summaryrefslogtreecommitdiffstats
path: root/hw/misc
Commit message (Collapse)AuthorAgeFilesLines
* hw/misc/bcm2835_cprman: add sane reset values to the registersLuc Michel2020-10-271-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | Those reset values have been extracted from a Raspberry Pi 3 model B v1.2, using the 2020-08-20 version of raspios. The dump was done using the debugfs interface of the CPRMAN driver in Linux (under '/sys/kernel/debug/clk'). Each exposed clock tree stage (PLLs, channels and muxes) can be observed by reading the 'regdump' file (e.g. 'plla/regdump'). Those values are set by the Raspberry Pi firmware at boot time (Linux expects them to be set when it boots up). Some stages are not exposed by the Linux driver (e.g. the PLL B). For those, the reset values are unknown and left to 0 which implies a disabled output. Once booted in QEMU, the final clock tree is very similar to the one visible on real hardware. The differences come from some unimplemented devices for which the driver simply disable the corresponding clock. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexerLuc Michel2020-10-271-1/+73
| | | | | | | | | | | | | This simple mux sits between the PLL channels and the DSI0E and DSI0P clock muxes. This mux selects between PLLA-DSI0 and PLLD-DSI0 channel and outputs the selected signal to source number 4 of DSI0E/P clock muxes. It is controlled by the cm_dsi0hsck register. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc/bcm2835_cprman: implement clock mux behaviourLuc Michel2020-10-271-1/+52
| | | | | | | | | | | | | A clock mux can be configured to select one of its 10 sources through the CM_CTL register. It also embeds yet another clock divider, composed of an integer part and a fractional part. The number of bits of each part is mux dependent. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc/bcm2835_cprman: add a clock mux skeleton implementationLuc Michel2020-10-271-0/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clock multiplexers are the last clock stage in the CPRMAN. Each mux outputs one clock signal that goes out of the CPRMAN to the SoC peripherals. Each mux has at most 10 sources. The sources 0 to 3 are common to all muxes. They are: 0. ground (no clock signal) 1. the main oscillator (xosc) 2. "test debug 0" clock 3. "test debug 1" clock Test debug 0 and 1 are actual clock muxes that can be used as sources to other muxes (for debug purpose). Sources 4 to 9 are mux specific and can be unpopulated (grounded). Those sources are fed by the PLL channels outputs. One corner case exists for DSI0E and DSI0P muxes. They have their source number 4 connected to an intermediate multiplexer that can select between PLLA-DSI0 and PLLD-DSI0 channel. This multiplexer is called DSI0HSCK and is not a clock mux as such. It is really a simple mux from the hardware point of view (see https://elinux.org/The_Undocumented_Pi). This mux is not implemented in this commit. Note that there is some muxes for which sources are unknown (because of a lack of documentation). For those cases all the sources are connected to ground in this implementation. Each clock mux output is exported by the CPRMAN at the qdev level, adding the suffix '-out' to the mux name to form the output clock name. (E.g. the 'uart' mux sees its output exported as 'uart-out' at the CPRMAN level.) Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc/bcm2835_cprman: implement PLL channels behaviourLuc Michel2020-10-271-1/+32
| | | | | | | | | | | | A PLL channel is able to further divide the generated PLL frequency. The divider is given in the CTRL_A2W register. Some channels have an additional fixed divider which is always applied to the signal. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc/bcm2835_cprman: add a PLL channel skeleton implementationLuc Michel2020-10-271-8/+147
| | | | | | | | | | | | | | | | | PLLs are composed of multiple channels. Each channel outputs one clock signal. They are modeled as one device taking the PLL generated clock as input, and outputting a new clock. A channel shares the CM register with its parent PLL, and has its own A2W_CTRL register. A write to the CM register will trigger an update of the PLL and all its channels, while a write to an A2W_CTRL channel register will update the required channel only. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc/bcm2835_cprman: implement PLLs behaviourLuc Michel2020-10-271-1/+63
