summaryrefslogtreecommitdiffstats
path: root/hw/ppc/spapr_irq.c
Commit message (Collapse)AuthorAgeFilesLines
* spapr/xics: Drop unused argument to xics_kvm_has_broken_disconnect()Greg Kurz2020-12-141-1/+1
| | | | | | | | | Never used from the start. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20201120174646.619395-6-groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr/xive: Use the xics flag to check for XIVE-only IRQ backendsCédric Le Goater2020-09-081-1/+1
| | | | | | | | | | | | | | | | | The sPAPR machine has four different IRQ backends, each implementing the XICS or XIVE interrupt mode or both in the case of the 'dual' backend. If a machine is started in P8 compat mode, QEMU should necessarily support the XICS interrupt mode and in that case, the XIVE-only IRQ backend is invalid. Currently, spapr_irq_check() tests the pointer value to the IRQ backend to check for this condition, instead use the 'xics' flag. It's equivalent and it will ease the introduction of new XIVE-only IRQ backends if needed. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200820140106.2357228-1-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: Clarify error and documentation for broken KVM XICSGreg Kurz2020-08-121-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | When starting an L2 KVM guest with `ic-mode=dual,kernel-irqchip=on`, QEMU fails with: KVM is too old to support ic-mode=dual,kernel-irqchip=on This error message was introduced to detect older KVM versions that didn't allow destruction and re-creation of the XICS KVM device that we do at reboot. But it is actually the same issue that we get with nested guests : when running under pseries, KVM currently provides a genuine XICS device (not the XICS-on-XIVE device that we get under powernv) which doesn't support destruction/re-creation. This will eventually be fixed in KVM but in the meantime, update the error message and documentation to mention the nested case. While here, mention that in "No XIVE support in KVM" section that this can also happen with "guest OSes supporting XIVE" since we check this at init time before starting the guest. Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Buglink: https://bugs.launchpad.net/qemu/+bug/1890290 Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <159664243614.622889.18307368735989783528.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster2020-07-101-3/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
* qom: Put name parameter before value / visitor parameterMarkus Armbruster2020-07-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
* qdev: Use returned bool to check for qdev_realize() etc. failureMarkus Armbruster2020-07-101-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert foo(..., &err); if (err) { ... } to if (!foo(..., &err)) { ... } for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their wrappers isa_realize_and_unref(), pci_realize_and_unref(), sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref(). Coccinelle script: @@ identifier fun = { isa_realize_and_unref, pci_realize_and_unref, qbus_realize, qdev_realize, qdev_realize_and_unref, sysbus_realize, sysbus_realize_and_unref, usb_realize_and_unref }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Nothing to convert there; skipped. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200707160613.848843-5-armbru@redhat.com>
* qdev: Convert bus-less devices to qdev_realize() with CoccinelleMarkus Armbruster2020-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All remaining conversions to qdev_realize() are for bus-less devices. Coccinelle script: // only correct for bus-less @dev! @@ expression errp; expression dev; @@ - qdev_init_nofail(dev); + qdev_realize(dev, NULL, &error_fatal); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(dev, true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
* sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster2020-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
* qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster2020-06-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
* qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster2020-05-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
* spapr, pnv, xive: Add a "xive-fabric" link to the XIVE routerGreg Kurz2020-01-081-0/+2
| | | | | | | | | | | | | | | In order to get rid of qdev_get_machine(), first add a pointer to the XIVE fabric under the XIVE router and make it configurable through a QOM link property. Configure it in the spapr and pnv machine. In the case of pnv, the XIVE routers are under the chip, so this is done with a QOM alias property of the POWER9 pnv chip. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200106145645.4539-5-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* kvm: introduce kvm_kernel_irqchip_* functionsPaolo Bonzini2019-12-171-12/+4Star
