De-dracutize service-scripts, try to use ash where applicable

9 files changed, 212 insertions, 227 deletions

diff --git a/modules.d/conf-tgz/hooks/s3-fetch-config-tgz.sh b/modules.d/conf-tgz/hooks/s3-fetch-config-tgz.sh
index 2ed5f579..1d032a19 100755
--- a/modules.d/conf-tgz/hooks/s3-fetch-config-tgz.sh
+++ b/modules.d/conf-tgz/hooks/s3-fetch-config-tgz.sh
@@ -1,27 +1,27 @@
-#!/usr/bin/env bash
+#!/bin/ash
 # -*- coding: utf-8 -*-
 
-type emergency_shell >/dev/null 2>&1 || source /lib/dracut-lib.sh
-
 . /etc/openslx
 
-if [ -z "$SLX_NO_CONFIG_TGZ" ]; then
-	# build config.tgz url from SLX_KCL_SERVERS and SLX_BASE_PATH
-	# both are written to /etc/openslx by dnbd3-rootfs's s3-fetch-config.sh script
-	conftgz_url="http://${SLX_KCL_SERVERS}/${SLX_BASE_PATH}/config.tgz"
+[ -n "$SLX_NO_CONFIG_TGZ" ] && exit 0
 
-	# check if system's uuid was set
-	if [ -s "/run/system-uuid" ]; then
-		uuid="$(cat /run/system-uuid)"
-		if [ -n "$uuid" ]; then
-			conftgz_url="${conftgz_url}?uuid=${uuid}"
-		fi
-	fi
-	info "Download config.tgz from '$conftgz_url'..."
-	slx-tools download_retry --slx-time 20 -sS "${conftgz_url}" > "/etc/config.tgz"
+# build config.tgz url from SLX_KCL_SERVERS and SLX_BASE_PATH
+# both are written to /etc/openslx by dnbd3-rootfs's s3-fetch-config.sh script
+conftgz_url="http://${SLX_KCL_SERVERS}/${SLX_BASE_PATH}/config.tgz"
 
-	if [[ ! -s "/etc/config.tgz" ]]; then
-		warn "Failed to download '${conftgz_url}'!"
+# check if system's uuid was set
+if [ -s "/run/system-uuid" ]; then
+	uuid="$(cat /run/system-uuid)"
+	if [ -n "$uuid" ]; then
+		conftgz_url="${conftgz_url}?uuid=${uuid}"
 	fi
 fi
-:
+echo "Download config.tgz from '$conftgz_url'..."
+slx-tools download_retry --slx-time 20 -sS "${conftgz_url}" > "/etc/config.tgz"
+
+if ! [ -s "/etc/config.tgz" ]; then
+	echo "Failed to download '${conftgz_url}'"
+	exit 1
+fi
+
+exit 0
diff --git a/modules.d/conf-tgz/hooks/s3-unpack-config-tgz.sh b/modules.d/conf-tgz/hooks/s3-unpack-config-tgz.sh
index 2132423c..0ab877dd 100755
--- a/modules.d/conf-tgz/hooks/s3-unpack-config-tgz.sh
+++ b/modules.d/conf-tgz/hooks/s3-unpack-config-tgz.sh
@@ -1,58 +1,58 @@
-#!/usr/bin/env bash
+#!/bin/ash
 # -*- coding: utf-8 -*-
 
-type emergency_shell >/dev/null 2>&1 || source /lib/dracut-lib.sh
-
 # tarcopy <source_dir> <target_dir>
-tarcopy() {
-	[ -d "$1" -a -d "$2" ] || return 1
-	cd "$1"
+tarcopy() (
+	if ! [ -d "$1" ] || ! [ -d "$2" ]; then
+		echo "'$1' or '$2' is not a directory"
+		return 1
+	fi
+	cd "$1" || return 1
 	local filelist="$(mktemp)"
 	find . \! -type d > "$filelist"
-	tar -c -p -T "$filelist" | tar -xp -C "$2"
+	if [ -s "$filelist" ]; then
+		tar -c -p -T "$filelist" | tar -xp -C "$2" || return 1
+	fi
 	rm -f -- "$filelist"
-	cd - &>/dev/null
-}
+	return 0
+)
 
