#!/bin/bash
# -----------------------------------------------------------------------------
#
# Copyright (c) 2011 - OpenSLX GmbH
#
# This program is free software distributed under the GPL version 2.
# See http://openslx.org/COPYING
#
# If you have any feedback please consult http://openslx.org/feedback and
# send your suggestions, praise, or complaints to feedback@openslx.org
#
# General information about OpenSLX can be found at http://openslx.org/
# -----------------------------------------------------------------------------
#
# This file contains the functions needed to setup a target.
# The main function is 'generate_target' which will go over all
# activated modules (symlinks found under remote/targets/<target>)
# and run the module-specific 'fetch_source', 'build' and 'post_copy'
# functions of the modules.
#
# The functions defined here are module-independent, meaning they
# can process any module, as long as following requirements are met:
#
# - Modules need to have a build-script and a config file,
# i.e. remote/module/kernel/kernel.build
# and remote/module/kernel/kernel.conf
# as these will be read by 'process_module'.
#
# - Modules need to generate a 'build'-directory in their
# own sub-directory (i.e. remote/modules/sshd/build/
# as 'copy_files_with_deps' will look for the files in
# that directory ONLY.
#
# - Several information have to be set in the config file of
# a module:
# * REQUIRED_BINARIES - list of binaries
# * REQUIRED_FILES - list of regular files
# * REQUIRED_DIRECTORIES - list of directories
# * REQUIRED_SYSTEM_FILES - files to be copied directly from the system
# * REQUIRED_INSTALLED_PACKAGES - list of packages needed at build-time
# * REQUIRED_CONTENT_PACKAGES - list of packages where the contents are to be copied
# * (optional variables needed by the module-build-script)
#
# NOTE: REQUIRED_BINARIES, REQUIRED_FILES, REQUIRED_FILES will be ONLY looked
# for in the module's own build directory!
#
# Optionally, a module can have a static data directory under
# remote/modules/<module>/data which will be copied as is to the target build directory.
#
# Moreover modules do not need to specify the dynamic dependencies of given binaries
# as these will be determined automaticly by the helper function 'get_dynamic_dependencies'
# -----------------------------------------------------------------------------
#
MODE_DIR="${ROOT_DIR}/remote"
MODULES_DIR="${MODE_DIR}/modules"
EXPORT_DIR="/export/build"
# Keep track of processed modules so we don't
# build a module multiple times when following dependencies
PROCESSED_MODULES=""
initial_checks () {
detect_distribution
}
#
# generic function to read the config file of the current $MODULE
#
read_config () {
# unset previous variables from other config files
for VARNAME in ${!REQUIRED_*}; do
unset $VARNAME
done
local MODULE_CONFIG="${MODULE_DIR}/${MODULE}.conf"
# sanity checks
[ ! -e "${MODULE_CONFIG}" ] && perror "Config for '$MODULE' not found."
validate_config "$MODULE_CONFIG"
# source the config file
. "${MODULE_CONFIG}" || perror "Sourcing '${MODULE_CONFIG}' failed."
# sanity checks - no distribution specific things in the global config
local CHECK
for CHECK in REQUIRED_CONTENT_PACKAGES REQUIRED_INSTALLED_PACKAGES; do
[ -n "${!CHECK}" ] && perror "$CHECK is set in ${MODULE}.conf, but distribution specific config has to go to one of these files:\n$PRINT_SYS_VERSIONS"
done
local FILE
for FILE in $SYS_VERSIONS; do
if [ -e "${MODULE_CONFIG}.${FILE}" ]; then
# a specific tool.conf seems to exist, use it to override/extend certain vars
validate_config "${MODULE_CONFIG}.${FILE}"
. "${MODULE_CONFIG}.${FILE}" || perror "Sourcing '${MODULE_CONFIG}.${FILE}' failed."
pinfo "Sourced distribution specific config (${MODULE_CONFIG##*/}.${FILE})"
return # end function
fi
done
# reaching here means no specific config
pinfo "Sourced genereal module config only (${MODULE_CONFIG##*/})"
}
validate_config () {
local INVALID=$(grep -h -E -o '^\s*\w+=' "$1" | grep -v -E '^\s*REQUIRED_')
[ -z "$INVALID" ] && return 0
local i
for i in $INVALID; do
pwarning "Invalid variable $i"
done
perror "$1 contains invalid variables. All variables must start with REQUIRED_"
}
#
# generic function to read the build script of the current $MODULE
#
read_build () {
local BUILD_SCRIPT="${MODULE_DIR}/${MODULE}.build"
[ ! -e "${BUILD_SCRIPT}" ] && perror "Build script for specified tool not found."
