summaryrefslogtreecommitdiffstats
path: root/hw/pci.h
Commit message (Collapse)AuthorAgeFilesLines
* qdev: update pci device registration.Gerd Hoffmann2009-07-091-1/+9
| | | | | | | | | Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunch of parameters. Also adds config_read and config_write callbacks to PCIDeviceInfo, so drivers needing these can be converted to the qdev device API too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* monitor: Drop pci_addr prefix from hotplug commandsJan Kiszka2009-06-291-1/+2
| | | | | | | | | The "pci_addr=" prefix currently required by pci_add/remove and drive_add has no practical use. Drop it, but still silently accept it for backward compatibility. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu/pci: add pci_get/set_byteMichael S. Tsirkin2009-06-241-0/+12
| | | | | | | | Add pci_get/set_byte to keep *_word and *_long access functions company. They are unused for now. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu/pci: MSI-X support functionsMichael S. Tsirkin2009-06-241-0/+23
| | | | | | | | | | | Add functions implementing MSI-X support. First user will be virtio-pci. Note that platform must set a flag to declare MSI supported: this is a safety measure to avoid breaking platforms which should support MSI-X but currently lack this in the interrupt controller emulation. For PC this will be set by APIC. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu/pci: check constant registers on loadMichael S. Tsirkin2009-06-241-0/+5
| | | | | | | | | | | | | | Add "cmask" table of constant register masks: if a bit is not writeable and is set in cmask table, this bit is checked on load. An attempt to load an image that would change such a register causes load to fail. Use this table to make sure that load does not modify registers that guest can not change (directly or indirectly). Note: we can't just assume that read-only registers never change, because the guest could change a register indirectly. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu/pci: add routines to manage PCI capabilitiesMichael S. Tsirkin2009-06-241-1/+17
| | | | | | | Add routines to manage PCI capability list. First user will be MSI-X. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu/pci: helper routines for pci accessMichael S. Tsirkin2009-06-241-3/+27
| | | | | | | | Add inline routines for convenient access to pci devices with correct (little) endianness. Will be used by MSI-X support. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu/pci: make default_write_config use mask tableMichael S. Tsirkin2009-06-241-1/+17
| | | | | | | | | | | | | | | | Change much of hw/pci to use symbolic constants and a table-driven design: add a mask table with writable bits set and readonly bits unset. Detect change by comparing original and new registers. This makes it easy to support capabilities where read-only/writeable bit layout differs between devices, depending on capabilities present. As a result, writing a single byte in BAR registers now works as it should. Writing to upper limit registers in the bridge also works as it should. Code is also shorter. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Make first argument of monitor command pci_add workMarkus Armbruster2009-06-221-1/+1
| | | | | | | | | | | Simply pass the PCI address through qemu_pci_hot_add_nic() to pci_nic_init() and through qemu_pci_hot_add_storage() to pci_create(). Before, pci_device_hot_add() passed along the PCI bus to use, and ignored any user-specified slot. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Support addr=... in option argument of -net nicMarkus Armbruster2009-06-221-2/+2
| | | | | | | | | | | | | | | | | Make net_client_init() accept addr=, put the value into struct NICinfo. Use it in pci_nic_init(), and remove arguments bus and devfn. Don't support addr= in third argument of monitor command pci_add, because that clashes with its first argument. Admittedly unelegant. Machines "malta" and "r2d" have a default NIC with a well-known PCI address. Deal with that the same way as the NIC model: make pci_nic_init() take an optional default to be used when the user doesn't specify one. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Rename pci_register_io_region() to pci_register_bar()Avi Kivity2009-06-161-1/+1