-unpack_config_tgz() {
-	local config_tgz="/etc/config.tgz"
-	[ -e "$config_tgz" ] || return 1
-	# create list of overwritten files for debugging purposes
-	mkdir -p "${NEWROOT}/opt/openslx"
-	tar \
-		--list \
-		--verbose \
-		--file="$config_tgz" \
-		> "${NEWROOT}/opt/openslx/config.tgz.list" 2>&1
-	local extract_dir="$(mktemp -d)"
-	tar \
+config_tgz="/etc/config.tgz"
+[ -e "$config_tgz" ] || exit 1
+# create list of overwritten files for debugging purposes
+mkdir -p "${NEWROOT}/opt/openslx"
+tar \
+	--list \
+	--verbose \
+	--file="$config_tgz" \
+	> "${NEWROOT}/opt/openslx/config.tgz.list" 2>&1
+extract_dir="$(mktemp -d)"
+if ! tar \
 		--extract \
 		--preserve-permissions \
 		--file="$config_tgz" \
-		--directory="$extract_dir"
-	if [ "$?" -ne 0 ]; then
-		warn "Failed to extract '$config_tgz' to '$extract_dir'."
-		return 1
+		--directory="$extract_dir"; then
+	echo "Failed to extract '$config_tgz' to '$extract_dir'."
+	exit 1
+fi
+# check SLX_LOCAL_CONFIGURATION
+. "/etc/openslx"
+if [ -n "$SLX_LOCAL_CONFIGURATION" ]; then
+	if ! [ -d "${extract_dir}/openslx-configs/${SLX_LOCAL_CONFIGURATION}" ]; then
+		echo "Ignoring missing SLX_LOCAL_CONFIGURATION in '$config_tgz'."
+	else
+		tarcopy \
+			"${extract_dir}/openslx-configs/${SLX_LOCAL_CONFIGURATION}" \
+			"${extract_dir}"
 	fi
-	# check SLX_LOCAL_CONFIGURATION
-	source "/etc/openslx"
-	if [ -n "$SLX_LOCAL_CONFIGURATION" ]; then
-		if [ ! -d "${extract_dir}/openslx-configs/${SLX_LOCAL_CONFIGURATION}" ]; then
-			warn "Ignoring missing SLX_LOCAL_CONFIGURATION in '$config_tgz'."
-		else
-			tarcopy \
-				"${extract_dir}/openslx-configs/${SLX_LOCAL_CONFIGURATION}" \
-				"${extract_dir}"
-		fi
-	fi
-	# always purge openslx-configs/
-	rm -rf "${extract_dir}/openslx-configs"
+fi
+# always purge openslx-configs/
+rm -rf "${extract_dir}/openslx-configs"
 
-	# finally copy the rest into stage4
-	if ! tarcopy "${extract_dir}" "$NEWROOT"; then
-		warn "'tarcopy' from '$extract_dir' to '$NEWROOT' failed."
-	fi
-}
+# finally copy the rest into stage4
+if ! tarcopy "${extract_dir}" "$NEWROOT"; then
+	echo "'tarcopy' from '$extract_dir' to '$NEWROOT' failed."
+	exit 1
+fi
 
-unpack_config_tgz
-:
+exit 0
diff --git a/modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh b/modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh
index 01a8c32c..47217c29 100755
--- a/modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh
+++ b/modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh
@@ -17,17 +17,17 @@ container_unpack_xmount() {
     mkdir -p "$out_path"
     # check tools first
     if ! hash xmount systemd-preserve-process-marker; then
-        warn "Missing xmount deps, will try raw..." 1>&2
+        echo "Missing xmount deps, will try raw..." 1>&2
     elif ! systemd-preserve-process-marker xmount \
             --in qemu "$in_device" \
             --out raw "$out_path" &>/dev/null; then
-        warn "xmount call failed, assuming raw image." 1>&2
+        echo "xmount call failed, assuming raw image." 1>&2
     else
         in_device="${out_path}/${_dnbd3_dev##*/}.dd"
     fi
     local out_device="$(losetup -f)"
     if ! losetup "$out_device" "$in_device" --partscan; then
-        warn "Failed to attach '$in_device' to '$out_device'."
+        echo "Failed to attach '$in_device' to '$out_device'."
         return 1
     fi
     udevadm settle
@@ -39,11 +39,11 @@ container_unpack_xloop() {
     local out_device="$(xlosetup -f)"
     for kmod in xloop xloop_file_fmt_qcow xloop_file_fmt_raw; do
         if ! modprobe "${kmod}"; then
-            warn "Failed to load kernel module: $kmod"
+            echo "Failed to load kernel module: $kmod"
         fi
     done
     if ! xlosetup -r -t QCOW "$out_device" "$in_device" --partscan; then
-        warn "Failed to attach '$in_device' to '$out_device'."
+        echo "Failed to attach '$in_device' to '$out_device'."
         return
     fi
     udevadm settle
@@ -74,7 +74,7 @@ if [ -n "$SLX_DNBD3_RID" ]; then
 fi
 
