# Makefile for to build a gcc/uClibc toolchain
#
# Copyright (C) 2002-2003 Erik Andersen <andersen@uclibc.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
ifeq ($(USE_UCLIBC_TOOLCHAIN),true)
ifneq ($(GCC_2_95_TOOLCHAIN),true)
#############################################################
#
# You should probably leave this stuff alone unless you are
# hacking on the toolchain...
#
#############################################################
#Directory in which to build the toolchain
TOOL_BUILD_DIR=$(BASE_DIR)/toolchain_build_$(ARCH)
TARGET_LANGUAGES:=c,c++
# If you want multilib enabled, enable this...
MULTILIB:=--enable-multilib
#############################################################
#
# Where we can find things....
#
# for various dependancy reasons, these need to live
# here at the top... Easier to find things here anyways...
#
#############################################################
BINUTILS_SITE:=ftp://ftp.gnu.org/gnu/binutils/
BINUTILS_SOURCE:=binutils-2.13.2.1.tar.bz2
BINUTILS_DIR:=$(TOOL_BUILD_DIR)/binutils-2.13.2.1
#
# Perhaps you would perfer to use the older 2.12.1 version?
#BINUTILS_SITE:=ftp://ftp.gnu.org/gnu/binutils/
#BINUTILS_SOURCE:=binutils-2.12.1.tar.bz2
#BINUTILS_DIR:=$(TOOL_BUILD_DIR)/binutils-2.12.1
ifeq ($(USE_UCLIBC_SNAPSHOT),true)
# Be aware that this changes daily....
UCLIBC_DIR=$(BUILD_DIR)/uClibc
UCLIBC_SOURCE=uClibc-snapshot.tar.bz2
UCLIBC_SITE:=http://www.uclibc.org/downloads/snapshots
else
UCLIBC_DIR:=$(BUILD_DIR)/uClibc-0.9.19
UCLIBC_SOURCE:=uClibc-0.9.19.tar.bz2
UCLIBC_SITE:=http://www.uclibc.org/downloads
endif
GCC_SITE:=ftp://ftp.gnu.org/gnu/gcc/
GCC_SOURCE:=gcc-3.2.3.tar.gz
GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-3.2.3
#############################################################
#
# Setup some initial paths
#
#############################################################
$(STAGING_DIR)/.setup:
mkdir -p $(TOOL_BUILD_DIR)
mkdir -p $(DL_DIR)
mkdir -p $(STAGING_DIR)
mkdir -p $(STAGING_DIR)/include
mkdir -p $(STAGING_DIR)/lib/gcc-lib
mkdir -p $(STAGING_DIR)/usr/lib
mkdir -p $(STAGING_DIR)/usr/bin;
mkdir -p $(STAGING_DIR)/$(GNU_TARGET_NAME)/
(cd $(STAGING_DIR)/$(GNU_TARGET_NAME); ln -fs ../lib)
(cd $(STAGING_DIR)/$(GNU_TARGET_NAME); ln -fs ../include)
(cd $(STAGING_DIR)/$(GNU_TARGET_NAME); ln -fs ../include sys-include)
(cd $(STAGING_DIR)/usr/lib; ln -fs ../../lib/gcc-lib)
touch $(STAGING_DIR)/.setup
#############################################################
#
# Setup some initial stuff
#
#############################################################
uclibc_toolchain: gcc_final
uclibc_toolchain-source: $(DL_DIR)/$(BINUTILS_SOURCE) $(DL_DIR)/$(UCLIBC_SOURCE) $(DL_DIR)/$(GCC_SOURCE)
uclibc_toolchain-clean: gcc_final-clean uclibc-clean gcc_initial-clean binutils-clean
uclibc_toolchain-dirclean: gcc_final-dirclean uclibc-dirclean gcc_initial-dirclean binutils-dirclean
#############################################################
#
# build binutils
#
#############################################################
BINUTILS_DIR1:=$(TOOL_BUILD_DIR)/binutils-build
$(DL_DIR)/$(BINUTILS_SOURCE):
$(WGET) -P $(DL_DIR) $(BINUTILS_SITE)/$(BINUTILS_SOURCE)
$(BINUTILS_DIR)/.unpacked: $(DL_DIR)/$(BINUTILS_SOURCE)
