[ethernet] Update mii.h and use it in drivers that had a private copy

Signed-off-by: Michael Brown <mcb30@etherboot.org>

1 files changed, 36 insertions, 4 deletions

diff --git a/src/include/mii.h b/src/include/mii.h
index 27a0b639..05c54f09 100644..100755
--- a/src/include/mii.h
+++ b/src/include/mii.h
@@ -24,6 +24,9 @@ FILE_LICENCE ( GPL2_ONLY );
 #define MII_ADVERTISE       0x04	/* Advertisement control reg   */
 #define MII_LPA             0x05	/* Link partner ability reg    */
 #define MII_EXPANSION       0x06        /* Expansion register          */
+#define MII_CTRL1000        0x09        /* 1000BASE-T control          */
+#define MII_STAT1000        0x0a        /* 1000BASE-T status           */
+#define MII_ESTATUS         0x0f        /* Extended Status */
 #define MII_DCOUNTER        0x12        /* Disconnect counter          */
 #define MII_FCSCOUNTER      0x13        /* False carrier counter       */
 #define MII_NWAYTEST        0x14        /* N-way auto-neg test reg     */
@@ -37,7 +40,8 @@ FILE_LICENCE ( GPL2_ONLY );
 #define MII_NCONFIG         0x1c        /* Network interface config    */
 
 /* Basic mode control register. */
-#define BMCR_RESV               0x007f  /* Unused...                   */
+#define BMCR_RESV               0x003f  /* Unused...                   */
+#define BMCR_SPEED1000          0x0040  /* MSB of Speed (1000)         */
 #define BMCR_CTST               0x0080  /* Collision test              */
 #define BMCR_FULLDPLX           0x0100	/* Full duplex                 */
 #define BMCR_ANRESTART          0x0200	/* Auto negotiation restart    */
@@ -55,7 +59,10 @@ FILE_LICENCE ( GPL2_ONLY );
 #define BMSR_ANEGCAPABLE        0x0008  /* Able to do auto-negotiation */
 #define BMSR_RFAULT             0x0010  /* Remote fault detected       */
 #define BMSR_ANEGCOMPLETE       0x0020  /* Auto-negotiation complete   */
-#define BMSR_RESV               0x07c0  /* Unused...                   */
+#define BMSR_RESV               0x00c0  /* Unused...                   */
+#define BMSR_ESTATEN            0x0100  /* Extended Status in R15 */
+#define BMSR_100HALF2           0x0200  /* Can do 100BASE-T2 HDX */
+#define BMSR_100FULL2           0x0400  /* Can do 100BASE-T2 FDX */
 #define BMSR_10HALF             0x0800  /* Can do 10mbps, half-duplex  */
 #define BMSR_10FULL             0x1000  /* Can do 10mbps, full-duplex  */
 #define BMSR_100HALF            0x2000  /* Can do 100mbps, half-duplex */
@@ -66,11 +73,17 @@ FILE_LICENCE ( GPL2_ONLY );
 #define ADVERTISE_SLCT          0x001f  /* Selector bits               */
 #define ADVERTISE_CSMA          0x0001  /* Only selector supported     */
 #define ADVERTISE_10HALF        0x0020	/* Try for 10mbps half-duplex  */
+#define ADVERTISE_1000XFULL     0x0020  /* Try for 1000BASE-X full-duplex */
 #define ADVERTISE_10FULL        0x0040	/* Try for 10mbps full-duplex  */
+#define ADVERTISE_1000XHALF     0x0040  /* Try for 1000BASE-X half-duplex */
 #define ADVERTISE_100HALF       0x0080	/* Try for 100mbps half-duplex */
+#define ADVERTISE_1000XPAUSE    0x0080  /* Try for 1000BASE-X pause    */
 #define ADVERTISE_100FULL       0x0100	/* Try for 100mbps full-duplex */
+#define ADVERTISE_1000XPSE_ASYM 0x0100  /* Try for 1000BASE-X asym pause */
 #define ADVERTISE_100BASE4      0x0200  /* Try for 100mbps 4k packets  */
-#define ADVERTISE_RESV          0x1c00  /* Unused...                   */
+#define ADVERTISE_PAUSE_CAP     0x0400  /* Try for pause               */
+#define ADVERTISE_PAUSE_ASYM    0x0800  /* Try for asymetric pause     */
+#define ADVERTISE_RESV          0x1000  /* Unused...                   */
 #define ADVERTISE_RFAULT        0x2000  /* Say we can detect faults    */
 #define ADVERTISE_LPACK         0x4000  /* Ack link partners response  */
 #define ADVERTISE_NPAGE         0x8000  /* Next page bit               */
@@ -83,11 +96,17 @@ FILE_LICENCE ( GPL2_ONLY );
 /* Link partner ability register. */
 #define LPA_SLCT                0x001f  /* Same as advertise selector  */
 #define LPA_10HALF              0x0020  /* Can do 10mbps half-duplex   */
+#define LPA_1000XFULL           0x0020  /* Can do 1000BASE-X full-duplex */
 #define LPA_10FULL              0x0040  /* Can do 10mbps full-duplex   */
+#define LPA_1000XHALF           0x0040  /* Can do 1000BASE-X half-duplex */
 #define LPA_100HALF             0x0080  /* Can do 100mbps half-duplex  */
+#define LPA_1000XPAUSE          0x0080  /* Can do 1000BASE-X pause     */
 #define LPA_100FULL             0x0100  /* Can do 100mbps full-duplex  */
+#define LPA_1000XPAUSE_ASYM     0x0100  /* Can do 1000BASE-X pause asym*/
 #define LPA_100BASE4            0x0200  /* Can do 100mbps 4k packets   */
-#define LPA_RESV                0x1c00  /* Unused...                   */
+#define LPA_PAUSE_CAP           0x0400  /* Can pause                   */
+#define LPA_PAUSE_ASYM          0x0800  /* Can pause asymetrically     */
+#define LPA_RESV                0x1000  /* Unused...                   */
 #define LPA_RFAULT              0x2000  /* Link partner faulted        */
 #define LPA_LPACK               0x4000  /* Link partner acked us       */
 #define LPA_NPAGE               0x8000  /* Next page bit               */
@@ -103,11 +122,24 @@ FILE_LICENCE ( GPL2_ONLY );
 #define EXPANSION_MFAULTS       0x0010  /* Multiple faults detected    */
 #define EXPANSION_RESV          0xffe0  /* Unused...                   */
 
+#define ESTATUS_1000_TFULL      0x2000  /* Can do 1000BT Full */
+#define ESTATUS_1000_THALF      0x1000  /* Can do 1000BT Half */
+
 /* N-way test register. */
 #define NWAYTEST_RESV1          0x00ff  /* Unused...                   */
 #define NWAYTEST_LOOPBACK       0x0100  /* Enable loopback for N-way   */
 #define NWAYTEST_RESV2          0xfe00  /* Unused...                   */
 
+/* 1000BASE-T Control register */
+#define ADVERTISE_1000FULL      0x0200  /* Advertise 1000BASE-T full duplex */
+#define ADVERTISE_1000HALF      0x0100  /* Advertise 1000BASE-T half duplex */
+
+/* 1000BASE-T Status register */
+#define LPA_1000LOCALRXOK       0x2000  /* Link partner local receiver status */
+#define LPA_1000REMRXOK         0x1000  /* Link partner remote receiver status */
+#define LPA_1000FULL            0x0800  /* Link partner 1000BASE-T full duplex */
+#define LPA_1000HALF            0x0400  /* Link partner 1000BASE-T half duplex */
+
 #include <gpxe/netdevice.h>
 
 struct mii_if_info {