summaryrefslogtreecommitdiffstats
path: root/hw/mem
Commit message (Collapse)AuthorAgeFilesLines
* mem/cxl_type3: Add read and write functions for associated hostmem.Jonathan Cameron2022-05-131-0/+91
| | | | | | | | | | | | | | | | | | | | Once a read or write reaches a CXL type 3 device, the HDM decoders on the device are used to establish the Device Physical Address which should be accessed. These functions peform the required maths and then use a device specific address space to access the hostmem->mr to fullfil the actual operation. Note that failed writes are silent, but failed reads return poison. Note this is based loosely on: https://lore.kernel.org/qemu-devel/20200817161853.593247-6-f4bug@amsat.org/ [RFC PATCH 0/9] hw/misc: Add support for interleaved memory accesses Only lightly tested so far. More complex test cases yet to be written. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-33-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/cxl/device: Implement get/set Label Storage Area (LSA)Ben Widawsky2022-05-131-1/+55
| | | | | | | | | | | | | Implement get and set handlers for the Label Storage Area used to hold data describing persistent memory configuration so that it can be ensured it is seen in the same configuration after reboot. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-22-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/cxl/device: Plumb real Label Storage Area (LSA) sizingBen Widawsky2022-05-131-0/+9
| | | | | | | | | | | This should introduce no change. Subsequent work will make use of this new class member. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-21-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12)Ben Widawsky2022-05-131-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | A device's volatile and persistent memory are known Host Defined Memory (HDM) regions. The mechanism by which the device is programmed to claim the addresses associated with those regions is through dedicated logic known as the HDM decoder. In order to allow the OS to properly program the HDMs, the HDM decoders must be modeled. There are two ways the HDM decoders can be implemented, the legacy mechanism is through the PCIe DVSEC programming from CXL 1.1 (8.1.3.8), and MMIO is found in 8.2.5.12 of the spec. For now, 8.1.3.8 is not implemented. Much of CXL device logic is implemented in cxl-utils. The HDM decoder however is implemented directly by the device implementation. Whilst the implementation currently does no validity checks on the encoder set up, future work will add sanity checking specific to the type of cxl component. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-19-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/cxl/device: Add a memory device (8.2.8.5)Ben Widawsky2022-05-133-0/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | A CXL memory device (AKA Type 3) is a CXL component that contains some combination of volatile and persistent memory. It also implements the previously defined mailbox interface as well as the memory device firmware interface. Although the memory device is configured like a normal PCIe device, the memory traffic is on an entirely separate bus conceptually (using the same physical wires as PCIe, but different protocol). Once the CXL topology is fully configure and address decoders committed, the guest physical address for the memory device is part of a larger window which is owned by the platform. The creation of these windows is later in this series. The following example will create a 256M device in a 512M window: -object "memory-backend-file,id=cxl-mem1,share,mem-path=cxl-type3,size=512M" -device "cxl-type3,bus=rp0,memdev=cxl-mem1,id=cxl-pmem0" Note: Dropped PCDIMM info interfaces for now. They can be added if appropriate at a later date. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-18-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Mark remaining global TypeInfo instances as constBernhard Beschow2022-02-212-2/+2
| | | | | | | | | | | | | | | | | | | More than 1k of TypeInfo instances are already marked as const. Mark the remaining ones, too. This commit was created with: git grep -z -l 'static TypeInfo' -- '*.c' | \ xargs -0 sed -i 's/static TypeInfo/static const TypeInfo/' Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Corey Minyard <cminyard@mvista.com> Message-id: 20220117145805.173070-2-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* nvdimm: Add realize, unrealize callbacks to NVDIMMDevice classShivaprasad G Bhat2022-02-182-0/+21
| | | | | | | | | | | | A new subclass inheriting NVDIMMDevice is going to be introduced in subsequent patches. The new subclass uses the realize and unrealize callbacks. Add them on NVDIMMClass to appropriately call them as part of plug-unplug. Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <164396253158.109112.1926755104259023743.stgit@ltczzess4.aus.stglabs.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* hw/mem/pc-dimm: Restrict NUMA-specific code to NUMA machinesPhilippe Mathieu-Daudé2021-11-111-8/+15