| | | | | | | | | | | | | | | | | | The CPRMAN PLLs generate a clock based on a prescaler, a multiplier and a divider. The prescaler doubles the parent (xosc) frequency, then the multiplier/divider are applied. The multiplier has an integer and a fractional part. This commit also implements the CPRMAN CM_LOCK register. This register reports which PLL is currently locked. We consider a PLL has being locked as soon as it is enabled (on real hardware, there is a delay after turning a PLL on, for it to stabilize). Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc/bcm2835_cprman: add a PLL skeleton implementationLuc Michel2020-10-271-0/+108
| | | | | | | | | | | | | | | | | | | | | There are 5 PLLs in the CPRMAN, namely PLL A, C, D, H and B. All of them take the xosc clock as input and produce a new clock. This commit adds a skeleton implementation for the PLLs as sub-devices of the CPRMAN. The PLLs are instantiated and connected internally to the main oscillator. Each PLL has 6 registers : CM, A2W_CTRL, A2W_ANA[0,1,2,3], A2W_FRAC. A write to any of them triggers a call to the (not yet implemented) pll_update function. If the main oscillator changes frequency, an update is also triggered. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/raspi: add a skeleton implementation of the CPRMANLuc Michel2020-10-273-0/+169
| | | | | | | | | | | | | | | | The BCM2835 CPRMAN is the clock manager of the SoC. It is composed of a main oscillator, and several sub-components (PLLs, multiplexers, ...) to generate the BCM2835 clock tree. This commit adds a skeleton of the CPRMAN, with a dummy register read/write implementation. It embeds the main oscillator (xosc) from which all the clocks will be derived. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc: Add npcm7xx random number generatorHavard Skinnemoen2020-10-273-0/+185
| | | | | | | | | | | | | | | | The RNG module returns a byte of randomness when the Data Valid bit is set. This implementation ignores the prescaler setting, and loads a new value into RNGD every time RNGCS is read while the RNG is enabled and random data is available. A qtest featuring some simple randomness tests is included. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/timer: Adding watchdog for NPCM7XX Timer.Hao Wu2020-10-271-0/+28
| | | | | | | | | | | | | | | The watchdog is part of NPCM7XX's timer module. Its behavior is controlled by the WTCR register in the timer. When enabled, the watchdog issues an interrupt signal after a pre-set amount of cycles, and issues a reset signal shortly after that. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: deleted blank line at end of npcm_watchdog_timer-test.c] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc/sifive_u_otp: Add backend drive supportGreen Wan2020-10-221-0/+65
| | | | | | | | | | | | | | | | | | | Add '-drive' support to OTP device. Allow users to assign a raw file as OTP image. test commands for 16k otp.img filled with zero: $ dd if=/dev/zero of=./otp.img bs=1k count=16 $ ./qemu-system-riscv64 -M sifive_u -m 256M -nographic -bios none \ -kernel ../opensbi/build/platform/sifive/fu540/firmware/fw_payload.elf \ -d guest_errors -drive if=none,format=raw,file=otp.img Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201020033732.12921-3-green.wan@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* hw/misc/sifive_u_otp: Add write function and write-once protectionGreen Wan2020-10-221-1/+29
| | | | | | | | | | | | | - Add write operation to update fuse data bit when PWE bit is on. - Add array, fuse_wo, to store the 'written' status for all bits of OTP to block the write operation. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 20201020033732.12921-2-green.wan@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* macio: don't reference serial_hd() directly within the deviceMark Cave-Ayland2020-10-181-4/+0Star
| | | | | | | | | | | | Instead use qdev_prop_set_chr() to configure the ESCC serial chardevs at the Mac Old World and New World machine level. Also remove the now obsolete comment referring to the use of serial_hd() and the setting of user_creatable to false accordingly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20201013114922.2946-2-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
