macros (Eduardo Habkost) Automated QOM boilerplate changes: * Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost * Automated changes to use OBJECT_DECLARE* (Eduardo Habkost) # gpg: Signature made Thu 10 Sep 2020 19:17:49 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: (33 commits) virtio-vga: Use typedef name for instance_size vhost-user-vga: Use typedef name for instance_size xilinx_axienet: Use typedef name for instance_size lpc_ich9: Use typedef name for instance_size omap_intc: Use typedef name for instance_size xilinx_axidma: Use typedef name for instance_size tusb6010: Rename TUSB to TUSB6010 pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312 vfio: Rename PCI_VFIO to VFIO_PCI usb: Rename USB_SERIAL_DEV to USB_SERIAL sabre: Rename SABRE_DEVICE to SABRE rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER esp: Rename ESP_STATE to ESP ahci: Rename ICH_AHCI to ICH9_AHCI vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE gpex: Fix type checking function name ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | Use DECLARE_*CHECKER* macrosEduardo Habkost2020-09-0918-31/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
| * | Move QOM typedefs and add missing includesEduardo Habkost2020-09-0918-31/+63
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* / trace-events: Fix attribution of trace points to sourceMarkus Armbruster2020-09-091-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some trace points are attributed to the wrong source file. Happens when we neglect to update trace-events for code motion, or add events in the wrong place, or misspell the file name. Clean up with help of scripts/cleanup-trace-events.pl. Funnies requiring manual post-processing: * accel/tcg/cputlb.c trace points are in trace-events. * block.c and blockdev.c trace points are in block/trace-events. * hw/block/nvme.c uses the preprocessor to hide its trace point use from cleanup-trace-events.pl. * hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to guard debug code. * include/hw/xen/xen_common.h trace points are in hw/xen/trace-events. * linux-user/trace-events abbreviates a tedious list of filenames to */signal.c. * net/colo-compare and net/filter-rewriter.c use pseudo trace points colo_compare_miscompare and colo_filter_rewriter_debug to guard debug code. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200806141334.3646302-5-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* sclpconsole: Use TYPE_* constantsEduardo Habkost2020-08-272-2/+2
| | | | | | | | | | | This will make future conversion to use OBJECT_DECLARE* easier. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200826184334.4120620-5-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* virtio-serial-bus: Move QOM macros to headerEduardo Habkost2020-08-271-4/+0Star
| | | | | | | | | | This will make future conversion to OBJECT_DECLARE* easier. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-36-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* meson: convert hw/charMarc-André Lureau2020-08-212-39/+38Star
| | | | | Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* trace: switch position of headers to what Meson requiresPaolo Bonzini2020-08-211-0/+1
| | | | | | | | | | | | | | | | | Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/char: Convert the Ibex UART to use the registerfields APIAlistair Francis2020-07-141-65/+65
| | | | | | Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 06372c9cdeec715077899e71c858d9f0a2a3395b.1594332223.git.alistair.francis@wdc.com Message-Id: <06372c9cdeec715077899e71c858d9f0a2a3395b.1594332223.git.alistair.francis@wdc.com>
* hw/char: Convert the Ibex UART to use the qdev Clock modelAlistair Francis2020-07-141-3/+27
| | | | | | | | | Conver the Ibex UART to use the recently added qdev-clock functions. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: b0136fad870a29049959ec161c1217b967d7e19d.1594332223.git.alistair.francis@wdc.com Message-Id: <b0136fad870a29049959ec161c1217b967d7e19d.1594332223.git.alistair.francis@wdc.com>
* hw/char: avr: Add limited support for USART peripheralMichael Rolnik2020-07-113-0/+324
| | | | | | | | | | | | | | | | | | | These were designed to facilitate testing but should provide enough function to be useful in other contexts. Only a subset of the functions of each peripheral is implemented, mainly due to the lack of a standard way to handle electrical connections (like GPIO pins). [AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [rth: Squash I/O size fix and file rename from f4bug] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Reviewed-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20200705140315.260514-20-huth@tuxfamily.org>
* error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster2020-07-103-12/+4Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