| | | | | | | | This function is used to manage a PCI BAR, so make the more generic pci_register_io_region() available to other uses. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Remove unused and misnamed field and variableBlue Swirl2009-06-091-4/+0Star
| | | | Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* Add common BusStatePaul Brook2009-05-231-1/+2
| | | | | | | | | | | Implement and use a common device bus state. The main side-effect is that creating a bus and attaching it to a parent device are no longer separate operations. For legacy code we allow a NULL parent, but that should go away eventually. Also tweak creation code to veriry theat a device in on the right bus. Signed-off-by: Paul Brook <paul@codesourcery.com>
* PCI network qdev conversionPaul Brook2009-05-141-20/+0Star
| | | | Signed-off-by: Paul Brook <paul@codesourcery.com>
* LSI SCSI qdev conversionPaul Brook2009-05-141-2/+1Star
| | | | Signed-off-by: Paul Brook <paul@codesourcery.com>
* PCI qdev supportPaul Brook2009-05-141-0/+8
| | | | Signed-off-by: Paul Brook <paul@codesourcery.com>
* Remove vga_ram_sizePaul Brook2009-05-131-1/+1
| | | | | | | | | | The vga_ram_size argument to machine init functions always has the same value, and is ignored by many machines (including SPARC32 which has an obsolete ifdef for VGA_RAM_SIZE). Remove it and push VGA_RAM_SIZE into vga_int.h. Signed-off-by: Paul Brook <paul@codesourcery.com>
* use PCI_HEADER_TYPE.Isaku Yamahata2009-05-031-0/+4
| | | | | | use symbolic value instead of 0x0e and related value. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
* Clean up VGA ram allocation.pbrook2009-04-101-2/+1Star
| | | | | | | Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7063 c046a42c-6fe2-441c-8c8c-71466251a162
* Clean some PCI defines (Stefan Weil)aliguori2009-03-281-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this patch adds some more defines from linux/pci_regs.h to hw/pci.h. There is now no longer a need to define them in eepro100.c, so they were removed there. Some defines from linux/pci_regs.h had similar, but not the same defines in hw/pci.h (PCI_REVISION_ID / PCI_REVISION, PCI_SUBSYSTEM_VENDOR_ID / PCI_SUBVENDOR_ID, PCI_SUBSYSTEM_ID / PCI_SUBDEVICE_ID). I suggest to use the "standard" from linux/pci_regs.h and replace the "old" Qemu ones. To facilitate the migration, my patch does not remove the old defines but marks them as obsolete. After a migration to the "standard" defines, pci.h could use linux/pci_regs.h which is far more complete. The patch is needed for an updated maintainer version of hw/eepro100.c which I'd like to see in Qemu stable. * Remove declarations already declared in header file from eepro100.c * Add missing declarations from pci_regs.h to pci.h * Mark "non-standard" declarations in pci.h as obsolete Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6901 c046a42c-6fe2-441c-8c8c-71466251a162
* Add and use remaining #defines for PCI device IDs (Stuart Brady)aliguori2009-03-131-78/+18Star
| | | | | | | | | | | | | | | | | | | This patch adds and uses #defines for the remaining hardcoded PCI device IDs. It also moves definitions taken from linux/pci_ids.h into a separate header (hw/pci_ids.h), removes the 'RTL' from PCI_DEVICE_ID_REALTEK_RTL8029, and renames PCI_DEVICE_ID_FSL_E500 to PCI_DEVICE_ID_MPC8533E to match Linux's definition. Changes in v2: * Don't use C99-style comments * Move definitions from linux/pci_ids.h into a separate header * Rename PCI_DEVICE_ID_FSL_E500 to PCI_DEVICE_ID_MPC8533E Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6841 c046a42c-6fe2-441c-8c8c-71466251a162
* monitor: Rework API (Jan Kiszka)aliguori2009-03-061-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refactor the monitor API and prepare it for decoupled terminals: term_print functions are renamed to monitor_* and all monitor services gain a new parameter (mon) that will once refer to the monitor instance the output is supposed to appear on. However, the argument remains unused for now. All monitor command callbacks are also extended by a mon parameter so that command handlers are able to pass an appropriate reference to monitor output services. For the case that monitor outputs so far happen without clearly identifiable context, the global variable cur_mon is introduced that shall once provide a pointer either to the current active monitor (while processing commands) or to the default one. On the mid or long term, those use case will be obsoleted so that this variable can be removed again. Due to the broad usage of the monitor interface, this patch mostly deals with converting users of the monitor API. A few of them are already extended to pass 'mon' from the command handler further down to internal functions that invoke monitor_printf. At this chance, monitor-related prototypes are moved from console.h to a new monitor.h. The same is done for the readline API. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