| | | | | | | | The KVMState struct is opaque, so provide accessors for the fields that will be moved from current_machine to the accelerator. For now they just forward to the machine object, but this will change. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* spapr: Pass the maximum number of vCPUs to the KVM interrupt controllerGreg Kurz2019-12-171-3/+5
| | | | | | | | | | | | | | | | The XIVE and XICS-on-XIVE KVM devices on POWER9 hosts can greatly reduce their consumption of some scarce HW resources, namely Virtual Presenter identifiers, if they know the maximum number of vCPUs that may run in the VM. Prepare ground for this by passing the value down to xics_kvm_connect() and kvmppc_xive_connect(). This is purely mechanical, no functional change. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157478678301.67101.2717368060417156338.stgit@bahia.tlslab.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: Abort if XICS interrupt controller cannot be initializedGreg Kurz2019-12-171-11/+2Star
| | | | | | | | | | | | | | | | | | | | Failing to set any of the ICS property should really never happen: - object_property_add_child() always succeed unless the child object already has a parent, which isn't the case here obviously since the ICS has just been created with object_new() - the ICS has an "nr-irqs" property than can be set as long as the ICS isn't realized In both cases, an error indicates there is a bug in QEMU. Propagating the error, ie. exiting QEMU since spapr_irq_init() is called with &error_fatal doesn't make much sense. Abort instead. This is consistent with what is done with XIVE : both qdev_create() and qdev_prop_set_uint32() abort QEMU on error. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157403285265.409804.8683093665795248192.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* xics: Link ICS_PROP_XICS property to ICSState::xics pointerGreg Kurz2019-12-171-7/+2Star
| | | | | | | | | | | | | | | The ICS object has both a pointer and an ICS_PROP_XICS property pointing to the XICS fabric. Confusing bugs could arise if these ever go out of sync. Change the property definition so that it explicitely sets the pointer. The property isn't optional : not being able to set the link is a bug and QEMU should rather abort than exit in this case. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157403283596.409804.17347207690271971987.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: Work around spurious warnings from vfio INTx initializationDavid Gibson2019-11-261-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Traditional PCI INTx for vfio devices can only perform well if using an in-kernel irqchip. Therefore, vfio_intx_update() issues a warning if an in kernel irqchip is not available. We usually do have an in-kernel irqchip available for pseries machines on POWER hosts. However, because the platform allows feature negotiation of what interrupt controller model to use, we don't currently initialize it until machine reset. vfio_intx_update() is called (first) from vfio_realize() before that, so it can issue a spurious warning, even if we will have an in kernel irqchip by the time we need it. To workaround this, make a call to spapr_irq_update_active_intc() from spapr_irq_init() which is called at machine realize time, before the vfio realize. This call will be pretty much obsoleted by the later call at reset time, but it serves to suppress the spurious warning from VFIO. Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: Alex Williamson <alex.williamson@redhat.com>
* spapr: Handle irq backend changes with VFIO PCI devicesDavid Gibson2019-11-261-0/+6
| | | | | | | | | | | | | | | | | | | | | | pseries machine type can have one of two different interrupt controllers in use depending on feature negotiation with the guest. Usually this is invisible to devices, because they route to a common set of qemu_irqs which in turn dispatch to the correct back end. VFIO passthrough devices, however, wire themselves up directly to the KVM irqchip for performance, which means they are affected by this change in interrupt controller. To get them to adjust correctly for the change in irqchip, we need to fire the kvm irqchip change notifier. Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: Alex Williamson <alex.williamson@redhat.com>
* ppc: Add intc_destroy() handlers to SpaprInterruptController/PnvChipGreg Kurz2019-11-181-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | SpaprInterruptControllerClass and PnvChipClass have an intc_create() method that calls the appropriate routine, ie. icp_create() or xive_tctx_create(), to establish the link between the VCPU and the presenter component of the interrupt controller during realize. There aren't any symmetrical call to be called when the VCPU gets unrealized though. It is assumed that object_unparent() is the only thing to do. This is questionable because the parenting logic around the CPU and presenter objects is really an implementation detail of the interrupt controller. It shouldn't be open-coded in the machine code. Fix this by adding an intc_destroy() method that undoes what was done in intc_create(). Also NULLify the presenter pointers to avoid having stale pointers around. This will allow to reliably check if a vCPU has a valid presenter. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157192724208.3146912.7254684777515287626.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Laurent Vivier <lvivier@redhat.com>