* qdev: Use returned bool to check for qdev_realize() etc. failureMarkus Armbruster2020-07-103-8/+4Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert foo(..., &err); if (err) { ... } to if (!foo(..., &err)) { ... } for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their wrappers isa_realize_and_unref(), pci_realize_and_unref(), sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref(). Coccinelle script: @@ identifier fun = { isa_realize_and_unref, pci_realize_and_unref, qbus_realize, qdev_realize, qdev_realize_and_unref, sysbus_realize, sysbus_realize_and_unref, usb_realize_and_unref }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Nothing to convert there; skipped. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200707160613.848843-5-armbru@redhat.com>
* qdev: Drop qbus_set_hotplug_handler() parameter @errpMarkus Armbruster2020-07-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | qbus_set_hotplug_handler() is a simple wrapper around object_property_set_link(). object_property_set_link() fails when the property doesn't exist, is not settable, or its .check() method fails. These are all programming errors here, so passing &error_abort to qbus_set_hotplug_handler() is appropriate. Most of its callers do. Exceptions: * pcie_cap_slot_init(), shpc_init(), spapr_phb_realize() pass NULL, i.e. they ignore errors. * spapr_machine_init() passes &error_fatal. * s390_pcihost_realize(), virtio_serial_device_realize(), s390_pcihost_plug() pass the error to their callers. The latter two keep going after the error, which looks wrong. Drop the @errp parameter, and instead pass &error_abort to object_property_set_link(). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-15-armbru@redhat.com>
* ibex_uart: fix XOR-as-powPaolo Bonzini2020-06-261-1/+1
| | | | | | | The xor-as-pow warning in clang actually detected a genuine bug. Fix it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/char: RX62N serial communication interface (SCI)Yoshinori Sato2020-06-223-0/+354
| | | | | | | | | | | | | | | This module supported only non FIFO type. Hardware manual. https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200224141923.82118-17-ysato@users.sourceforge.jp> [PMD: Filled VMStateField for migration] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* hw/char: Initial commit of Ibex UARTAlistair Francis2020-06-192-0/+493
| | | | | | | | | | | This is the initial commit of the Ibex UART device. Serial TX is working, while RX has been implemeneted but untested. This is based on the documentation from: https://docs.opentitan.org/hw/ip/uart/doc/ Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei<zhiwei_liu@c-sky.com>
* qdev: Convert bus-less devices to qdev_realize() with CoccinelleMarkus Armbruster2020-06-154-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All remaining conversions to qdev_realize() are for bus-less devices. Coccinelle script: // only correct for bus-less @dev! @@ expression errp; expression dev; @@ - qdev_init_nofail(dev); + qdev_realize(dev, NULL, &error_fatal); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(dev, true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
* sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster2020-06-153-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
* qom: Less verbose object_initialize_child()Markus Armbruster2020-06-154-11/+5Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
* isa: Convert uses of isa_create() with CoccinelleMarkus Armbruster2020-06-152-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace dev = isa_create(bus, type_name); ... qdev_init_nofail(dev); by dev = isa_new(type_name); ... isa_realize_and_unref(dev, bus, &error_fatal); Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. Coccinelle script: @@ expression dev, bus, expr; expression list args; expression d; @@ - dev = isa_create(bus, args); + dev = isa_new(args); ( d = &dev->qdev; | d = DEVICE(dev); ) ... when != dev = expr - qdev_init_nofail(d); + isa_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = isa_create(bus, args); + dev = isa_new(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + isa_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = DEVICE(isa_create(bus, args)); + ISADevice *isa_dev; // TODO move + isa_dev = isa_new(args); + dev = DEVICE(isa_dev); ... when != dev = expr - qdev_init_nofail(dev); + isa_realize_and_unref(isa_dev, bus, &error_fatal); Missing #include "qapi/error.h" added manually, whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-20-armbru@redhat.com>
* qdev: Convert uses of qdev_create() manuallyMarkus Armbruster2020-06-151-2/+2
| | | | | | | | | | Same transformation as in the previous commit. Manual, because convincing Coccinelle to transform these cases is somewhere between not worthwhile and infeasible (at least for me). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-11-armbru@redhat.com>
* qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster2020-06-153-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
* qdev: Convert to qdev_unrealize() with CoccinelleMarkus Armbruster2020-06-152-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | For readability, and consistency with qbus_realize(). Coccinelle script: @ depends on !(file in "hw/core/qdev.c")@ typedef DeviceState; DeviceState *dev; symbol false, error_abort; @@ - object_property_set_bool(OBJECT(dev), false, "realized", &error_abort); + qdev_unrealize(dev); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression dev; symbol false, error_abort; @@ - object_property_set_bool(OBJECT(dev), false, "realized", &error_abort); + qdev_unrealize(DEVICE(dev)); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-8-armbru@redhat.com>
* acpi: move aml builder code for parallel deviceGerd Hoffmann2020-06-091-0/+22
| | | | | | | | | Also adds support for multiple LPT devices. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200515150421.25479-8-kraxel@redhat.com>
* acpi: move aml builder code for serial deviceGerd Hoffmann2020-06-091-0/+22
| | | | | | | | | | | The code uses the isa_serial_io array to figure what the device uid is. Side effect is that acpi antries are not limited to port 1+2 any more, we'll also get entries for ports 3+4. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200515150421.25479-6-kraxel@redhat.com>
* hw/char/xilinx_uartlite: Replace hw_error() by qemu_log_mask()Philippe Mathieu-Daudé2020-05-211-2/+3
| | | | | | | | | | | | | | hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* qdev: Unrealize must not failMarkus Armbruster2020-05-155-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
* hw/char/cadence_uart: add clock supportDamien Hedde2020-04-302-10/+66
| | | | | | | | | | | | | | | | | | | Switch the cadence uart to multi-phase reset and add the reference clock input. The input clock frequency is added to the migration structure. The reference clock controls the baudrate generation. If it disabled, any input characters and events are ignored. If this clock remains unconnected, the uart behaves as before (it default to a 50MHz ref clock). Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200406135251.157596-8-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* serial: Fix double migration dataDr. David Alan Gilbert2020-04-021-1/+11
| | | | | | | | | | | | | | | | | | | | | | | After c9808d60281 we have both an object representing the serial-isa device and a separate object representing the underlying common serial uart. Both of these have vmsd's associated with them and thus the migration stream ends up with two copies of the migration data - the serial-isa includes the vmstate of the core serial. Besides being wrong, it breaks backwards migration compatibility. Fix this by removing the dc->vmsd from the core device, so it only gets migrated by any parent devices including it. Add a vmstate_serial_mm so that any device that uses serial_mm_init rather than creating a device still gets migrated. (That doesn't fix backwards migration for serial_mm_init users, but does seem to work forwards for ppce500). Fixes: c9808d60281 ('serial: realize the serial device') Buglink: https://bugs.launchpad.net/qemu/+bug/1869426 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20200330164712.198282-1-dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* virtio-serial-bus: Plug memory leak on realize() error pathsPan Nengyuan2020-03-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We neglect to free port->bh on the error paths. Fix that. Reproducer: {'execute': 'device_add', 'arguments': {'id': 'virtio_serial_pci0', 'driver': 'virtio-serial-pci', 'bus': 'pci.0', 'addr': '0x5'}, 'id': 'yVkZcGgV'} {'execute': 'device_add', 'arguments': {'id': 'port1', 'driver': 'virtserialport', 'name': 'port1', 'chardev': 'channel1', 'bus': 'virtio_serial_pci0.0', 'nr': 1}, 'id': '3dXdUgJA'} {'execute': 'device_add', 'arguments': {'id': 'port2', 'driver': 'virtserialport', 'name': 'port2', 'chardev': 'channel2', 'bus': 'virtio_serial_pci0.0', 'nr': 1}, 'id': 'qLzcCkob'} {'execute': 'device_add', 'arguments': {'id': 'port2', 'driver': 'virtserialport', 'name': 'port2', 'chardev': 'channel2', 'bus': 'virtio_serial_pci0.0', 'nr': 2}, 'id': 'qLzcCkob'} The leak stack: Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f04a8008ae8 in __interceptor_malloc (/lib64/libasan.so.5+0xefae8) #1 0x7f04a73cf1d5 in g_malloc (/lib64/libglib-2.0.so.0+0x531d5) #2 0x56273eaee484 in aio_bh_new /mnt/sdb/backup/qemu/util/async.c:125 #3 0x56273eafe9a8 in qemu_bh_new /mnt/sdb/backup/qemu/util/main-loop.c:532 #4 0x56273d52e62e in virtser_port_device_realize /mnt/sdb/backup/qemu/hw/char/virtio-serial-bus.c:946 #5 0x56273dcc5040 in device_set_realized /mnt/sdb/backup/qemu/hw/core/qdev.c:891 #6 0x56273e5ebbce in property_set_bool /mnt/sdb/backup/qemu/qom/object.c:2238 #7 0x56273e5e5a9c in object_property_set /mnt/sdb/backup/qemu/qom/object.c:1324 #8 0x56273e5ef5f8 in object_property_set_qobject /mnt/sdb/backup/qemu/qom/qom-qobject.c:26 #9 0x56273e5e5e6a in object_property_set_bool /mnt/sdb/backup/qemu/qom/object.c:1390 #10 0x56273daa40de in qdev_device_add /mnt/sdb/backup/qemu/qdev-monitor.c:680 #11 0x56273daa53e9 in qmp_device_add /mnt/sdb/backup/qemu/qdev-monitor.c:805 Fixes: 199646d81522509ac2dba6d28c31e8c7d807bc93 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Amit Shah <amit@kernel.org> Message-Id: <20200309021738.30072-1-pannengyuan@huawei.