* hw/misc/mips_cpc: Start vCPU when powered onPhilippe Mathieu-Daudé2020-10-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | In commit 102ca9667d we set "start-powered-off" on all vCPUs included in the CPS (Coherent Processing System) but forgot to start the vCPUS on when they are powered on in the CPC (Cluster Power Controller). This fixes the following tests: $ avocado run tests/acceptance/machine_mips_malta.py (1/3) test_mips_malta_i6400_framebuffer_logo_1core: PASS (3.67 s) (2/3) test_mips_malta_i6400_framebuffer_logo_7cores: INTERRUPTED: Test interrupted by SIGTERM (30.22 s) (3/3) test_mips_malta_i6400_framebuffer_logo_8cores: INTERRUPTED: Test interrupted by SIGTERM (30.25 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 2 | CANCEL 0 Fixes: 102ca9667d ("mips/cps: Use start-powered-off CPUState property") Reported-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20201007113942.2523866-1-f4bug@amsat.org> Message-Id: <20201007160038.26953-3-alex.bennee@linaro.org>
* Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell2020-09-241-8/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | staging Pull request This includes the atomic_ -> qatomic_ rename that touches many files and is prone to conflicts. # gpg: Signature made Wed 23 Sep 2020 17:08:43 BST # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: qemu/atomic.h: rename atomic_ to qatomic_ tests: add test-fdmon-epoll fdmon-poll: reset npfd when upgrading to fdmon-epoll gitmodules: add qemu.org vbootrom submodule gitmodules: switch to qemu.org meson mirror gitmodules: switch to qemu.org qboot mirror docs/system: clarify deprecation schedule virtio-crypto: don't modify elem->in/out_sg virtio-blk: undo destructive iov_discard_*() operations util/iov: add iov_discard_undo() virtio: add vhost-user-fs-ccw device libvhost-user: handle endianness as mandated by the spec MAINTAINERS: add Stefan Hajnoczi as block/nvme.c maintainer Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * qemu/atomic.h: rename atomic_ to qatomic_Stefan Hajnoczi2020-09-231-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clang's C11 atomic_fetch_*() functions only take a C11 atomic type pointer argument. QEMU uses direct types (int, etc) and this causes a compiler error when a QEMU code calls these functions in a source file that also included <stdatomic.h> via a system header file: $ CC=clang CXX=clang++ ./configure ... && make ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid) Avoid using atomic_*() names in QEMU's atomic.h since that namespace is used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h and <stdatomic.h> can co-exist. I checked /usr/include on my machine and searched GitHub for existing "qatomic_" users but there seem to be none. This patch was generated using: $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \ sort -u >/tmp/changed_identifiers $ for identifier in $(</tmp/changed_identifiers); do sed -i "s%\<$identifier\>%q$identifier%g" \ $(git grep -I -l "\<$identifier\>") done I manually fixed line-wrap issues and misaligned rST tables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
* | qom: simplify object_find_property / object_class_find_propertyDaniel P. Berrangé2020-09-221-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | When debugging QEMU it is often useful to put a breakpoint on the error_setg_internal method impl. Unfortunately the object_property_add / object_class_property_add methods call object_property_find / object_class_property_find methods to check if a property exists already before adding the new property. As a result there are a huge number of calls to error_setg_internal on startup of most QEMU commands, making it very painful to set a breakpoint on this method. Most callers of object_find_property and object_class_find_property, however, pass in a NULL for the Error parameter. This simplifies the methods to remove the Error parameter entirely, and then adds some new wrapper methods that are able to raise an Error when needed. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200914135617.1493072-1-berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost2020-09-1820-60/+20Star
| | | | | | | | | | | | | This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Use OBJECT_DECLARE_TYPE when possibleEduardo Habkost2020-09-181-4/+1Star