* kvm/powerpc: Add freescale pci controller's supportaurel322009-03-021-0/+4
| | | | | | | | | This patch add the emulation of freescale's pci controller for MPC85xx platform. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6661 c046a42c-6fe2-441c-8c8c-71466251a162
* qemu: PCI device, disk and host network hot-add / hot-remove (Marcelo Tosatti)aliguori2009-02-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Add monitor command to hot-add PCI devices (nic and storage). Syntax is: pci_add pci_addr=[[<domain>:]<bus>:]<slot> nic|storage params It returns the domain, bus and slot for the newly added device on success. It is possible to attach a disk to a device after PCI initialization via the drive_add command. If so, a manual scan of the SCSI bus on the guest is necessary. Save QEMUMachine necessary for drive_init. Add monitor command to hot-remove devices, remove device data on _EJ0 notification. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6610 c046a42c-6fe2-441c-8c8c-71466251a162
* Parse full PCI device addresses (Markus Armbruster)aliguori2009-02-111-0/+3
| | | | | | | | | | | This code parses full PCI device addresses. It then rejects domains other than zero, because these are not supported in QEMU. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6609 c046a42c-6fe2-441c-8c8c-71466251a162
* qemu: add pci_unregister_device (Marcelo Tosatti)aliguori2009-02-111-0/+3
| | | | | | | | | | | | | Unregister the pci device, unassign its IO and memory regions, and free associated data. Add a callback so drivers can free device state. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6603 c046a42c-6fe2-441c-8c8c-71466251a162
* qemu: return PCIDevice on net device init and record devfn (Marcelo Tosatti)aliguori2009-02-111-8/+8
| | | | | | | | | | | | | | Change the PCI network drivers init functions to return the PCIDev, to inform which slot has been hot-plugged. Also record PCIDevice structure on NICInfo to locate for release on hot-removal. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6593 c046a42c-6fe2-441c-8c8c-71466251a162
* qemu: add pci helper functions (Marcelo Tosatti)aliguori2009-02-111-0/+6
| | | | | | | | | | Add pci_find_bus/pci_find_device to be used by PCI hotplug. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6592 c046a42c-6fe2-441c-8c8c-71466251a162
* Add and use #defines for PCI device classesblueswir12009-02-011-0/+36
| | | | | | | | | | | | | This patch adds and uses #defines for PCI device classes and subclases, using a new pci_config_set_class() function, similar to the recently added pci_config_set_vendor_id() and pci_config_set_device_id(). Change since v1: fixed compilation of hw/sun4u.c Signed-off-by: Stuart Brady <stuart.brady@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6491 c046a42c-6fe2-441c-8c8c-71466251a162
* Update #defines for PCI vendor and device IDs from OpenBIOS and Linuxblueswir12009-02-011-0/+10
| | | | git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6490 c046a42c-6fe2-441c-8c8c-71466251a162
* Add Simba device IDblueswir12009-01-271-1/+2
| | | | git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6465 c046a42c-6fe2-441c-8c8c-71466251a162
* Define PCI vendor and device IDs in pci.h (Stuart Brady)aliguori2009-01-261-1/+69
| | | | | | | | | | | | | | | This patch defines PCI vendor and device IDs in pci.h (matching those from Linux's pci_ids.h), and uses those definitions where appropriate. Change from v1: Introduces pci_config_set_vendor_id() / pci_config_set_device_id() accessors as suggested by Anthony Liguori. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6442 c046a42c-6fe2-441c-8c8c-71466251a162
* Add macro for virtio-console PCI device ID (Mark McLoughlin)aliguori2009-01-261-0/+1
