path: root/lib.c

/* lib.c - MemTest-86  Version 3.4
 *
 * Released under version 2 of the Gnu Public License.
 * By Chris Brady
 */
#include "io.h"
#include "serial.h"
#include "test.h"
#include "config.h"
#include "screen_buffer.h"
#include "stdint.h"
#include "cpuid.h"
#include "smp.h"


int slock = 0, lsr = 0;
short serial_cons = SERIAL_CONSOLE_DEFAULT;
#if SERIAL_TTY != 0 && SERIAL_TTY != 1
#error Bad SERIAL_TTY. Only ttyS0 and ttyS1 are supported.
#endif
short serial_tty = SERIAL_TTY;
const short serial_base_ports[] = {0x3f8, 0x2f8};

#if ((115200%SERIAL_BAUD_RATE) != 0)
#error Bad default baud rate
#endif
int serial_baud_rate = SERIAL_BAUD_RATE;
unsigned char serial_parity = 0;
unsigned char serial_bits = 8;

extern volatile int mstr_cpu;
extern volatile int bail;

struct ascii_map_str {
    int ascii;
    int keycode;
};

void reboot(void)
{
	
    /* tell the BIOS to do a cold start */
    *((unsigned short *)0x472) = 0x0;
	
    while(1)
    {
        outb(0xFE, 0x64);
        outb(0x02, 0xcf9); /* reset that doesn't rely on the keyboard controller */
        outb(0x04, 0xcf9);
        outb(0x0E, 0xcf9);
    }
}

int mt86_strlen(char * string){
    int i=0;
    while(*string++){i++;};
    return i;
}

int mt86_strstr(char *haystack, char * needle)
{
    int i=0,j=0;
    int here=0;
    while(1){
        if(needle[i]==haystack[j])
        {
            if(here==0)
                here=j;
            i++;j++;
            if(i>=mt86_strlen(needle))
            {
                return here;
            }
            if(j>=mt86_strlen(haystack))
            {
                return -1;
            }
        } else {
            j++;i=0;here=0;
        }
    }
}

int mt86_memcmp(const void *s1, const void *s2, ulong count)
{
    const unsigned char *src1 = s1, *src2 = s2;
    int i;
    for(i = 0; i < count; i++) {
        if (src1[i] != src2[i]) {
            return (int)src1[i] - (int)src2[i];
        }
    }
    return 0;
}

int mt86_strncmp(const char *s1, const char *s2, ulong n) {
    signed char res = 0;
    while (n) {
        res = *s1 - *s2;
        if (res != 0)
            return res;
        if (*s1 == '\0')
            return 0;
        ++s1, ++s2;
        --n;
    }
    return res;
}

void *mt86_memmove(void *dest, const void *src, ulong n)
{
    long i;
    char *d = (char *)dest, *s = (char *)src;

    /* If src == dest do nothing */
    if (dest < src) {
        for(i = 0; i < n; i++) {
            d[i] = s[i];
        }
    }
    else if (dest > src) {
        for(i = n -1; i >= 0; i--) {
            d[i] = s[i];
        }
    }
    return dest;
}

char toupper(char c)
{
    if (c >= 'a' && c <= 'z')
        return c + 'A' -'a';
    else
        return c;
}

int mt86_isdigit(char c)
{
    return c >= '0' && c <= '9';
}

int isxdigit(char c)
{
    return mt86_isdigit(c) || (toupper(c) >= 'A' && toupper(c) <= 'F'); }

unsigned long simple_strtoul(const char *cp, char **endp, unsigned int base) {
    unsigned long result = 0, value;

    if (!base) {
        base = 10;
        if (*cp == '0') {
            base = 8;
            cp++;
            if (toupper(*cp) == 'X' && isxdigit(cp[1])) {
                cp++;
                base = 16;
            }
        }
    } else if (base == 16) {
        if (cp[0] == '0' && toupper(cp[1]) == 'X')
            cp += 2;
    }
    while (isxdigit(*cp) &&
           (value = mt86_isdigit(*cp) ? *cp-'0' : toupper(*cp)-'A'+10) < base) {
        result = result*base + value;
        cp++;
    }
    if (endp)
        *endp = (char *)cp;
    return result;
}