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/char: Let devices own the MemoryRegion they createPhilippe Mathieu-Daudé2020-03-171-3/+4
| | | | | | | | | | Avoid orphan memory regions being added in the /unattached QOM container. This commit was produced with the Coccinelle script scripts/coccinelle/memory-region-housekeeping.cocci. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* misc: Replace zero-length arrays with flexible array member (manual)Philippe Mathieu-Daudé2020-03-162-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Description copied from Linux kernel commit from Gustavo A. R. Silva (see [3]): --v-- description start --v-- The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member [1], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being unadvertenly introduced [2] to the Linux codebase from now on. --^-- description end --^-- Do the similar housekeeping in the QEMU codebase (which uses C99 since commit 7be41675f7cb). All these instances of code were found with the help of the following command (then manual analysis, without modifying structures only having a single flexible array member, such QEDTable in block/qed.h): git grep -F '[0];' [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f [3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1 Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_initChen Qun2020-02-131-2/+3
| | | | | | | | | | | | | | | | | | | | | | It's easy to reproduce as follow: virsh qemu-monitor-command vm1 --pretty '{"execute": "device-list-properties", "arguments":{"typename":"exynos4210.uart"}}' ASAN shows memory leak stack: #1 0xfffd896d71cb in g_malloc0 (/lib64/libglib-2.0.so.0+0x571cb) #2 0xaaad270beee3 in timer_new_full /qemu/include/qemu/timer.h:530 #3 0xaaad270beee3 in timer_new /qemu/include/qemu/timer.h:551 #4 0xaaad270beee3 in timer_new_ns /qemu/include/qemu/timer.h:569 #5 0xaaad270beee3 in exynos4210_uart_init /qemu/hw/char/exynos4210_uart.c:677 #6 0xaaad275c8f4f in object_initialize_with_type /qemu/qom/object.c:516 #7 0xaaad275c91bb in object_new_with_type /qemu/qom/object.c:684 #8 0xaaad2755df2f in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:152 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200213025603.149432-1-kuhn.chenqun@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/*/Makefile.objs: Move many .o files to common-objsThomas Huth2020-02-041-8/+8
| | | | | | | | | | | | | We have many files that apparently do not depend on the target CPU configuration, i.e. which can be put into common-obj-y instead of obj-y. This way, the code can be shared for example between qemu-system-arm and qemu-system-aarch64, or the various big and little endian variants like qemu-system-sh4 and qemu-system-sh4eb, so that we do not have to compile the code multiple times anymore. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200130133841.10779-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2020-01-2730-33/+33
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Register qdev properties as class properties (Marc-André) * Cleanups (Philippe) * virtio-scsi fix (Pan Nengyuan) * Tweak Skylake-v3 model id (Kashyap) * x86 UCODE_REV support and nested live migration fix (myself) * Advisory mode for pvpanic (Zhenwei) # gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (58 commits) build-sys: clean up flags included in the linker command line target/i386: Add the 'model-id' for Skylake -v3 CPU models qdev: use object_property_help() qapi/qmp: add ObjectPropertyInfo.default-value qom: introduce object_property_help() qom: simplify qmp_device_list_properties() vl: print default value in object help qdev: register properties as class properties qdev: move instance properties to class properties qdev: rename DeviceClass.props qdev: set properties with device_class_set_props() object: return self in object_ref() object: release all props object: add object_class_property_add_link() object: express const link with link property object: add direct link flag object: rename link "child" to "target" object: check strong flag with & object: do not free class properties object: add object_property_set_default ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 21:50:55 +0100