summaryrefslogtreecommitdiffstats
path: root/target/device/Atmel/atstk1002/kernel-patches/linux-2.6.24-600-avr32-mmc.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/device/Atmel/atstk1002/kernel-patches/linux-2.6.24-600-avr32-mmc.patch')
-rw-r--r--target/device/Atmel/atstk1002/kernel-patches/linux-2.6.24-600-avr32-mmc.patch255
1 files changed, 0 insertions, 255 deletions
diff --git a/target/device/Atmel/atstk1002/kernel-patches/linux-2.6.24-600-avr32-mmc.patch b/target/device/Atmel/atstk1002/kernel-patches/linux-2.6.24-600-avr32-mmc.patch
deleted file mode 100644
index a7654b5c6..000000000
--- a/target/device/Atmel/atstk1002/kernel-patches/linux-2.6.24-600-avr32-mmc.patch
+++ /dev/null
@@ -1,255 +0,0 @@
-diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
-index eeac479..7913cd8 100644
---- a/drivers/mmc/host/atmel-mci.c
-+++ b/drivers/mmc/host/atmel-mci.c
-@@ -39,7 +39,6 @@ enum {
- EVENT_STOP_COMPLETE,
- EVENT_DMA_COMPLETE,
- EVENT_DMA_ERROR,
-- EVENT_CARD_DETECT,
- };
-
- struct atmel_mci_dma {
-@@ -70,6 +69,9 @@ struct atmel_mci {
- int detect_pin;
- int wp_pin;
-
-+ /* For detect pin debouncing */
-+ struct timer_list detect_timer;
-+
- unsigned long bus_hz;
- unsigned long mapbase;
- struct clk *mck;
-@@ -108,8 +110,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
- test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
- #define mci_dma_error_is_complete(host) \
- test_bit(EVENT_DMA_ERROR, &host->completed_events)
--#define mci_card_detect_is_complete(host) \
-- test_bit(EVENT_CARD_DETECT, &host->completed_events)
-
- /* Test and clear bit macros for pending events */
- #define mci_clear_cmd_is_pending(host) \
-@@ -124,8 +124,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
- test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
- #define mci_clear_dma_error_is_pending(host) \
- test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
--#define mci_clear_card_detect_is_pending(host) \
-- test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
-
- /* Test and set bit macros for completed events */
- #define mci_set_cmd_is_completed(host) \
-@@ -140,8 +138,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
- test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
- #define mci_set_dma_error_is_completed(host) \
- test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
--#define mci_set_card_detect_is_completed(host) \
-- test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
-
- /* Set bit macros for completed events */
- #define mci_set_cmd_complete(host) \
-@@ -158,8 +154,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
- set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
- #define mci_set_dma_error_complete(host) \
- set_bit(EVENT_DMA_ERROR, &host->completed_events)
--#define mci_set_card_detect_complete(host) \
-- set_bit(EVENT_CARD_DETECT, &host->completed_events)
-
- /* Set bit macros for pending events */
- #define mci_set_cmd_pending(host) \
-@@ -174,8 +168,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
- set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
- #define mci_set_dma_error_pending(host) \
- set_bit(EVENT_DMA_ERROR, &host->pending_events)
--#define mci_set_card_detect_pending(host) \
-- set_bit(EVENT_CARD_DETECT, &host->pending_events)
-
- /* Clear bit macros for pending events */
- #define mci_clear_cmd_pending(host) \
-@@ -190,8 +182,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
- clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
- #define mci_clear_dma_error_pending(host) \
- clear_bit(EVENT_DMA_ERROR, &host->pending_events)
--#define mci_clear_card_detect_pending(host) \
-- clear_bit(EVENT_CARD_DETECT, &host->pending_events)
-
-
- #ifdef CONFIG_DEBUG_FS
-@@ -560,6 +550,21 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
- mci_readl(host, IMR));
-
- WARN_ON(host->mrq != NULL);
-+
-+ /*
-+ * We may "know" the card is gone even though there's still an
-+ * electrical connection. If so, we really need to communicate
-+ * this to the MMC core since there won't be any more
-+ * interrupts as the card is completely removed. Otherwise,
-+ * the MMC core might believe the card is still there even
-+ * though the card was just removed very slowly.
-+ */
-+ if (!host->present) {
-+ mrq->cmd->error = -ENOMEDIUM;
-+ mmc_request_done(mmc, mrq);
-+ return;
-+ }
-+
- host->mrq = mrq;
- host->pending_events = 0;
- host->completed_events = 0;
-@@ -729,6 +734,61 @@ static void atmci_command_complete(struct atmel_mci *host,
- }
- }
-
-+static void atmci_detect_change(unsigned long data)
-+{
-+ struct atmel_mci *host = (struct atmel_mci *)data;
-+ struct mmc_request *mrq = host->mrq;
-+ int present;
-+
-+ /*
-+ * atmci_remove() sets detect_pin to -1 before freeing the
-+ * interrupt. We must not re-enable the interrupt if it has
-+ * been freed.
