[myri10ge] Add NonVolatile Option (nvo) support

Add NonVolatile Option (nvo) and NonVolatile Storage (nvs) support to
the myri10ge driver using the EEPROM read/write mechanism provided by
the NIC's Vendor Specific PCI capability.

The myri10ge NIC is capabile of storing 64KB or more of nonvolatile
options, but this patch advertises only 512 bytes of nvo storage
because iPXE malloc's a buffer matching the total size we advertise.
512 is plenty without wasting malloc'd memory.  (The 2 other drivers
currently supporting nvo advertise 256 bytes or less.)

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>

1 files changed, 314 insertions, 11 deletions

diff --git a/src/drivers/net/myri10ge.c b/src/drivers/net/myri10ge.c
index 2237c484..cea2758f 100644
--- a/src/drivers/net/myri10ge.c
+++ b/src/drivers/net/myri10ge.c
@@ -55,6 +55,12 @@ FILE_LICENCE ( GPL2_ONLY );
  * myri10ge_net_poll() polls for these receive notifications, posts
  * replacement receive buffers to the NIC, and passes received frames
  * to netdev_rx().
+ *
+ * NonVolatile Storage
+ *
+ * This driver supports NonVolatile Storage (nvs) in the NIC EEPROM.
+ * If the last EEPROM block is not otherwise filled, we tell
+ * iPXE it may store NonVolatile Options (nvo) there.
  */
 
 /*
@@ -75,6 +81,8 @@ FILE_LICENCE ( GPL2_ONLY );
 #include <ipxe/iobuf.h>
 #include <ipxe/malloc.h>
 #include <ipxe/netdevice.h>
+#include <ipxe/nvo.h>
+#include <ipxe/nvs.h>
 #include <ipxe/pci.h>
 #include <ipxe/timer.h>
 
@@ -169,6 +177,18 @@ struct myri10ge_private
 	   BEWARE: the value must be written 32 bits at a time. */
 
 	mcp_cmd_t	*command;
+
+	/*
+	 * Nonvolatile Storage for configuration options.
+	 */
+
+	struct nvs_device	nvs;
+	struct nvo_fragment	nvo_fragment[2];
+	struct nvo_block	nvo;
+
+	/* Cached PCI capability locations. */
+
+	uint8			pci_cap_vs;
 };
 
 /****************************************************************
@@ -199,6 +219,28 @@ static inline struct myri10ge_private *myri10ge_priv ( struct net_device *nd )
 }
 
 /*
+ * Convert a Myri10ge driver private data pointer to a netdev pointer.
+ *
+ * @v p		Myri10ge device private data.
+ * @ret r	The corresponding network device.
+ */
+static inline struct net_device *myri10ge_netdev ( struct myri10ge_private *p )
+{
+	return ( ( struct net_device * ) p ) - 1;
+}
+
+/*
+ * Convert a network device pointer to a PCI device pointer.
+ *
+ * @v netdev	A Network Device.
+ * @ret r	The corresponding PCI device.
+ */
+static inline struct pci_device *myri10ge_pcidev ( struct net_device *netdev )
+{
+	return container_of (netdev->dev, struct pci_device, dev);
+}
+
+/*
  * Pass a receive buffer to the NIC to be filled.
  *
  * @v priv	The network device to receive the buffer.
@@ -381,12 +423,16 @@ static void myri10ge_interrupt_handler ( struct net_device *netdev )
 /* Constants for reading the STRING_SPECS via the Myricom
    Vendor Specific PCI configuration space capability. */
 
+#define VS_EEPROM_READ_ADDR ( vs + 0x04 )
+#define VS_EEPROM_READ_DATA ( vs + 0x08 )
+#define VS_EEPROM_WRITE     ( vs + 0x0C )
 #define VS_ADDR ( vs + 0x18 )
 #define VS_DATA ( vs + 0x14 )
 #define VS_MODE ( vs + 0x10 )
 #define 	VS_MODE_READ32 0x3
 #define 	VS_MODE_LOCATE 0x8
 #define 		VS_LOCATE_STRING_SPECS 0x3
+#define		VS_MODE_EEPROM_STREAM_WRITE 0xB
 
