Merge branch 'master' of git.openslx.org:openslx-ng/tm-scripts

4 files changed, 96 insertions, 194 deletions

diff --git a/remote/modules/rsyslogd/data/etc/rsyslog.conf b/remote/modules/rsyslogd/data/etc/rsyslog.conf
index e2548c99..3099f250 100644
--- a/remote/modules/rsyslogd/data/etc/rsyslog.conf
+++ b/remote/modules/rsyslogd/data/etc/rsyslog.conf
@@ -1,169 +1,85 @@
-##
-## === When you're using remote logging, enable on-disk queues ===  
-## === in rsyslog.d/remote.conf. When neccesary also set the   ===
-## === SYSLOG_REQUIRES_NETWORK=yes in /etc/sysconfig/syslog,   ===
-## === e.g. when rsyslog has to receive on a specific IP only. ===
-##
-## Note, that when the MYSQL, PGSQL, GSSAPI, GnuTLS or SNMP modules
-## (provided in separate rsyslog-module-* packages) are enabled, the
-## configuration can't be used on a system with /usr on a remote
-## filesystem, except on newer systems where initrd mounts /usr.
-## [The modules are linked against libraries installed bellow of
-##  /usr thus also installed in /usr/lib*/rsyslog because of this.]
-##
-
+#  /etc/rsyslog.conf    Configuration file for rsyslogd.
 #
-# if you experience problems, check
-# http://www.rsyslog.com/troubleshoot for assistance
-# and report them at http://bugzilla.novell.com/
+#                       For more information see
+#                       /usr/share/doc/rsyslog/html/rsyslog_conf.html
+#
+# First some standard logfiles.  Log by facility.
 #
 
-# since rsyslog v3: load input modules
-# If you do not load inputs, nothing happens!
-
-# provides --MARK-- message capability (every 1 hour)
-$ModLoad immark.so
+$ModLoad imuxsock # provides support for local system logging
+$ModLoad imklog   # provides kernel logging support (previously done by rklogd)
+$ModLoad immark
 $MarkMessagePeriod      3600
-
-# provides support for local system logging (e.g. via logger command)
-$ModLoad imuxsock.so
-
-# reduce dupplicate log messages (last message repeated n times)
 $RepeatedMsgReduction   on
 
-# kernel logging (may be also provided by /sbin/klogd)
-# see also http://www.rsyslog.com/doc-imklog.html.
-$ModLoad imklog.so
-# set log level 1 (same as in /etc/sysconfig/syslog).
-$klogConsoleLogLevel    1
-
-# Use rsyslog native, rfc5424 conform log format as default
-# ($ActionFileDefaultTemplate RSYSLOG_FileFormat).
-#
-# To change a single file to use obsolete BSD syslog format
-# (rfc 3164, no high-precision timestamps), set the variable
-# bellow or append ";RSYSLOG_FileFormat" to the filename.
-# See
-#   http://www.rsyslog.com/doc/rsyslog_conf_templates.html
-# for more informations.
-#
-#$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
-
-#
-# Include config generated by /etc/init.d/syslog script
-# using the SYSLOGD_ADDITIONAL_SOCKET* variables in the
-# /etc/sysconfig/syslog file.
-#
-#$IncludeConfig /var/run/rsyslog/additional-log-sockets.conf
-
-#
-# Include config files, that the admin provided? :
-#
-$IncludeConfig /etc/rsyslog.d/*.conf
-
 
-###
-# print most important on tty10 and on the xconsole pipe
-#
-if	( \
-	    /* kernel up to warning except of firewall  */ \
-	    ($syslogfacility-text == 'kern')      and      \
-	    ($syslogseverity <= 4 /* warning */ ) and not  \
-	    ($msg contains 'IN=' and $msg contains 'OUT=') \
-	) or ( \
-	    /* up to errors except of facility authpriv */ \
-	    ($syslogseverity <= 3 /* errors  */ ) and not  \
-	    ($syslogfacility-text == 'authpriv')           \
-	) \
-then	/dev/tty10
-&	|/dev/console
+if      ( \
+            /* kernel up to warning except of firewall  */ \
+            ($syslogfacility-text == 'kern')      and      \
+            ($syslogseverity <= 4 /* warning */ ) and not  \
+            ($msg contains 'IN=' and $msg contains 'OUT=') \
+        ) or ( \
+            /* up to errors except of facility authpriv */ \
+            ($syslogseverity <= 3 /* errors  */ ) and not  \
+            ($syslogfacility-text == 'authpriv')           \
+        ) \
+then    /dev/tty10
+&       |/dev/console
 