| | | | | | | | | | Also use the existing macro for the PCI vendor ID Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6439 c046a42c-6fe2-441c-8c8c-71466251a162
* graphical_console_init change (Stefano Stabellini)aliguori2009-01-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch 5/7 This patch changes the graphical_console_init function to return an allocated DisplayState instead of a QEMUConsole. This patch contains just the graphical_console_init change and few other modifications mainly in console.c and vl.c. It was necessary to move the display frontends (e.g. sdl and vnc) initialization after machine->init in vl.c. This patch does *not* include any required changes to any device, these changes come with the following patches. Patch 6/7 This patch changes the QEMUMachine init functions not to take a DisplayState as an argument because is not needed any more; In few places the graphic hardware initialization function was called only if DisplayState was not NULL, now they are always called. Apart from these cases, the rest are all mechanical substitutions. Patch 7/7 This patch updates the graphic device code to use the new graphical_console_init function. As for the previous patch, in few places graphical_console_init was called only if DisplayState was not NULL, now it is always called. Apart from these cases, the rest are all mechanical substitutions. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
* Make pci_nic_init() use qemu_setup_nic_model() (Mark McLoughlin)aliguori2009-01-131-1/+2
| | | | | | | | | | | | | | Add a table of PCI NIC models to pass to qemu_setup_nic_model(). While we're at it, also add a corresponding table of NIC init functions. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6287 c046a42c-6fe2-441c-8c8c-71466251a162
* Add EBUS bridgeblueswir12009-01-101-2/+3
| | | | git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6266 c046a42c-6fe2-441c-8c8c-71466251a162
* PCI: Mask writes to RO bits in the command reg of PCI config spaceaurel322008-12-181-0/+5
| | | | | | | | | | The Command register in the PCI config space has some read-only bits. Any writes to those bits should be masked out. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6092 c046a42c-6fe2-441c-8c8c-71466251a162
* PCI: Mask writes to RO bits in the status reg of PCI config spaceaurel322008-12-181-0/+15
| | | | | | | | | | The Status register in the PCI config space has some read-only bits. Any writes to those bits should be masked out. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6091 c046a42c-6fe2-441c-8c8c-71466251a162
* pci: add default pci subsystem id for all devices (Gerd Hoffman)aliguori2008-12-111-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This sets a default PCI subsystem ID for all emulated PCI devices. PCI specs require this, so do it. In many cases it is enougth to know the PCI ID to handle a device correctly. Sometimes a device driver must identify the exact piece of hardware (via PCI Subsystem ID) though. What does this patch to qemu devices: Right now the emulated PCI devices have no PCI subsystem ID, only the PCI ID. The discussed patch sets a default PCI subsystem ID for all emulated devices. Which will make the qemu devices look pretty much like in the laptop case: all PCI subsystem IDs will point to qemu by default. If a driver emulates a very specific piece of hardware where it has to emulate more than just the PCI chip, it can overwrite the PCI subsystem ID without problems. The es1370 driver does that for example. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5986 c046a42c-6fe2-441c-8c8c-71466251a162
* SH4: kill a few warningsaurel322008-12-071-0/+4
| | | | | | Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5938 c046a42c-6fe2-441c-8c8c-71466251a162
* E1000 NIC emulation (Nir Peleg, patch from Dor Laor).balrog2008-02-031-0/+3
| | | | | | | Applied %s/^\([^I ]*\)^I/\1 /g on e1000.c and added e1000 to help message. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3949 c046a42c-6fe2-441c-8c8c-71466251a162
* Add -drive parameter, by Laurent Vivier.ths2007-12-021-0/+1
| | | | git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3759 c046a42c-6fe2-441c-8c8c-71466251a162
* Break up vl.h.pbrook2007-11-171-0/+138
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-11-14 04:43:51 +0100