bzcat $(DL_DIR)/$(BINUTILS_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
touch $(BINUTILS_DIR)/.unpacked
$(BINUTILS_DIR)/.patched: $(BINUTILS_DIR)/.unpacked
# Apply any files named binutils-*.patch from the source directory to binutils
$(SOURCE_DIR)/patch-kernel.sh $(BINUTILS_DIR) $(SOURCE_DIR) binutils-*.patch
#
# Enable combreloc, since it is such a nice thing to have...
#
-perl -i -p -e "s,link_info.combreloc = false,link_info.combreloc = true,g;" \
$(BINUTILS_DIR)/ld/ldmain.c
#
# Hack binutils to use the correct shared lib loader
#
(cd $(BINUTILS_DIR); perl -i -p -e "s,#.*define.*ELF_DYNAMIC_INTERPRETER.*\".*\"\
,#define ELF_DYNAMIC_INTERPRETER \"/lib/ld-uClibc.so.0\",;" \
`grep -lr "#.*define.*ELF_DYNAMIC_INTERPRETER.*\".*\"" $(BINUTILS_DIR)`);
touch $(BINUTILS_DIR)/.patched
$(BINUTILS_DIR1)/.configured: $(BINUTILS_DIR)/.patched
mkdir -p $(BINUTILS_DIR1)
(cd $(BINUTILS_DIR1); CC=$(HOSTCC) \
$(BINUTILS_DIR)/configure \
--target=$(GNU_TARGET_NAME) \
--host=$(GNU_HOST_NAME) \
--build=$(GNU_HOST_NAME) \
--prefix=$(STAGING_DIR) \
--exec-prefix=$(STAGING_DIR) \
--bindir=$(STAGING_DIR)/bin \
--sbindir=$(STAGING_DIR)/sbin \
--sysconfdir=$(STAGING_DIR)/etc \
--datadir=$(STAGING_DIR)/share \
--includedir=$(STAGING_DIR)/include \
--libdir=$(STAGING_DIR)/lib \
--localstatedir=$(STAGING_DIR)/var \
--mandir=$(STAGING_DIR)/man \
--infodir=$(STAGING_DIR)/info \
--enable-targets=$(GNU_TARGET_NAME) \
$(MULTILIB) \
--program-prefix=$(ARCH)-uclibc-);
touch $(BINUTILS_DIR1)/.configured
$(BINUTILS_DIR1)/binutils/objdump: $(BINUTILS_DIR1)/.configured
$(MAKE) -C $(BINUTILS_DIR1);
$(STAGING_DIR)/$(GNU_TARGET_NAME)/bin/ld: $(BINUTILS_DIR1)/binutils/objdump
$(MAKE) -C $(BINUTILS_DIR1) install
rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc \
$(STAGING_DIR)/share/locale
mkdir -p $(STAGING_DIR)/usr/bin;
set -e; \
for app in addr2line ar as c++filt gprof ld nm objcopy \
objdump ranlib readelf size strings strip ; \
do \
if [ -x $(STAGING_DIR)/bin/$(ARCH)-uclibc-$${app} ] ; then \
(cd $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin; \
ln -fs ../../bin/$(ARCH)-uclibc-$${app} $${app}; \
); \
(cd $(STAGING_DIR)/usr/bin; \
ln -fs ../../bin/$(ARCH)-uclibc-$${app} $${app}; \
); \
fi; \
done;
$(STAGING_DIR)/lib/libg.a:
$(STAGING_DIR)/$(GNU_TARGET_NAME)/bin/ar rv $(STAGING_DIR)/lib/libg.a;
binutils: $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin/ld $(STAGING_DIR)/lib/libg.a
binutils-clean:
rm -f $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)*
-$(MAKE) -C $(BINUTILS_DIR1) clean
binutils-dirclean:
rm -rf $(BINUTILS_DIR1)
#############################################################
#
# Next build first pass gcc compiler
#
#############################################################
GCC_BUILD_DIR1:=$(TOOL_BUILD_DIR)/gcc-initial
$(DL_DIR)/$(GCC_SOURCE):
$(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)
$(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
zcat $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
touch $(GCC_DIR)/.unpacked
$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
# Apply any files named gcc-*.patch from the source directory to gcc
$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc-*.patch
touch $(GCC_DIR)/.patched
$(GCC_DIR)/.gcc_build_hacks: $(GCC_DIR)/.patched
#
# Hack things to use the correct shared lib loader
#
(cd $(GCC_DIR); set -e; export LIST=`grep -lr -- "-dynamic-linker.*\.so[\.0-9]*" *`;\
if [ -n "$$LIST" ] ; then \
perl -i -p -e "s,-dynamic-linker.*\.so[\.0-9]*},\
-dynamic-linker /lib/ld-uClibc.so.0},;" $$LIST; fi);