. "${BUILD_SCRIPT}" || perror "Sourcing '${BUILD_SCRIPT}' failed."
}
export_builds() {
[ ! -d "${MODE_DIR}/builds" ] && perror "No ${MODE_DIR}/builds, nothing to export."
if mount|grep -q tm-scripts/remote/builds; then
pwarning "${MODE_DIR}/builds already exported! Ignoring..."
return 1;
fi
pinfo "Mounting ${MODE_DIR}/builds to ${EXPORT_DIR}. This will make the local builds syncable from another machine."
[ ! -d "${EXPORT_DIR}" ] && mkdir -p "${EXPORT_DIR}"
mount --bind ${MODE_DIR}/builds ${EXPORT_DIR} || perror "Failed to bind mount ${MODE_DIR}/builds to ${EXPORT_DIR}"
}
#
# main function which copies all files, directories, binaries and external libraries to TARGET_BUILD_DIR
# called after building the module
#
copy_files_with_deps () {
[ ! -d "$MODULE_BUILD_DIR" ] && pinfo "No build directory found, skipping dependency copying" && return 0
cd "$MODULE_BUILD_DIR"
local COPYFILES_LIST="${TARGET_BUILD_DIR}/opt/openslx/.mltk/${MODULE}.copy_files_with_deps"
rm -f -- "${COPYFILES_LIST}"
# from REQUIRED_BINARIES - follow symlinks and ldd the file
[ ! -z "${REQUIRED_BINARIES}" ] && pinfo "Gathering required binaries from config file..."
local OPTIONAL
for FILENAME in ${REQUIRED_BINARIES}; do
if [[ "$FILENAME" == @* ]]; then
OPTIONAL="yes"
FILENAME=$(echo "$FILENAME" | cut -c 2- )
else
OPTIONAL="no"
fi
local FILE_CANDIDATES=$( find . -name "${FILENAME}" -a -executable -a \( -type f -o -type l \) )
local FINAL_LIST=""
# Check result of find
if [ "$(echo "$FILE_CANDIDATES" | wc -l)" -gt 1 ]; then
# More than one match for binary
pdebug "Candidates for $FILENAME are: $(echo $FILE_CANDIDATES)"
for FILE in $FILE_CANDIDATES; do
local TESTFILE="$(readlink -f "$FILE")"
pdebug " $FILE leads to $TESTFILE"
[ -f "$TESTFILE" -a -x "$TESTFILE" ] && FINAL_LIST="$FINAL_LIST $FILE"
done
FINAL_LIST=$(trim "$FINAL_LIST")
if [ -z "$FINAL_LIST" ]; then
perror "\tNo binary found for ${FILENAME}. None of the candidates ($FILE_CANDIDATES) is executable."
fi
if [[ "$FINAL_LIST" == *" "* ]]; then
pdebug "Found more than one match for required file '$FILENAME': $FINAL_LIST"
else
pdebug "\tFound ${FILENAME} at ${FILE}"
fi
elif [ "$OPTIONAL" == "no" -a -z "$FILE_CANDIDATES" ]; then
# No candidate
perror "Could not find required binary $FILENAME"
else
# One candidate
local TESTFILE=$(readlink -f "$FILE_CANDIDATES")
if [ -f "$TESTFILE" -a -x "$TESTFILE" ]; then
FINAL_LIST=${FILE_CANDIDATES}
elif [ "$OPTIONAL" = "no" ]; then
perror "No executable regular file found for '$FILENAME' (potential match was $(echo $FILE_CANDIDATES))"
fi
fi
for FILE in $FINAL_LIST; do
pdebug "* $FILE"
get_link_chain "${MODULE_BUILD_DIR}/${FILE}" "${MODULE_BUILD_DIR}" >> "${COPYFILES_LIST}"
get_dynamic_dependencies -l "${MODULE_BUILD_DIR}" "${FILE}" >> "${COPYFILES_LIST}"
done
done
# from REQUIRED_LIBRARIES - like binaries, follow symlinks and ldd, but also expand the lib-name
# by looking for files named <libname>.so*
[ ! -z "$REQUIRED_LIBRARIES" ] && pinfo "Gathering required libraries from config file..."
