#############################################################
#
# busybox
#
#############################################################
ifeq ($(BR2_PACKAGE_BUSYBOX_SNAPSHOT),y)
BUSYBOX_VERSION = snapshot
BUSYBOX_SITE = http://www.busybox.net/downloads/snapshots
else
BUSYBOX_VERSION = $(call qstrip,$(BR2_BUSYBOX_VERSION))
BUSYBOX_SITE = http://www.busybox.net/downloads
endif
BUSYBOX_SOURCE = busybox-$(BUSYBOX_VERSION).tar.bz2
BUSYBOX_BUILD_CONFIG = $(BUSYBOX_DIR)/.config
# Allows the build system to tweak CFLAGS
BUSYBOX_MAKE_ENV = $(TARGET_MAKE_ENV) CFLAGS="$(TARGET_CFLAGS) -I$(LINUX_HEADERS_DIR)/include"
BUSYBOX_MAKE_OPTS = \
CC="$(TARGET_CC)" \
ARCH=$(KERNEL_ARCH) \
PREFIX="$(TARGET_DIR)" \
EXTRA_LDFLAGS="$(TARGET_LDFLAGS)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
CONFIG_PREFIX="$(TARGET_DIR)" \
SKIP_STRIP=y
ifndef BUSYBOX_CONFIG_FILE
BUSYBOX_CONFIG_FILE = $(call qstrip,$(BR2_PACKAGE_BUSYBOX_CONFIG))
endif
# If mdev will be used for device creation enable it and copy S10mdev to /etc/init.d
ifeq ($(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV),y)
define BUSYBOX_INSTALL_MDEV_SCRIPT
install -m 0755 package/busybox/S10mdev $(TARGET_DIR)/etc/init.d
endef
define BUSYBOX_SET_MDEV
$(call KCONFIG_ENABLE_OPT,CONFIG_MDEV,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_MDEV_CONF,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_MDEV_EXEC,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_MDEV_LOAD_FIRMWARE,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# If we have external syslogd, force busybox to use it
ifeq ($(BR2_PACKAGE_SYSKLOGD),y)
define BUSYBOX_SET_SYSKLOGD
@$(SED) "/#include.*busybox\.h/a#define CONFIG_SYSLOGD" \
$(BUSYBOX_DIR)/init/init.c
endef
endif
# id applet breaks on >=1.13.0 with old uclibc unless the bb pwd routines are used
ifeq ($(BR2_BUSYBOX_VERSION_1_13_X)$(BR2_BUSYBOX_VERSION_1_14_X)$(BR2_UCLIBC_VERSION_0_9_29),yy)
define BUSYBOX_SET_BB_PWD
if grep -q 'CONFIG_ID=y' $(BUSYBOX_BUILD_CONFIG); \
then \
echo 'warning: CONFIG_ID needs BB_PWD_GRP with old uclibc, enabling' >&2;\
$(SED) "s/^.*CONFIG_USE_BB_PWD_GRP.*/CONFIG_USE_BB_PWD_GRP=y/;" $(BUSYBOX_BUILD_CONFIG); \
fi
endef
endif
ifeq ($(BR2_LARGEFILE),y)
define BUSYBOX_SET_LARGEFILE
$(call KCONFIG_ENABLE_OPT,CONFIG_LFS,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FDISK_SUPPORT_LARGE_DISKS,$(BUSYBOX_BUILD_CONFIG))
endef
else
define BUSYBOX_SET_LARGEFILE
$(call KCONFIG_DISABLE_OPT,CONFIG_LFS,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_DISABLE_OPT,CONFIG_FDISK_SUPPORT_LARGE_DISKS,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# If IPv6 is enabled then enable basic ifupdown support for it
ifeq ($(BR2_INET_IPV6),y)
define BUSYBOX_SET_IPV6
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_IPV6,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_IFUPDOWN_IPV6,$(BUSYBOX_BUILD_CONFIG))