 if ! modprobe dnbd3; then
-    warn "Failed to load kernel module: dnbd3"
+    echo "Failed to load kernel module: dnbd3"
 fi
 
 for try in {1..5} ""; do
@@ -85,7 +85,7 @@ for try in {1..5} ""; do
             "Check if the image exists on one of the servers" \
             "and if any is reachable from this client."
     fi
-    info "Trying hosts '$SLX_DNBD3_SERVERS'."
+    echo "Trying hosts '$SLX_DNBD3_SERVERS'."
     if dnbd3-client \
             --host "$SLX_DNBD3_SERVERS" \
             --image "$SLX_DNBD3_IMAGE" \
@@ -138,12 +138,12 @@ else
     eval "$SLX_SYSTEM_PARTITION_PREPARATION_SCRIPT"
 fi
 if [[ -z "$read_only_partition" ]]; then
-    warn "Failed to find unique device with identifier" \
+    echo "Failed to find unique device with identifier" \
         "\"${SLX_SYSTEM_PARTITION_IDENTIFIER}\"; matched devices:" \
         "\"${read_only_partition}\""
     exit 1
 fi
-info "Using read-only partition: $read_only_partition"
+echo "Using read-only partition: $read_only_partition"
 # endregion
 
 # region add rw layer to dnbd3 image
diff --git a/modules.d/slx-addons/hooks/s3-setup-addons.sh b/modules.d/slx-addons/hooks/s3-setup-addons.sh
index 0a947f23..495e3799 100755
--- a/modules.d/slx-addons/hooks/s3-setup-addons.sh
+++ b/modules.d/slx-addons/hooks/s3-setup-addons.sh
@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 #
 # Stage4 addons setup script
 #
@@ -25,12 +25,10 @@
 #         or by chroot'ing into the stage4 before executing it.
 ### CURRENTLY NOT EXECUTED: Since whiteouts could be handled for _all_addons
 
-type emergency_shell >/dev/null 2>&1 || . /lib/dracut-lib.sh
-
 # Check if we even have any addons to process
-if [ ! -d "$NEWROOT/opt/openslx/addons" ]; then
-	info "No stage4 addons found."
-	return 0
+if ! [ -d "$NEWROOT/opt/openslx/addons" ]; then
+	echo "No stage4 addons found."
+	exit 0
 fi
 
 # This just activates the ldconfig service to run during the sysinit target
@@ -47,13 +45,13 @@ activate_stage4_ldconfig() {
 
 setup_addon() {
 	if [ ! -d "$1" ]; then
-		warn "Given '$1' not a directory, skipping."
+		echo "Given '$1' not a directory, skipping."
 		return 1
 	fi
 	local addon_dir="$1"
 	cd "$addon_dir" || return 1
 	if ! bash addon-required 2>&1 ; then
-		info "'$addon_dir/addon-required' missing or returned non-zero, skipping..."
+		echo "'$addon_dir/addon-required' missing or returned non-zero, skipping..."
 		return 1
 	fi
 	# purge addon-* files
@@ -82,7 +80,7 @@ active=()
 for addon in "${NEWROOT}/opt/openslx/addons/"*; do
 	if setup_addon "$addon"; then
 		active+=("${addon#"${NEWROOT}/opt/openslx/addons/"}")
-		info "Activated '$addon' (@ $(date +%s))"
+		echo "Activated '$addon' (@ $(date +%s))"
 	fi
 done
 