 
-# Emergency messages to everyone logged on (wall)
-*.emerg					 :omusrmsg:*
-
-# enable this, if you want that root is informed
-# immediately, e.g. of logins
-#*.alert				root
-
 
+auth,authpriv.*                 /var/log/auth.log
+*.*;auth,authpriv.none          -/var/log/syslog
+#cron.*                         /var/log/cron.log
+daemon.*                        -/var/log/daemon.log
+kern.*                          -/var/log/kern.log
+lpr.*                           -/var/log/lpr.log
+mail.*                          -/var/log/mail.log
+user.*                          -/var/log/user.log
 #
-# firewall messages into separate file and stop their further processing
+# Logging for the mail system.  Split it up so that
+# it is easy to write scripts to parse these files.
 #
-if	($syslogfacility-text == 'kern') and \
-	($msg contains 'IN=' and $msg contains 'OUT=') \
-then	-/var/log/firewall
-&	~
-
-
+mail.info                       -/var/log/mail.info
+mail.warn                       -/var/log/mail.warn
+mail.err                        /var/log/mail.err
 #
-# acpid messages into separate file and stop their further processing
+# Logging for INN news system
 #
-# => all acpid messages for debuging (uncomment if needed):
-#if	($programname == 'acpid' or $syslogtag == '[acpid]:') then \
-#	-/var/log/acpid
+news.crit                       /var/log/news/news.crit
+news.err                        /var/log/news/news.err
+news.notice                     -/var/log/news/news.notice
 #
-# => up to notice (skip info and debug)
-if	($programname == 'acpid' or $syslogtag == '[acpid]:') and \
-	($syslogseverity <= 5 /* notice */) \
-then	-/var/log/acpid
-&	~
-
-
+# Some `catch-all' logfiles.
 #
-# NetworkManager into separate file and stop their further processing
+*.=debug;\
+        auth,authpriv.none;\
+        news.none;mail.none     -/var/log/debug
+*.=info;*.=notice;*.=warn;\
+        auth,authpriv.none;\
+        cron,daemon.none;\
+        mail,news.none          -/var/log/messages
 #
-if      ($programname == 'NetworkManager') or \
-	($programname startswith 'nm-') \
-then	-/var/log/NetworkManager
-&	~
-
-
+# Emergencies are sent to everybody logged in.
 #
-# email-messages
-#
-mail.*					-/var/log/mail
-mail.info				-/var/log/mail.info
-mail.warning				-/var/log/mail.warn
-mail.err				 /var/log/mail.err
-
-
+*.emerg                         *
 #
-# news-messages
+# I like to have messages displayed on the console, but only on a virtual
+# console I usually leave idle.
 #
-news.crit				-/var/log/news/news.crit
-news.err				-/var/log/news/news.err
-news.notice				-/var/log/news/news.notice
-# enable this, if you want to keep all news messages
-# in one file
-#news.*					-/var/log/news.all
-
-
+#daemon,mail.*;\
+#       news.=crit;news.=err;news.=notice;\
+#       *.=debug;*.=info;\
+#       *.=notice;*.=warn       /dev/tty8
+# The named pipe /dev/xconsole is for the `xconsole' utility.  To use it,
+# you must invoke `xconsole' with the `-file' option:
 #
-# Warnings in one file
+#    $ xconsole -file /dev/xconsole [...]
 #
-*.=warning;*.=err			-/var/log/warn
-*.crit					 /var/log/warn
-
-
+# NOTE: adjust the list below, or you'll go crazy if you have a reasonably
+#      busy site..
 #
-# the rest in one file
-#
-*.*;mail.none;news.none			-/var/log/messages
-
-
-#
-# enable this, if you want to keep all messages
-# in one file
-#*.*					-/var/log/allmessages
-
-
-#
-# Some foreign boot scripts require local7
-#
-local0.*;local1.*			-/var/log/localmessages
-local2.*;local3.*			-/var/log/localmessages
-local4.*;local5.*			-/var/log/localmessages
-local6.*;local7.*			-/var/log/localmessages
-
-###
+daemon.*;mail.*;\
+        news.err;\
+        *.=debug;*.=info;\
+        *.=notice;*.=warn       |/dev/console
diff --git a/remote/modules/rsyslogd/rsyslogd.conf b/remote/modules/rsyslogd/rsyslogd.conf
index 35631c41..602a6050 100644
--- a/remote/modules/rsyslogd/rsyslogd.conf
+++ b/remote/modules/rsyslogd/rsyslogd.conf
@@ -1,4 +1,4 @@
 REQUIRED_PACKAGES="	rsyslog"
 REQUIRED_BINARIES="	rsyslogd"
+REQUIRED_FILES="	/etc/rsyslog.conf"
 REQUIRED_DIRECTORIES="	/usr/lib/rsyslog"
-REQUIRED_SYSTEM_FILES="	/etc/rsyslog.conf"
diff --git a/remote/rootfs/rootfs-stage31/data/init b/remote/rootfs/rootfs-stage31/data/init
index a9c0435c..1e41012e 100755
--- a/remote/rootfs/rootfs-stage31/data/init
+++ b/remote/rootfs/rootfs-stage31/data/init
@@ -25,6 +25,14 @@ mount -n -t tmpfs -o 'mode=755' run "/run"
 echo "/sbin/mdev" > /proc/sys/kernel/hotplug
 # read graphic and network adaptor configuration (without proprietary drivers yet)
 