#
# Prevent system glibc start files from leaking in uninvited...
#
perl -i -p -e "s,standard_startfile_prefix_1 = \".*,standard_startfile_prefix_1 =\
\"$(STAGING_DIR)/lib/\";,;" $(GCC_DIR)/gcc/gcc.c;
perl -i -p -e "s,standard_startfile_prefix_2 = \".*,standard_startfile_prefix_2 =\
\"$(STAGING_DIR)/usr/lib/\";,;" $(GCC_DIR)/gcc/gcc.c;
#
# Prevent system glibc include files from leaking in uninvited...
#
perl -i -p -e "s,^NATIVE_SYSTEM_HEADER_DIR.*,NATIVE_SYSTEM_HEADER_DIR=\
$(STAGING_DIR)/include,;" $(GCC_DIR)/gcc/Makefile.in;
perl -i -p -e "s,^CROSS_SYSTEM_HEADER_DIR.*,CROSS_SYSTEM_HEADER_DIR=\
$(STAGING_DIR)/include,;" $(GCC_DIR)/gcc/Makefile.in;
perl -i -p -e "s,^#define.*STANDARD_INCLUDE_DIR.*,#define STANDARD_INCLUDE_DIR \
\"$(STAGING_DIR)/include\",;" $(GCC_DIR)/gcc/cppdefault.h;
#
# Prevent gcc from using the unwind-dw2-fde-glibc code
#
perl -i -p -e "s,^#ifndef inhibit_libc,#define inhibit_libc\n\
#ifndef inhibit_libc,g;" $(GCC_DIR)/gcc/unwind-dw2-fde-glibc.c;
touch $(GCC_DIR)/.gcc_build_hacks
# The --without-headers option stopped working with gcc 3.0 and has never been
# # fixed, so we need to actually have working C library header files prior to
# # the step or libgcc will not build...
$(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.gcc_build_hacks
mkdir -p $(GCC_BUILD_DIR1)
(cd $(GCC_BUILD_DIR1); PATH=$(TARGET_PATH) AR=$(TARGET_CROSS)ar \
RANLIB=$(TARGET_CROSS)ranlib CC=$(HOSTCC) \
$(GCC_DIR)/configure \
--target=$(GNU_TARGET_NAME) \
--host=$(GNU_HOST_NAME) \
--build=$(GNU_HOST_NAME) \
--prefix=$(STAGING_DIR) \
--exec-prefix=$(STAGING_DIR) \
--bindir=$(STAGING_DIR)/bin \
--sbindir=$(STAGING_DIR)/sbin \
--sysconfdir=$(STAGING_DIR)/etc \
--datadir=$(STAGING_DIR)/share \
--includedir=$(STAGING_DIR)/include \
--libdir=$(STAGING_DIR)/lib \
--localstatedir=$(STAGING_DIR)/var \
--mandir=$(STAGING_DIR)/man \
--infodir=$(STAGING_DIR)/info \
--with-local-prefix=$(STAGING_DIR)/usr/local \
--oldincludedir=$(STAGING_DIR)/include $(MULTILIB) \
--enable-target-optspace --disable-nls --with-gnu-ld \
--disable-shared --enable-languages=c --disable-__cxa_atexit \
$(EXTRA_GCC_CONFIG_OPTIONS) --program-prefix=$(ARCH)-uclibc-);
touch $(GCC_BUILD_DIR1)/.configured
$(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR1) \
AR_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ar \
RANLIB_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ranlib
touch $(GCC_BUILD_DIR1)/.compiled
$(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc: $(GCC_BUILD_DIR1)/.compiled
PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR1) install;
#Cleanup then mess when --program-prefix mysteriously fails