@@ -91,13 +89,13 @@ done
 if [ "${#active[@]}" -eq 1 ]; then
 	addon_cache="${NEWROOT}/opt/openslx/etc/${active[0]}.ld.so.cache"
 	if [ -e "$addon_cache" ]; then
-		info "Using ld.so.cache of '${active[0]}'."
+		echo "Using ld.so.cache of '${active[0]}'."
 		mv -f -- "${NEWROOT}/etc/ld.so.cache"{,.stage4}
 		mv -f -- "$addon_cache" "${NEWROOT}/etc/ld.so.cache"
 	fi
 elif [ "${#active[@]}" -gt 1 ]; then
-	info "Activating ldconfig in stage4 due to multiple loaded addons: ${active[*]}"
+	echo "Activating ldconfig in stage4 due to multiple loaded addons: ${active[*]}"
 	activate_stage4_ldconfig
 fi
 
-:
+exit 0
diff --git a/modules.d/slx-drm/hooks/s3-activate-nvidia-drivers.sh b/modules.d/slx-drm/hooks/s3-activate-nvidia-drivers.sh
index 00c2334a..28b0c639 100755
--- a/modules.d/slx-drm/hooks/s3-activate-nvidia-drivers.sh
+++ b/modules.d/slx-drm/hooks/s3-activate-nvidia-drivers.sh
@@ -1,42 +1,37 @@
-#!/bin/bash
+#!/bin/ash
 
-type emergency_shell >/dev/null 2>&1 || . /lib/dracut-lib.sh
-
-detect_nvidia_cards() {
-	# hard check on nvidia graphic cards
-	local cards="$( lspci -n | grep -o ' 03..: 10de:....' | awk '{print $2}' )"
-	if ! [ -d "/drm.cfg.d" ] && [ -n "$cards" ]; then
-		warn "Failed to find '/drm.cfg.d', but have nvidia cards - will try nouveau."
-		return 1
+# hard check on nvidia graphic cards
+cards="$( lspci -n | grep -o ' 03..: 10de:....' | awk '{print $2}' )"
+if ! [ -d "/drm.cfg.d" ] && [ -n "$cards" ]; then
+	echo "Failed to find '/drm.cfg.d', but have nvidia cards - will try nouveau."
+	exit 1
+fi
+for card in $cards; do
+	driver="$(awk '$1 = /'"$card"'/ {print $2; exit}'  /drm.cfg.d/*)"
+	[ -z "$driver" ] && continue
+	driver="${driver#'@'}"
+	driver="${driver//-/\/}"
+	driver_dir="/lib/modules/${driver}"
+	[ -d "$driver_dir" ] || continue
+	driver_target="/lib/modules/$(uname -r)/kernel/drivers/gpu/drm/nvidia"
+	if [ -d "$driver_target" ]; then
+		echo "'$driver_target' exists, will not overwrite!"
+		exit 1
+	fi
+	# all good, move it over
+	if ! mv "$driver_dir" "$driver_target" 2>&1; then
+		echo "Failed to move '$driver_dir' to '$driver_target'."
+		exit 1
+	fi
+	# finally run depmod to make it visible to udev
+	if ! depmod -a 2>&1 ; then
+		echo "Failed to run depmod, udev won't see the nvidia modules."
+		exit 1
 	fi
-	for card in $cards; do
-		local driver="$(awk '$1 = /'"$card"'/ {print $2; exit}'  /drm.cfg.d/*)"
-		[ -z "$driver" ] && continue
-		driver="${driver#'@'}"
-		driver="${driver//-/\/}"
-		local driver_dir="/lib/modules/${driver}"
-		[ -d "$driver_dir" ] || continue
-		local driver_target="/lib/modules/$(uname -r)/kernel/drivers/gpu/drm/nvidia"
-		if [ -d "$driver_target" ]; then
-			warn "'$driver_target' exists, will not overwrite!"
-			return 1
-		fi
-		# all good, move it over
-		if ! mv "$driver_dir" "$driver_target" 2>&1; then
-			warn "Failed to move '$driver_dir' to '$driver_target'."
-			return 1
-		fi
-		# finally run depmod to make it visible to udev
-		if ! depmod -a 2>&1 ; then
-			warn "Failed to run depmod, udev won't see the nvidia modules."
-			return 1
-		fi
-		# blacklist nouveau
-		echo 'blacklist nouveau' > "/lib/modprobe.d/disable-nouveau.conf"
-		info "Initialized nvidia drivers."
-		return 0
-	done
-}
+	# blacklist nouveau
+	echo 'blacklist nouveau' > "/lib/modprobe.d/disable-nouveau.conf"
+	echo "Initialized nvidia drivers."
+	break
+done
 
