Initial revision

1 files changed, 205 insertions, 0 deletions

diff --git a/src/drivers/net/smc9000.h b/src/drivers/net/smc9000.h
new file mode 100644
index 00000000..ac7f9163
--- /dev/null
+++ b/src/drivers/net/smc9000.h
@@ -0,0 +1,205 @@
+/*------------------------------------------------------------------------
+ * smc9000.h
+ *
+ * Copyright (C) 1998 by Daniel Engström
+ * Copyright (C) 1996 by Erik Stahlman
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU Public License, incorporated herein by reference.
+ *
+ * This file contains register information and access macros for
+ * the SMC91xxx chipset.
+ *
+ * Information contained in this file was obtained from the SMC91C94
+ * manual from SMC.  To get a copy, if you really want one, you can find
+ * information under www.smsc.com in the components division.
+ * ( this thanks to advice from Donald Becker ).
+ *
+ * Authors
+ *      Daniel Engström                         <daniel.engstrom@riksnett.no>
+ *	Erik Stahlman				<erik@vt.edu>
+ *
+ * History
+ * 96-01-06		 Erik Stahlman   moved definitions here from main .c
+ *                                       file
+ * 96-01-19		 Erik Stahlman	 polished this up some, and added
+ *                                       better error handling
+ * 98-09-25              Daniel Engström adjusted for Etherboot
+ * 98-09-27              Daniel Engström moved some static strings back to the
+ *                                       main .c file
+ * --------------------------------------------------------------------------*/
+#ifndef	_SMC9000_H_
+# define _SMC9000_H_
+
+/* I want some simple types */
+typedef unsigned char			byte;
+typedef unsigned short			word;
+typedef unsigned long int		dword;
+
+/*---------------------------------------------------------------
+ *
+ * A description of the SMC registers is probably in order here,
+ * although for details, the SMC datasheet is invaluable.
+ *
+ * Basically, the chip has 4 banks of registers ( 0 to 3 ), which
+ * are accessed by writing a number into the BANK_SELECT register
+ * ( I also use a SMC_SELECT_BANK macro for this ).
+ *
+ * The banks are configured so that for most purposes, bank 2 is all
+ * that is needed for simple run time tasks.
+ * ----------------------------------------------------------------------*/
+
+/*
+ * Bank Select Register:
+ *
+ *		yyyy yyyy 0000 00xx
+ *		xx		= bank number
+ *		yyyy yyyy	= 0x33, for identification purposes.
+ */
+#define	BANK_SELECT		14
+
+/* BANK 0  */
+
+#define	TCR		0	/* transmit control register */
+#define TCR_ENABLE	0x0001	/* if this is 1, we can transmit */
+#define TCR_FDUPLX	0x0800	/* receive packets sent out */
+#define TCR_STP_SQET	0x1000	/* stop transmitting if Signal quality error */
+#define	TCR_MON_CNS	0x0400	/* monitors the carrier status */
+#define	TCR_PAD_ENABLE	0x0080	/* pads short packets to 64 bytes */
+
+#define	TCR_CLEAR	0	/* do NOTHING */
+/* the normal settings for the TCR register : */
+#define	TCR_NORMAL	(TCR_ENABLE | TCR_PAD_ENABLE)
+
+
+#define EPH_STATUS	2
+#define ES_LINK_OK	0x4000	/* is the link integrity ok ? */
+
+#define	RCR		4
+#define RCR_SOFTRESET	0x8000	/* resets the chip */
+#define	RCR_STRIP_CRC	0x200	/* strips CRC */