/*
 * Scroll the error message area of the screen as needed
 * Starts at line LINE_SCROLL and ends at line 23
 */
void scroll(void) 
{
    int i, j;
    char *s, tmp;

    /* Only scroll if at the bottom of the screen */
    if (vv->msg_line < 23) {
        vv->msg_line++;
    } else {
        /* If scroll lock is on, loop till it is cleared */
        while (slock) {
            check_input();
        }
        for (i=LINE_SCROLL; i<23; i++) {
            s = (char *)(SCREEN_ADR + ((i+1) * 160));
            for (j=0; j<160; j+=2, s+=2) {
                *(s-160) = *s;
                tmp = get_scrn_buf(i+1, j/2);
                set_scrn_buf(i, j/2, tmp);
            }
        }
        /* Clear the newly opened line */
        s = (char *)(SCREEN_ADR + (23 * 160));
        for (j=0; j<80; j++) {
            *s = ' ';
            set_scrn_buf(23, j, ' ');
            s += 2;
        }
        tty_print_region(LINE_SCROLL, 0, 23, 79);
    }
}

/*
 * Clear scroll region
 */
void clear_scroll(void)
{
    int i;
    char *s;

    s = (char*)(SCREEN_ADR+LINE_HEADER*160);
    for(i=0; i<80*(24-LINE_HEADER); i++) {
        *s++ = ' ';
        *s++ = 0x17;
    }
}

/*
 * Place a single character on screen
 */
void cplace(int y, int x, const char c)
{
    char *dptr;

    dptr = (char *)(SCREEN_ADR + (160*y) + (2*x));
    *dptr = c;
}

/*
 * Print characters on screen
 */
void cprint(int y, int x, const char *text)
{
    register int i;
    char *dptr;

    dptr = (char *)(SCREEN_ADR + (160*y) + (2*x));
    for (i=0; text[i]; i++) {
        *dptr = text[i];
        dptr += 2;
    }
    tty_print_line(y, x, text);
}

void itoa(char s[], int n) 
{
    int i, sign;

    if((sign = n) < 0)
        n = -n;
    i=0;
    do {
        s[i++] = n % 10 + '0';
    } while ((n /= 10) > 0);
    if(sign < 0)
        s[i++] = '-';
    s[i] = '\0';
    reverse(s);
}

void reverse(char s[])
{
    int c, i, j;
    for(j = 0; s[j] != 0; j++)
        ;

    for(i=0, j = j - 1; i < j; i++, j--) {
        c = s[i];
        s[i] = s[j];
        s[j] = c;
    }
}
void memcpy (void *dst, void *src, int len)
{
    char *s = (char*)src;
    char *d = (char*)dst;
    int i;

    if (len <= 0) {
        return;
    }
    for (i = 0 ; i < len; i++) {
        *d++ = *s++;
    } 
}

/*
 * Print a people friendly address
 */
void aprint(int y, int x, ulong page)
{
    /* page is in multiples of 4K */
    if ((page << 2) < 9999) {
        dprint(y, x, page << 2, 4, 0);
        cprint(y, x+4, "K");
    }
    else if ((page >>8) < 9999) {
        dprint(y, x, (page  + (1 << 7)) >> 8, 4, 0);
        cprint(y, x+4, "M");
    }
    else if ((page >>18) < 9999) {
        dprint(y, x, (page + (1 << 17)) >> 18, 4, 0);
        cprint(y, x+4, "G");
    }
    else {
        dprint(y, x, (page + (1 << 27)) >> 28, 4, 0);
        cprint(y, x+4, "T");
    }
}

/*
 * Print a decimal number on screen
 */
void dprint(int y, int x, ulong val, int len, int right)
{
    ulong j, k;
    int i, flag=0;
    char buf[18];

    if (val > 999999999 || len > 9) {
        return;
    }
    for(i=0, j=1; i<len-1; i++) {
        j *= 10;
    }
    if (!right) {
        for (i=0; j>0; j/=10) {
            k = val/j;
            if (k > 9) {
                j *= 100;
                continue;
            }
            if (flag || k || j == 1) {
                buf[i++] = k + '0';
                flag++;
            } else {
                buf[i++] = ' ';
            }
            val -= k * j;
        }
    } else {
        for(i=0; i<len; j/=10) {
            if (j) {
                k = val/j;
                if (k > 9) {
                    j *= 100;
                    len++;
                    continue;
                }
                if (k == 0 && flag == 0) {
                    continue;				
                }
                buf[i++] = k + '0';
                val -= k * j;
            } else {
                if (flag == 0 &&  i < len-1) {
                    buf[i++] = '0';
                } else {
                    buf[i++] = ' ';
                }
            }
            flag++;
        }
    }
    buf[i] = 0;
    cprint(y,x,buf);
}