-detect_nvidia_cards
-:
+exit 0
diff --git a/modules.d/slx-drm/hooks/s3-copy-nvidia-drivers.sh b/modules.d/slx-drm/hooks/s3-copy-nvidia-drivers.sh
index 5afc71c7..f0b9f763 100755
--- a/modules.d/slx-drm/hooks/s3-copy-nvidia-drivers.sh
+++ b/modules.d/slx-drm/hooks/s3-copy-nvidia-drivers.sh
@@ -1,19 +1,17 @@
-#!/bin/bash
+#!/bin/ash
 #
 # This script checks whether the nvidia kernel module was loaded by udev
 # and copies the kernel modules over to stage4 and disables nouveau
 
-type emergency_shell >/dev/null 2>&1 || . /lib/dracut-lib.sh
-
 copy_nvidia_modules() {
 	local nvidia_moddir="/lib/modules/$(uname -r)/kernel/drivers/gpu/drm/nvidia"
 	if [ -d "${NEWROOT}/${nvidia_moddir}" ]; then
-		warn "Stage4 contains nvidia driver which would be overwritten - skipping."
+		echo "Stage4 contains nvidia driver which would be overwritten - skipping."
 		return 1
 	fi
 	if ! ( cp -r "$nvidia_moddir" "${NEWROOT}/${nvidia_moddir}" \
 				&& depmod -a -b "$NEWROOT" ); then
-		warn "Failed to copy/depmod nvidia modules to stage4."
+		echo "Failed to copy/depmod nvidia modules to stage4."
 		return 1
 	fi
 	# nouveau driver would needlessly load, prevent that
@@ -22,7 +20,8 @@ copy_nvidia_modules() {
 	return 0
 }
 
-if lsmod | grep -q '^nvidia'; then
-	copy_nvidia_modules
+if ! lsmod | grep -q '^nvidia'; then
+	exit 0
 fi
-: # fake success
+
+copy_nvidia_modules
diff --git a/modules.d/slx-network/hooks/s3-copy-network-files.sh b/modules.d/slx-network/hooks/s3-copy-network-files.sh
index 5d28669e..46f4ab38 100755
--- a/modules.d/slx-network/hooks/s3-copy-network-files.sh
+++ b/modules.d/slx-network/hooks/s3-copy-network-files.sh
@@ -1,31 +1,30 @@
-#!/bin/bash
+#!/bin/ash
 
-type -p warn &> /dev/null || . /lib/dracut-lib.sh
+# backup network configuration files found in stage4, copy ours
+for file in "hostname" "hosts" "resolv.conf"; do
+	file="/etc/$file"
+	if ! [ -e "$file" ]; then
+		echo "Missing '$file' - can't move it to stage4. "
+		continue
+	fi
+	if [ -e "${NEWROOT}/${file}" ] || [ -h "${NEWROOT}/${file}" ]; then
+		mv "${NEWROOT}/${file}" "${NEWROOT}/${file}.renamed-by-stage3"
+	fi
+	cp -af -- "$file" "${NEWROOT}${file}"
+done
 
-if [ -n "$NEWROOT" ]; then
-	# backup network configuration files found in stage4
-	for file in /etc/{hostname,hosts,resolv.conf}; do
-		if [ ! -e "$file" ]; then
-			warn "Missing '$file' - can't move it to stage4. "
-			continue
-		fi
-		if [ -e "${NEWROOT}/${file}" ] || [ -h "${NEWROOT}/${file}" ]; then
-			mv "${NEWROOT}/${file}" "${NEWROOT}/${file}.renamed-by-stage3"
-		fi
-		cp -af "$file" "${NEWROOT}/etc/"
-	done
-	# special handling for resolv.conf:
-	# move it to /opt/openslx to detect we are managing it
-	mkdir -p "${NEWROOT}/opt/openslx"
-	mv "${NEWROOT}/etc/resolv.conf" "${NEWROOT}/opt/openslx/resolv.conf"
-	ln -s "/opt/openslx/resolv.conf" "${NEWROOT}/etc/resolv.conf"
+# special handling for resolv.conf:
+# move it to /opt/openslx to detect we are managing it
+mkdir -p "${NEWROOT}/opt/openslx"
+mv "${NEWROOT}/etc/resolv.conf" "${NEWROOT}/opt/openslx/resolv.conf"
+ln -nfs "/opt/openslx/resolv.conf" "${NEWROOT}/etc/resolv.conf"
 