 /*
  * Read MAC address from its 'string specs' via the vendor-specific
@@ -394,28 +440,21 @@ static void myri10ge_interrupt_handler ( struct net_device *netdev )
  * before it is mapped.)
  *
  * @v pci		The device.
+ * @v vs		Offset of the PCI Vendor-Specific Capability.
  * @v mac		Buffer to store the MAC address.
  * @ret rc		Returns 0 on success, else an error code.
  */
 static int mac_address_from_string_specs ( struct pci_device *pci,
-						   uint8 mac[ETH_ALEN] )
+					   unsigned int vs,
+					   uint8 mac[ETH_ALEN] )
 {
 	char string_specs[256];
 	char *ptr, *limit;
 	char *to = string_specs;
 	uint32 addr;
 	uint32 len;
-	unsigned int vs;
 	int mac_set = 0;
 
-	/* Find the "vendor specific" capability. */
-
-	vs = pci_find_capability ( pci, 9 );
-	if ( vs == 0 ) {
-		DBG ( "no VS\n" );
-		return -ENOTSUP;
-	}
-
 	/* Locate the String specs in LANai SRAM. */
 
 	pci_write_config_byte ( pci, VS_MODE, VS_MODE_LOCATE );
@@ -427,6 +466,7 @@ static int mac_address_from_string_specs ( struct pci_device *pci,
 	/* Copy in the string specs.  Use 32-bit reads for performance. */
 
 	if ( len > sizeof ( string_specs ) || ( len & 3 ) ) {
+		pci_write_config_byte ( pci, VS_MODE, 0 );
 		DBG ( "SS too big\n" );
 		return -ENOTSUP;
 	}
@@ -484,6 +524,247 @@ static int mac_address_from_string_specs ( struct pci_device *pci,
 }
 