/*
 * Print a hex number on screen at least digits long
 */
void hprint2(int y,int x, unsigned long val, int digits)
{
    unsigned long j;
    int i, idx, flag = 0;
    char buf[18];

    for (i=0, idx=0; i<8; i++) {
        j = val >> (28 - (4 * i));
        j &= 0xf;
        if (j < 10) {
            if (flag || j || i == 7) {
                buf[idx++] = j + '0';
                flag++;
            } else {
                buf[idx++] = '0';
            }
        } else {
            buf[idx++] = j + 'a' - 10;
            flag++;
        }
    }
    if (digits > 8) {
        digits = 8;
    }
    if (flag > digits) {
        digits = flag;
    }
    buf[idx] = 0;
    cprint(y,x,buf + (idx - digits));
}

/*
 * Print a hex number on screen exactly digits long
 */
void hprint3(int y,int x, unsigned long val, int digits)
{
    unsigned long j;
    int i, idx, flag = 0;
    char buf[18];

    for (i=0, idx=0; i<digits; i++) {
        j = 0xf & val;
        val /= 16;

        if (j < 10) {
            if (flag || j || i == 7) {
                buf[digits - ++idx] = j + '0';
                flag++;
            } else {
                buf[digits - ++idx] = '0';
            }
        } else {
            buf[digits - ++idx] = j + 'a' - 10;
            flag++;
        }
    }
    buf[idx] = 0;
    cprint(y,x,buf);
}

/*
 * Print a hex number on screen
 */
void hprint(int y, int x, unsigned long val)
{
    return hprint2(y, x, val, 8);
}

/*
 * Print an address in 0000m0000k0000 notation
 */
void xprint(int y,int x, ulong val)
{
    ulong j;

    j = (val & 0xffc00000) >> 20;
    dprint(y, x, j, 4, 0);
    cprint(y, x+4, "m");
    j = (val & 0xffc00) >> 10;
    dprint(y, x+5, j, 4, 0);
    cprint(y, x+9, "k");
    j = val & 0x3ff;
    dprint(y, x+10, j, 4, 0);
}

char *codes[] = {
                 "  Divide",
                 "   Debug",
                 "     NMI",
                 "  Brkpnt",
                 "Overflow",
                 "   Bound",
                 "  Inv_Op",
                 " No_Math",
                 "Double_Fault",
                 "Seg_Over",
                 " Inv_TSS",
                 "  Seg_NP",
                 "Stack_Fault",
                 "Gen_Prot",
                 "Page_Fault",
                 "   Resvd",
                 "     FPE",
                 "Alignment",
                 " Mch_Chk",
                 "SIMD FPE"
};

struct eregs {
    ulong ss;
    ulong ds;
    ulong esp;
    ulong ebp;
    ulong esi;
    ulong edi;
    ulong edx;
    ulong ecx;
    ulong ebx;
    ulong eax;
    ulong vect;
    ulong code;
    ulong eip;
    ulong cs;
    ulong eflag;
};
	
/* Handle an interrupt */
void inter(struct eregs *trap_regs)
{
    int i, line;
    unsigned char *pp;
    ulong address = 0;
    int my_cpu_num = smp_my_cpu_num();

    /* Get the page fault address */
    if (trap_regs->vect == 14) {
        __asm__("movl %%cr2,%0":"=r" (address));
    }
#ifdef PARITY_MEM

    /* Check for a parity error */
    if (trap_regs->vect == 2) {
        parity_err(trap_regs->edi, trap_regs->esi);
        return;
    }
#endif