+# TODO: must ugly hack ever... needs to be improved when we add prop drivers
+for DRM in /lib/modules/*/kernel/drivers/gpu/drm/*.ko /lib/modules/*/kernel/drivers/gpu/drm/*/*.ko; do
+	DRM="$(basename "$DRM")"
+	DRM="${DRM%.ko}"
+	echo "Trying to load module $DRM"
+	modprobe "$DRM"
+done
+
 # read kernel command line for debugging switch
 DEBUG=0
 read KCL < /proc/cmdline
@@ -57,10 +65,6 @@ if [ "x$SPLASH" == "x1" -a "x$DEBUG" != "x1" ]; then
 	plymouthd && plymouth show-splash
 fi
 
-# still needed?
-#echo "modprobe -qa usbhid hid-bright" >/etc/modprobe.base
-#/bin/sh /etc/modprobe.base; mdev -s
-
 # setup network
 nwif="eth0"
 # set up loopback networking
@@ -73,37 +77,32 @@ ip link set dev $nwif up  2>/dev/null || { echo "No link for $nwif, dropping to
 # analyze ip information from the kernel command line and put parts
 # of it into several variables
 if [ -n "$ipinfo" ] ; then
-  getip () {
-    local val="$ipinfo:"; i=$(($1 - 1));
-    while [ $i -gt 0 ] ; do
-      val=${val#*:} ; i=$(($i - 1));
-    done;
-  echo $val|sed "s/:.*//"; }
-  clientip=$(getip 1)
-  serverip=$(getip 2)
-  gateway=$(getip 3)
-  subnet_mask=$(getip 4)
-  broadcast_address=$(ipcalc -s -b $clientip $subnet_mask|sed s/.*=//)
-  [ -z "$broadcast_address" ] && broadcast_address=255.255.255.255
-  # we might have an idea of the dns server via preboot
-  dns_srv=$(getip 5)
-  [ -n "$dns_srv" ] && echo nameserver $dns_srv >/etc/resolv.conf;
-  echo -e "# ip configuration written by $0 script:\nclientip=$clientip\n\
+	getip () {
+	local val="$ipinfo:"; i=$(($1 - 1));
+	while [ $i -gt 0 ] ; do
+		val=${val#*:} ; i=$(($i - 1));
+	done;
+	echo $val|sed "s/:.*//"; }
+	clientip=$(getip 1)
+	serverip=$(getip 2)
+	gateway=$(getip 3)
+	subnet_mask=$(getip 4)
+	broadcast_address=$(ipcalc -s -b $clientip $subnet_mask|sed s/.*=//)
+	[ -z "$broadcast_address" ] && broadcast_address=255.255.255.255
+	# we might have an idea of the dns server via preboot
+	dns_srv=$(getip 5)
+	[ -n "$dns_srv" ] && echo nameserver $dns_srv >/etc/resolv.conf;
+	echo -e "# ip configuration written by $0 script:\nclientip=$clientip\n\
 subnet_mask=$subnet_mask\ngateway=$gateway\nserverip=$serverip\n\
 broadcast_address=$broadcast_address" >>/etc/initramfs-setup
-  # set static ip address
-  ip addr add $clientip/$(ipcalc -s -p $clientip $subnet_mask|sed s/.*=//) \
-    broadcast $broadcast_address dev $nwif 2>/dev/null
-  ip route add default via $gateway 2>/dev/null
+	# set static ip address
+	ip addr add $clientip/$(ipcalc -s -p $clientip $subnet_mask|sed s/.*=//) \
+	broadcast $broadcast_address dev $nwif 2>/dev/null
+	ip route add default via $gateway 2>/dev/null
 else
-  noipyet="yes"
+	noipyet="yes"
 fi
 