 /****************************************************************
+ * NonVolatile Storage support
+ ****************************************************************/
+
+/*
+ * Fill a buffer with data read from nonvolatile storage.
+ *
+ * @v nvs	The NonVolatile Storage device to be read.
+ * @v addr      The first NonVolatile Storage address to be read.
+ * @v _buf	Pointer to the data buffer to be filled.
+ * @v len	The number of bytes to copy.
+ * @ret rc	0 on success, else nonzero.
+ */
+static int myri10ge_nvs_read ( struct nvs_device *nvs,
+			       unsigned int addr,
+			       void *_buf,
+			       size_t len )
+{
+	struct myri10ge_private *priv =
+		container_of (nvs, struct myri10ge_private, nvs);
+	struct pci_device *pci = myri10ge_pcidev ( myri10ge_netdev ( priv ) );
+	unsigned int vs = priv->pci_cap_vs;
+	unsigned char *buf = (unsigned char *) _buf;
+	unsigned int data;
+	unsigned int i, j;
+
+	DBGP ( "myri10ge_nvs_read\n" );
+
+	/* Issue the first read address. */
+
+	pci_write_config_byte ( pci, VS_EEPROM_READ_ADDR + 3, addr>>16 );
+	pci_write_config_byte ( pci, VS_EEPROM_READ_ADDR + 2, addr>>8 );
+	pci_write_config_byte ( pci, VS_EEPROM_READ_ADDR + 1, addr );
+	addr++;
+
+	/* Issue all the reads, and harvest the results every 4th issue. */
+
+	for ( i=0; i<len; ++i,addr++ ) {
+
+		/* Issue the next read address, updating only the
+		   bytes that need updating.  We always update the
+		   LSB, which triggers the read. */
+
+		if ( ( addr & 0xff ) == 0 ) {
+			if ( ( addr & 0xffff ) == 0 ) {
+				pci_write_config_byte ( pci,
+							VS_EEPROM_READ_ADDR + 3,
+							addr >> 16 );
+			}
+			pci_write_config_byte ( pci,
+					        VS_EEPROM_READ_ADDR + 2,
+						addr >> 8 );
+		}
+		pci_write_config_byte ( pci, VS_EEPROM_READ_ADDR + 1, addr );
+
+		/* If 4 data bytes are available, read them with a single read. */
+
+		if ( ( i & 3 ) == 3 ) {
+			pci_read_config_dword ( pci,
+						VS_EEPROM_READ_DATA,
+						&data );
+			for ( j=0; j<4; j++ ) {
+				buf[i-j] = data;
+				data >>= 8;
+			}
+		}
+	}
+
+	/* Harvest any remaining results. */
+
+	if ( ( i & 3 ) != 0 ) {
+		pci_read_config_dword ( pci, VS_EEPROM_READ_DATA, &data );
+		for ( j=1; j<=(i&3); j++ ) {
+			buf[i-j] = data;
+			data >>= 8;
+		}
+	}
+
+	DBGP_HDA ( addr - len, _buf, len );
+	return 0;
+}
+
+/*
+ * Write a buffer into nonvolatile storage.
+ *
+ * @v nvs	The NonVolatile Storage device to be written.
+ * @v address   The NonVolatile Storage address to be written.
+ * @v _buf	Pointer to the data to be written.
+ * @v len	Length of the buffer to be written.
+ * @ret rc	0 on success, else nonzero.
+ */
+static int myri10ge_nvs_write ( struct nvs_device *nvs,
+				unsigned int addr,
+				const void *_buf,
+				size_t len )
+{
+	struct myri10ge_private *priv =
+		container_of (nvs, struct myri10ge_private, nvs);
+	struct pci_device *pci = myri10ge_pcidev ( myri10ge_netdev ( priv ) );
+	unsigned int vs = priv->pci_cap_vs;
+	const unsigned char *buf = (const unsigned char *)_buf;
+	unsigned int i;
+	uint8 verify;
+
+	DBGP ( "nvs_write " );
+	DBGP_HDA ( addr, _buf, len );
+
+	/* Start erase of the NonVolatile Options block. */
+
+	DBGP ( "erasing " );
+	pci_write_config_dword ( pci, VS_EEPROM_WRITE, ( addr << 8 ) | 0xff );
+
+	/* Wait for erase to complete. */
+
+	DBGP ( "waiting " );
+	pci_read_config_byte ( pci, VS_EEPROM_READ_DATA, &verify );
+	while ( verify != 0xff ) {
+		pci_write_config_byte ( pci, VS_EEPROM_READ_ADDR + 1, addr );
+		pci_read_config_byte ( pci, VS_EEPROM_READ_DATA, &verify );
+	}
+
+	/* Write the data one byte at a time. */
+
+	DBGP ( "writing " );
+	pci_write_config_byte ( pci, VS_MODE, VS_MODE_EEPROM_STREAM_WRITE );
+	pci_write_config_dword ( pci, VS_ADDR, addr );
+	for (i=0; i<len; i++, addr++)
+		pci_write_config_byte ( pci, VS_DATA, buf[i] );
+	pci_write_config_dword ( pci, VS_ADDR, 0xffffffff );
+	pci_write_config_byte ( pci, VS_MODE, 0 );
+
+	DBGP ( "done\n" );
+	return 0;
+}
+
+/*
+ * Initialize NonVolatile storage support for a device.
+ *
+ * @v priv	Device private data for the device.
+ * @ret rc	0 on success, else an error code.
+ */
+
+static int myri10ge_nv_init ( struct myri10ge_private *priv )
+{
+	int rc;
+	struct myri10ge_eeprom_header
+	{
+		uint8 __jump[8];
+		uint32 eeprom_len;
+		uint32 eeprom_segment_len;
+		uint32 mcp1_offset;
+		uint32 mcp2_offset;
+		uint32 version;
+	} hdr;
+	uint32 mcp2_len;
+	unsigned int nvo_fragment_pos;
+
+	DBGP ( "myri10ge_nv_init\n" );
+
+	/* Read the EEPROM header, and byteswap the fields we will use.
+	   This is safe even though priv->nvs is not yet initialized. */
+
+	rc = myri10ge_nvs_read ( &priv->nvs, 0, &hdr, sizeof ( hdr ) );
+	if ( rc ) {
+		DBG ( "EEPROM header unreadable\n" );
+		return rc;
+	}
+	hdr.eeprom_len	       = ntohl ( hdr.eeprom_len );
+	hdr.eeprom_segment_len = ntohl ( hdr.eeprom_segment_len );
+	hdr.mcp2_offset	       = ntohl ( hdr.mcp2_offset );
+	hdr.version	       = ntohl ( hdr.version );
+	DBG2 ( "eelen:%xh seglen:%xh mcp2@%xh ver%d\n", hdr.eeprom_len,
+	       hdr.eeprom_segment_len, hdr.mcp2_offset, hdr.version );
+
+	/* If the firmware does not support EEPROM writes, simply return. */
+
+	if ( hdr.version < 1 ) {
+		DBG ( "No EEPROM write support\n" );
+		return 0;
+	}
+
+	/* Read the length of MCP2. */
+
+	rc = myri10ge_nvs_read ( &priv->nvs, hdr.mcp2_offset, &mcp2_len, 4 );
+	mcp2_len = ntohl ( mcp2_len );
+	DBG2 ( "mcp2len:%xh\n", mcp2_len );
+
+	/* Determine the position of the NonVolatile Options fragment and
+	   simply return if it overlaps other data. */
+
+	nvo_fragment_pos = hdr.eeprom_len -  hdr.eeprom_segment_len;
+	if ( hdr.mcp2_offset + mcp2_len > nvo_fragment_pos ) {
+		DBG ( "EEPROM full\n" );
+		return 0;
+	}
+
+	/* Initilize NonVolatile Storage state. */
+
+	priv->nvs.word_len_log2 = 0;
+	priv->nvs.size		= hdr.eeprom_len;
+	priv->nvs.block_size	= hdr.eeprom_segment_len;
+	priv->nvs.read		= myri10ge_nvs_read;
+	priv->nvs.write		= myri10ge_nvs_write;
+
+	/* Build the NonVolatile storage fragment list.  We would like
+	   to use the whole last EEPROM block for this, but we must
+	   reduce the block size lest malloc fail in
+	   src/core/nvo.o. */
+
+	priv->nvo_fragment[0].address = nvo_fragment_pos;
+	priv->nvo_fragment[0].len     = 0x200;
+
+	/* Register the NonVolatile Options storage. */
+
+	nvo_init ( &priv->nvo,
+		   &priv->nvs,
+		   priv->nvo_fragment,
+		   & myri10ge_netdev (priv) -> refcnt );
+	rc = register_nvo ( &priv->nvo,
+			    netdev_settings ( myri10ge_netdev ( priv ) ) );
+	if ( rc ) {
+		DBG ("register_nvo failed");
+		priv->nvo_fragment[0].len = 0;
+		return rc;
+	}
+
+	DBG2 ( "NVO supported\n" );
+	return 0;
+}
+
+void
+myri10ge_nv_fini ( struct myri10ge_private *priv )
+{
+	/* Simply return if nonvolatile access is not supported. */
+
+	if ( 0 == priv->nvo_fragment[0].len )
+		return;
+
+	unregister_nvo ( &priv->nvo );
+}
+
+/****************************************************************
  * iPXE PCI Device Driver API functions
  ****************************************************************/
 
