summaryrefslogtreecommitdiffstats
path: root/qemu-img-cmds.hx
Commit message (Collapse)AuthorAgeFilesLines
* qemu-img: Unify [-b [-F]] documentationHanna Reitz2022-02-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | qemu-img convert documents the backing file and backing format options as follows: [-B backing_file [-F backing_fmt]] whereas qemu-img create has this: [-b backing_file] [-F backing_fmt] That is, for convert, we document that -F cannot be given without -B, while for create, way say that they are independent. Indeed, it is technically possible to give -F without -b, because it is left to the block driver to decide whether this is an error or not, so sometimes it is: $ qemu-img create -f qed -F qed test.qed 64M Formatting 'test.qed', fmt=qed size=67108864 backing_fmt=qed [...] And sometimes it is not: $ qemu-img create -f qcow2 -F qcow2 test.qcow2 64M Formatting 'test.qcow2', fmt=qcow2 cluster_size=65536 [...] qemu-img: test.qcow2: Backing format cannot be used without backing file Generally, it does not make much sense, though, and users should only give -F with -b, so document it that way, as we have already done for qemu-img convert (commit 1899bf47375ad40555dcdff12ba49b4b8b82df38). Reported-by: Tingting Mao <timao@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220131135908.32393-1-hreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: Consistent docs for convert -FEric Blake2021-11-021-1/+1
| | | | | | | | | | | Use consistent capitalization, and fix a missed line (we duplicate the qemu-img synopses in too many places). Fixes: 1899bf4737 (qemu-img: Add -F shorthand to convert) Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20210921142812.2631605-1-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
* qemu-img: Add -F shorthand to convertEric Blake2021-09-151-1/+1
| | | | | | | | | | | | | | | | | | | | Although we have long supported 'qemu-img convert -o backing_file=foo,backing_fmt=bar', the fact that we have a shortcut -B for backing_file but none for backing_fmt has made it more likely that users accidentally run into: qemu-img: warning: Deprecated use of backing file without explicit backing format when using -B instead of -o. For similarity with other qemu-img commands, such as create and compare, add '-F $fmt' as the shorthand for '-o backing_fmt=$fmt'. Update iotest 122 for coverage of both spellings. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20210913131735.1948339-1-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
* qemu-img: add support for rate limit in qemu-img convertZhengui2020-10-271-2/+2
| | | | | | | | | add support for rate limit in qemu-img convert. Signed-off-by: Zhengui <lizhengui@huawei.com> Message-Id: <1603205264-17424-3-git-send-email-lizhengui@huawei.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: add support for rate limit in qemu-img commitZhengui2020-10-271-2/+2
| | | | | | | | | add support for rate limit in qemu-img commit. Signed-off-by: Zhengui <lizhengui@huawei.com> Message-Id: <1603205264-17424-2-git-send-email-lizhengui@huawei.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img-cmds.hx: Update comment that mentions TexinfoMarkus Armbruster2020-10-121-1/+1
| | | | | | | | | | Missed in 3c95fdef94 "Update comments in .hx files that mention Texinfo". Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200929075824.1517969-2-armbru@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* block/amend: add 'force' optionMaxim Levitsky2020-07-061-2/+2
| | | | | | | | | | | | | | 'force' option will be used for some unsafe amend operations. This includes things like erasing last keyslot in luks based formats (which destroys the data, unless the master key is backed up by external means), but that _might_ be desired result. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200608094030.670121-4-mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* qemu-img: Add convert --bitmaps optionEric Blake2020-05-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | Make it easier to copy all the persistent bitmaps of (the top layer of) a source image along with its guest-visible contents, by adding a boolean flag for use with qemu-img convert. This is basically shorthand, as the same effect could be accomplished with a series of 'qemu-img bitmap --add' and 'qemu-img bitmap --merge -b source' commands, or by their corresponding QMP commands. Note that this command will fail in the same scenarios where 'qemu-img measure' omits a 'bitmaps size:' line, namely, when either the source or the destination lacks persistent bitmap support altogether. See also https://bugzilla.redhat.com/show_bug.cgi?id=1779893 While touching this, clean up a couple coding issues spotted in the same function: an extra blank line, and merging back-to-back 'if (!skip_create)' blocks. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200521192137.1120211-5-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
