summaryrefslogtreecommitdiffstats
path: root/src/include
Commit message (Collapse)AuthorAgeFilesLines
...
* [ping] Allow termination after a specified number of packetsMichael Brown2014-10-232-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Add the "-c <count>" option to the "ping" command, allowing for automatic termination after a specified number of packets. When a number of packets is specified: - if a serious error (i.e. length mismatch or content mismatch) occurs, then the ping will be immediately terminated with the relevant status code; - if at least one response is received successfully, and all errors are non-serious (i.e. timeouts or out-of-sequence responses), then the ping will be terminated after the final response (or timeout) with a success status; - if no responses are received successfully, then the ping will be terminated after the final timeout with ETIMEDOUT. If no number of packets is specified, then the ping will continue until manually interrupted. Originally-implemented-by: Cedric Levasseur <cyr-ius@ipocus.net> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Add NII / UNDI driverMichael Brown2014-10-164-0/+843
| | | | | | | | | | | | | | | | | | | | | | | Some UEFI network drivers provide a software UNDI interface which is exposed via the Network Interface Identifier Protocol (NII), rather than providing a Simple Network Protocol (SNP). The UEFI platform firmware will usually include the SnpDxe driver, which attaches to NII and provides an SNP interface. The SNP interface is usually provided on the same handle as the underlying NII device. This causes problems for our EFI driver model: when efi_driver_connect() detaches existing drivers from the handle it will cause the SNP interface to be uninstalled, and so our SNP driver will not be able to attach to the handle. The platform firmware will eventually reattach the SnpDxe driver and may attach us to the SNP handle, but we have no way to prevent other drivers from attaching first. Fix by providing a driver which can attach directly to the NII protocol, using the software UNDI interface to drive the network device. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Update to current EDK2 headersMichael Brown2014-10-165-15/+60
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Generalise snpnet_dev_info() to efi_device_info()Michael Brown2014-10-161-0/+4
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Add definitions of GUIDs observed when chainloading from Intel driverMichael Brown2014-09-2510-0/+4123
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Centralise definitions of more protocol GUIDsMichael Brown2014-09-251-0/+3
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Avoid returning uninitialised data from PCI configuration space readsMichael Brown2014-09-041-0/+3
| | | | | | | | Under UEFI, reads from PCI configuration space may fail. If this happens, we should return all-ones (which will mimic the behaviour of an absent PCI device). Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Wrap any images loaded by our wrapped imageMichael Brown2014-08-292-2/+2
| | | | | | | | | | | | Propagate our modified EFI system table to any images loaded by the image that we wrap, thereby allowing us to observe boot services calls made by all subsequent EFI images. Also show details of intercepted ExitBootServices() calls. When wrapping is used, exiting boot services will almost certainly fail, but this at least allows us to see when it happens. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Add definitions of GUIDs observed during Windows bootMichael Brown2014-08-216-0/+3773
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [xen] Cope with unexpected initial backend statesMichael Brown2014-08-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Under some circumstances (e.g. if iPXE itself is booted via iSCSI, or after an unclean reboot), the backend may not be in the expected InitWait state when iPXE starts up. There is no generic reset mechanism for Xenbus devices. Recent versions of xen-netback will gracefully perform all of the required steps if the frontend sets its state to Initialising. Older versions (such as that found in XenServer 6.2.0) require the frontend to transition through Closed before reaching Initialising. Add a reset mechanism for netfront devices which does the following: - read current backend state - if backend state is anything other than InitWait, then set the frontend state to Closed and wait for the backend to also reach Closed - set the frontend state to Initialising and wait for the backend to reach InitWait. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [xen] Use version 1 grant tables by defaultMichael Brown2014-08-132-12/+144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using version 1 grant tables limits guests to using 16TB of grantable RAM, and prevents the use of subpage grants. Some versions of the Xen hypervisor refuse to allow the grant table version to be set after the first grant references have been created, so the loaded operating system may be stuck with whatever choice we make here. We therefore currently use version 2 grant tables, since they give the most flexibility to the loaded OS. Current versions (7.2.0) of the Windows PV drivers have no support for version 2 grant tables, and will merrily create version 1 entries in what the hypervisor believes to be a version 2 table. This causes some confusion. Avoid this problem by attempting to use version 1 tables, since otherwise we may render Windows unable to boot. Play nicely with other potential bootloaders by accepting either version 1 or version 2 grant tables (if we are unable to set our requested version). Note that the use of version 1 tables on a 64-bit system introduces a possible failure path in which a frame number cannot fit into the 32-bit field within the v1 structure. This in turn introduces additional failure paths into netfront_transmit() and netfront_refill_rx(). Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Generalise snpnet_pci_info() to efi_locate_device()Michael Brown2014-08-061-0/+2
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Move abstract device path and handle functions to efi_utils.cMichael Brown2014-08-063-4/+20
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Open device path protocol only at point of useMichael Brown2014-08-062-8/+2Star