for LIB in $REQUIRED_LIBRARIES; do
FILE_CANDIDATES=$(find . -name "${LIB}.so*")
[ -z "$FILE_CANDIDATES" ] && perror "Cannot find required library $LIB"
for LOCATION in $FILE_CANDIDATES; do
pdebug "* $LOCATION"
get_link_chain "${MODULE_BUILD_DIR}/${LOCATION}" "${MODULE_BUILD_DIR}" >> "${COPYFILES_LIST}"
get_dynamic_dependencies -l "${MODULE_BUILD_DIR}" "${LOCATION}" >> "${COPYFILES_LIST}"
done
done
# from REQUIRED_DIRECTORIES - recursively copy given dirs, look for files that seem to be an elf
# binary and do the symlink+ldd trick on them
[ ! -z "${REQUIRED_DIRECTORIES}" ] && pinfo "Gathering required directories from config file..."
local ENTRY=""
for ENTRY in ${REQUIRED_DIRECTORIES}; do
[[ "$ENTRY" == /* ]] || perror "All entries in REQUIRED_DIRECTORIES have to start with a slash '/', but $ENTRY does not!"
pdebug "* $ENTRY"
ENTRY=".${ENTRY}"
echo "${ENTRY}" >> "${COPYFILES_LIST}"
for BIN in $(find "${ENTRY}" -type f -a \( -executable -o -name '*.so*' \) -a -not -name '*.a'); do
#pdebug "\tSearching libs for ${BIN}..."
get_link_chain "${MODULE_BUILD_DIR}/${BIN}" "${MODULE_BUILD_DIR}" >> "${COPYFILES_LIST}"
get_dynamic_dependencies -l "${MODULE_BUILD_DIR}" "${BIN}" >> "${COPYFILES_LIST}"
done
done
# from REQUIRED_FILES - these are assumed to be simple files, so only follow symlinks
[ ! -z "${REQUIRED_FILES}" ] && pinfo "Gathering required files from config file..."
for ENTRY in ${REQUIRED_FILES}; do
get_link_chain "${MODULE_BUILD_DIR}/${ENTRY}" "${MODULE_BUILD_DIR}" >> "${COPYFILES_LIST}"
done
#copy to initramfsdir
pdebug "File list generated at ${MODULE_BUILD_DIR}/${COPYFILES_LIST}."
# empty?
if [ ! -s "$COPYFILES_LIST" ]; then
return
fi
# unchanged?
local OLD="${COPYFILES_LIST}.old"
if [ -s "$OLD" ] && diff "$OLD" "$COPYFILES_LIST"; then
return
fi
local CLISTCOUNT=$(cat "$COPYFILES_LIST" | wc -l)
pinfo "Copying $CLISTCOUNT files to '${TARGET_BUILD_DIR}'."
tarcopy "$(sort -u "$COPYFILES_LIST")" "${TARGET_BUILD_DIR}"
mv -f "$COPYFILES_LIST" "$OLD"
}
#
#
# main public function. Requires the TARGET to be given as argument.
# this will simply go over all the modules as found in the remote/target/<TARGET>
# and run following functions:
#
#
generate_target() {
initial_checks
TARGET=$1 && shift
TARGET_DIR="${MODE_DIR}/targets/${TARGET}"
TARGET_BUILD_DIR="${MODE_DIR}/builds/${TARGET}"
[ -e "${ROOT_DIR}/logs/${TARGET}.size" ] && . "${ROOT_DIR}/logs/${TARGET}.size" || echo "declare -A BUILD_SIZE" >> "${ROOT_DIR}/logs/${TARGET}.size"
[ -d "$TARGET_DIR" ] || perror "Given target directory does not exist: $TARGET_DIR"
[[ "$TARGET" == "builds" || "$TARGET" == "modules" ]] && \
perror "Target directory cannot be named 'builds' or 'modules'."