-	# HACK: finally make sure we have rdns helper
-	# This should be done more elegantly one day...
-	rdns="$(type -p rdns)"
-	if [ -n "$rdns" ]; then
-		mkdir -p "${NEWROOT}/opt/openslx/bin"
-		cp -f "$rdns" "${NEWROOT}/opt/openslx/bin"
-	fi
+# HACK: finally make sure we have rdns helper
+# This should be done more elegantly one day...
+rdns="$( command -p rdns )"
+if [ -n "$rdns" ]; then
+	mkdir -p "${NEWROOT}/opt/openslx/bin"
+	cp -f "$rdns" "${NEWROOT}/opt/openslx/bin"
 fi
-true
+
+exit 0
diff --git a/modules.d/slx-network/hooks/s3-setup-bootif-network.sh b/modules.d/slx-network/hooks/s3-setup-bootif-network.sh
index 6b75170d..1aeac9b6 100755
--- a/modules.d/slx-network/hooks/s3-setup-bootif-network.sh
+++ b/modules.d/slx-network/hooks/s3-setup-bootif-network.sh
@@ -70,7 +70,7 @@ wait_for_iface() {
 set -x
 
 if ! wait_for_iface "$SLX_PXE_NETIF" 30; then
-	warn "'$SLX_PXE_NETIF' still not up after 30sec ... trying anyway."
+	echo "'$SLX_PXE_NETIF' still not up after 30sec ... trying anyway."
 	# TODO handle case where we waited for 30sec and it is still not up
 fi
 
@@ -78,14 +78,14 @@ fi
 MAIN_NETIF="$SLX_PXE_NETIF"
 if [ -n "$SLX_VLAN_ID" ]; then
 	# create VLAN interface
-	modprobe 8021q || warn "Loading '8021q' failed - missing module?"
+	modprobe 8021q || echo "Loading '8021q' failed - missing module?"
 	ip link add link "$SLX_PXE_NETIF" name "${SLX_PXE_NETIF}.${SLX_VLAN_ID}" \
 		type vlan id "$SLX_VLAN_ID"
 	ip link set dev "${SLX_PXE_NETIF}.${SLX_VLAN_ID}" up
 	if wait_for_iface "${SLX_PXE_NETIF}.${SLX_VLAN_ID}"; then
 		MAIN_NETIF="${SLX_PXE_NETIF}.${SLX_VLAN_ID}"
 	else
-		warn "Setting up VLAN '$SLX_VLAN_ID' failed, trying plain..."
+		echo "Setting up VLAN '$SLX_VLAN_ID' failed, trying plain..."
 	fi
 fi
 
@@ -110,7 +110,7 @@ if [ -n "$SLX_BRIDGE" ]; then
 			emergency_shell "Failed to setup main network bridge, giving up!"
 			exit 1
 		fi
-		warn "Failed to setup main network bridge on try $try. Retrying ..."
+		echo "Failed to setup main network bridge on try $try. Retrying ..."
 		# delete bridge, inc try and sleep 100ms before trying again
 		if [ -e "/sys/class/net/${SLX_BRIDGE}" ]; then
 			ip link set dev "$SLX_BRIDGE" down
@@ -128,14 +128,14 @@ if [ -n "$SLX_PXE_CLIENT_IP" ] && [ -n "$SLX_PXE_NETMASK" ]; then
 