| | | | | | | | | | | | | | | | | | | | | | | | When trying to use the pc-dimm device on a non-NUMA machine, we get: $ qemu-system-arm -M none -cpu max -S \ -object memory-backend-file,id=mem1,size=1M,mem-path=/tmp/1m \ -device pc-dimm,id=dimm1,memdev=mem1 Segmentation fault (core dumped) (gdb) bt #0 pc_dimm_realize (dev=0x555556da3e90, errp=0x7fffffffcd10) at hw/mem/pc-dimm.c:184 #1 0x0000555555fe1f8f in device_set_realized (obj=0x555556da3e90, value=true, errp=0x7fffffffce18) at hw/core/qdev.c:531 #2 0x0000555555feb4a9 in property_set_bool (obj=0x555556da3e90, v=0x555556e54420, name=0x5555563c3c41 "realized", opaque=0x555556a704f0, errp=0x7fffffffce18) at qom/object.c:2257 To avoid that crash, restrict the pc-dimm NUMA check to machines supporting NUMA, and do not allow the use of 'node' property on non-NUMA machines. Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20211106145016.611332-1-f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* kconfig: split CONFIG_SPARSE_MEM from fuzzingPaolo Bonzini2021-10-142-1/+4
| | | | | | | | | | | | | Pass CONFIG_FUZZ via host_kconfig, and use it to select the sparse-mem device. Cc: Alexander Oleinik <alxndr@bu.edu> Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20211007130829.632254-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* docs: fix references to docs/devel/tracing.rstStefano Garzarella2021-06-021-1/+1
| | | | | | | | | | | | | | | Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on'Philippe Mathieu-Daudé2021-05-261-2/+0Star
| | | | | | | | | | | | | | | Per the kconfig.rst: A device should be listed [...] ``imply`` if (depending on the QEMU command line) the board may or may not be started without it. This is the case with the NVDIMM device, so use the 'imply' weak reverse dependency to select the symbol. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210511155354.3069141-2-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Merge remote-tracking branch ↵Peter Maydell2021-05-171-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging Pull request trivial-branch 20210515 # gpg: Signature made Sat 15 May 2021 11:02:59 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: target/avr: Ignore unimplemented WDR opcode hw/avr/atmega.c: use the avr51 cpu for atmega1280 target/sh4: Return error if CPUClass::get_phys_page_debug() fails multi-process: Avoid logical AND of mutually exclusive tests hw/pci-host: Do not build gpex-acpi.c if GPEX is not selected hw/mem/meson: Fix linking sparse-mem device with fuzzer cutils: fix memory leak in get_relocated_path() hw/rtc/mc146818rtc: Convert to 3-phase reset (Resettable interface) hw/timer/etraxfs_timer: Convert to 3-phase reset (Resettable interface) hw/gpio/aspeed: spelling fix (addtional) qapi: spelling fix (addtional) virtiofsd: Fix check of chown()'s return value virtio-net: Constify VirtIOFeature feature_sizes[] virtio-blk: Constify VirtIOFeature feature_sizes[] hw/virtio: Pass virtio_feature_get_config_size() a const argument backends/tpm: Replace qemu_mutex_lock calls with QEMU_LOCK_GUARD Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/mem/meson: Fix linking sparse-mem device with fuzzerPhilippe Mathieu-Daudé2021-05-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sparse-mem.c is added to the 'mem_ss' source set, which itself is conditionally added to softmmu_ss if CONFIG_MEM_DEVICE is selected. But if CONFIG_MEM_DEVICE isn't selected, we get a link failure even if CONFIG_FUZZ is selected: /usr/bin/ld: tests_qtest_fuzz_generic_fuzz.c.o: in function `generic_pre_fuzz': tests/qtest/fuzz/generic_fuzz.c:826: undefined reference to `sparse_mem_init' clang-10: error: linker command failed with exit code 1 (use -v to see invocation) Fix by adding sparse-mem.c directly to the softmmu_ss set. Fixes: 230376d285b ("memory: add a sparse memory device for fuzzing") Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20210406133944.4193691-1-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* | Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell2021-05-161-19/+14Star
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pc,pci,virtio: bugfixes, improvements Fixes all over the place. Faster boot for virtio. ioeventfd support for mmio. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 14 May 2021 15:27:13 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: Fix build with 64 bits time_t vhost-vdpa: Make vhost_vdpa_get_device_id() static hw/virtio: enable ioeventfd configuring for mmio hw/smbios: support for type 41 (onboard devices extended information) checkpatch: Fix use of uninitialized value virtio-scsi: Configure all host notifiers in a single MR transaction virtio-scsi: Set host notifiers and callbacks separately virtio-blk: Configure all host notifiers in a single MR transaction virtio-blk: Fix rollback path in virtio_blk_data_plane_start() pc-dimm: remove unnecessary get_vmstate_memory_region() method amd_iommu: fix wrong MMIO operations virtio-net: Constify VirtIOFeature feature_sizes[] virtio-blk: Constify VirtIOFeature feature_sizes[] hw/virtio: Pass virtio_feature_get_config_size() a const argument x86: acpi: use offset instead of pointer when using build_header() amd_iommu: Fix pte_override_page_mask() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/arm/virt.c
| * pc-dimm: remove unnecessary get_vmstate_memory_region() methodMaciej S. Szmigiero2021-05-141-19/+14Star
| | | | | | | | | | | | | | | | | | | | | | | | | | The get_vmstate_memory_region() method from PCDIMMDeviceClass is only ever called from this class and is never overridden, so it can be converted into an ordinary function. This saves us from having to do an indirect call in order to reach it. Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <f42da25471dc4b967796642388294e61e6587047.1619303649.git.maciej.szmigiero@oracle.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* | Do not include exec/address-spaces.h if it's not really necessaryThomas Huth2021-05-021-1/+0Star