* ppc: Reset the interrupt presenter from the CPU reset handlerCédric Le Goater2019-10-241-0/+14
| | | | | | | | | | | | | | | | | | | | | On the sPAPR machine and PowerNV machine, the interrupt presenters are created by a machine handler at the core level and are reset independently. This is not consistent and it raises issues when it comes to handle hot-plugged CPUs. In that case, the presenters are not reset. This is less of an issue in XICS, although a zero MFFR could be a concern, but in XIVE, the OS CAM line is not set and this breaks the presenting algorithm. The current code has workarounds which need a global cleanup. Extend the sPAPR IRQ backend and the PowerNV Chip class with a new cpu_intc_reset() handler called by the CPU reset handler and remove the XiveTCTX reset handler which is now redundant. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191022163812.330-6-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: Move SpaprIrq::nr_xirqs to SpaprMachineClassDavid Gibson2019-10-241-17/+16Star
| | | | | | | | | | | | | | | | | For the benefit of peripheral device allocation, the number of available irqs really wants to be the same on a given machine type version, regardless of what irq backends we are using. That's the case now, but only because we make sure the different SpaprIrq instances have the same value except for the special legacy one. Since this really only depends on machine type version, move the value to SpaprMachineClass instead of SpaprIrq. This also puts the code to set it to the lower value on old machine types right next to setting legacy_irq_allocation, which needs to go hand in hand. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr: Remove SpaprIrq::nr_msisDavid Gibson2019-10-241-9/+17
| | | | | | | | | | | The nr_msis value we use here has to line up with whether we're using legacy or modern irq allocation. Therefore it's safer to derive it based on legacy_irq_allocation rather than having SpaprIrq contain a canned value. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr, xics, xive: Move SpaprIrq::post_load hook to backendsDavid Gibson2019-10-241-41/+4Star
| | | | | | | | | | | The remaining logic in the post_load hook really belongs to the interrupt controller backends, and just needs to be called on the active controller (after the active controller is set to the right thing based on the incoming migration in the generic spapr_irq_post_load() logic). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr, xics, xive: Move SpaprIrq::reset hook logic into activate/deactivateDavid Gibson2019-10-241-64/+3Star
| | | | | | | | | | | | | | | | It turns out that all the logic in the SpaprIrq::reset hooks (and some in the SpaprIrq::post_load hooks) isn't really related to resetting the irq backend (that's handled by the backends' own reset routines). Rather its about getting the backend ready to be the active interrupt controller or stopping being the active interrupt controller - reset (and post_load) is just the only time that changes at present. To make this flow clearer, move the logic into the explicit backend activate and deactivate hooks. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr: Remove SpaprIrq::init_kvm hookDavid Gibson2019-10-241-49/+25Star
| | | | | | | | | | | | | | | | | This hook is a bit odd. The only caller is spapr_irq_init_kvm(), but it explicitly takes an SpaprIrq *, so it's never really called through the current SpaprIrq. Essentially this is just a way of passing through a function pointer so that spapr_irq_init_kvm() can handle some configuration and error handling logic without duplicating it between the xics and xive reset paths. So, make it just take that function pointer. Because of earlier reworks to the KVM connect/disconnect code in the xics and xive backends we can also eliminate some wrapper functions and streamline error handling a bit. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr, xics, xive: Match signatures for XICS and XIVE KVM connect routinesDavid Gibson2019-10-241-17/+5Star
| | | | | | | | | | | | | | | | | Both XICS and XIVE have routines to connect and disconnect KVM with similar but not identical signatures. This adjusts them to match exactly, which will be useful for further cleanups later. While we're there, we add an explicit return value to the connect path to streamline error reporting in the callers. We remove error reporting the disconnect path. In the XICS case this wasn't used at all. In the XIVE case the only error case was if the KVM device was set up, but KVM didn't have the capability to do so which is pretty obviously impossible. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr, xics, xive: Move dt_populate from SpaprIrq to SpaprInterruptControllerDavid Gibson2019-10-241-11/+9Star