    /* clear scrolling region */
    pp=(unsigned char *)(SCREEN_ADR+(2*80*(LINE_SCROLL-2)));
    for(i=0; i<2*80*(24-LINE_SCROLL-2); i++, pp+=2) {
        *pp = ' ';
    }
    line = LINE_SCROLL-2;

    cprint(line, 0, "Unexpected Interrupt - Halting CPU");
    dprint(line, COL_MID + 4, my_cpu_num, 2, 1);
    cprint(line+2, 0, " Type: ");
    if (trap_regs->vect <= 19) {
        cprint(line+2, 7, codes[trap_regs->vect]);
    } else {
        hprint(line+2, 7, trap_regs->vect);
    }
    cprint(line+3, 0, "   PC: ");
    hprint(line+3, 7, trap_regs->eip);
    cprint(line+4, 0, "   CS: ");
    hprint(line+4, 7, trap_regs->cs);
    cprint(line+5, 0, "Eflag: ");
    hprint(line+5, 7, trap_regs->eflag);
    cprint(line+6, 0, " Code: ");
    hprint(line+6, 7, trap_regs->code);
    cprint(line+7, 0, "   DS: ");
    hprint(line+7, 7, trap_regs->ds);
    cprint(line+8, 0, "   SS: ");
    hprint(line+8, 7, trap_regs->ss);
    if (trap_regs->vect == 14) {
        /* Page fault address */
        cprint(line+7, 0, " Addr: ");
        hprint(line+7, 7, address);
    }

    cprint(line+2, 20, "eax: ");
    hprint(line+2, 25, trap_regs->eax);
    cprint(line+3, 20, "ebx: ");
    hprint(line+3, 25, trap_regs->ebx);
    cprint(line+4, 20, "ecx: ");
    hprint(line+4, 25, trap_regs->ecx);
    cprint(line+5, 20, "edx: ");
    hprint(line+5, 25, trap_regs->edx);
    cprint(line+6, 20, "edi: ");
    hprint(line+6, 25, trap_regs->edi);
    cprint(line+7, 20, "esi: ");
    hprint(line+7, 25, trap_regs->esi);
    cprint(line+8, 20, "ebp: ");
    hprint(line+8, 25, trap_regs->ebp);
    cprint(line+9, 20, "esp: ");
    hprint(line+9, 25, trap_regs->esp);

    cprint(line+1, 38, "Stack:");
    for (i=0; i<10; i++) {
        hprint(line+2+i, 38, trap_regs->esp+(4*i));
        hprint(line+2+i, 47, *(ulong*)(trap_regs->esp+(4*i)));
        hprint(line+2+i, 57, trap_regs->esp+(4*(i+10)));
        hprint(line+2+i, 66, *(ulong*)(trap_regs->esp+(4*(i+10))));
    }

    cprint(line+11, 0, "CS:EIP:                          ");
    pp = (unsigned char *)trap_regs->eip;
    for(i = 0; i < 9; i++) {
        hprint2(line+11, 8+(3*i), pp[i], 2);
    }

    while(1) {
        check_input();
    }
}

void set_cache(int val) 
{
    switch(val) {
    case 0:
        cache_off();	
        break;
    case 1:
        cache_on();
        break;
    }
}

int get_key() {
    int c;

    c = inb(0x64);
    if ((c & 1) == 0) {
        if (serial_cons) {
            int comstat;
            comstat = serial_echo_inb(UART_LSR);
            if (comstat & UART_LSR_DR) {
                c = serial_echo_inb(UART_RX);
                /* Pressing '.' has same effect as 'c'
                   on a keyboard.
                   Oct 056   Dec 46   Hex 2E   Ascii .
                */
                return (ascii_to_keycode(c));
            }
        }
        return(0);
    }
    c = inb(0x60);
    return((c));
}

void check_input(void)
{
    unsigned char c;

    if ((c = get_key())) {
        switch(c & 0x7f) {
        case 1:	
            /* "ESC" key was pressed, bail out.  */
            cprint(LINE_RANGE, COL_MID+23, "Halting... ");
			vv->exit++;
			bail++;
            break;
        case 46:
            /* c - Configure */
            get_config();
            break;
        case 28:
            /* CR - clear scroll lock */
            slock = 0;
            footer();
            break;
        case 57:
            /* SP - set scroll lock */
            slock = 1;
            footer();
            break;
        case 0x26:
            /* ^L/L - redraw the display */
            tty_print_screen();
            break;
        }
    }
}