pdebug "Generating '$TARGET_BUILD_DIR' for '$TARGET'"
# if no arguments assume all.
if [ "x$1" = "x" -o "x$1" = "xall" ]; then
MODULES=$(ls ${TARGET_DIR})
set -- $MODULES
else
# tools = arguments given
MODULES=$@
fi
pinfo "Activated modules in '${TARGET}':"
pinfo "\t$(echo ${MODULES})"
# we need a bit of special logic for kernel specifically
# to check if the built version is corresponding to the
# current kernel version. If not we had a kernel update
# and need to ask the user what to do
if [[ "$MODULES" == *kernel* ]]; then
# if so, check what kernels have been built
if [ -e "${MODULES_DIR}/kernel/ksrc/KVERSION" ]; then
local BUILT_KERNEL_VERSION=$(cat "${MODULES_DIR}/kernel/ksrc/KVERSION")
if [[ "${BUILT_KERNEL_VERSION}" != "${KERNEL_CURRENT_VERSION}" ]]; then
pinfo "The built kernel (${BUILT_KERNEL_VERSION}) is older than the running one (${KERNEL_CURRENT_VERSION})!"
# cleaning the module is enough as it forces to rebuild.
[[ "${AUTO_UPDATE_KERNEL}" == 1 ]] && pinfo "Auto-Udpate Kernel..." && clean_kernel_module --force
fi
elif [ -e "${MODULES_DIR}/kernel/ksrc" ]; then
# check if ksrc is there, since that would be problematic
pwarning "${MODULES_DIR}/kernel/ksrc exists, but KVERSION is not found!"
pwarning "Kernel was probably build with an older version of mltk."
pwarning "If errors arise, either write your KVERSION manually or clean the kernel."
fi
fi
# copy basic libs
pinfo "Copying libc and ld-linux used by ${SHELL}"
tarcopy "$(list_basic_libs)" "${TARGET_BUILD_DIR}"
if [ -d "$TARGET_BUILD_DIR" ]; then
TARGET_BUILD_SIZE=$(du -bc "${TARGET_BUILD_DIR}" | awk 'END {print $1}')
else
TARGET_BUILD_SIZE=0
fi
# now iterate over given tools and copy them
while (( "$#" )); do
process_module "$1"
shift
done
post_process_target
pinfo "Target completed. Total size: $(du -bsh "${TARGET_BUILD_DIR}" | awk 'END {print $1}')"
TOOL_STR=""
}
process_module() {
# Parse arguments
[ "$#" -lt "1" ] && perror "process_module: want >= 1 param."
if [ "x$1" = "x--dep-of" ]; then
shift
local DEPOF=" $1"
shift
else
local DEPOF=""
fi
local MODULE="$1"
[ -z "$MODULE" ] && perror "No module given when calling process_module"
[[ "$PROCESSED_MODULES" == *"!${MODULE}!"* ]] && return # Already processed this module
# Set up dirs ans variables
PROCESSED_MODULES="${PROCESSED_MODULES}!${MODULE}!"
local MODULE_DIR="${TARGET_DIR}/${MODULE}"
local MODULE_BUILD_DIR="${MODULE_DIR}/build"
local TOOL_STR="[${MODULE}]"
local SOURCE_FLAG="$MODULE_BUILD_DIR/fetched_source.flag"
local BUILD_FLAG="$MODULE_BUILD_DIR/build_complete.flag"
local MD5FILE="${TARGET_BUILD_DIR}/opt/openslx/.mltk/${MODULE}.md5"
mkdir -p "${TARGET_BUILD_DIR}/opt/openslx/.mltk"
if [ ! -d "${MODULE_DIR}" ]; then
if [ -z "$DEPOF" ]; then
perror "Module directory for '$MODULE' not found in ${TAREGET_DIR}"
fi
perror "Module directory for '$MODULE' not found in ${TARGET_DIR} (is a dependency of${DEPOF})"
return
fi
cd "${MODULE_DIR}" || perror "Module dir '${MODULE_DIR}' seems to exist, but cd to it failed."