-
-# load local file systems - in kernel now! :-)
-#modprobe aufs
-#modprobe squashfs
-
 mkdir -p /dev/shm/union /dev/shm/uniontmp /rorootfs
 mount -n -t tmpfs none /dev/shm/uniontmp
 
@@ -124,12 +123,13 @@ else
 fi
 
 echo "Building aufs..."
+#mount -t overlayfs -o lowerdir=/rorootfs,upperdir=/dev/shm/uniontmp overlayfs /mnt
 mount -n -t aufs -o br:/dev/shm/uniontmp:/rorootfs=ro none /mnt
 mkdir -p /mnt/uniontmp /mnt/tmp
 mount -n --move /dev/shm/uniontmp /mnt/uniontmp
 
 # create udev rule for nic we booted from
-echo 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="'$macaddr'", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"' > "/mnt/etc/udev/rules.d/70-net-boot-nic-name.rules"
+[ -e "/mnt/etc/udev/rules.d/70-net-boot-nic-name.rules" ] && echo 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="'$macaddr'", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"' > "/mnt/etc/udev/rules.d/70-net-boot-nic-name.rules"
 
 for mnt in proc sys run ; do
   umount -n $mnt
diff --git a/remote/rootfs/rootfs-stage31/rootfs-stage31.conf b/remote/rootfs/rootfs-stage31/rootfs-stage31.conf
index 788ff8b3..b39895e2 100644
--- a/remote/rootfs/rootfs-stage31/rootfs-stage31.conf
+++ b/remote/rootfs/rootfs-stage31/rootfs-stage31.conf
@@ -4,22 +4,8 @@ REQUIRED_KERNEL_MODULES="	kernel/drivers/video/sis/sisfb.ko
 				kernel/drivers/video/via/viafb.ko
         	               	kernel/drivers/acpi/video.ko
                 	       	kernel/drivers/ssb/ssb.ko
-	                       	kernel/drivers/gpu/drm/ttm/ttm.ko
-        	               	kernel/drivers/gpu/drm/via/via.ko
-                	       	kernel/drivers/gpu/drm/drm.ko
-                       	       	kernel/drivers/gpu/drm/tdfx/tdfx.ko
-	                       	kernel/drivers/gpu/drm/nouveau/nouveau.ko
-	                       	kernel/drivers/gpu/drm/savage/savage.ko
-				kernel/drivers/gpu/drm/radeon/radeon.ko
-				kernel/drivers/gpu/drm/drm_kms_helper.ko
-				kernel/drivers/gpu/drm/i810/i810.ko
-				kernel/drivers/gpu/drm/i2c/ch7006.ko
-				kernel/drivers/gpu/drm/i2c/sil164.ko
-				kernel/drivers/gpu/drm/sis/sis.ko
-				kernel/drivers/gpu/drm/mga/mga.ko
-				kernel/drivers/gpu/drm/i915/i915.ko
-				kernel/drivers/gpu/drm/r128/r128.ko
-				kernel/drivers/gpu/drm/vmwgfx/vmwgfx.ko
+	                       	kernel/drivers/gpu/drm/drm*.ko
+	                       	kernel/drivers/gpu/drm/*/*.ko
 				kernel/drivers/i2c/algos/i2c-algo-bit.ko
 				kernel/drivers/i2c/i2c-core.ko
 				kernel/drivers/usb/usb-common.ko