void footer()
{
    cprint(24, 0, "(ESC)exit  (c)configuration  (SP)scroll_lock  (CR)scroll_unlock");
    if (slock) {
        cprint(24, 74, "Locked");
    } else {
        cprint(24, 74, "      ");
    }
}

ulong getval(int x, int y, int result_shift)
{
    unsigned long val;
    int done;
    int c;
    int i, n;
    int base;
    int shift;
    char buf[16];

    for(i = 0; i < sizeof(buf)/sizeof(buf[0]); i++ ) {
        buf[i] = ' ';
    }
    buf[sizeof(buf)/sizeof(buf[0]) -1] = '\0';
	
    wait_keyup();
    done = 0;
    n = 0;
    base = 10;
    while(!done) {
        /* Read a new character and process it */
        c = get_key();
        switch(c) {
        case 0x26: /* ^L/L - redraw the display */
            tty_print_screen();
            break;
        case 0x1c: /* CR */
            /* If something has been entered we are done */
            if(n) done = 1;
            break;
        case 0x19: /* p */ buf[n] = 'p'; break;
        case 0x22: /* g */ buf[n] = 'g'; break;
        case 0x32: /* m */ buf[n] = 'm'; break;
        case 0x25: /* k */ buf[n] = 'k'; break;
        case 0x2d: /* x */
            /* Only allow 'x' after an initial 0 */
            if (n == 1 && (buf[0] == '0')) {
                buf[n] = 'x';
            }
            break;
        case 0x0e: /* BS */
            if (n > 0) {
                n -= 1;
                buf[n] = ' ';
            }
            break;
            /* Don't allow entering a number not in our current base */
        case 0x0B: if (base >= 1) buf[n] = '0'; break;
        case 0x02: if (base >= 2) buf[n] = '1'; break;
        case 0x03: if (base >= 3) buf[n] = '2'; break;
        case 0x04: if (base >= 4) buf[n] = '3'; break;
        case 0x05: if (base >= 5) buf[n] = '4'; break;
        case 0x06: if (base >= 6) buf[n] = '5'; break;
        case 0x07: if (base >= 7) buf[n] = '6'; break;
        case 0x08: if (base >= 8) buf[n] = '7'; break;
        case 0x09: if (base >= 9) buf[n] = '8'; break;
        case 0x0A: if (base >= 10) buf[n] = '9'; break;
        case 0x1e: if (base >= 11) buf[n] = 'a'; break;
        case 0x30: if (base >= 12) buf[n] = 'b'; break;
        case 0x2e: if (base >= 13) buf[n] = 'c'; break;
        case 0x20: if (base >= 14) buf[n] = 'd'; break;
        case 0x12: if (base >= 15) buf[n] = 'e'; break;
        case 0x21: if (base >= 16) buf[n] = 'f'; break;
        default:
            break;
        }
        /* Don't allow anything to be entered after a suffix */
        if (n > 0 && (
                      (buf[n-1] == 'p') || (buf[n-1] == 'g') || 
                      (buf[n-1] == 'm') || (buf[n-1] == 'k'))) {
            buf[n] = ' ';
        }
        /* If we have entered a character increment n */
        if (buf[n] != ' ') {
            n++;
        }
        buf[n] = ' ';
        /* Print the current number */
        cprint(x, y, buf);

        /* Find the base we are entering numbers in */
        base = 10;
        if ((buf[0] == '0') && (buf[1] == 'x')) {
            base = 16;
        }
        else if (buf[0] == '0') {
            base = 8;
        }
    }
    /* Compute our current shift */
    shift = 0;
    switch(buf[n-1]) {
    case 'g': /* gig */  shift = 30; break;
    case 'm': /* meg */  shift = 20; break;
    case 'p': /* page */ shift = 12; break;
    case 'k': /* kilo */ shift = 10; break;
    }
    shift -= result_shift;