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-cpp $(STAGING_DIR)/bin/$(ARCH)-uclibc-cpp
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-gcc $(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc
rm -f $(STAGING_DIR)/bin/gccbug $(STAGING_DIR)/bin/gcov
rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc \
$(STAGING_DIR)/share/locale
gcc_initial: binutils $(UCLIBC_DIR)/.configured $(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc
gcc_initial-clean:
rm -rf $(GCC_BUILD_DIR1)
rm -f $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)*
gcc_initial-dirclean:
rm -rf $(GCC_BUILD_DIR1)
#############################################################
#
# uClibc is built in two stages. First, we install the uClibc
# include files so that gcc can be built. Later when gcc for
# the target arch has been compiled, we can actually compile
# uClibc for the target...
#
#############################################################
$(DL_DIR)/$(UCLIBC_SOURCE):
$(WGET) -P $(DL_DIR) $(UCLIBC_SITE)/$(UCLIBC_SOURCE)
$(UCLIBC_DIR)/.unpacked: $(DL_DIR)/$(UCLIBC_SOURCE)
bzcat $(DL_DIR)/$(UCLIBC_SOURCE) | tar -C $(BUILD_DIR) -xvf -
touch $(UCLIBC_DIR)/.unpacked
$(UCLIBC_DIR)/.configured: $(UCLIBC_DIR)/.unpacked $(BUILD_DIR)/linux/.configured
perl -i -p -e 's,^CROSS=.*,TARGET_ARCH=$(ARCH)\nCROSS=$(TARGET_CROSS),g' \
$(UCLIBC_DIR)/Rules.mak
cp $(SOURCE_DIR)/uClibc.config $(UCLIBC_DIR)/.config
perl -i -p -e 's,^KERNEL_SOURCE=.*,KERNEL_SOURCE=\"$(LINUX_DIR)\",g' \
$(UCLIBC_DIR)/.config
perl -i -p -e 's,^DEVEL_PREFIX=.*,DEVEL_PREFIX=\"$(STAGING_DIR)\",g' \
$(UCLIBC_DIR)/.config
perl -i -p -e 's,^SYSTEM_DEVEL_PREFIX=.*,SYSTEM_DEVEL_PREFIX=\"$(STAGING_DIR)\",g' \
$(UCLIBC_DIR)/.config
perl -i -p -e 's,^DEVEL_TOOL_PREFIX=.*,DEVEL_TOOL_PREFIX=\"$(STAGING_DIR)/usr\",g' \
$(UCLIBC_DIR)/.config
perl -i -p -e 's,^SHARED_LIB_LOADER_PATH=.*,SHARED_LIB_LOADER_PATH=\"/lib\",g' \
$(UCLIBC_DIR)/.config
perl -i -p -e 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y\nUCLIBC_HAS_LOCALE=n,g' \
$(UCLIBC_DIR)/.config
perl -i -p -e 's,^GCC_BIN.*,GCC_BIN=$(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc,g' \
$(UCLIBC_DIR)/extra/gcc-uClibc/Makefile
perl -i -p -e 's,^LD_BIN.*,LD_BIN=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ld,g' \
$(UCLIBC_DIR)/extra/gcc-uClibc/Makefile
$(MAKE) -C $(UCLIBC_DIR) oldconfig
$(MAKE) -C $(UCLIBC_DIR) headers install_dev;
touch $(UCLIBC_DIR)/.configured
$(UCLIBC_DIR)/lib/libc.a: $(UCLIBC_DIR)/.configured
$(MAKE) -C $(UCLIBC_DIR)
$(STAGING_DIR)/lib/libc.a: $(UCLIBC_DIR)/lib/libc.a
$(MAKE) -C $(UCLIBC_DIR) install_dev install_runtime install_utils
ifneq ($(TARGET_DIR),)
$(TARGET_DIR)/lib/libc.so.0: $(STAGING_DIR)/lib/libc.a