# Simple check for modified .build / .config, in which case we'll run a module clean first
if [ -f "$MD5FILE" ]; then
if ! md5sum --check "$MD5FILE"; then
# Mismatch
if [ "x$MODULE" = "xkernel" ]; then
pwarning " ** Kernel .build/.config changed, but won't autoclean."
pwarning " ** Check if cleaning should be done and use '-c kernel'"
else
pwarning "Module's .build/.config has changed, rebuilding!"
clean_module "$MODULE_DIR"
fi
elif [ ! -e "$SOURCE_FLAG" ] || [ ! -e "$BUILD_FLAG" ]; then
# One of the flags is missing, in this case delete the .md5 file
# which would prevent dependency copying etc. below
rm -f -- "$MD5FILE"
fi
fi
# Process module
mkdir -p "${MODULE_BUILD_DIR}" || perror "Could not create build dir"
pdebug "## Reading config of $MODULE"
read_config
# Check if this module has a dependency that wasn't built yet:
if [ ! -z "$REQUIRED_MODULES" ]; then
pdebug "$MODULE depends on ${REQUIRED_MODULES}...."
for DEP in $REQUIRED_MODULES; do
process_module --dep-of "${MODULE}${DEPOF}" "$DEP"
done
# Read old config again, as it got overwritten by the deps
cd "${MODULE_DIR}" || perror "Tool dir '${MODULE_DIR}' seems to exist, but cd to it failed (after building deps)."
read_config
fi
[ -n "$DEPOF" ] && local DEPOF_STR="(dependency of${DEPOF})"
pinfo ">>>>>>>>>>>>>>>>> Processing module [ $MODULE ] $DEPOF_STR"
# Source .build script of module
pdebug "## Reading .build of $MODULE"
read_build
# Install module's dependencies
pdebug "## Installing dependencies"
cd "${MODULE_DIR}" || perror "cd to '${MODULE_DIR}' failed."
install_dependencies
# Fetch source code
if [ ! -e "$SOURCE_FLAG" ]; then
pinfo "## Fetching source"
fetch_source
touch "$SOURCE_FLAG" || pwarning "Error setting source-flag"
fi
# Build
if [ ! -e "$BUILD_FLAG" ]; then
pinfo "## Building"
cd "${MODULE_DIR}" || perror "cd to '${MODULE_DIR}' failed."
build # calls perror if something fails, no need to do that here
strip_recursive "$MODULE_BUILD_DIR"
touch "$BUILD_FLAG" || pwarning "Error setting built-flag"
fi
# Remove *.la files as they might confuse libtool/linker of other tool packages
[ -d "${MODULE_BUILD_DIR}" ] && find "${MODULE_BUILD_DIR}" -name '*.la' -exec rm -f {} \;
# Only copy stuff from system or build dir if md5s didn't change
if [ ! -f "$MD5FILE" ]; then
pinfo "## Copying files with dependencies"
cd "${MODULE_DIR}" || perror "cd to '${MODULE_DIR}' failed."
copy_files_with_deps
if [ -n "$REQUIRED_SYSTEM_FILES" ]; then
pinfo "## Copying required system files" # REQUIRED_SYSTEM_FILES
cd "${MODULE_DIR}" || perror "cd to '${MODULE_DIR}' failed."
copy_system_files
fi
fi
# Always copy static data
if [ -d "${MODULE_DIR}/data" ]; then
pinfo "## Copying static module files"
copy_static_data
fi
pinfo "## Post copy"
cd "${MODULE_DIR}" || perror "cd to '${MODULE_DIR}' failed."
post_copy
# Write new md5 file if not existent yet
if [ ! -f "$MD5FILE" ]; then
md5sum "$MODULE_DIR/$MODULE".* > "$MD5FILE" || perror "Could not create $MD5FILE"
fi
# Update size of target build dir
if [ -d "${TARGET_BUILD_DIR}" ]; then
TARGET_BUILD_SIZE=$(du -bc "${TARGET_BUILD_DIR}" | awk 'END {print $1}')
else
TARGET_BUILD_SIZE=0
fi
# Sanity checks
[ -e "$TARGET_BUILD_DIR/var/run" -a ! -L "$TARGET_BUILD_DIR/var/run" ] && perror "Messup datected: $TARGET_BUILD_DIR/var/run exists and is not a symlink!"
