blob: eef49ec98be171e99f13bff8c85242b8453070c5 (
plain) (
tree)
|
|
#ifndef _RHINE_H
#define _RHINE_H
/** @file
*
* VIA Rhine network driver
*
*/
FILE_LICENCE ( GPL2_OR_LATER );
/** Rhine BAR size */
#define RHINE_BAR_SIZE 256
/** Default timeout */
#define RHINE_TIMEOUT_US 10000
/** Rhine descriptor format */
struct rhine_descriptor {
uint32_t des0;
uint32_t des1;
uint32_t buffer;
uint32_t next;
} __attribute__ (( packed ));
#define RHINE_DES0_OWN (1 << 31) /*< Owned descriptor */
#define RHINE_DES1_IC (1 << 23) /*< Generate interrupt */
#define RHINE_TDES1_EDP (1 << 22) /*< End of packet */
#define RHINE_TDES1_STP (1 << 21) /*< Start of packet */
#define RHINE_TDES1_TCPCK (1 << 20) /*< HW TCP checksum */
#define RHINE_TDES1_UDPCK (1 << 19) /*< HW UDP checksum */
#define RHINE_TDES1_IPCK (1 << 18) /*< HW IP checksum */
#define RHINE_TDES1_TAG (1 << 17) /*< Tagged frame */
#define RHINE_TDES1_CRC (1 << 16) /*< No CRC */
#define RHINE_DES1_CHAIN (1 << 15) /*< Chained descriptor */
#define RHINE_DES1_SIZE(_x) ((_x) & 0x7ff) /*< Frame size */
#define RHINE_DES0_GETSIZE(_x) (((_x) >> 16) & 0x7ff)
#define RHINE_RDES0_RXOK (1 << 15)
#define RHINE_RDES0_VIDHIT (1 << 14)
#define RHINE_RDES0_MAR (1 << 13)
#define RHINE_RDES0_BAR (1 << 12)
#define RHINE_RDES0_PHY (1 << 11)
#define RHINE_RDES0_CHN (1 << 10)
#define RHINE_RDES0_STP (1 << 9)
#define RHINE_RDES0_EDP (1 << 8)
#define RHINE_RDES0_BUFF (1 << 7)
#define RHINE_RDES0_FRAG (1 << 6)
#define RHINE_RDES0_RUNT (1 << 5)
#define RHINE_RDES0_LONG (1 << 4)
#define RHINE_RDES0_FOV (1 << 3)
#define RHINE_RDES0_FAE (1 << 2)
#define RHINE_RDES0_CRCE (1 << 1)
#define RHINE_RDES0_RERR (1 << 0)
#define RHINE_TDES0_TERR (1 << 15)
#define RHINE_TDES0_UDF (1 << 11)
#define RHINE_TDES0_CRS (1 << 10)
#define RHINE_TDES0_OWC (1 << 9)
#define RHINE_TDES0_ABT (1 << 8)
#define RHINE_TDES0_CDH (1 << 7)
#define RHINE_TDES0_COLS (1 << 4)
#define RHINE_TDES0_NCR(_x) ((_x) & 0xf)
#define RHINE_RING_ALIGN 4
/** Rhine descriptor rings sizes */
#define RHINE_RXDESC_NUM 4
#define RHINE_TXDESC_NUM 8
#define RHINE_RX_MAX_LEN 1536
/** Rhine MAC address registers */
#define RHINE_MAC 0x00
/** Receive control register */
#define RHINE_RCR 0x06
#define RHINE_RCR_FIFO_TRSH(_x) (((_x) & 0x7) << 5) /*< RX FIFO threshold */
#define RHINE_RCR_PHYS_ACCEPT (1 << 4) /*< Accept matching PA */
#define RHINE_RCR_BCAST_ACCEPT (1 << 3) /*< Accept broadcast */
#define RHINE_RCR_MCAST_ACCEPT (1 << 2) /*< Accept multicast */
#define RHINE_RCR_RUNT_ACCEPT (1 << 1) /*< Accept runt frames */
#define RHINE_RCR_ERR_ACCEPT (1 << 0) /*< Accept erroneous frames */
/** Transmit control register */
#define RHINE_TCR 0x07
#define RHINE_TCR_LOOPBACK(_x) (((_x) & 0x3) << 1) /*< Transmit loop mode */
#define RHINE_TCR_TAGGING (1 << 0) /*< 802.1P/Q packet tagging */
/** Command 0 register */
#define RHINE_CR0 0x08
#define RHINE_CR0_RXSTART (1 << 6)
#define RHINE_CR0_TXSTART (1 << 5)
#define RHINE_CR0_TXEN (1 << 4) /*< Transmit enable */
#define RHINE_CR0_RXEN (1 << 3) /*< Receive enable */
#define RHINE_CR0_STOPNIC (1 << 2) /*< Stop NIC */
#define RHINE_CR0_STARTNIC (1 << 1) /*< Start NIC */
/** Command 1 register */
#define RHINE_CR1 0x09
#define RHINE_CR1_RESET (1 << 7) /*< Software reset */
#define RHINE_CR1_RXPOLL (1 << 6) /*< Receive poll demand */
#define RHINE_CR1_TXPOLL (1 << 5) /*< Xmit poll demand */
#define RHINE_CR1_AUTOPOLL (1 << 3) /*< Disable autopoll */
#define RHINE_CR1_FDX (1 << 2) /*< Full duplex */
#define RIHNE_CR1_ACCUNI (1 << 1) /*< Disable accept unicast */
/** Transmit queue wake register */
#define RHINE_TXQUEUE_WAKE 0x0a
/** Interrupt service 0 */
#define RHINE_ISR0 0x0c
#define RHINE_ISR0_MIBOVFL (1 << 7)
#define RHINE_ISR0_PCIERR (1 << 6)
#define RHINE_ISR0_RXRINGERR (1 << 5)