* qemu-img: Add bitmap sub-commandEric Blake2020-05-191-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Include actions for --add, --remove, --clear, --enable, --disable, and --merge (note that --clear is a bit of fluff, because the same can be accomplished by removing a bitmap and then adding a new one in its place, but it matches what QMP commands exist). Listing is omitted, because it does not require a bitmap name and because it was already possible with 'qemu-img info'. A single command line can play one or more bitmap commands in sequence on the same bitmap name (although all added bitmaps share the same granularity, and and all merged bitmaps come from the same source file). Merge defaults to other bitmaps in the primary image, but can also be told to merge bitmaps from a distinct image. While this supports --image-opts for the file being modified, I did not think it worth the extra complexity to support that for the source file in a cross-file merges. Likewise, I chose to have --merge only take a single source rather than following the QMP support for multiple merges in one go (although you can still use more than one --merge in the command line); in part because qemu-img is offline and therefore atomicity is not an issue. Upcoming patches will add iotest coverage of these commands while also testing other features. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200513011648.166876-7-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
* qemu-img: Fix stale comments on doc locationEric Blake2020-05-191-1/+1
| | | | | | | | | Missed in commit e13c59fa. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200513011648.166876-3-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
* qemu-img: Add --start-offset and --max-length to mapEyal Moscovici2020-05-181-2/+2
| | | | | | | | | | | | | | | | | | The mapping operation of large disks especially ones stored over a long chain of QCOW2 files can take a long time to finish. Additionally when mapping fails there was no way recover by restarting the mapping from the failed location. The new options, --start-offset and --max-length allows the user to divide these type of map operations into shorter independent tasks. Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Mark Kanda <mark.kanda@oracle.com> Co-developed-by: Yoav Elnekave <yoav.elnekave@oracle.com> Signed-off-by: Yoav Elnekave <yoav.elnekave@oracle.com> Signed-off-by: Eyal Moscovici <eyal.moscovici@oracle.com> Message-Id: <20200513133629.18508-5-eyal.moscovici@oracle.com> Signed-off-by: Eric Blake <eblake@redhat.com>
* qemu-img: Add --target-is-zero to convertDavid Edmondson2020-02-201-2/+2
| | | | | | | | | | | | | | | | In many cases the target of a convert operation is a newly provisioned target that the user knows is blank (reads as zero). In this situation there is no requirement for qemu-img to wastefully zero out the entire device. Add a new option, --target-is-zero, allowing the user to indicate that an existing target device will return zeros for all reads. Signed-off-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <20200205110248.2009589-2-david.edmondson@oracle.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* qemu-img: Place the '-i aio' option in alphabetical orderJulia Suvorova2020-02-061-2/+2
| | | | | | | | | | | | The '-i AIO' option was accidentally placed after '-n' and '-t'. Move it after '--flush-interval'. Signed-off-by: Julia Suvorova <jusual@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200205163008.204493-1-jusual@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* qemu-img-cmds.hx: Remove texinfo document fragmentsPeter Maydell2020-02-031-53/+3Star
| | | | | | | | | | | Now the qemu-img documentation has been converted to rST, we can remove the texinfo document fragments from qemu-img-cmds.hx, as they are no longer used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200124162606.8787-7-peter.maydell@linaro.org
* qemu-img-cmds.hx: Add rST documentation fragmentsPeter Maydell2020-02-031-1/+42
| | | | | | | | | | | | | Add the rST versions of the documentation fragments. Once we've converted qemu-img.texi to rST we can delete the texi fragments; for the moment we leave them in place. (Commit created with the aid of emacs query-replace-regexp from "@var{\([^}]*\)}" to "\,(upcase \1))".) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200124162606.8787-5-peter.maydell@linaro.org
* qemu-img: adds option to use aio engine for benchmarkingAarushi Mehta2020-01-301-2/+2
| | | | | | | | | Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20200120141858.587874-13-stefanha@redhat.com Message-Id: <20200120141858.587874-13-stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* qemu-img: Add salvaging mode to convertMax Reitz2019-06-141-2/+2