| | | | | | | | | | | | | | This converts existing DECLARE_OBJ_CHECKERS usage to OBJECT_DECLARE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-5-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* misc: aspeed_scu: Update AST2600 silicon id registerJoel Stanley2020-09-181-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | Aspeed have released an updated datasheet (v7) containing the silicon id for the AST2600 A2. It looks like this: SCU004 SCU014 AST2600-A0 0x05000303 0x05000303 AST2600-A1 0x05010303 0x05010303 AST2600-A2 0x05010303 0x05020303 AST2620-A1 0x05010203 0x05010203 AST2620-A2 0x05010203 0x05020203 The SCU004 (silicon id 1) value matches SCU014 for A0, but for subsequent revisions it is hard coded to the A1 value. Qemu effectively dropped support for the A0 in 7582591ae745 ("aspeed: Support AST2600A1 silicon revision") as the A0 reset table was removed, so it makes sense to only support the behaviour of A1 and onwards. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200916082012.776628-1-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* hw/misc: Add NPCM7xx Clock Controller device modelHavard Skinnemoen2020-09-143-0/+271
| | | | | | | | | | | | | | | | | | | | | | Enough functionality to boot the Linux kernel has been implemented. This includes: - Correct power-on reset values so the various clock rates can be accurately calculated. - Clock enables stick around when written. In addition, a best effort attempt to implement SECCNT and CNTR25M was made even though I don't think the kernel needs them. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-3-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc: Add NPCM7xx System Global Control Registers device modelHavard Skinnemoen2020-09-143-0/+276
| | | | | | | | | | | | | | | | | | | | | Implement a device model for the System Global Control Registers in the NPCM730 and NPCM750 BMC SoCs. This is primarily used to enable SMP boot (the boot ROM spins reading the SCRPAD register) and DDR memory initialization; other registers are best effort for now. The reset values of the MDLR and PWRON registers are determined by the SoC variant (730 vs 750) and board straps respectively. Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-2-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc/a9scu: Report unimplemented accesses with qemu_log_mask(UNIMP)Philippe Mathieu-Daudé2020-09-141-0/+6
| | | | | | | | | Report unimplemented register accesses using qemu_log_mask(UNIMP). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200901144100.116742-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc/a9scu: Simplify setting MemoryRegionOps::impl fieldsPhilippe Mathieu-Daudé2020-09-141-11/+5Star
| | | | | | | | | | | | This model implementation is designed for 32-bit accesses. We can simplify setting the MemoryRegionOps::impl min/max fields to 32-bit (memory::access_with_adjusted_size() will take care of the 8/16-bit accesses). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200901144100.116742-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc/a9scu: Simplify setting MemoryRegionOps::valid fieldsPhilippe Mathieu-Daudé2020-09-141-16/+5Star
| | | | | | | | | | | | | | Per the datasheet (DDI0407 r2p0): "All SCU registers are byte accessible" and are 32-bit aligned. Set MemoryRegionOps::valid min/max fields and simplify the write() handler. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200901144100.116742-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc/a9scu: Do not allow invalid CPU countPhilippe Mathieu-Daudé2020-09-141-5/+13
| | | | | | | | | | | | | | | | Per the datasheet (DDI0407 r2p0): "The SCU connects one to four Cortex-A9 processors to the memory system through the AXI interfaces." Change the instance_init() handler to a device_realize() one so we can verify the property is in range, and return an error to the caller if not. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200901144100.116742-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Merge remote-tracking branch ↵Peter Maydell2020-09-136-0/+603
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging This PR includes multiple fixes and features for RISC-V: - Fixes a bug in printing trap causes - Allows 16-bit writes to the SiFive test device. This fixes the failure to reboot the RISC-V virt machine - Support for the Microchip PolarFire SoC and Icicle Kit - A reafactor of RISC-V code out of hw/riscv # gpg: Signature made Thu 10 Sep 2020 19:08:06 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits) hw/riscv: Sort the Kconfig options in alphabetical order hw/riscv: Drop CONFIG_SIFIVE hw/riscv: Always build riscv_hart.c hw/riscv: Move sifive_test model to hw/misc hw/riscv: Move sifive_uart model to hw/char hw/riscv: Move riscv_htif model to hw/char hw/riscv: Move sifive_plic model to hw/intc hw/riscv: Move sifive_clint model to hw/intc hw/riscv: Move sifive_gpio model to hw/gpio hw/riscv: Move sifive_u_otp model to hw/misc hw/riscv: Move sifive_u_prci model to hw/misc hw/riscv: Move sifive_e_prci model to hw/misc hw/riscv: sifive_u: Connect a DMA controller hw/riscv: clint: Avoid using hard-coded timebase frequency hw/riscv: microchip_pfsoc: Hook GPIO controllers hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 hw/net: cadence_gem: Add a new 'phy-addr' property hw/riscv: microchip_pfsoc: Connect a DMA controller hw/dma: Add SiFive platform DMA controller emulation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/riscv/trace-events