-+ */
-+ smp_rmb();
-+ if (host->detect_pin < 0)
-+ return;
-+
-+ enable_irq(gpio_to_irq(host->detect_pin));
-+ present = !gpio_get_value(host->detect_pin);
-+
-+ dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
-+ present, host->present);
-+
-+ if (present != host->present) {
-+ dev_dbg(&host->mmc->class_dev, "card %s\n",
-+ present ? "inserted" : "removed");
-+ host->present = present;
-+
-+ /* Reset controller if card is gone */
-+ if (!present) {
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+ }
-+
-+ /* Clean up queue if present */
-+ if (mrq) {
-+ if (!mci_cmd_is_complete(host))
-+ mrq->cmd->error = -ENOMEDIUM;
-+ if (mrq->data && !mci_data_is_complete(host)
-+ && !mci_data_error_is_complete(host)) {
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+ host->data->error = -ENOMEDIUM;
-+ atmci_data_complete(host, host->data);
-+ }
-+ if (mrq->stop && !mci_stop_is_complete(host))
-+ mrq->stop->error = -ENOMEDIUM;
-+
-+ host->cmd = NULL;
-+ atmci_request_end(host->mmc, mrq);
-+ }
-+
-+ mmc_detect_change(host->mmc, 0);
-+ }
-+}
-+
- static void atmci_tasklet_func(unsigned long priv)
- {
- struct mmc_host *mmc = (struct mmc_host *)priv;
-@@ -806,33 +866,6 @@ static void atmci_tasklet_func(unsigned long priv)
- data->bytes_xfered = data->blocks * data->blksz;
- atmci_data_complete(host, data);
- }
-- if (mci_clear_card_detect_is_pending(host)) {
-- /* Reset controller if card is gone */
-- if (!host->present) {
-- mci_writel(host, CR, MCI_BIT(SWRST));
-- mci_writel(host, IDR, ~0UL);
-- mci_writel(host, CR, MCI_BIT(MCIEN));
-- }
--
-- /* Clean up queue if present */
-- if (mrq) {
-- if (!mci_cmd_is_complete(host))
-- mrq->cmd->error = -ETIMEDOUT;
-- if (mrq->data && !mci_data_is_complete(host)
-- && !mci_data_error_is_complete(host)) {
-- dma_stop_request(host->dma.req.req.dmac,
-- host->dma.req.req.channel);
-- host->data->error = -ETIMEDOUT;
-- atmci_data_complete(host, data);
-- }
-- if (mrq->stop && !mci_stop_is_complete(host))
-- mrq->stop->error = -ETIMEDOUT;
--
-- host->cmd = NULL;
-- atmci_request_end(mmc, mrq);
-- }
-- mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-- }
- }
-
- static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
-@@ -957,20 +990,19 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
- return IRQ_HANDLED;
- }
-
--static irqreturn_t atmci_detect_change(int irq, void *dev_id)
-+static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
- {
- struct mmc_host *mmc = dev_id;
- struct atmel_mci *host = mmc_priv(mmc);
-
-- int present = !gpio_get_value(irq_to_gpio(irq));
-+ /*
-+ * Disable interrupts until the pin has stabilized and check
-+ * the state then. Use mod_timer() since we may be in the
-+ * middle of the timer routine when this interrupt triggers.
-+ */
-+ disable_irq_nosync(irq);
-+ mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
-
-- if (present != host->present) {
-- dev_dbg(&mmc->class_dev, "card %s\n",
-- present ? "inserted" : "removed");
-- host->present = present;
-- mci_set_card_detect_pending(host);
-- tasklet_schedule(&host->tasklet);
-- }
- return IRQ_HANDLED;
- }
-
-@@ -1079,8 +1111,11 @@ static int __devinit atmci_probe(struct platform_device *pdev)
- mmc_add_host(mmc);
-
- if (host->detect_pin >= 0) {
-+ setup_timer(&host->detect_timer, atmci_detect_change,
-+ (unsigned long)host);
-+
- ret = request_irq(gpio_to_irq(host->detect_pin),
-- atmci_detect_change,
-+ atmci_detect_interrupt,
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- DRIVER_NAME, mmc);
- if (ret) {
-@@ -1125,9 +1160,16 @@ static int __devexit atmci_remove(struct platform_device *pdev)
- atmci_cleanup_debugfs(host);
-
- if (host->detect_pin >= 0) {
-- free_irq(gpio_to_irq(host->detect_pin), host->mmc);
-+ int pin = host->detect_pin;
-+
-+ /* Make sure our timer doesn't enable the interrupt */
-+ host->detect_pin = -1;
-+ smp_wmb();
-+
-+ free_irq(gpio_to_irq(pin), host->mmc);
-+ del_timer_sync(&host->detect_timer);
- cancel_delayed_work(&host->mmc->detect);
-- gpio_free(host->detect_pin);
-+ gpio_free(pin);
- }
-
- mmc_remove_host(host->mmc);