| | | | | | | | | | | | This adds a salvaging mode (--salvage) to qemu-img convert which ignores read errors and treats the respective areas as containing only zeroes. This can be used for instance to at least partially recover the data from terminally corrupted qcow2 images. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190507203508.18026-3-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* qemu-img: fix .hx and .texi disparityJohn Snow2019-04-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turns out that having options listed in three places continues to be a bad idea. I'm still toying with the idea of an improved infrastructure here, but in the meantime, another bandaid. There are three locations: (1) .hx file, formatted as texi (2) .hx file, formatted as human readable. (3) .texi file, as section headers, formatted as texi. You can compare the two summaries within the .hx file like so: Human-readable command summaries: `./qemu-img --help | grep 'Command syntax' -A14` Detokenized texi command summaries: `grep "@item" qemu-img-cmds.hx | sed -E 's|@var\{([^\}]*?)\}|\1|g'` You can compare the two separate texi summaries like so: Texi command summaries: `grep "@item" qemu-img-cmds.hx"` Texi command headers: grep -E "@item.*@var" qemu-img.texi | tail -14 Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 20190409210655.777-1-jsnow@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* qemu-img: Add -C option for convert with copy offloadingFam Zheng2018-07-301-1/+1
| | | | | Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: Remove deprecated -s snapshot_id_or_name optionThomas Huth2018-06-111-2/+2
| | | | | | | | | | It has been marked as deprecated since QEMU v2.0 already, so it is time now to finally remove it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1528288551-31641-1-git-send-email-thuth@redhat.com Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* qemu-img-cmds.hx: add passive-aggressive noteJohn Snow2018-05-201-0/+3
| | | | | | | | | | | | I'm kidding. It's very easy to forget there are per-command sections in the texi, and insane that we don't autogenerate those, too. Until then, leave a little post-it note in this .hx file until I find a way to delete it. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* qemu-img: Make documentation between .texi and .hx consistentJohn Snow2018-05-201-2/+2
| | | | | | | | | | | | | These are also different and out of order for whatever reason. I'd like to automate this in the future, but for now let's put on the band-aid. In the case of resize, there were options missing from all three docstrings; the new string is based on the code. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* qemu-img-commands.hx: argument ordering fixupsJohn Snow2018-05-201-3/+3
| | | | | | | | | | The TEXI and string versions are actually identical, except for markup. We can probably automate this... but make the ordering the same until then. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* qemu-img: add --shrink flag for resizePavel Butsykin2017-09-261-2/+2
| | | | | | | | | | | | | The flag is additional precaution against data loss. Perhaps in the future the operation shrink without this flag will be blocked for all formats, but for now we need to maintain compatibility with raw. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20170918124230.8152-2-pbutsykin@virtuozzo.com [mreitz: Added a missing space to a warning] Signed-off-by: Max Reitz <mreitz@redhat.com>
* qemu-img: Sort sub-command names in --helpEric Blake2017-08-081-9/+13
| | | | | | | | | | | 'amend' and 'create' were not listed alphabetically; hoist them earlier. Separate the @end table block to make it easier to copy-and-paste the addition of future sub-commands. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170803163353.19558-2-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu-img: Check for backing image if specified during createJohn Snow2017-07-181-2/+2
| | | | | | | | | | | | | | | | | | | | | Or, rather, force the open of a backing image if one was specified for creation. Using a similar -unsafe option as rebase, allow qemu-img to ignore the backing file validation if possible. It may not always be possible, as in the existing case when a filesize for the new image was not specified. This is accomplished by shifting around the conditionals in bdrv_img_create, such that a backing file is always opened unless we provide BDRV_O_NO_BACKING. qemu-img is adjusted to pass this new flag when -u is provided to create. Sorry for the heinous looking diffstat, but it's mostly whitespace. Inspired by: https://bugzilla.redhat.com/show_bug.cgi?id=1213786 Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: add measure subcommandStefan Hajnoczi2017-07-111-0/+6
| | | | | | | | | | | | | The measure subcommand calculates the size required by a new image file. This can be used by users or management tools that need to allocate space on an LVM volume, SAN LUN, etc before creating or converting an image file. Suggested-by: Maor Lipchuk <mlipchuk@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20170705125738.8777-8-stefanha@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* qemu-img: introduce --target-image-opts for 'convert' commandDaniel P. Berrange2017-05-291-2/+2