| | | | | | | | | | | This method depends only on the active irq controller. Now that we've formalized the notion of active controller we can dispatch directly through that, rather than dispatching via SpaprIrq with the dual version having to do a second conditional dispatch. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr, xics, xive: Move print_info from SpaprIrq to SpaprInterruptControllerDavid Gibson2019-10-241-36/+8Star
| | | | | | | | | | | This method depends only on the active irq controller. Now that we've formalized the notion of active controller we can dispatch directly through that, rather than dispatching via SpaprIrq with the dual version having to do a second conditional dispatch. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr, xics, xive: Move set_irq from SpaprIrq to SpaprInterruptControllerDavid Gibson2019-10-241-31/+10Star
| | | | | | | | | | | This method depends only on the active irq controller. Now that we've formalized the notion of active controller we can dispatch directly through that, rather than dispatching via SpaprIrq with the dual version having to do a second conditional dispatch. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr: Formalize notion of active interrupt controllerDavid Gibson2019-10-241-0/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | spapr now has the mechanism of constructing both XICS and XIVE instances of the SpaprInterruptController interface. However, only one of the interrupt controllers will actually be active at any given time, depending on feature negotiation with the guest. This is handled in the current code via spapr_irq_current() which checks the OV5 vector from feature negotiation to determine the current backend. Determining the active controller at the point we need it like this can be pretty confusing, because it makes it very non obvious at what points the active controller can change. This can make it difficult to reason about the code and where a change of active controller could appear in sequence with other events. Make this mechanism more explicit by adding an 'active_intc' pointer and an explicit spapr_irq_update_active_intc() function to update it from the CAS state. We also add hooks on the intc backend which will get called when it is activated or deactivated. For now we just introduce the switch and hooks, later patches will actually start using them. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr, xics, xive: Move irq claim and free from SpaprIrq to ↵David Gibson2019-10-241-78/+32Star
| | | | | | | | | | | | | | SpaprInterruptController These methods, like cpu_intc_create, really belong to the interrupt controller, but need to be called on all possible intcs. Like cpu_intc_create, therefore, make them methods on the intc and always call it for all existing intcs. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr, xics, xive: Move cpu_intc_create from SpaprIrq to ↵David Gibson2019-10-241-57/+24Star
| | | | | | | | | | | | | | | | | | SpaprInterruptController This method essentially represents code which belongs to the interrupt controller, but needs to be called on all possible intcs, rather than just the currently active one. The "dual" version therefore calls into the xics and xive versions confusingly. Handle this more directly, by making it instead a method on the intc backend, and always calling it on every backend that exists. While we're there, streamline the error reporting a bit. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr, xics, xive: Introduce SpaprInterruptController QOM interfaceDavid Gibson2019-10-241-0/+13
| | | | | | | | | | | | | | | | | | | | | | | The SpaprIrq structure is used to represent ths spapr machine's irq backend. Except that it kind of conflates two concepts: one is the backend proper - a specific interrupt controller that we might or might not be using, the other is the irq configuration which covers the layout of irq space and which interrupt controllers are allowed. This leads to some pretty confusing code paths for the "dual" configuration where its hooks redirect to other SpaprIrq structures depending on the currently active irq controller. To clean this up, we start by introducing a new SpaprInterruptController QOM interface to represent strictly an interrupt controller backend, not counting anything configuration related. We implement this interface in the XICs and XIVE interrupt controllers, and in future we'll move relevant methods from SpaprIrq into it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr: Eliminate SpaprIrq::init hookDavid Gibson2019-10-041-69/+61Star
| | | | | | | | | | | | | | This method is used to set up the interrupt backends for the current configuration. However, this means some confusing redirection between the "dual" mode init and the init hooks for xics only and xive only modes. Since we now have simple flags indicating whether XICS and/or XIVE are supported, it's easier to just open code each initialization directly in spapr_irq_init(). This will also make some future cleanups simpler. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