[ -e "$TARGET_BUILD_DIR/var/lock" -a ! -L "$TARGET_BUILD_DIR/var/lock" ] && perror "Messup datected: $TARGET_BUILD_DIR/var/lock exists and is not a symlink!"
[ -n "$(ls -A "$TARGET_BUILD_DIR/run")" ] && perror "Messup detected: $TARGET_BUILD_DIR/run is not empty. You cannot place static files there, use /etc/tmpfiles.d instead!"
# set MODULE_BUILD_SIZE
calc_size
pinfo "Module completed. Total size: ${MODULE_BUILD_SIZE}"
}
post_process_target() {
local TOOL_STR="$TOOL_STR post_process_target:"
if [ -d "${TARGET_BUILD_DIR}/lib/systemd" ]; then
pwarning "/lib/systemd exists in the generated target. It is not advisable to fetch existing"
pwarning "systemd service files from the template system, as it might conflict with generated"
pwarning "ones. In fact, some systems don't even use systemd so there might be no existing"
pwarning "service files. Please generate your own service file and place it in /etc/systemd."
pwarning "All files in /lib/systemd will be ignored."
fi
# figure out all relevant ld-paths
pinfo "Running ldconfig"
local LDTEMP="$TARGET_BUILD_DIR/ldconf-temp"
grep -h '^\s*/' /etc/ld.so.conf /etc/ld.so.conf.d/* > "$LDTEMP"
# TODO: Echo other stuff to $LDTEMP (but figure out if first or last match wins)
ldconfig -v -r "${TARGET_BUILD_DIR}" -f "/ldconf-temp"
unlink "$LDTEMP"
}
clean_modules() {
TARGET=$1
shift
TARGET_DIR="${MODE_DIR}/targets/${TARGET}"
TARGET_BUILD_DIR="${MODE_DIR}/builds/${TARGET}"
[ -d $TARGET_DIR ] || perror "Given target directory does not exist: $TARGET_DIR"
if [ "x$1" = "x" -o "x$1" = "xall" ]; then
if [ -e ${ROOT_DIR}/logs/${TARGET}.size ]; then
rm "${ROOT_DIR}/logs/${TARGET}.size" || perror "Could not delete logs/${TARGET}.size"
fi
if [ -d ${TARGET_BUILD_DIR} ]; then
pinfo "Cleaning '${TARGET_BUILD_DIR}'" \
&& rm -rf "${TARGET_BUILD_DIR}"/* \
|| perror "Error deleting $TARGET_BUILD_DIR"
fi
set -- $(ls ${TARGET_DIR} | grep -v kernel)
fi
cd "$TARGET_DIR"
while (( "$#" )); do
clean_module $(readlink -f "$1")
shift
done
cd - &> /dev/null
# libck-connector cleanup
rm -f "$TARGET_DIR/post-patch/ck-connector/libck-connector.so"
}
clean_module() {
[ -z "$1" ] && perror "No module given on clean_module()"
[ ! -d "$1" ] && perror "Module dir $1 doesn't exist!"
local MODULE=$(basename "$1")
# if kernel is to be cleaned, do it separately and return
[ "x$MODULE" == "xkernel" ] && clean_kernel_module && return
pinfo "Cleaning '$1'..."
local MODULE_DIR="$1"
rm -rf -- "${MODULE_DIR}/build" || perror "Could not delete build path"
rm -rf -- "${MODULE_DIR}/src" || perror "Could not delete src path"
rm -f -- "${MODULE_DIR}/list_dpkg_output" || perror "Could not delete list_dpkg_output"
rm -f -- "${MODULE_DIR}/list_binaries_and_files" || perror "Could not delete list_binaries_and_files"
rm -f -- "${TARGET_BUILD_DIR}/opt/openslx/.mltk/${MODULE}."* # no space here!