$(MAKE) -C $(UCLIBC_DIR) DEVEL_PREFIX=$(TARGET_DIR) \
SYSTEM_DEVEL_PREFIX=$(TARGET_DIR) \
DEVEL_TOOL_PREFIX=$(TARGET_DIR)/usr install_runtime
$(TARGET_DIR)/usr/bin/ldd: $(TARGET_DIR)/lib/libc.so.0
$(MAKE) -C $(UCLIBC_DIR) PREFIX=$(TARGET_DIR) install_target_utils
(cd $(TARGET_DIR)/sbin; ln -sf /bin/true ldconfig)
UCLIBC_TARGETS=$(TARGET_DIR)/lib/libc.so.0 $(TARGET_DIR)/usr/bin/ldd
endif
uclibc: $(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc $(STAGING_DIR)/lib/libc.a \
$(UCLIBC_TARGETS)
uclibc-clean:
-$(MAKE) -C $(UCLIBC_DIR) clean
rm -f $(UCLIBC_DIR)/.config
uclibc-dirclean:
rm -rf $(UCLIBC_DIR)
#############################################################
#
# second pass compiler build. Build the compiler targeting
# the newly built shared uClibc library.
#
#############################################################
GCC_BUILD_DIR2:=$(TOOL_BUILD_DIR)/gcc-final
$(GCC_DIR)/.g++_build_hacks: $(GCC_DIR)/.patched
#
# Hack up the soname for libstdc++
#
perl -i -p -e "s,\.so\.1,.so.0.9.9,g;" $(GCC_DIR)/gcc/config/t-slibgcc-elf-ver;
perl -i -p -e "s,-version-info.*[0-9]:[0-9]:[0-9],-version-info 9:9:0,g;" \
$(GCC_DIR)/libstdc++-v3/src/Makefile.am $(GCC_DIR)/libstdc++-v3/src/Makefile.in;
perl -i -p -e "s,3\.0\.0,9.9.0,g;" $(GCC_DIR)/libstdc++-v3/acinclude.m4 \
$(GCC_DIR)/libstdc++-v3/aclocal.m4 $(GCC_DIR)/libstdc++-v3/configure;
#
# For now, we don't support locale-ified ctype (we will soon),
# so bypass that problem for now...
#
perl -i -p -e "s,defined.*_GLIBCPP_USE_C99.*,1,g;" \
$(GCC_DIR)/libstdc++-v3/config/locale/generic/c_locale.cc;
cp $(GCC_DIR)/libstdc++-v3/config/os/generic/bits/ctype_base.h \
$(GCC_DIR)/libstdc++-v3/config/os/gnu-linux/bits/
cp $(GCC_DIR)/libstdc++-v3/config/os/generic/bits/ctype_inline.h \
$(GCC_DIR)/libstdc++-v3/config/os/gnu-linux/bits/
cp $(GCC_DIR)/libstdc++-v3/config/os/generic/bits/ctype_noninline.h \
$(GCC_DIR)/libstdc++-v3/config/os/gnu-linux/bits/
touch $(GCC_DIR)/.g++_build_hacks
$(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.g++_build_hacks
mkdir -p $(GCC_BUILD_DIR2)
(cd $(GCC_BUILD_DIR2); PATH=$(TARGET_PATH) AR=$(TARGET_CROSS)ar \
RANLIB=$(TARGET_CROSS)ranlib LD=$(TARGET_CROSS)ld \
NM=$(TARGET_CROSS)nm CC=$(HOSTCC) \
$(GCC_DIR)/configure \
--target=$(GNU_TARGET_NAME) \
--host=$(GNU_HOST_NAME) \
--build=$(GNU_HOST_NAME) \
--prefix=$(STAGING_DIR) \
--exec-prefix=$(STAGING_DIR) \
--bindir=$(STAGING_DIR)/bin \
--sbindir=$(STAGING_DIR)/sbin \
--sysconfdir=$(STAGING_DIR)/etc \
--datadir=$(STAGING_DIR)/share \
--localstatedir=$(STAGING_DIR)/var \
--mandir=$(STAGING_DIR)/man \
--infodir=$(STAGING_DIR)/info \
--with-local-prefix=$(STAGING_DIR)/usr/local \
--libdir=$(STAGING_DIR)/lib \