* spapr: Add return value to spapr_irq_check()David Gibson2019-10-041-8/+7Star
| | | | | | | | | Explicitly return success or failure, rather than just relying on the Error ** parameter. This makes handling it less verbose in the caller. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
* spapr: Use less cryptic representation of which irq backends are supportedDavid Gibson2019-10-041-4/+8
| | | | | | | | | | | | | | | | SpaprIrq::ov5 stores the value for a particular byte in PAPR option vector 5 which indicates whether XICS, XIVE or both interrupt controllers are available. As usual for PAPR, the encoding is kind of overly complicated and confusing (though to be fair there are some backwards compat things it has to handle). But to make our internal code clearer, have SpaprIrq encode more directly which backends are available as two booleans, and derive the OV5 value from that at the point we need it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
* xive: Improve irq claim/free pathDavid Gibson2019-10-041-6/+5Star
| | | | | | | | | | | | | | | | | | | | | spapr_xive_irq_claim() returns a bool to indicate if it succeeded. But most of the callers and one callee use int return values and/or an Error * with more information instead. In any case, ints are a more common idiom for success/failure states than bools (one never knows what sense they'll be in). So instead change to an int return value to indicate presence of error + an Error * to describe the details through that call chain. It also didn't actually check if the irq was already claimed, which is one of the primary purposes of the claim path, so do that. spapr_xive_irq_free() also returned a bool... which no callers checked and was always true, so just drop it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
* spapr, xics, xive: Better use of assert()s on irq claim/free pathsDavid Gibson2019-10-041-8/+10
| | | | | | | | | | | | | | | | | The irq claim and free paths for both XICS and XIVE check for some validity conditions. Some of these represent genuine runtime failures, however others - particularly checking that the basic irq number is in a sane range - could only fail in the case of bugs in the callin code. Therefore use assert()s instead of runtime failures for those. In addition the non backend-specific part of the claim/free paths should only be used for PAPR external irqs, that is in the range SPAPR_XIRQ_BASE to the maximum irq number. Put assert()s for that into the top level dispatchers as well. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
* spapr: Handle freeing of multiple irqs in frontend onlyDavid Gibson2019-10-041-15/+12Star
| | | | | | | | | | | spapr_irq_free() can be used to free multiple irqs at once. That's useful for its callers, but there's no need to make the individual backend hooks handle this. We can loop across the irqs in spapr_irq_free() itself and have the hooks just do one at time. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr: Remove unhelpful tracepoints from spapr_irq_free_xics()David Gibson2019-10-041-4/+0Star
| | | | | | | | | | | These traces contain some useless information (the always-0 source#) and have no equivalents for XIVE mode. For now just remove them, and we can put back something more sensible if and when we need it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* spapr: Eliminate SpaprIrq:get_nodename methodDavid Gibson2019-10-041-22/+3Star
| | | | | | | | | | | | | | | | | | | | This method is used to determine the name of the irq backend's node in the device tree, so that we can find its phandle (after SLOF may have modified it from the phandle we initially gave it). But, in the two cases the only difference between the node name is the presence of a unit address. Searching for a node name without considering unit address is standard practice for the device tree, and fdt_subnode_offset() will do exactly that, making this method unecessary. While we're there, remove the XICS_NODENAME define. The name "interrupt-controller" is required by PAPR (and IEEE1275), and a bunch of places assume it already. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org>
* spapr: Simplify spapr_qirq() handlingDavid Gibson2019-10-041-35/+19Star