 	# now if we got everything from the KCL and skip dhcp if so
 	if [ -n "$SLX_PXE_GATEWAY" ] && [ -n "$SLX_PXE_DNS" ]; then
-		info "Got network configuration from KCL, skipping DHCP."
+		echo "Got network configuration from KCL, skipping DHCP."
 		if ! interface="$MAIN_NETIF" \
 			ip="$SLX_PXE_CLIENT_IP" \
 			router="$SLX_PXE_GATEWAY" \
 			dns="$SLX_PXE_DNS" \
 			hostname="$SLX_PXE_HOSTNAME" \
 			/usr/local/bin/udhcpc-trigger bound; then
-			warn "Failed to launch DHCP trigger with KCL configuration - will DHCP."
+			echo "Failed to launch DHCP trigger with KCL configuration - will DHCP."
 		fi
 		exit 0
 	fi
@@ -182,7 +182,7 @@ for i in 1 1 1 fail; do
 		-s "/usr/local/bin/udhcpc-trigger" \
 		&& break
 	# failed, keep trying...
-	warn "DHCP failed, retrying in $i sec..."
+	echo "DHCP failed, retrying in $i sec..."
 	sleep $i
 done
 
diff --git a/modules.d/slx-uuid/hooks/s3-get-system-uuid.sh b/modules.d/slx-uuid/hooks/s3-get-system-uuid.sh
index e65a3394..e97a0e18 100755
--- a/modules.d/slx-uuid/hooks/s3-get-system-uuid.sh
+++ b/modules.d/slx-uuid/hooks/s3-get-system-uuid.sh
@@ -1,71 +1,65 @@
-#!/usr/bin/env bash
-#
+#!/bin/ash
+
 # Slighty changed version of:
 # http://git.openslx.org/openslx-ng/mltk.git/plain/core/modules/system-uuid/data/bin/get-uuid
 
-. /lib/dracut-lib.sh
-
-get_system_uuid() {
-	if [ -e /run/openslx/network.conf ]; then
-		. /run/openslx/network.conf
-	else
-		echo "Don't have /run/openslx/network.conf"
-	fi
+if [ -e /run/openslx/network.conf ]; then
+	. /run/openslx/network.conf
+else
+	echo "Don't have /run/openslx/network.conf"
+fi
 
-	if [ -z "$SLX_PXE_MAC" ]; then
-		warn "Getting MAC from /run/openslx/network.conf failed, using 'ip a'..."
-		for iface in "${SLX_BRIDGE:-br0}" boot0 eth0; do
-			BOOTIF=01-$(ip a | grep -A 1 ": ${iface}" | grep -o 'ether ..:..:..:..:..:..' | cut -d' ' -f2 | sed s/:/-/g)
-			[ "${#BOOTIF}" -eq "20" ] && break
-		done
-		if [ "${#BOOTIF}" -ne "20" ]; then
-			warn "Getting MAC from 'ip a' failed, using bogus value..."
-			BOOTIF="99-88-77-66-55-44-33"
-		fi
-	else
-		BOOTIF="01-$(tr ':' '-' <<< $SLX_PXE_MAC)"
+if [ -z "$SLX_PXE_MAC" ]; then
+	echo "Getting MAC from /run/openslx/network.conf failed, using 'ip a'..."
+	for iface in "${SLX_BRIDGE:-br0}" boot0 eth0; do
+		BOOTIF=01-$(ip a | grep -A 1 ": ${iface}" | grep -o 'ether ..:..:..:..:..:..' | cut -d' ' -f2 | sed s/:/-/g)
+		[ "${#BOOTIF}" -eq "20" ] && break
+	done
+	if [ "${#BOOTIF}" -ne "20" ]; then
+		echo "Getting MAC from 'ip a' failed, using bogus value..."
+		BOOTIF="99-88-77-66-55-44-33"
 	fi
+else
+	BOOTIF="01-$( echo "$SLX_PXE_MAC" | tr ':' '-' )"
+fi
 