| * hw/riscv: Move sifive_test model to hw/miscBin Meng2020-09-103-0/+104
| | | | | | | | | | | | | | | | | | | | | | This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_test model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
| * hw/riscv: Move sifive_u_otp model to hw/miscBin Meng2020-09-103-0/+195
| | | | | | | | | | | | | | | | | | | | | | This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_otp model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
| * hw/riscv: Move sifive_u_prci model to hw/miscBin Meng2020-09-103-0/+173
| | | | | | | | | | | | | | | | | | | | | | This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
| * hw/riscv: Move sifive_e_prci model to hw/miscBin Meng2020-09-103-0/+131
| | | | | | | | | | | | | | | | | | | | | | This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_e_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* | Merge remote-tracking branch ↵Peter Maydell2020-09-1125-103/+158
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/ehabkost/tags/machine-next-pull-request' into staging QOM boilerplate cleanup Documentation build fix: * memory: Remove kernel-doc comment marker (Eduardo Habkost) QOM cleanups: * Rename QOM macros for consistency between TYPE_* and type checking constants (Eduardo Habkost) QOM new macros: * OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé) * DECLARE_*_CHECKER macros (Eduardo Habkost) Automated QOM boilerplate changes: * Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost * Automated changes to use OBJECT_DECLARE* (Eduardo Habkost) # gpg: Signature made Thu 10 Sep 2020 19:17:49 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: (33 commits) virtio-vga: Use typedef name for instance_size vhost-user-vga: Use typedef name for instance_size xilinx_axienet: Use typedef name for instance_size lpc_ich9: Use typedef name for instance_size omap_intc: Use typedef name for instance_size xilinx_axidma: Use typedef name for instance_size tusb6010: Rename TUSB to TUSB6010 pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312 vfio: Rename PCI_VFIO to VFIO_PCI usb: Rename USB_SERIAL_DEV to USB_SERIAL sabre: Rename SABRE_DEVICE to SABRE rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER esp: Rename ESP_STATE to ESP ahci: Rename ICH_AHCI to ICH9_AHCI vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE gpex: Fix type checking function name ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | Use DECLARE_*CHECKER* macrosEduardo Habkost2020-09-0925-52/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
| * | Move QOM typedefs and add missing includesEduardo Habkost2020-09-0925-51/+100
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* | trace-events: Fix attribution of trace points to sourceMarkus Armbruster2020-09-091-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some trace points are attributed to the wrong source file. Happens when we neglect to update trace-events for code motion, or add events in the wrong place, or misspell the file name. Clean up with help of scripts/cleanup-trace-events.pl. Funnies requiring manual post-processing: * accel/tcg/cputlb.c trace points are in trace-events. * block.c and blockdev.c trace points are in block/trace-events. * hw/block/nvme.c uses the preprocessor to hide its trace point use from cleanup-trace-events.pl. * hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to guard debug code. * include/hw/xen/xen_common.h trace points are in hw/xen/trace-events. * linux-user/trace-events abbreviates a tedious list of filenames to */signal.c. * net/colo-compare and net/filter-rewriter.c use pseudo trace points colo_compare_miscompare and colo_filter_rewriter_debug to guard debug code. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200806141334.3646302-5-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* | trace-events: Delete unused trace pointsMarkus Armbruster2020-09-091-1/+0Star
|/ | | | | | | | Tracked down with the help of scripts/cleanup-trace-events.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 20200806141334.3646302-4-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20200901' ↵Peter Maydell2020-09-032-60/+74