| | | | | | | | | | | | | | | | The '--image-opts' flag indicates whether the source filename includes options. The target filename has to remain in the plain filename format though, since it needs to be passed to bdrv_create(). When using --skip-create though, it would be possible to use image-opts syntax. This adds --target-image-opts to indicate that the target filename includes options. Currently this mandates use of the --skip-create flag too. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170515164712.6643-4-berrange@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* qemu-img: Fix documentation of convertFam Zheng2017-05-291-2/+2
| | | | | | | | | | It got lost in commit a8d16f9ca "qemu-img: Update documentation for -U". Reported-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 20170515103551.31313-1-famz@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
* qemu-img: Update documentation for -UFam Zheng2017-05-111-18/+18
| | | | | Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: Document backing optionsMax Reitz2017-04-271-4/+4
| | | | | | | | | | | | The create and convert subcommands have shorthands to set the backing_file and, in the case of create, the backing_fmt options for the new image. However, they have not been documented so far, which is remedied by this patch. Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: img_create does not support image-opts, fix docsJeff Cody2017-04-071-2/+2
| | | | | | | | | | The documentation and help for qemu-img claims that 'qemu-img create' will take the '--image-opts' argument. This is not true, so this patch removes those claims. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: make convert asyncPeter Lieven2017-02-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | the convert process is currently completely implemented with sync operations. That means it reads one buffer and then writes it. No parallelism and each sync request takes as long as it takes until it is completed. This can be a big performance hit when the convert process reads and writes to devices which do not benefit from kernel readahead or pagecache. In our environment we heavily have the following two use cases when using qemu-img convert. a) reading from NFS and writing to iSCSI for deploying templates b) reading from iSCSI and writing to NFS for backups In both processes we use libiscsi and libnfs so we have no kernel cache. This patch changes the convert process to work with parallel running coroutines which can significantly improve performance for network storage devices: qemu-img (master) nfs -> iscsi 22.8 secs nfs -> ram 11.7 secs ram -> iscsi 12.3 secs qemu-img-async (8 coroutines, in-order write disabled) nfs -> iscsi 11.0 secs nfs -> ram 10.4 secs ram -> iscsi 9.0 secs This patches introduces 2 new cmdline parameters. The -m parameter to specify the number of coroutines running in parallel (defaults to 8). And the -W parameter to allow qemu-img to write to the target out of order rather than sequential. This improves performance as the writes do not have to wait for each other to complete. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: add skip option to ddReda Sallahi2016-09-201-2/+2
| | | | | | | | | | | This adds the skip option which allows qemu-img dd to skip a number of blocks before copying the input. A test case was added to test the skip option. Signed-off-by: Reda Sallahi <fullmanet@gmail.com> Message-id: 20160810141609.32727-1-fullmanet@gmail.com Signed-off-by: Max Reitz <mreitz@redhat.com>
* qemu-img: add the 'dd' subcommandReda Sallahi2016-09-201-0/+6
| | | | | | | | | | | | | | | | | | | This patch adds a basic dd subcommand analogous to dd(1) to qemu-img. For the start, this implements the bs, if, of and count options and requires both if and of to be specified (no stdin/stdout if not specified) and doesn't support tty, pipes, etc. The image format must be specified with -O for the output if the raw format is not the intended one. Two tests are added to test qemu-img dd. Signed-off-by: Reda Sallahi <fullmanet@gmail.com> Message-id: 20160810024312.14544-1-fullmanet@gmail.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> [mreitz: Moved test 158 to 170] Signed-off-by: Max Reitz <mreitz@redhat.com>
* qemu-img bench: Add --flush-intervalKevin Wolf2016-06-081-2/+2
| | | | | | | | This options allows to flush the image periodically during write tests. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
* qemu-img bench: Implement -S (step size)Kevin Wolf2016-06-081-2/+2
| | | | | | | | | | | | With this new option, qemu-img bench can be told to advance the current offset after each request by a different value than the buffer size. This is useful for controlling the conditions for cluster allocation in image formats (e.g. qcow2 cluster allocation with COW in front of the request, or COW areas that aren't overwritten immediately). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
* qemu-img bench: Make start offset configurableKevin Wolf2016-06-081-2/+2
| | | | | | | | | This patch adds an option the specify the offset of the first request made by qemu-img bench. This allows to benchmark misaligned requests. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