| | | | | | | | | | | | | | | | | | Currently spapr_qirq(), whic is used to find the qemu_irq for an spapr global irq number, redirects through the SpaprIrq::qirq method. But the array of qemu_irqs is allocated in the PAPR layer, not the backends, and so the method implementations all return the same thing, just differing in the preliminary checks they make. So, we can remove the method, and just implement spapr_qirq() directly, including all the relevant checks in one place. We change all those checks into assert()s as well, since a failure here indicates an error in the calling code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* spapr: Fix indexing of XICS irqsDavid Gibson2019-10-041-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | spapr global irq numbers are different from the source numbers on the ICS when using XICS - they're offset by XICS_IRQ_BASE (0x1000). But spapr_irq_set_irq_xics() was passing through the global irq number to the ICS code unmodified. We only got away with this because of a counteracting bug - we were incorrectly adjusting the qemu_irq we returned for a requested global irq number. That approach mostly worked but is very confusing, incorrectly relies on the way the qemu_irq array is allocated, and undermines the intention of having the global array of qemu_irqs for spapr have a consistent meaning regardless of irq backend. So, fix both set_irq and qemu_irq indexing. We rename some parameters at the same time to make it clear that they are referring to spapr global irq numbers. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
* spapr: Eliminate nr_irqs parameter to SpaprIrq::initDavid Gibson2019-10-041-11/+10Star
| | | | | | | | | | | The only reason this parameter was needed was to work around the inconsistent meaning of nr_irqs between xics and xive. Now that we've fixed that, we can consistently use the number directly in the SpaprIrq configuration. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
* spapr: Clarify and fix handling of nr_irqsDavid Gibson2019-10-041-34/+19Star
| | | | | | | | | | | | | | | | | | | | | Both the XICS and XIVE interrupt backends have a "nr-irqs" property, but it means slightly different things. For XICS (or, strictly, the ICS) it indicates the number of "real" external IRQs. Those start at XICS_IRQ_BASE (0x1000) and don't include the special IPI vector. For XIVE, however, it includes the whole IRQ space, including XIVE's many IPI vectors. The spapr code currently doesn't handle this sensibly, with the nr_irqs value in SpaprIrq having different meanings depending on the backend. We fix this by renaming nr_irqs to nr_xirqs and making it always indicate just the number of external irqs, adjusting the value we pass to XIVE accordingly. We also move to using common constants in most of the irq configurations, to make it clearer that the IRQ space looks the same to the guest (and emulated devices), even if the backend is different. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* xics: Create sPAPR specific ICS subtypeDavid Gibson2019-10-041-4/+2Star
| | | | | | | | | | | | We create a subtype of TYPE_ICS specifically for sPAPR. For now all this does is move the setup of the PAPR specific hcalls and RTAS calls to the realize() function for this, rather than requiring the PAPR code to explicitly call xics_spapr_init(). In future it will have some more function. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
* xics: Merge TYPE_ICS_BASE and TYPE_ICS_SIMPLE classesDavid Gibson2019-10-041-2/+2
| | | | | | | | | | | | | | | | | | | TYPE_ICS_SIMPLE is the only subtype of TYPE_ICS_BASE that's ever instantiated. The existence of different classes is mostly a hang over from when we (misguidedly) had separate subtypes for the KVM and non-KVM version of the device. There could be some call for an abstract base type for ICS variants that use a different representation of their state (PowerNV PHB3 might want this). The current split isn't really in the right place for that though. If we need this in future, we can re-implement it more in line with what we actually need. So, collapse the two classes together into just TYPE_ICS. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
* xics: Rename misleading ics_simple_*() functionsDavid Gibson2019-10-041-1/+1
| | | | | | | | | | There are a number of ics_simple_*() functions that aren't actually specific to TYPE_XICS_SIMPLE at all, and are equally valid on TYPE_XICS_BASE. Rename them to ics_*() accordingly. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
* spapr/irq: Introduce an ics_irq_free() helperCédric Le Goater2019-10-041-6/+3Star
| | | | | | | | | | It will help us to discard interrupt numbers which have not been claimed in the next patch. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190911133937.2716-2-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr/irq: Drop spapr_irq_msi_reset()Greg Kurz2019-08-211-5/+2Star
| | | | | | | | | | | | | PHBs already take care of clearing the MSIs from the bitmap during reset or unplug. No need to do this globally from the machine code. Rather add an assert to ensure that PHBs have acted as expected. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <156415228966.1064338.190189424190233355.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> [dwg: Fix crash in qtest case where spapr->irq_map can be NULL at the new assert()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Include hw/qdev-properties.h lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-11-06 15:37:36 +0100