# These are not in use anymore, but leave the cleanup here for upgraders
rm -f -- "${MODULE_DIR}/.built"
rm -f -- "${MODULE_DIR}/.fetched_source"
}
clean_kernel_module() {
local CLEAN=0
if [ "x$1" == "x--force" ]; then
CLEAN=1
else
pinfo "It will take a long time to rebuild, are you sure? [y/N]"
read USER_INPUT
[ "x$USER_INPUT" == "xy" ] && CLEAN=1
fi
pinfo "Cleaning kernel module (including sources and compiled stuff)."
if [[ $CLEAN == 1 ]]; then
cd "${TARGET_DIR}/kernel" || perror "Could not cd to ${TARGET_DIR}/kernel"
if [ -e build ]; then
rm -rf build || perror "Could not delete ${TARGET_DIR}/kernel/build"
fi
# little workaround to actually list names of entries
# (if only a dir exists, ls kernel/linux-* would just list
# the contents of that directory....)
for FILE in $(ls | grep linux); do
rm -rf $FILE || perror "Could not delete $TARGET_DIR}/$FILE"
done
# finally clean the config generated
if [ -e openslx.config ]; then
rm openslx.config || perror "Could not delete ${TARGET_DIR}/kernel/openslx.config"
fi
if [ -e .fetched_source ]; then
rm .fetched_source || perror "Could not delete ${TARGET_DIR}/kernel/.fetched_source"
fi
if [ -e .built ]; then
rm .built || perror "Could not delete ${TARGET_DIR}/kernel/.built"
fi
if [ -L ksrc ]; then
unlink ksrc || perror "Could not unlink ${TARGET_DIR}/kernel/ksrc."
fi
else
pinfo "Not confirmed, not cleaning kernel module."
fi
pinfo "Done cleaning kernel."
}
# Recursively strip binaries and libraries in the given directory
strip_recursive() {
local DIR="$1"
[ -n "$DIR" -a -d "$DIR" ] || perror "strip_recursive(): No such directory: '$DIR'"
# Will try to strip shell scripts too but shouldn't do any harm
find "$DIR" -type f -a \( -executable -o -name "*.so*" \) -exec strip {} \; 2> /dev/null
}
# copies static data files from <MODULE>/data/ to <TARGET_BUILD_DIR>
copy_static_data() {
[ ! -d "${MODULE_DIR}/data" ] && pinfo "${MODULE} has no static 'data' directory." && return
cp -r "${MODULE_DIR}/data/"* ${TARGET_BUILD_DIR} || perror "Could not copy static data of ${MODULE}"
}
# Copies files with their absolute paths in $REQUIRED_SYSTEM_FILES to $TARGET_BUILD_DIR
copy_system_files() {
[ ! -z "$REQUIRED_SYSTEM_FILES" ] && tarcopy "$REQUIRED_SYSTEM_FILES" "$TARGET_BUILD_DIR"
}
# Tries to calculate the size of modules - doesn't seem to work all the time
calc_size() {
local CURRENT_BUILD_SIZE=$(du -bc "${TARGET_BUILD_DIR}" | awk 'END {print $1}')
[ ! -z "${BUILD_SIZE[$MODULE]}" ] && local OLD_MODULE_SIZE=${BUILD_SIZE[$MODULE]} || local OLD_MODULE_SIZE=0
local diff=$((CURRENT_BUILD_SIZE-TARGET_BUILD_SIZE+OLD_MODULE_SIZE))
if [ -z "${BUILD_SIZE[$MODULE]}" ]; then
echo "BUILD_SIZE[$MODULE]=${diff}" >> "${ROOT_DIR}/logs/${TARGET}.size"
else
sed -i "s/^BUILD_SIZE\[${MODULE}\]=.*$/BUILD_SIZE\[${MODULE}\]=${diff}/g" "${ROOT_DIR}/logs/${TARGET}.size"
fi
MODULE_BUILD_SIZE=$(echo $diff | awk '{ sum=$1; hum[1024^3]="GB"; hum[1024^2]="MB"; hum[1024]="KB";
for (x=1024^3; x>=1024; x/=1024){
if (sum>=x) { printf "%.2f %s\n",sum/x,hum[x]; break }
}
}')
}