blob: 6ae17238e149508e3f29aeddca019e7f90b029b0 (
plain) (
tree)
|
|
#ifndef _LAN78XX_H
#define _LAN78XX_H
/** @file
*
* Microchip LAN78xx USB Ethernet driver
*
*/
FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
#include "smscusb.h"
#include "smsc75xx.h"
/** Hardware configuration register */
#define LAN78XX_HW_CFG 0x0010
#define LAN78XX_HW_CFG_LED1_EN 0x00200000UL /**< LED1 enable */
#define LAN78XX_HW_CFG_LED0_EN 0x00100000UL /**< LED1 enable */
#define LAN78XX_HW_CFG_LRST 0x00000002UL /**< Soft lite reset */
/** Interrupt endpoint control register */
#define LAN78XX_INT_EP_CTL 0x0098
#define LAN78XX_INT_EP_CTL_RDFO_EN 0x00400000UL /**< RX FIFO overflow */
#define LAN78XX_INT_EP_CTL_PHY_EN 0x00020000UL /**< PHY interrupt */
/** Bulk IN delay register */
#define LAN78XX_BULK_IN_DLY 0x0094
#define LAN78XX_BULK_IN_DLY_SET(ticks) ( (ticks) << 0 ) /**< Delay / 16.7ns */
/** EEPROM register base */
#define LAN78XX_E2P_BASE 0x0040
/** USB configuration register 0 */
#define LAN78XX_USB_CFG0 0x0080
#define LAN78XX_USB_CFG0_BIR 0x00000040UL /**< Bulk IN use NAK */
/** Receive filtering engine control register */
#define LAN78XX_RFE_CTL 0x00b0
#define LAN78XX_RFE_CTL_AB 0x00000400UL /**< Accept broadcast */
#define LAN78XX_RFE_CTL_AM 0x00000200UL /**< Accept multicast */
#define LAN78XX_RFE_CTL_AU 0x00000100UL /**< Accept unicast */
/** FIFO controller RX FIFO control register */
#define LAN78XX_FCT_RX_CTL 0x00c0
#define LAN78XX_FCT_RX_CTL_EN 0x80000000UL /**< FCT RX enable */
#define LAN78XX_FCT_RX_CTL_BAD 0x02000000UL /**< Store bad frames */
/** FIFO controller TX FIFO control register */
#define LAN78XX_FCT_TX_CTL 0x00c4
#define LAN78XX_FCT_TX_CTL_EN 0x80000000UL /**< FCT TX enable */
/** MAC receive register */
#define LAN78XX_MAC_RX 0x0104
#define LAN78XX_MAC_RX_MAX_SIZE(mtu) ( (mtu) << 16 ) /**< Max frame size */
#define LAN78XX_MAC_RX_MAX_SIZE_DEFAULT \
LAN78XX_MAC_RX_MAX_SIZE ( ETH_FRAME_LEN + 4 /* VLAN */ + 4 /* CRC */ )
#define LAN78XX_MAC_RX_FCS 0x00000010UL /**< FCS stripping */
#define LAN78XX_MAC_RX_EN 0x00000001UL /**< RX enable */
/** MAC transmit register */
#define LAN78XX_MAC_TX 0x0108
#define LAN78XX_MAC_TX_EN 0x00000001UL /**< TX enable */
/** MAC receive address register base */
#define LAN78XX_RX_ADDR_BASE 0x0118
/** MII register base */
#define LAN78XX_MII_BASE 0x0120
/** PHY interrupt mask MII register */
#define LAN78XX_MII_PHY_INTR_MASK 25
/** PHY interrupt source MII register */
#define LAN78XX_MII_PHY_INTR_SOURCE 26
/** PHY interrupt: global enable */
#define LAN78XX_PHY_INTR_ENABLE 0x8000
/** PHY interrupt: link state change */
#define LAN78XX_PHY_INTR_LINK 0x2000
/** PHY interrupt: auto-negotiation failure */
#define LAN78XX_PHY_INTR_ANEG_ERR 0x0800
/** PHY interrupt: auto-negotiation complete */
#define LAN78XX_PHY_INTR_ANEG_DONE 0x0400
/** MAC address perfect filter register base */
#define LAN78XX_ADDR_FILT_BASE 0x0400
/** OTP register base */
#define LAN78XX_OTP_BASE 0x1000
/** Maximum time to wait for reset (in milliseconds) */
#define LAN78XX_RESET_MAX_WAIT_MS 100
#endif /* _LAN78XX_H */
|