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into staging Various fixes of Aspeed machines : * New Supermicro X11 BMC machine (Erik) * Fixed valid access size on AST2400 SCU * Improved robustness of the ftgmac100 model. * New flash models in m25p80 (Igor) * Fixed reset sequence of SDHCI/eMMC controllers * Improved support of the AST2600 SDMC (Joel) * Couple of SMC cleanups # gpg: Signature made Tue 01 Sep 2020 13:39:20 BST # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20200901: hw: add a number of SPI-flash's of m25p80 family arm: aspeed: add strap define `25HZ` of AST2500 aspeed/smc: Open AHB window of the second chip of the AST2600 FMC controller aspeed/sdmc: Simplify calculation of RAM bits aspeed/sdmc: Allow writes to unprotected registers aspeed/sdmc: Perform memory training ftgmac100: Improve software reset ftgmac100: Fix integer overflow in ftgmac100_do_tx() ftgmac100: Check for invalid len and address before doing a DMA transfer ftgmac100: Change interrupt status when a DMA error occurs ftgmac100: Fix interrupt status "Packet moved to RX FIFO" ftgmac100: Fix interrupt status "Packet transmitted on ethernet" ftgmac100: Fix registers that can be read aspeed/sdhci: Fix reset sequence aspeed/smc: Fix max_slaves of the legacy SMC device aspeed/smc: Fix MemoryRegionOps definition hw/arm/aspeed: Add board model for Supermicro X11 BMC aspeed/scu: Fix valid access size on AST2400 m25p80: Add support for n25q512ax3 m25p80: Return the JEDEC ID twice for mx25l25635e Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * aspeed/sdmc: Simplify calculation of RAM bitsCédric Le Goater2020-09-011-54/+25Star
| | | | | | | | | | | | | | | | | | | | | | Changes in commit 533eb415df2e ("arm/aspeed: actually check RAM size") introduced a 'valid_ram_sizes' array which can be used to compute the associated bit field value encoding the RAM size. The field is simply the index of the array. Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20200819100956.2216690-19-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
| * aspeed/sdmc: Allow writes to unprotected registersJoel Stanley2020-09-011-0/+27
| | | | | | | | | | | | | | | | | | A subset of registers are not protected by the lock behaviour, so allow unconditionally writing to those. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-Id: <20200819100956.2216690-18-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
| * aspeed/sdmc: Perform memory trainingJoel Stanley2020-09-012-3/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows qemu to run the "normal" power on reset boot path through u-boot, where the DDR is trained. An enhancement would be to have the SCU bit stick across qemu reboots, but be unset on initial boot. Proper modelling would be to discard all writes to the phy setting regs at offset 0x100 - 0x400 and to model the phy status regs at offset 0x400. The status regs model would only need to account for offets 0x00, 0x50, 0x68 and 0x7c. Signed-off-by: Joel Stanley <joel@jms.id.au> [ clg: checkpatch fixes ] Message-Id: <20200819100956.2216690-17-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
| * aspeed/scu: Fix valid access size on AST2400Cédric Le Goater2020-09-011-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The read access size of the SCU registers can be 1/2/4 bytes and write is 4 bytes and all Aspeed models would need a .valid.accepts() handler. For the moment, set the min access size to 1 byte to cover both read and write operations on the AST2400 but keep the min access size of the other SoCs to 4 bytes as this is an unusual access size. This fixes support for some old firmware doing 2 bytes reads on the AST2400 SoC. Reported-by: Erik Smit <erik.lucas.smit@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20200819100956.2216690-5-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* | mos6522: Rename QOM macrosEduardo Habkost2020-09-024-17/+17
| | | | | | | | | | | | | | | | | | | | | | | | Rename the MOS6522_DEVICE_CLASS and MOS6522_DEVICE_GET_CLASS macros to be consistent with the TYPE_MOS6522 and MOS6522 macros. This will make future conversion to OBJECT_DECLARE* easier. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200825192110.3528606-46-ehabkost@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* | imx_ccm: Rename IMX_GET_CLASS macroEduardo Habkost2020-09-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Rename it to IMX_CCM_GET_CLASS to be consistent with the existing IMX_CCM and IXM_CCM_CLASS macro. This will make future conversion to OBJECT_DECLARE* easier. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200825192110.3528606-45-ehabkost@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* | hw/misc/sbsa_ec : Add an embedded controller for sbsa-refGraeme Gregory2020-09-012-0/+100