    /* Compute our current value */
    val = simple_strtoul(buf, 0, base);
    if (shift > 0) {
        if (shift >= 32) {
            val = 0xffffffff;
        } else {
            val <<= shift;
        }
    } else {
        if (-shift >= 32) {
            val = 0;
        }
        else {
            val >>= -shift;
        }
    }
    return val;
}

void ttyprint(int y, int x, const char *p)
{
    static char sx[3];
    static char sy[3];

    sx[0]='\0';
    sy[0]='\0';
    x++; y++;
    itoa(sx, x);
    itoa(sy, y);
    serial_echo_print("[");
    serial_echo_print(sy);
    serial_echo_print(";");
    serial_echo_print(sx);
    serial_echo_print("H");
    serial_echo_print(p);
}

void serial_echo_init(void)
{
    int comstat, serial_div;
    unsigned char lcr;	

    /* read the Divisor Latch */
    comstat = serial_echo_inb(UART_LCR);
    serial_echo_outb(comstat | UART_LCR_DLAB, UART_LCR);
    /*hi =*/ serial_echo_inb(UART_DLM);
    /*lo =*/ serial_echo_inb(UART_DLL);
    serial_echo_outb(comstat, UART_LCR);

    /* now do hardwired init */
    lcr = serial_parity | (serial_bits - 5);
    serial_echo_outb(lcr, UART_LCR); /* No parity, 8 data bits, 1 stop */
    serial_div = 115200 / serial_baud_rate;
    serial_echo_outb(0x80|lcr, UART_LCR); /* Access divisor latch */
    serial_echo_outb(serial_div & 0xff, UART_DLL);  /* baud rate divisor */
    serial_echo_outb((serial_div >> 8) & 0xff, UART_DLM);
    serial_echo_outb(lcr, UART_LCR); /* Done with divisor */

    /* Prior to disabling interrupts, read the LSR and RBR
     * registers */
    comstat = serial_echo_inb(UART_LSR); /* COM? LSR */
    comstat = serial_echo_inb(UART_RX);	/* COM? RBR */
    serial_echo_outb(0x00, UART_IER); /* Disable all interrupts */

    clear_screen_buf();

    return;
}

/*
 * Get_number of digits
 */
int getnum(ulong val)
{
    int len = 0;
    int i = 1;
	
    while(i <= val)
    {
        len++;
        i *= 10;
    }

    return len;
		
}


void serial_echo_print(const char *p)
{
    if (!serial_cons) {
        return;
    }
    /* Now, do each character */
    while (*p) {
        WAIT_FOR_XMITR;

        /* Send the character out. */
        serial_echo_outb(*p, UART_TX);
        if(*p==10) {
            WAIT_FOR_XMITR;
            serial_echo_outb(13, UART_TX);
        }
        p++;
    }
}

/* Except for multi-character key sequences this mapping
 * table is complete.  So it should not need to be updated
 * when new keys are searched for.  However the key handling
 * should really be turned around and only in get_key should
 * we worry about the exact keycode that was pressed.  Everywhere
 * else we should switch on the character...
 */
struct ascii_map_str ser_map[] =
    /*ascii keycode     ascii  keycode*/
    { 
     /* Special cases come first so I can leave
      * their ``normal'' mapping in the table,
      * without it being activated.
      */
     {  27,   0x01}, /* ^[/ESC -> ESC  */
     { 127,   0x0e}, /*    DEL -> BS   */
     {   8,   0x0e}, /* ^H/BS  -> BS   */
     {  10,   0x1c}, /* ^L/NL  -> CR   */
     {  13,   0x1c}, /* ^M/CR  -> CR   */
     {   9,   0x0f}, /* ^I/TAB -> TAB  */
     {  19,   0x39}, /* ^S     -> SP   */
     {  17,     28}, /* ^Q     -> CR   */