|/ | | | | | | | Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* memory: add a sparse memory device for fuzzingAlexander Bulekov2021-03-162-0/+152
| | | | | | | | | | | | | | For testing, it can be useful to simulate an enormous amount of memory (e.g. 2^64 RAM). This adds an MMIO device that acts as sparse memory. When something writes a nonzero value to a sparse-mem address, we allocate a block of memory. For now, since the only user of this device is the fuzzer, we do not track and free zeroed blocks. The device has a very low priority (so it can be mapped beneath actual RAM, and virtual device MMIO regions). Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* nvdimm: put it into the 'storage' categoryGan Qixin2021-02-201-0/+1
| | | | | | | | | | | The category of the nvdimm device is not set, put it into the 'storage' category. Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201130083630.2520597-5-ganqixin@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* nvdimm: check -object memory-backend-file, readonly=on optionStefan Hajnoczi2021-02-011-0/+9
| | | | | | | | | | | | | | Check that -device nvdimm,unarmed=on is used when -object memory-backend-file,readonly=on and document that -device nvdimm,unarmed=on|off controls whether the NVDIMM appears read-only to the guest. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20210104171320.575838-4-stefanha@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* qapi: More complex uses of QAPI_LIST_APPENDEric Blake2021-01-281-10/+2Star
| | | | | | | | | | | | These cases require a bit more thought to review; in each case, the code was appending to a list, but not with a FOOList **tail variable. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210113221013.390592-6-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Flawed change to qmp_guest_network_get_interfaces() dropped] Signed-off-by: Markus Armbruster <armbru@redhat.com>
* hw/*: Use type casting for SysBusDevice in NPCM7XXHao Wu2021-01-121-1/+1
| | | | | | | | | | | A device shouldn't access its parent object which is QOM internal. Instead it should use type cast for this purporse. This patch fixes this issue for all NPCM7XX Devices. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210108190945.949196-7-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* nomaintainer: Fix Lesser GPL version numberChetan Pant2020-11-152-2/+2
| | | | | | | | | | | | | | | | There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. This patch contains all the files, whose maintainer I could not get from ‘get_maintainer.pl’ script. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Adapted exec.c and qdev-monitor.c to new location] Signed-off-by: Thomas Huth <thuth@redhat.com>
* memory-device: Add get_min_alignment() callbackDavid Hildenbrand2020-11-031-2/+9
| | | | | | | | | | | | | | | | | | | | | Add a callback that can be used to express additional alignment requirements (exceeding the ones from the memory region). Will be used by virtio-mem to express special alignment requirements due to manually configured, big block sizes (e.g., 1GB with an ordinary memory-backend-ram). This avoids failing later when realizing, because auto-detection wasn't able to assign a properly aligned address. Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20201008083029.9504-6-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* memory-device: Support big alignment requirementsDavid Hildenbrand2020-11-031-4/+5
| | | | | | | | | | | | | | | | | | | | | | Let's warn instead of bailing out - the worst thing that can happen is that we'll fail hot/coldplug later. The user got warned, and this should be rare. This will be necessary for memory devices with rather big (user-defined) alignment requirements - say a virtio-mem device with a 2G block size - which will become important, for example, when supporting vfio in the future. Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20201008083029.9504-5-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* pc-dimm: Drop @errp argument of pc_dimm_plug()Greg Kurz2020-10-271-1/+1
| | | | | | | | | | | | | pc_dimm_plug() doesn't use it. It only aborts on error. Drop @errp and adapt the callers accordingly. [dwg: Removed unused label to fix compile] Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160309728447.2739814.12831204841251148202.stgit@bahia.lan> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* hw/mem: Stubbed out NPCM7xx Memory Controller modelHavard Skinnemoen2020-09-142-0/+85
| | | | | | | | | | | | | | This just implements the bare minimum to cause the boot block to skip memory initialization. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-10-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* meson: convert hw/memMarc-André Lureau2020-08-213-3/+7
| | | | | Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* trace: switch position of headers to what Meson requiresPaolo Bonzini2020-08-211-0/+1
| | | | | | | | | | | | | | | | | Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qom: Change object_get_canonical_path_component() not to mallocMarkus Armbruster2020-07-212-6/+4Star
