1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
|
/*------------------------------------------------------------------------
* smc9000.h
*
* Copyright (C) 1998 by Daniel Engström
* Copyright (C) 1996 by Erik Stahlman
*
* This software may be used and distributed according to the terms
* of the GNU Public License, incorporated herein by reference.
*
* This file contains register information and access macros for
* the SMC91xxx chipset.
*
* Information contained in this file was obtained from the SMC91C94
* manual from SMC. To get a copy, if you really want one, you can find
* information under www.smsc.com in the components division.
* ( this thanks to advice from Donald Becker ).
*
* Authors
* Daniel Engström <daniel.engstrom@riksnett.no>
* Erik Stahlman <erik@vt.edu>
*
* History
* 96-01-06 Erik Stahlman moved definitions here from main .c
* file
* 96-01-19 Erik Stahlman polished this up some, and added
* better error handling
* 98-09-25 Daniel Engström adjusted for Etherboot
* 98-09-27 Daniel Engström moved some static strings back to the
* main .c file
* --------------------------------------------------------------------------*/
#ifndef _SMC9000_H_
# define _SMC9000_H_
/* I want some simple types */
typedef unsigned char byte;
typedef unsigned short word;
typedef unsigned long int dword;
/*---------------------------------------------------------------
*
* A description of the SMC registers is probably in order here,
* although for details, the SMC datasheet is invaluable.
*
* Basically, the chip has 4 banks of registers ( 0 to 3 ), which
* are accessed by writing a number into the BANK_SELECT register
* ( I also use a SMC_SELECT_BANK macro for this ).
*
* The banks are configured so that for most purposes, bank 2 is all
* that is needed for simple run time tasks.
* ----------------------------------------------------------------------*/
/*
* Bank Select Register:
*
* yyyy yyyy 0000 00xx
* xx = bank number
* yyyy yyyy = 0x33, for identification purposes.
*/
#define BANK_SELECT 14
/* BANK 0 */
#define TCR 0 /* transmit control register */
#define TCR_ENABLE 0x0001 /* if this is 1, we can transmit */
#define TCR_FDUPLX 0x0800 /* receive packets sent out */
#define TCR_STP_SQET 0x1000 /* stop transmitting if Signal quality error */
#define TCR_MON_CNS 0x0400 /* monitors the carrier status */
#define TCR_PAD_ENABLE 0x0080 /* pads short packets to 64 bytes */
#define TCR_CLEAR 0 /* do NOTHING */
/* the normal settings for the TCR register : */
#define TCR_NORMAL (TCR_ENABLE | TCR_PAD_ENABLE)
#define EPH_STATUS 2
#define ES_LINK_OK 0x4000 /* is the link integrity ok ? */
#define RCR 4
#define RCR_SOFTRESET 0x8000 /* resets the chip */
#define RCR_STRIP_CRC 0x200 /* strips CRC */
#define RCR_ENABLE 0x100 /* IFF this is set, we can receive packets */
#define RCR_ALMUL 0x4 /* receive all multicast packets */
#define RCR_PROMISC 0x2 /* enable promiscuous mode */
/* the normal settings for the RCR register : */
#define RCR_NORMAL (RCR_STRIP_CRC | RCR_ENABLE)
#define RCR_CLEAR 0x0 /* set it to a base state */
#define COUNTER 6
#define MIR 8
#define MCR 10
/* 12 is reserved */
/* BANK 1 */
#define CONFIG 0
#define CFG_AUI_SELECT 0x100
#define BASE 2
#define ADDR0 4
#define ADDR1 6
#define ADDR2 8
#define GENERAL 10
#define CONTROL 12
#define CTL_POWERDOWN 0x2000
#define CTL_LE_ENABLE 0x80
#define CTL_CR_ENABLE 0x40
#define CTL_TE_ENABLE 0x0020
#define CTL_AUTO_RELEASE 0x0800
#define CTL_EPROM_ACCESS 0x0003 /* high if Eprom is being read */
/* BANK 2 */
#define MMU_CMD 0
#define MC_BUSY 1 /* only readable bit in the register */
#define MC_NOP 0
#define MC_ALLOC 0x20 /* or with number of 256 byte packets */
#define MC_RESET 0x40
#define MC_REMOVE 0x60 /* remove the current rx packet */
#define MC_RELEASE 0x80 /* remove and release the current rx packet */
#define MC_FREEPKT 0xA0 /* Release packet in PNR register */
#define MC_ENQUEUE 0xC0 /* Enqueue the packet for transmit */
#define PNR_ARR 2
#define FIFO_PORTS 4
#define FP_RXEMPTY 0x8000
#define FP_TXEMPTY 0x80
#define POINTER 6
#define PTR_READ 0x2000
#define PTR_RCV 0x8000
#define PTR_AUTOINC 0x4000
#define PTR_AUTO_INC 0x0040
#define DATA_1 8
#define DATA_2 10
#define INTERRUPT 12
#define INT_MASK 13
#define IM_RCV_INT 0x1
#define IM_TX_INT 0x2
#define IM_TX_EMPTY_INT 0x4
#define IM_ALLOC_INT 0x8
#define IM_RX_OVRN_INT 0x10
#define IM_EPH_INT 0x20
#define IM_ERCV_INT 0x40 /* not on SMC9192 */
/* BANK 3 */
#define MULTICAST1 0
#define MULTICAST2 2
#define MULTICAST3 4
#define MULTICAST4 6
#define MGMT 8
#define REVISION 10 /* ( hi: chip id low: rev # ) */
/* this is NOT on SMC9192 */
#define ERCV 12
/* Note that 9194 and 9196 have the smame chip id,
* the 9196 will have revisions starting at 6 */
#define CHIP_9190 3
#define CHIP_9194 4
#define CHIP_9195 5
#define CHIP_9196 4
#define CHIP_91100 7
#define CHIP_91100FD 8
#define REV_9196 6
/*
* Transmit status bits
*/
#define TS_SUCCESS 0x0001
#define TS_LOSTCAR 0x0400
#define TS_LATCOL 0x0200
#define TS_16COL 0x0010
/*
* Receive status bits
*/
#define RS_ALGNERR 0x8000
#define RS_BADCRC 0x2000
#define RS_ODDFRAME 0x1000
#define RS_TOOLONG 0x0800
#define RS_TOOSHORT 0x0400
#define RS_MULTICAST 0x0001
#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
/*-------------------------------------------------------------------------
* I define some macros to make it easier to do somewhat common
* or slightly complicated, repeated tasks.
--------------------------------------------------------------------------*/
/* select a register bank, 0 to 3 */
#define SMC_SELECT_BANK(x, y) { _outw( y, x + BANK_SELECT ); }
/* define a small delay for the reset */
#define SMC_DELAY(x) { inw( x + RCR );\
inw( x + RCR );\
inw( x + RCR ); }
#endif /* _SMC_9000_H_ */
|