     { ' ',   0x39}, /*     SP -> SP   */
     { 'a',   0x1e},
     { 'A',   0x1e},
     {   1,   0x1e}, /* ^A      -> A */
     { 'b',   0x30},
     { 'B',   0x30},
     {   2,   0x30}, /* ^B      -> B */
     { 'c',   0x2e},
     { 'C',   0x2e},
     {   3,   0x2e}, /* ^C      -> C */
     { 'd',   0x20},
     { 'D',   0x20},
     {   4,   0x20}, /* ^D      -> D */
     { 'e',   0x12},
     { 'E',   0x12},
     {   5,   0x12}, /* ^E      -> E */
     { 'f',   0x21},
     { 'F',   0x21},
     {   6,   0x21}, /* ^F      -> F */
     { 'g',   0x22},
     { 'G',   0x22},
     {   7,   0x22}, /* ^G      -> G */
     { 'h',   0x23},
     { 'H',   0x23},
     {   8,   0x23}, /* ^H      -> H */
     { 'i',   0x17},
     { 'I',   0x17},
     {   9,   0x17}, /* ^I      -> I */
     { 'j',   0x24},
     { 'J',   0x24},
     {  10,   0x24}, /* ^J      -> J */
     { 'k',   0x25},
     { 'K',   0x25},
     {  11,   0x25}, /* ^K      -> K */
     { 'l',   0x26},
     { 'L',   0x26},
     {  12,   0x26}, /* ^L      -> L */
     { 'm',   0x32},
     { 'M',   0x32},
     {  13,   0x32}, /* ^M      -> M */
     { 'n',   0x31},
     { 'N',   0x31},
     {  14,   0x31}, /* ^N      -> N */
     { 'o',   0x18},
     { 'O',   0x18},
     {  15,   0x18}, /* ^O      -> O */
     { 'p',   0x19},
     { 'P',   0x19},
     {  16,   0x19}, /* ^P      -> P */
     { 'q',   0x10},
     { 'Q',   0x10},
     {  17,   0x10}, /* ^Q      -> Q */
     { 'r',   0x13},
     { 'R',   0x13},
     {  18,   0x13}, /* ^R      -> R */
     { 's',   0x1f},
     { 'S',   0x1f},
     {  19,   0x1f}, /* ^S      -> S */
     { 't',   0x14},
     { 'T',   0x14},
     {  20,   0x14}, /* ^T      -> T */
     { 'u',   0x16},
     { 'U',   0x16},
     {  21,   0x16}, /* ^U      -> U */
     { 'v',   0x2f},
     { 'V',   0x2f},
     {  22,   0x2f}, /* ^V      -> V */
     { 'w',   0x11},
     { 'W',   0x11},
     {  23,   0x11}, /* ^W      -> W */
     { 'x',   0x2d},
     { 'X',   0x2d},
     {  24,   0x2d}, /* ^X      -> X */
     { 'y',   0x15},
     { 'Y',   0x15},
     {  25,   0x15}, /* ^Y      -> Y */
     { 'z',   0x2c},
     { 'Z',   0x2c},
     {  26,   0x2c}, /* ^Z      -> Z */
     { '-',   0x0c},
     { '_',   0x0c},
     {  31,   0x0c}, /* ^_      -> _ */
     { '=',   0x0c},
     { '+',   0x0c},
     { '[',   0x1a},
     { '{',   0x1a},
     {  27,   0x1a}, /* ^[      -> [ */
     { ']',   0x1b},
     { '}',   0x1b},
     {  29,   0x1b}, /* ^]      -> ] */
     { ';',   0x27},
     { ':',   0x27},
     { '\'',  0x28},
     { '"',   0x28},
     { '`',   0x29},
     { '~',   0x29},
     { '\\',  0x2b},
     { '|',   0x2b},
     {  28,   0x2b}, /* ^\      -> \ */
     { ',',   0x33},
     { '<',   0x33},
     { '.',   0x34},
     { '>',   0x34},
     { '/',   0x35},
     { '?',   0x35},
     { '1',   0x02},
     { '!',   0x02},
     { '2',   0x03},
     { '@',   0x03},
     { '3',   0x04},
     { '#',   0x04},
     { '4',   0x05},
     { '$',   0x05},
     { '5',   0x06},
     { '%',   0x06},
     { '6',   0x07},
     { '^',   0x07},
     {  30,   0x07}, /* ^^      -> 6 */
     { '7',   0x08},
     { '&',   0x08},
     { '8',   0x09},
     { '*',   0x09},
     { '9',   0x0a},
     { '(',   0x0a},
     { '0',   0x0b},
     { ')',   0x0b},
     {   0,      0}
    };