| | | | | | | | | | | | | | | | | | | object_get_canonical_path_component() returns a malloced copy of a property name on success, null on failure. 19 of its 25 callers immediately free the returned copy. Change object_get_canonical_path_component() to return the property name directly. Since modifying the name would be wrong, adjust the return type to const char *. Drop the free from the 19 callers become simpler, add the g_strdup() to the other six. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200714160202.3121879-4-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com>
* error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster2020-07-101-3/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
* error: Avoid unnecessary error_propagate() after error_setg()Markus Armbruster2020-07-102-16/+15Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace error_setg(&err, ...); error_propagate(errp, err); by error_setg(errp, ...); Related pattern: if (...) { error_setg(&err, ...); goto out; } ... out: error_propagate(errp, err); return; When all paths to label out are that way, replace by if (...) { error_setg(errp, ...); return; } and delete the label along with the error_propagate(). When we have at most one other path that actually needs to propagate, and maybe one at the end that where propagation is unnecessary, e.g. foo(..., &err); if (err) { goto out; } ... bar(..., &err); out: error_propagate(errp, err); return; move the error_propagate() to where it's needed, like if (...) { foo(..., &err); error_propagate(errp, err); return; } ... bar(..., errp); return; and transform the error_setg() as above. In some places, the transformation results in obviously unnecessary error_propagate(). The next few commits will eliminate them. Bonus: the elimination of gotos will make later patches in this series easier to review. Candidates for conversion tracked down with this Coccinelle script: @@ identifier err, errp; expression list args; @@ - error_setg(&err, args); + error_setg(errp, args); ... when != err error_propagate(errp, err); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-34-armbru@redhat.com>
* qom: Put name parameter before value / visitor parameterMarkus Armbruster2020-07-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
* qapi: Use returned bool to check for failure, manual partMarkus Armbruster2020-07-101-6/+3Star
| | | | | | | | | | | | The previous commit used Coccinelle to convert from checking the Error object to checking the return value. Convert a few more manually. Also tweak control flow in places to conform to the conventional "if error bail out" pattern. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-20-armbru@redhat.com>
* qapi: Use returned bool to check for failure, Coccinelle partMarkus Armbruster2020-07-101-4/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous commit enables conversion of visit_foo(..., &err); if (err) { ... } to if (!visit_foo(..., errp)) { ... } for visitor functions that now return true / false on success / error. Coccinelle script: @@ identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*"; expression list args; typedef Error; Error *err; @@ - fun(args, &err); - if (err) + if (!fun(args, &err)) { ... } A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-19-armbru@redhat.com>
* nvdimm: Plug memory leak in uuid property setterMarkus Armbruster2020-05-271-1/+0Star
| | | | | | | | | | | | | nvdimm_set_uuid() leaks memory on qemu_uuid_parse() failure. Fix that. Fixes: 6c5627bb24dcd68c997857a8b671617333b1289f Cc: Xiao Guangrong <xiaoguangrong.eric@gmail.com> Cc: Shivaprasad G Bhat <sbhat@linux.ibm.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200505101908.6207-2-armbru@redhat.com> Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Reviewed-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
* qdev: Unrealize must not failMarkus Armbruster2020-05-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
* qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster2020-05-152-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
* Merge remote-tracking branch ↵Peter Maydell2020-05-051-3/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging trivial patches (20200504) Silent static analyzer warning Remove dead assignments Support -chardev serial on macOS Update MAINTAINERS Some cosmetic changes # gpg: Signature made Mon 04 May 2020 16:45:18 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.1-pull-request: hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning hw/timer/stm32f2xx_timer: Remove dead assignment hw/gpio/aspeed_gpio: Remove dead assignment hw/isa/i82378: Remove dead assignment hw/ide/sii3112: Remove dead assignment hw/input/adb-kbd: Remove dead assignment hw/i2c/pm_smbus: Remove dead assignment blockdev: Remove dead assignment block: Avoid dead assignment Compress lines for immediate return chardev: Add macOS to list of OSes that support -chardev serial MAINTAINERS: Update Keith Busch's email address elf_ops: Don't try to g_mapped_file_unref(NULL) hw/mem/pc-dimm: Fix line over 80 characters warning hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug() MAINTAINERS: Mark the LatticeMico32 target as orphan timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write() display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32() scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/mem/pc-dimm: Fix line over 80 characters warningWainer dos Santos Moschetta2020-05-041-1/+2
| | | | | | | | | | | | Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20200310180510.19489-3-wainersm@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
| * hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()Wainer dos Santos Moschetta2020-05-041-2/+2
| | | | | | | | | | | | | | | | | | The error report in pc_dimm_pre_plug() now has the slot number printed. Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20200310180510.19489-2-wainersm@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* | hw/arm/virt: Add nvdimm hot-plug infrastructureKwangwoo Lee2020-05-041-1/+1
|/ | | | | | | | | | | | | | | This adds support to init nvdimm acpi state and build nvdimm acpi tables. Please note nvdimm_support is not yet enabled. Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200421125934.14952-4-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* spapr: Add NVDIMM device supportShivaprasad G Bhat2020-02-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for NVDIMM devices for sPAPR. Piggyback on existing nvdimm device interface in QEMU to support virtual NVDIMM devices for Power. Create the required DT entries for the device (some entries have dummy values right now). The patch creates the required DT node and sends a hotplug interrupt to the guest. Guest is expected to undertake the normal DR resource add path in response and start issuing PAPR SCM hcalls. The device support is verified based on the machine version unlike x86. This is how it can be used .. Ex : For coldplug, the device to be added in qemu command line as shown below -object memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896 -device nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0 For hotplug, the device to be added from monitor as below object_add memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896 device_add nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0 Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> [Early implementation] Message-Id: <158131058078.2897.12767731856697459923.stgit@lep8c.aus.stglabs.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* nvdimm: add uuid property to nvdimmShivaprasad G Bhat2020-02-201-0/+40
| | | | | | | | | | | For ppc64, PAPR requires the nvdimm device to have UUID property set in the device tree. Add an option to get it from the user. Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <158131056931.2897.14057087440721445976.stgit@lep8c.aus.stglabs.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* qdev: set properties with device_class_set_props()Marc-André Lureau2020-01-242-2/+2
| | | | | | | | | | | | | | | | | | | | | The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* memory-device: Fix memory pre-plug error API violationsMarkus Armbruster2019-12-181-2/+4
| | | | | | | | | | | | | | | | memory_device_get_free_addr() dereferences @errp when memory_device_check_addable() fails. That's wrong; see the big comment in error.h. Introduced in commit 1b6d6af21b "pc-dimm: factor out capacity and slot checks into MemoryDevice". No caller actually passes null. Fix anyway: splice in a local Error *err, and error_propagate(). Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20191204093625.14836-11-armbru@redhat.com>
* memory-device: simplify Makefile.objs conditionsPaolo Bonzini2019-10-221-1/+1
| | | | | | | hw/mem/ is only included if CONFIG_MEM_DEVICE is true, so we need not specify the condition again in hw/mem/Makefile.objs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* memory-device: break the loop if tmp exceed the hinted rangeWei Yang2019-10-151-0/+2
| | | | | | | | | | | | | | | The memory-device list built by memory_device_build_list is ordered by its address, this means if the tmp range exceed the hinted range, all the following range will not overlap with it. And this won't change default pc-dimm mapping and address assignment stay the same as before this change. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190730003740.20694-3-richardw.yang@linux.intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* memory-device: not necessary to use goto for the last checkWei Yang2019-10-151-1/+0Star
| | | | | | | | | | We are already at the last condition check. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20190730003740.20694-2-richardw.yang@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* numa: move numa global variable nb_numa_nodes into MachineStateTao Xu2019-09-031-0/+2
| | | | | | | | | | | | | | Add struct NumaState in MachineState and move existing numa global nb_numa_nodes(renamed as "num_nodes") into NumaState. And add variable numa_support into MachineClass to decide which submachines support NUMA. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20190809065731.9097-3-tao3.xu@intel.com> [ehabkost: include hw/boards.h again to fix build failures] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* numa: Move remaining NUMA declarations from sysemu.h to numa.hMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | Commit e35704ba9c "numa: Move NUMA declarations from sysemu.h to numa.h" left a few NUMA-related macros behind. Move them now. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-26-armbru@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-12 04:34:35 +0100