| | | | | | | | | | | | Some EFI 1.10 systems (observed on an Apple iMac) do not allow us to open the device path protocol with an attribute of EFI_OPEN_PROTOCOL_BY_DRIVER and so we cannot maintain a safe, long-lived pointer to the device path. Work around this by instead opening the device path protocol with an attribute of EFI_OPEN_PROTOCOL_GET_PROTOCOL whenever we need to use it. Debugged-by: Curtis Larsen <larsen@dixie.edu> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Provide centralised definitions of commonly-used GUIDsMichael Brown2014-08-061-0/+16
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Avoid unnecessarily passing pointers to EFI_HANDLEsMichael Brown2014-07-312-3/+3
| | | | | | | | | | | | efi_file_install() and efi_download_install() are both used to install onto existing handles. There is therefore no need to allow for each of their calls to InstallMultipleProtocolInterfaces() to create a new handle. By passing the handle directly (rather than a pointer to the handle), we avoid potential confusion (and erroneous debug message colours). Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Allow compiler to perform type checks on EFI_HANDLEMichael Brown2014-07-311-0/+10
| | | | | | | | | The EFI headers define EFI_HANDLE as a void pointer, which renders type checking on anything dealing with EFI handles somewhat useless. Work around this bizarre sabotage attempt by redefining EFI_HANDLE as a pointer to an anonymous structure. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Use efi_handle_name() instead of efi_handle_devpath_text()Michael Brown2014-07-311-1/+0Star
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Add ability to dump all openers of a given protocol on a handleMichael Brown2014-07-311-1/+26
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Provide efi_handle_name() for debuggingMichael Brown2014-07-311-0/+1
| | | | | | | | Provide a function efi_handle_name() (as a generalisation of efi_handle_devpath_text()) which tries various methods to produce a human-readable name for an EFI handle. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Expand the range of well-known EFI GUIDs in debug messagesMichael Brown2014-07-313-0/+292
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [netdevice] Avoid registering duplicate network devicesMichael Brown2014-07-301-0/+2
| | | | | | | | | | | | | | | | | Reject network devices which appear to be duplicates of those already available via a different underlying hardware device. On a Xen PV-HVM system, this allows us to filter out the emulated PCI NICs (which would otherwise appear alongside the netfront NICs). Note that we cannot use the Xen facility to "unplug" the emulated PCI NICs, since there is no guarantee that the OS we subsequently load will have a native netfront driver. We permit devices with the same MAC address if they are attached to the same underlying hardware device (e.g. VLAN devices). Inspired-by: Marin Hannache <git@mareo.fr> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Default to releasing network devices for use via SNPMichael Brown2014-07-301-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | We currently treat network devices as available for use via the SNP API only if RX queue processing has been frozen. (This is similar in spirit to the way that RX queue processing is frozen for the network device currently exposed via the PXE API.) The default state of a freshly created network device is for the RX queue to not be frozen, and thus to be unavailable for use via SNP. This causes problems when devices are added through code paths other than _efidrv_start() (which explicitly releases devices for use via SNP). We don't actually need to freeze RX queue processing, since calls via the SNP API will always use netdev_poll() rather than net_poll(), and so will never trigger the RX queue processing code path anyway. We can therefore simplify the code to use a single global flag to indicate whether network devices are claimed for use by iPXE or available for use via SNP. Using a global flag allows the default state for dynamically created network devices to behave sensibly. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [xen] Add support for Xen netfront virtual NICsMichael Brown2014-07-291-0/+1
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [xen] Add basic support for PV-HVM domainsMichael Brown2014-07-299-0/+444
| | | | | | | | | Add basic support for Xen PV-HVM domains (detected via the Xen platform PCI device with IDs 5853:0001), including support for accessing configuration via XenStore and enumerating devices via XenBus. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [xen] Import selected public headersMichael Brown2014-07-2919-0/+5650
| | | | | | | | | | | | Import selected headers from the xen/include/public directory of the Xen repository at git://xenbits.xen.org/xen.git The script ./include/xen/import.pl can be used to automatically import any required headers and their dependencies (in a similar fashion to ./include/ipxe/efi/import.pl). Trailing whitespace is stripped and an appropriate FILE_LICENCE declaration is added to each header file. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [ioapi] Centralise notion of PAGE_SIZEMichael Brown2014-07-282-3/+6
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Include EFI_CONSOLE_CONTROL_PROTOCOL headerMichael Brown2014-07-162-1/+125
| | | | | | | | | | | | The EFI_CONSOLE_CONTROL_PROTOCOL does not exist in the current UEFI specification, but is required to enable text output on some older EFI 1.10 implementations (observed on an old iMac). The header is not present in any of the standard include directories, but can still be found in the EDK2 codebase as part of EdkCompatibilityPkg. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Allow for interception of boot services calls by loaded imageMichael Brown2014-07-161-0/+16
| | | | | | | When building with DEBUG=efi_wrap, print details of calls made by the loaded image to selected boot services functions. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Install our own disk I/O protocol and claim exclusive use of itMichael Brown2014-07-141-0/+119