|/ | | | | | | | | | | | | | | | | A difference between sbsa platform and the virt platform is PSCI is handled by ARM-TF in the sbsa platform. This means that the PSCI code there needs to communicate some of the platform power changes down to the qemu code for things like shutdown/reset control. Space has been left to extend the EC if we find other use cases in future where ARM-TF and qemu need to communicate. Signed-off-by: Graeme Gregory <graeme@nuviainc.com> Reviewed-by: Leif Lindholm <leif@nuviainc.com> Tested-by: Leif Lindholm <leif@nuviainc.com> Message-id: 20200826141952.136164-2-graeme@nuviainc.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Merge remote-tracking branch ↵Peter Maydell2020-08-281-6/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/pmaydell/tags/pull-target-arm-20200828' into staging target-arm queue: * target/arm: Cleanup and refactoring preparatory to SVE2 * armsse: Define ARMSSEClass correctly * hw/misc/unimp: Improve information provided in log messages * hw/qdev-clock: Avoid calling qdev_connect_clock_in after DeviceRealize * hw/arm/xilinx_zynq: Call qdev_connect_clock_in() before DeviceRealize * hw/net/allwinner-sun8i-emac: Use AddressSpace for DMA transfers * hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers * target/arm: Fill in the WnR syndrome bit in mte_check_fail * target/arm: Clarify HCR_EL2 ARMCPRegInfo type * hw/arm/musicpal: Use AddressSpace for DMA transfers * hw/clock: Minor cleanups * hw/arm/sbsa-ref: fix typo breaking PCIe IRQs # gpg: Signature made Fri 28 Aug 2020 10:23:02 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20200828: (35 commits) target/arm: Convert sq{, r}dmulh to gvec for aa64 advsimd target/arm: Convert integer multiply-add (indexed) to gvec for aa64 advsimd target/arm: Convert integer multiply (indexed) to gvec for aa64 advsimd target/arm: Generalize inl_qrdmlah_* helper functions target/arm: Tidy SVE tszimm shift formats target/arm: Split out gen_gvec_ool_zz target/arm: Split out gen_gvec_ool_zzz target/arm: Split out gen_gvec_ool_zzp target/arm: Merge helper_sve_clr_* and helper_sve_movz_* target/arm: Split out gen_gvec_ool_zzzp target/arm: Use tcg_gen_gvec_bitsel for trans_SEL_pppp target/arm: Clean up 4-operand predicate expansion target/arm: Merge do_vector2_p into do_mov_p target/arm: Rearrange {sve,fp}_check_access assert target/arm: Split out gen_gvec_fn_zzz, do_zzz_fn target/arm: Split out gen_gvec_fn_zz qemu/int128: Add int128_lshift armsse: Define ARMSSEClass correctly hw/misc/unimp: Display the offset with width of the region size hw/misc/unimp: Display the value with width of the access size ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/misc/unimp: Display the offset with width of the region sizePhilippe Mathieu-Daudé2020-08-281-4/+6
| | | | | | | | | | | | | | | | | | | | | | To have a better idea of how big is the region where the offset belongs, display the value with the width of the region size (i.e. a region of 0x1000 bytes uses 0x000 format). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200812190206.31595-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/misc/unimp: Display the value with width of the access sizePhilippe Mathieu-Daudé2020-08-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | To quickly notice the access size, display the value with the width of the access (i.e. 16-bit access is displayed 0x0000, while 8-bit access 0x00). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200812190206.31595-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/misc/unimp: Display value after offsetPhilippe Mathieu-Daudé2020-08-281-4/+4
| | | | | | | | | | | | | | | | | | | | To better align the read/write accesses, display the value after the offset (read accesses only display the offset). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200812190206.31595-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | auxbus: Move QOM macros to headerEduardo Habkost2020-08-271-2/+0Star
|/ | | | | | | | | | This will make future conversion to OBJECT_DECLARE* easier. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-38-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2025-01-15 17:14:42 +0100