* qemu-img bench: Sequential writesKevin Wolf2016-06-081-2/+2
| | | | | | | | | This extends qemu-img bench with an option that makes it use sequential writes instead of reads for the test run. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
* qemu-img benchKevin Wolf2016-06-081-0/+6
| | | | | | | | | | | This adds a qemu-img command that allows doing some simple benchmarks for the block layer without involving guest devices and a real VM. For the start, this implements only a test of sequential reads. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
* qemu-img: allow specifying image as a set of options argsDaniel P. Berrange2016-02-221-22/+22
| | | | | | | | | | | | | | | | | | | Currently qemu-img allows an image filename to be passed on the command line, but unless using the JSON format, it does not have a way to set any options except the format eg qemu-img info https://127.0.0.1/images/centos7.iso This adds a --image-opts arg that indicates that the positional filename should be interpreted as a full option string, not just a filename. qemu-img info --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off This flag is mutually exclusive with the '-f' / '-F' flags. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: add support for --object command line argDaniel P. Berrange2016-02-221-22/+22
| | | | | | | | | | | | | | | Allow creation of user creatable object types with qemu-img via a new --object command line arg. This will be used to supply passwords and/or encryption keys to the various block driver backends via the recently added 'secret' object type. # printf letmein > mypasswd.txt # qemu-img info --object secret,id=sec0,file=mypasswd.txt \ ...other info args... Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: Add progress output for amendMax Reitz2014-11-031-2/+2
| | | | | | | | | | | | Now that bdrv_amend_options() supports a status callback, use it to display a progress report. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1414404776-4919-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* qemu-img: Specify backing file for commitMax Reitz2014-11-031-2/+2
| | | | | | | | | | | | | | | Introduce a new parameter for qemu-img commit which may be used to explicitly specify the backing file into which an image should be committed if the backing chain has more than a single layer. [Applied Eric Blake's qemu-img.texi documentation rewording --Stefan] Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1414159063-25977-12-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* qemu-img: Enable progress output for commitMax Reitz2014-11-031-2/+2
| | | | | | | | | | | Implement progress output for the commit command by querying the progress of the block job. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1414159063-25977-11-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* qemu-img: Empty image after commitMax Reitz2014-11-031-2/+2
| | | | | | | | | | | After the top image has been committed, it should be emptied unless specified otherwise. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1414159063-25977-10-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* qemu-img: Allow cache mode specification for amendMax Reitz2014-08-221-2/+2
| | | | | | | | | | | qemu-img amend may extensively modify the target image, depending on the options to be amended (e.g. conversion to qcow2 compat level 0.10 from 1.1 for an image with many unallocated zero clusters). Therefore it makes sense to allow the user to specify the cache mode to be used. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: Allow source cache mode specificationMax Reitz2014-08-221-8/+8
| | | | | | | | | | | | | | | | | | | Many qemu-img subcommands only read the source file(s) once. For these use cases, a full write-back cache is unnecessary and mainly clutters host cache memory. Though this is generally no concern as cache memory is freely available and can be scaled by the host OS, it may become a concern with thin provisioning. For these cases, it makes sense to allow users to freely specify the source cache mode (e.g. use no cache at all). This commit adds a new switch (-T) for the qemu-img subcommands check, compare, convert and rebase to specify the cache to be used for source images (the backing file in case of rebase). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-img: add -l for snapshot in convertWenchao Xia2013-12-041-2/+2
| | | | | | | | Now qemu-img convert have similar options as qemu-nbd for internal snapshot. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* block: Image file option amendmentMax Reitz2013-09-121-0/+6
| | | | | | | | | | This patch adds the "amend" option to qemu-img which allows changing image options on existing image files. It also adds the generic bdrv implementation which is basically just a wrapper for the image format specific function. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-06-01 07:23:41 +0200