endef
else
define BUSYBOX_SET_IPV6
$(call KCONFIG_DISABLE_OPT,CONFIG_FEATURE_IPV6,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_DISABLE_OPT,CONFIG_FEATURE_IFUPDOWN_IPV6,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# If RPC is enabled then enable nfs mounts
ifeq ($(BR2_INET_RPC),y)
define BUSYBOX_SET_RPC
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_MOUNT_NFS,$(BUSYBOX_BUILD_CONFIG))
endef
else
define BUSYBOX_SET_RPC
$(call KCONFIG_DISABLE_OPT,CONFIG_FEATURE_MOUNT_NFS,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# If we're using static libs do the same for busybox
ifeq ($(BR2_PREFER_STATIC_LIB),y)
define BUSYBOX_PREFER_STATIC
$(call KCONFIG_ENABLE_OPT,CONFIG_STATIC,$(BUSYBOX_BUILD_CONFIG))
endef
else
define BUSYBOX_PREFER_STATIC
$(call KCONFIG_DISABLE_OPT,CONFIG_STATIC,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# Disable usage of inetd if netkit-base package is selected
ifeq ($(BR2_PACKAGE_NETKITBASE),y)
define BUSYBOX_NETKITBASE
$(call KCONFIG_DISABLE_OPT,CONFIG_INETD,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# Disable usage of telnetd if netkit-telnetd package is selected
ifeq ($(BR2_PACKAGE_NETKITTELNET),y)
define BUSYBOX_NETKITTELNET
$(call KCONFIG_DISABLE_OPT,CONFIG_TELNETD,$(BUSYBOX_BUILD_CONFIG))
endef
endif
define BUSYBOX_COPY_CONFIG
cp -f $(BUSYBOX_CONFIG_FILE) $(BUSYBOX_BUILD_CONFIG)
endef
# We do this here to avoid busting a modified .config in configure
BUSYBOX_POST_EXTRACT_HOOKS += BUSYBOX_COPY_CONFIG
define BUSYBOX_CONFIGURE_CMDS
$(BUSYBOX_SET_SYSKLOGD)
$(BUSYBOX_SET_BB_PWD)
$(BUSYBOX_SET_LARGEFILE)
$(BUSYBOX_SET_IPV6)
$(BUSYBOX_SET_RPC)
$(BUSYBOX_PREFER_STATIC)
$(BUSYBOX_SET_MDEV)
$(BUSYBOX_NETKITBASE)
$(BUSYBOX_NETKITTELNET)
@yes "" | $(MAKE) ARCH=$(KERNEL_ARCH) CROSS_COMPILE="$(TARGET_CROSS)" \
-C $(@D) oldconfig
endef
define BUSYBOX_BUILD_CMDS
$(BUSYBOX_MAKE_ENV) $(MAKE) $(BUSYBOX_MAKE_OPTS) -C $(@D)
endef
define BUSYBOX_INSTALL_TARGET_CMDS
$(BUSYBOX_MAKE_ENV) $(MAKE) $(BUSYBOX_MAKE_OPTS) -C $(@D) install
if [ ! -f $(TARGET_DIR)/usr/share/udhcpc/default.script ]; then \
$(INSTALL) -m 0755 -D package/busybox/udhcpc.script \
$(TARGET_DIR)/usr/share/udhcpc/default.script; \
fi
$(BUSYBOX_INSTALL_MDEV_SCRIPT)
endef
define BUSYBOX_UNINSTALL_TARGET_CMDS
$(BUSYBOX_MAKE_ENV) $(MAKE) $(BUSYBOX_MAKE_OPTS) -C $(@D) uninstall
endef
define BUSYBOX_CLEAN_CMDS
$(BUSYBOX_MAKE_ENV) $(MAKE) $(BUSYBOX_MAKE_OPTS) -C $(@D) clean
endef
$(eval $(call GENTARGETS,package,busybox))
busybox-menuconfig: busybox-patch
$(BUSYBOX_MAKE_ENV) $(MAKE) $(BUSYBOX_MAKE_OPTS) -C $(BUSYBOX_DIR) menuconfig
rm -f $(BUSYBOX_DIR)/.stamp_built
rm -f $(BUSYBOX_DIR)/.stamp_target_installed
busybox-update:
cp -f $(BUSYBOX_BUILD_CONFIG) $(BUSYBOX_CONFIG_FILE)