| | | | | | | | | | | | | | | | | | | The EFI FAT filesystem driver has a bug: if a block device contains no FAT filesystem but does have an EFI_SIMPLE_FILE_SYSTEM_PROTOCOL instance, the FAT driver will assume that it must have previously installed the EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. This causes the FAT driver to claim control of our device, and to refuse to stop driving it, which prevents us from later uninstalling correctly. Work around this bug by opening the disk I/O protocol ourselves, thereby preventing the FAT driver from opening it. Note that the alternative approach of opening the block I/O protocol (and thereby in theory preventing DiskIo from attaching to the block I/O protocol) causes an endless loop of calls to our DRIVER_STOP method when starting the EFI shell. I have no idea why this is. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Update EDK2 headersMichael Brown2014-07-1420-96/+533
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [crypto] Add support for iPAddress subject alternative namesMichael Brown2014-07-111-0/+1
| | | | | Originally-implemented-by: Jarrod Johnson <jarrod.b.johnson@gmail.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Identify autoboot device by MAC address when chainloadingMichael Brown2014-07-081-0/+14
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [autoboot] Allow autoboot device to be identified by link-layer addressMichael Brown2014-07-081-2/+4
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Allow network devices to be created on top of arbitrary SNP devicesMichael Brown2014-07-035-34/+56
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Restructure EFI driver modelMichael Brown2014-06-252-33/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | Provide a single instance of EFI_DRIVER_BINDING_PROTOCOL (attached to our image handle); this matches the expectations scattered throughout the EFI specification. Open the underlying hardware device using EFI_OPEN_PROTOCOL_BY_DRIVER and EFI_OPEN_PROTOCOL_EXCLUSIVE, to prevent other drivers from attaching to the same device. Do not automatically connect to devices when being loaded as a driver; leave this task to the platform firmware (or to the user, if loading directly from the EFI shell). When running as an application, forcibly disconnect any existing drivers from devices that we want to control, and reconnect them on exit. Provide a meaningful driver version number (based on the build timestamp), to allow platform firmware to automatically load newer versions of iPXE drivers if multiple drivers are present. Include device paths within debug messages where possible, to aid in debugging. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Provide a meaningful EFI SNP device nameMichael Brown2014-06-251-1/+1
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Allow device paths to be easily included in debug messagesMichael Brown2014-06-251-16/+2Star
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [build] Expose build timestamp, build name, and product namesMichael Brown2014-06-241-1/+12
| | | | | | | | Expose the build timestamp (measured in seconds since the Epoch) and the build name (e.g. "rtl8139.rom" or "ipxe.efi"), and provide the product name and product short name in a single centralised location. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [smbios] Expose board serial number as ${board-serial}Dale Hamel2014-06-121-0/+17
| | | | | | | | With blade servers, the chassis serial number (exposed via ${serial}) may not be unique. Expose ${board-serial} as a named setting to provide easy access to a more meaningful serial number. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [iscsi] Include IP address origin in iBFTMichael Brown2014-06-121-0/+8
| | | | | | | | | | | The iBFT includes an "origin" field to indicate the source of the IP address. We use the heuristic of assuming that the source should be "manual" if the IP address originates directly from the network device settings block, and "DHCP" otherwise. This is an imperfect guess, but is likely to be correct in most common situations. Originally-implemented-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [scsi] Improve sense code parsingMichael Brown2014-06-031-4/+47
| | | | | | | | Parse the sense data to extract the reponse code, the sense key, the additional sense code, and the additional sense code qualifier. Originally-implemented-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [ethernet] Provide eth_random_addr() to generate random Ethernet addressesHannes Reinecke2014-06-021-0/+1
| | | | | Modified-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [ipv6] Fix definition of IN6_IS_ADDR_LINKLOCAL()Michael Brown2014-05-211-1/+1
| | | | | | | | Fix an erroneous htonl() in the definition of IN6_IS_ADDR_LINKLOCAL(), and add self-tests for the IN6_IS_ADDR_xxx() family of macros. Reported-by: Marin Hannache <git@mareo.fr> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [efi] Allow for optional protocolsMichael Brown2014-05-191-0/+17
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [nfs] Rewrite NFS URI handlingMarin Hannache2014-05-182-0/+30
| | | | | | | | Get the NFS URI manipulation code out of nfs_open.c. The resulting code is now much more readable. Signed-off-by: Marin Hannache <git@mareo.fr> Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [profile] Allow interrupts to be excluded from profiling resultsMichael Brown2014-05-041-12/+79
| | | | | | | | | Interrupt processing adds noise to profiling results. Allow interrupts (from within protected mode) to be profiled separately, with time spent within the interrupt handler being excluded from any other profiling currently in progress. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [profile] Provide methods for profiling individual stages of operationsMichael Brown2014-05-031-7/+35
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [build] Allow for a debug level of zeroMichael Brown2014-04-281-15/+2Star
| | | | | | | | Allow for an explicit debug level of zero, which will enable assertions and profiling (i.e. anything controlled by NDEBUG) without generating any debug messages. Signed-off-by: Michael Brown <mcb30@ipxe.org>
* [cmdline] Add "profstat" command to display profiling statisticsMichael Brown2014-04-281-0/+14
| | | | Signed-off-by: Michael Brown <mcb30@ipxe.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2026-02-28 19:35:03 +0100