#define RHINE_ISR0_TXRINGERR (1 << 4)
#define RHINE_ISR0_TXERR (1 << 3)
#define RHINE_ISR0_RXERR (1 << 2)
#define RHINE_ISR0_TXDONE (1 << 1)
#define RHINE_ISR0_RXDONE (1 << 0)
/** Interrupt service 1 */
#define RHINE_ISR1 0x0d
#define RHINE_ISR1_GPI (1 << 7)
#define RHINE_ISR1_PORTSTATE (1 << 6)
#define RHINE_ISR1_TXABORT (1 << 5)
#define RHINE_ISR1_RXNOBUF (1 << 4)
#define RHINE_ISR1_RXFIFOOVFL (1 << 3)
#define RHINE_ISR1_RXFIFOUNFL (1 << 2)
#define RHINE_ISR1_TXFIFOUNFL (1 << 1)
#define RHINE_ISR1_EARLYRX (1 << 0)
/** Interrupt enable mask register 0 */
#define RHINE_IMR0 0x0e
/** Interrupt enable mask register 1 */
#define RHINE_IMR1 0x0f
/** RX queue descriptor base address */
#define RHINE_RXQUEUE_BASE 0x18
/** TX queue 0 descriptor base address */
#define RHINE_TXQUEUE_BASE 0x1c
/** MII configuration */
#define RHINE_MII_CFG 0x6c
/** MII status register */
#define RHINE_MII_SR 0x6d
#define RHINE_MII_SR_PHYRST (1 << 7) /*< PHY reset */
#define RHINE_MII_SR_LINKNWAY (1 << 4) /*< Link status after N-Way */
#define RHINE_MII_SR_PHYERR (1 << 3) /*< PHY device error */
#define RHINE_MII_SR_DUPLEX (1 << 2) /*< Duplex mode after N-Way */
#define RHINE_MII_SR_LINKPOLL (1 << 1) /*< Link status after poll */
#define RHINE_MII_SR_LINKSPD (1 << 0) /*< Link speed after N-Way */
/** MII bus control 0 register */
#define RHINE_MII_BCR0 0x6e
/** MII bus control 1 register */
#define RHINE_MII_BCR1 0x6f
/** MII control register */
#define RHINE_MII_CR 0x70
#define RHINE_MII_CR_AUTOPOLL (1 << 7) /*< MII auto polling */
#define RHINE_MII_CR_RDEN (1 << 6) /*< PHY read enable */
#define RHINE_MII_CR_WREN (1 << 5) /*< PHY write enable */
#define RHINE_MII_CR_DIRECT (1 << 4) /*< Direct programming mode */
#define RHINE_MII_CR_MDIOOUT (1 << 3) /*< MDIO output enable */
/** MII port address */
#define RHINE_MII_ADDR 0x71
#define RHINE_MII_ADDR_MSRCEN (1 << 6)
#define RHINE_MII_ADDR_MDONE (1 << 5)
/** MII read/write data */
#define RHINE_MII_RDWR 0x72
/** EERPOM control/status register */
#define RHINE_EEPROM_CTRL 0x74
#define RHINE_EEPROM_CTRL_STATUS (1 << 7) /*< EEPROM status */
#define RHINE_EEPROM_CTRL_RELOAD (1 << 5) /*< EEPROM reload */
/** Chip configuration A */
#define RHINE_CHIPCFG_A 0x78
/* MMIO enable. Only valid for Rhine I. Reserved on later boards */
#define RHINE_CHIPCFG_A_MMIO (1 << 5)
/** Chip configuration B */
#define RHINE_CHIPCFG_B 0x79
/** Chip configuation C */
#define RHINE_CHIPCFG_C 0x7a
/** Chip configuration D */
#define RHINE_CHIPCFG_D 0x7b
/* MMIO enable. Only valid on Rhine II and later. GPIOEN on Rhine I */
#define RHINE_CHIPCFG_D_MMIO (1 << 7)
#define RHINE_REVISION_OLD 0x20
/** A VIA Rhine descriptor ring */
struct rhine_ring {
/** Descriptors */
struct rhine_descriptor *desc;
/** Producer index */
unsigned int prod;
/** Consumer index */
unsigned int cons;
/** Number of descriptors */
unsigned int count;
/** Register address */
unsigned int reg;
};
/**
* Initialise descriptor ring
*
* @v ring Descriptor ring
* @v count Number of descriptors (must be a power of 2)
* @v reg Register address
*/
static inline __attribute__ (( always_inline)) void
rhine_init_ring ( struct rhine_ring *ring, unsigned int count,
unsigned int reg ) {
ring->count = count;
ring->reg = reg;
}
/** A VIA Rhine network card */
struct rhine_nic {
/** I/O address (some PIO access is always required) */
unsigned long ioaddr;
/** Registers */
void *regs;
/** Cached value of CR1 (to avoid read-modify-write on fast path) */
uint8_t cr1;
/** MII interface */
struct mii_interface mdio;
/** MII device */
struct mii_device mii;
/** Transmit descriptor ring */
struct rhine_ring tx;
/** Receive descriptor ring */
struct rhine_ring rx;
/** Receive I/O buffers */
struct io_buffer *rx_iobuf[RHINE_RXDESC_NUM];
};
#endif /* _RHINE_H */
|