+#define RCR_ENABLE	0x100	/* IFF this is set, we can receive packets */
+#define RCR_ALMUL	0x4	/* receive all multicast packets */
+#define	RCR_PROMISC	0x2	/* enable promiscuous mode */
+
+/* the normal settings for the RCR register : */
+#define	RCR_NORMAL	(RCR_STRIP_CRC | RCR_ENABLE)
+#define RCR_CLEAR	0x0		/* set it to a base state */
+
+#define	COUNTER		6
+#define	MIR		8
+#define	MCR		10
+/* 12 is reserved */
+
+/* BANK 1 */
+#define CONFIG			0
+#define CFG_AUI_SELECT		0x100
+#define	BASE			2
+#define	ADDR0			4
+#define	ADDR1			6
+#define	ADDR2			8
+#define	GENERAL			10
+#define	CONTROL			12
+#define	CTL_POWERDOWN		0x2000
+#define	CTL_LE_ENABLE		0x80
+#define	CTL_CR_ENABLE		0x40
+#define	CTL_TE_ENABLE		0x0020
+#define CTL_AUTO_RELEASE	0x0800
+#define	CTL_EPROM_ACCESS	0x0003 /* high if Eprom is being read */
+
+/* BANK 2 */
+#define MMU_CMD		0
+#define MC_BUSY		1	/* only readable bit in the register */
+#define MC_NOP		0
+#define	MC_ALLOC	0x20	/* or with number of 256 byte packets */
+#define	MC_RESET	0x40
+#define	MC_REMOVE	0x60	/* remove the current rx packet */
+#define MC_RELEASE	0x80	/* remove and release the current rx packet */
+#define MC_FREEPKT	0xA0	/* Release packet in PNR register */
+#define MC_ENQUEUE	0xC0	/* Enqueue the packet for transmit */
+
+#define	PNR_ARR		2
+#define FIFO_PORTS	4
+
+#define FP_RXEMPTY	0x8000
+#define FP_TXEMPTY	0x80
+
+#define	POINTER		6
+#define PTR_READ	0x2000
+#define	PTR_RCV		0x8000
+#define	PTR_AUTOINC	0x4000
+#define PTR_AUTO_INC	0x0040
+
+#define	DATA_1		8
+#define	DATA_2		10
+#define	INTERRUPT	12
+
+#define INT_MASK	13
+#define IM_RCV_INT	0x1
+#define	IM_TX_INT	0x2
+#define	IM_TX_EMPTY_INT	0x4
+#define	IM_ALLOC_INT	0x8
+#define	IM_RX_OVRN_INT	0x10
+#define	IM_EPH_INT	0x20
+#define	IM_ERCV_INT	0x40 /* not on SMC9192 */
+
+/* BANK 3 */
+#define	MULTICAST1	0
+#define	MULTICAST2	2
+#define	MULTICAST3	4
+#define	MULTICAST4	6
+#define	MGMT		8
+#define	REVISION	10 /* ( hi: chip id   low: rev # ) */
+
+
+/* this is NOT on SMC9192 */
+#define	ERCV		12
+
+/* Note that 9194 and 9196 have the smame chip id,
+ * the 9196 will have revisions starting at 6 */
+#define CHIP_9190	3
+#define CHIP_9194	4
+#define CHIP_9195	5
+#define CHIP_9196	4
+#define CHIP_91100	7
+#define CHIP_91100FD	8
+
+#define REV_9196	6
+
+/*
+ * Transmit status bits
+ */
+#define TS_SUCCESS	0x0001
+#define TS_LOSTCAR	0x0400
+#define TS_LATCOL	0x0200
+#define TS_16COL	0x0010
+
+/*
+ * Receive status bits
+ */
+#define RS_ALGNERR	0x8000
+#define RS_BADCRC	0x2000
+#define RS_ODDFRAME	0x1000
+#define RS_TOOLONG	0x0800
+#define RS_TOOSHORT	0x0400
+#define RS_MULTICAST	0x0001
+#define RS_ERRORS	(RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
+
+
+/*-------------------------------------------------------------------------
+ *  I define some macros to make it easier to do somewhat common
+ * or slightly complicated, repeated tasks.
+ --------------------------------------------------------------------------*/
+
+/* select a register bank, 0 to 3  */
+
+#define SMC_SELECT_BANK(x, y) { _outw( y, x + BANK_SELECT ); }
+
+/* define a small delay for the reset */
+#define SMC_DELAY(x) { inw( x + RCR );\
+			inw( x + RCR );\
+			inw( x + RCR ); }
+
+
+#endif	/* _SMC_9000_H_ */
+