-	local UUID=$(dmidecode -q -s system-uuid | grep -v '^#' | head -n 1 | tr 'a-z' 'A-Z')
-	if [ "${#UUID}" -ne "36" ]; then
-		warn "Determined UUID (${UUID}) has not expected length of 36, falling back to MAC..."
-		# Maybe use /proc/sys/kernel/random/uuid ?
+UUID=$(dmidecode -q -s system-uuid | grep -v '^#' | head -n 1 | tr 'a-z' 'A-Z')
+if [ "${#UUID}" -ne "36" ]; then
+	echo "Determined UUID (${UUID}) has not expected length of 36, falling back to MAC..."
+	# Maybe use /proc/sys/kernel/random/uuid ?
+	UUID=
+else
+	# Got UUID, check blacklist
+	DIR="/etc/bad-uuid.d"
+	TMPLIST=$(mktemp)
+	BADLIST=$(mktemp)
+	for file in "$DIR"/*; do
+		[ -f "$file" ] || continue
+		# 11111111-2222-3333-4444-555555555555
+		< "$file" tr 'a-z' 'A-Z' | grep -Eo '[0-9A-F]{8}-[0-9A-F]{4}-[0-9A-F]{4}-[0-9A-F]{4}-[0-9A-F]{12}'
+	done | tee "$TMPLIST" > "$BADLIST"
+	# Also add flipped version of bad uuids. Found some of them through googling and discovered that sometimes
+	# users report them in a different order. UUIDs use different endianness for the first three blocks than
+	# the remaining two, but some tools seem to ignore that fact.
+	< "$BADLIST" sed -r 's/^(..)(..)(..)(..)\-(..)(..)\-(..)(..)\-([0-9A-F]{4}\-[0-9A-F]{12})$/\4\3\2\1-\6\5-\8\7-\9/' >> "$TMPLIST"
+	# Finally make unique
+	sort -u "$TMPLIST" > "$BADLIST"
+	if grep -Fxq "$UUID" "$BADLIST"; then
+		echo "WARNING: UUID is blacklisted as potentially not being unique, using MAC fallback"
 		UUID=
-	else
-		# Got UUID, check blacklist
-		local DIR="/etc/bad-uuid.d"
-		local TMPLIST=$(mktemp)
-		local BADLIST=$(mktemp)
-		for file in "$DIR"/*; do
-			[ -f "$file" ] || continue
-			# 11111111-2222-3333-4444-555555555555
-			< "$file" tr 'a-z' 'A-Z' | grep -Eo '[0-9A-F]{8}-[0-9A-F]{4}-[0-9A-F]{4}-[0-9A-F]{4}-[0-9A-F]{12}'
-		done | tee "$TMPLIST" > "$BADLIST"
-		# Also add flipped version of bad uuids. Found some of them through googling and discovered that sometimes
-		# users report them in a different order. UUIDs use different endianness for the first three blocks than
-		# the remaining two, but some tools seem to ignore that fact.
-		< "$BADLIST" sed -r 's/^(..)(..)(..)(..)\-(..)(..)\-(..)(..)\-([0-9A-F]{4}\-[0-9A-F]{12})$/\4\3\2\1-\6\5-\8\7-\9/' >> "$TMPLIST"
-		# Finally make unique
-		sort -u "$TMPLIST" > "$BADLIST"
-		if grep -Fxq "$UUID" "$BADLIST"; then
-			warn "WARNING: UUID is blacklisted as potentially not being unique, using MAC fallback"
-			UUID=
-		fi
-		rm -f -- "$TMPLIST" "$BADLIST"
 	fi
+	rm -f -- "$TMPLIST" "$BADLIST"
+fi
 
-	if [ -z "$UUID" ]; then
-		UUID=$( echo "$BOOTIF" | sed -r 's/[^0-9A-Fa-f]//g' )
-		[ "${#UUID}" -eq 14 ] && UUID="${UUID:2}"
-		if [ "${#UUID}" -eq 12 ]; then
-			UUID="baad1d00-9491-4716-b98b-$UUID"
-		else
-			UUID="baad1d00-9491-4716-b98b-000000000000"
-		fi
+if [ -z "$UUID" ]; then
+	UUID=$( echo "$BOOTIF" | sed -r 's/[^0-9A-Fa-f]//g' )
+	[ "${#UUID}" -eq 14 ] && UUID="${UUID:2}"
+	if [ "${#UUID}" -eq 12 ]; then
+		UUID="baad1d00-9491-4716-b98b-$UUID"
+	else
+		UUID="baad1d00-9491-4716-b98b-000000000000"
 	fi
-	UUID=$( echo "$UUID" | tr 'a-z' 'A-Z' )
-	readonly UUID
-	echo "$UUID" > "/run/system-uuid"
-}
-
-get_system_uuid
+fi
+UUID=$( echo "$UUID" | tr 'a-z' 'A-Z' )
+readonly UUID
+echo "$UUID" > "/run/system-uuid"