@@ -532,9 +813,20 @@ static int myri10ge_pci_probe ( struct pci_device *pci,
 
 	myri10ge_net_irq ( netdev, 0 );
 
+	/* Find the PCI Vendor-Specific capability. */
+
+	priv->pci_cap_vs = pci_find_capability ( pci , PCI_CAP_ID_VNDR );
+	if ( 0 == priv->pci_cap_vs ) {
+		rc = -ENOTSUP;
+		dbg = "no_vs";
+		goto abort_with_netdev_init;
+	}
+
 	/* Read the NIC HW address. */
 
-	rc = mac_address_from_string_specs ( pci, netdev->hw_addr );
+	rc = mac_address_from_string_specs ( pci,
+					     priv->pci_cap_vs,
+					     netdev->hw_addr );
 	if ( rc ) {
 		dbg = "mac_from_ss";
 		goto abort_with_netdev_init;
@@ -554,10 +846,20 @@ static int myri10ge_pci_probe ( struct pci_device *pci,
 		goto abort_with_netdev_init;
 	}
 
+	/* Initialize NonVolatile Storage support. */
+
+	rc = myri10ge_nv_init ( priv );
+	if ( rc ) {
+		dbg = "myri10ge_nv_init";
+		goto abort_with_registered_netdev;
+	}
+
 	DBGP ( "done\n" );
 
 	return 0;
 
+abort_with_registered_netdev:
+	unregister_netdev ( netdev );
 abort_with_netdev_init:
 	netdev_nullify ( netdev );
 	netdev_put ( netdev );
@@ -580,6 +882,7 @@ static void myri10ge_pci_remove ( struct pci_device *pci )
 	DBGP ( "myri10ge_pci_remove\n" );
 	netdev = pci_get_drvdata ( pci );
 
+	myri10ge_nv_fini ( myri10ge_priv ( netdev ) );
 	unregister_netdev ( netdev );
 	netdev_nullify ( netdev );
 	netdev_put ( netdev );