--includedir=$(STAGING_DIR)/include \
--with-gxx-include-dir=$(STAGING_DIR)/include/c++ \
--oldincludedir=$(STAGING_DIR)/include \
--enable-shared $(MULTILIB) \
--enable-target-optspace --disable-nls \
--with-gnu-ld --disable-__cxa_atexit \
--enable-languages=$(TARGET_LANGUAGES) \
$(EXTRA_GCC_CONFIG_OPTIONS) \
--program-prefix=$(ARCH)-uclibc- \
);
touch $(GCC_BUILD_DIR2)/.configured
$(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
PATH=$(TARGET_PATH) CC=$(HOSTCC) \
AR_FOR_TARGET=$(TARGET_CROSS)ar RANLIB_FOR_TARGET=$(TARGET_CROSS)ranlib \
LD_FOR_TARGET=$(TARGET_CROSS)ld NM_FOR_TARGET=$(TARGET_CROSS)nm \
CC_FOR_TARGET=$(TARGET_CROSS)gcc $(MAKE) -C $(GCC_BUILD_DIR2)
touch $(GCC_BUILD_DIR2)/.compiled
$(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled
touch $(GCC_BUILD_DIR2)/.installed
$(STAGING_DIR)/bin/$(ARCH)-uclibc-g++: $(GCC_BUILD_DIR2)/.compiled
PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR2) install;
-mv $(STAGING_DIR)/bin/gcc $(STAGING_DIR)/usr/bin;
-mv $(STAGING_DIR)/bin/protoize $(STAGING_DIR)/usr/bin;
-mv $(STAGING_DIR)/bin/unprotoize $(STAGING_DIR)/usr/bin;
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-cpp $(STAGING_DIR)/bin/$(ARCH)-uclibc-cpp
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-gcc $(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-c++ $(STAGING_DIR)/bin/$(ARCH)-uclibc-c++
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-g++ $(STAGING_DIR)/bin/$(ARCH)-uclibc-g++
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-c++filt $(STAGING_DIR)/bin/$(ARCH)-uclibc-c++filt
rm -f $(STAGING_DIR)/bin/cpp $(STAGING_DIR)/bin/gcov $(STAGING_DIR)/bin/*gccbug
rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc \
$(STAGING_DIR)/share/locale
# Strip the host binaries
-strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/*
set -e; \
for app in cc gcc c89 cpp c++ g++ ; do \
if [ -x $(STAGING_DIR)/bin/$(ARCH)-uclibc-$${app} ] ; then \
(cd $(STAGING_DIR)/usr/bin; \
ln -fs ../../bin/$(ARCH)-uclibc-$${app} $${app}; \
); \
fi; \
done;
gcc_final: $(STAGING_DIR)/.setup binutils gcc_initial uclibc $(STAGING_DIR)/bin/$(ARCH)-uclibc-g++
gcc_final-clean:
rm -rf $(GCC_BUILD_DIR2)
rm -f $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)*
gcc_final-dirclean:
rm -rf $(GCC_BUILD_DIR2)
#############################################################
#
# Packup the toolchain binaries
#
#############################################################
$(ARCH)-uclibc-toolchain.tar.bz2: gcc_final
rm -f $(ARCH)-uclibc-toolchain.tar.bz2
tar -cf $(ARCH)-uclibc-toolchain.tar $(STAGING_DIR)
bzip2 -9 $(ARCH)-uclibc-toolchain.tar
tarball: $(ARCH)-uclibc-toolchain.tar.bz2
endif
endif