/*
 * Given an ascii character, return the keycode
 *
 * Uses ser_map definition above.
 *
 * It would be more efficient to use an array of 255 characters
 * and directly index into it.
 */
int ascii_to_keycode (int in)
{
    struct ascii_map_str *p;
    for (p = ser_map; p->ascii; p++) {
        if (in ==p->ascii)
            return p->keycode;
    }
    return 0;
}

/*
 * Call this when you want to wait for the user to lift the
 * finger off of a key.  It is a noop if you are using a
 * serial console.
 */
void wait_keyup( void ) {
    /* Check to see if someone lifted the keyboard key */
    while (1) {
        if ((get_key() & 0x80) != 0) {
            return;
        }
        /* Trying to simulate waiting for a key release with
         * the serial port is to nasty to let live.
         * In particular some menus don't even display until
         * you release the key that caused to to get there.
         * With the serial port this results in double pressing
         * or something worse for just about every key.
         */
        if (serial_cons) {
            return;
        }
    }
}

/*
 * Handles "console=<param>" command line option
 *
 * Examples of accepted params:
 *   ttyS0
 *   ttyS1
 *   ttyS0,115200
 *   ttyS0,9600e8
 */
void serial_console_setup(char *param)
{
    char *option, *end;
    unsigned long tty;
    unsigned long baud_rate;
    unsigned char parity, bits;

    if (mt86_strncmp(param, "ttyS", 4))
        return;   /* not a serial port */

    param += 4;

    tty = simple_strtoul(param, &option, 10);

    if (option == param)
        return;   /* there were no digits */

    if (tty > 1)
        return;   /* only ttyS0 and ttyS1 supported */

    if (*option == '\0' || *option == ' ')
        goto save_tty; /* no options given, just ttyS? */

    if (*option != ',')
        return;  /* missing the comma separator */

    /* baud rate must follow */
    option++;
    baud_rate = simple_strtoul(option, &end, 10);

    if (end == option)
        return;  /* no baudrate after comma */

    if (baud_rate == 0 || (115200 % baud_rate) != 0)
        return;  /* wrong baud rate */

    if (*end == '\0' || *end == ' ')
        goto save_baud_rate;  /* no more options given */

    switch (toupper(*end)) {
    case 'N':
        parity = 0;
        break;
    case 'O':
        parity = UART_LCR_PARITY;
        break;
    case 'E':
        parity = UART_LCR_PARITY | UART_LCR_EPAR;
        break;
    default:
        /* Unknown parity */
        return;
    }

    end++;
    if (*end == '\0' || *end == ' ')
        goto save_parity;

    /* word length (bits) */
    if (*end < '7' || *end > '8')
        return;  /* invalid number of bits */

    bits = *end - '0';

    end++;

    if (*end != '\0' || *end != ' ')
        return;  /* garbage at the end */

    serial_bits = bits;
 save_parity:
    serial_parity = parity;
 save_baud_rate:
    serial_baud_rate = (int) baud_rate;
 save_tty:
    serial_tty = (short) tty;
    serial_cons = 1;
}

/* Get a comma seperated list of numbers */
void get_list(int x, int y, int len, char *buf)
{
    int c, n = 0;

    len--;
    wait_keyup();
    while(1) {
        /* Read a new character and process it */
        c = get_key();
        switch(c) {
        case 0x1c: /* CR */
            /* If something has been entered we are done */
            if(n) {
                buf[n] = 0;
                return;
            }
            break;
        case 0x0e: /* BS */
            if (n > 0) {
                n -= 1;
                buf[n] = ' ';
            }
            break;
        case 0x0B: buf[n++] = '0'; break;
        case 0x02: buf[n++] = '1'; break;
        case 0x03: buf[n++] = '2'; break;
        case 0x04: buf[n++] = '3'; break;
        case 0x05: buf[n++] = '4'; break;
        case 0x06: buf[n++] = '5'; break;
        case 0x07: buf[n++] = '6'; break;
        case 0x08: buf[n++] = '7'; break;
        case 0x09: buf[n++] = '8'; break;
        case 0x0a: buf[n++] = '9'; break;
        case 0x33: buf[n++] = ','; break;
        }
        cprint(x, y, buf);
        if (n >= len) {
            buf[n] = 0;
            return;
        }
    }
}