Merge branch 'master' of git.openslx.org:openslx-ng/tm-scripts

6 files changed, 38 insertions, 29 deletions

diff --git a/remote/modules/consolekit/consolekit.conf.ubuntu b/remote/modules/consolekit/consolekit.conf.ubuntu
index 3b160bc9..e7f5e47d 100644
--- a/remote/modules/consolekit/consolekit.conf.ubuntu
+++ b/remote/modules/consolekit/consolekit.conf.ubuntu
@@ -1,3 +1,6 @@
+REQUIRED_INSTALLED_PACKAGES="
+	consolekit
+"
 REQUIRED_CONTENT_PACKAGES="
 	consolekit
 	libpam-ck-connector
diff --git a/remote/modules/vmchooser/data/opt/openslx/scripts/vmchooser-run_virt b/remote/modules/vmchooser/data/opt/openslx/scripts/vmchooser-run_virt
index 2c48218c..eb284192 100755
--- a/remote/modules/vmchooser/data/opt/openslx/scripts/vmchooser-run_virt
+++ b/remote/modules/vmchooser/data/opt/openslx/scripts/vmchooser-run_virt
@@ -244,11 +244,6 @@ else
 	vmpath="${imgpath}/${imgname}"
 fi
 
-# Check if virtual machine container file exists
-if ! [ -e "${vmpath}" ]; then
-	writelog "Virtual machine image ${vmpath} not found!"
-	exit 1
-fi
 
 # Name of the virt machine, sed because of Windows formatting
 vm_name=$(grep -o 'short_description param=.*"' "${xmlfile}" \
@@ -470,17 +465,18 @@ cp "/opt/openslx/etc/vmchooser/openslx.exe" "/opt/openslx/etc/vmchooser/fd-loop/
 unset vm_diskfile
 unset vm_revision
 unset dnbd3
-if [ -n "$SLX_DNBD3_SERVERS" -a "x$SLX_VM_DNBD3" = "xyes" ]; then
+if [ -n "$SLX_DNBD3_SERVERS" -o -n "$SLX_DNBD3_PRIO_SERVERS" ] && [ "x$SLX_VM_DNBD3" = "xyes" ]; then
 	if [ -e "/dev/dnbd0" -a -e "/var/run/dnbd3.socket" ]; then
 		# Shuffle server list
-		TMP_SERVERS=$(for SRV in $SLX_DNBD3_SERVERS; do echo "$RANDOM $SRV"; done | sort -u | sed -r 's/^[0-9]+ //')
-		for SRV in $TMP_SERVERS; do
+		[ -n "$SLX_DNBD3_SERVERS" ] && TMP_SERVERS=$(for SRV in $SLX_DNBD3_SERVERS; do echo "$RANDOM $SRV"; done | sort -u | sed -r 's/^[0-9]+ //')
+		for SRV in $SLX_DNBD3_PRIO_SERVERS $TMP_SERVERS; do
 			dnbd3=$(dnbd3-client -h "$SRV" -i "${vmpath#/mnt/vmstore/}" -r 0)
 			RET=$?
 			if [ "$RET" = "0" ]; then
-				vm_diskfile="$dnbd3"
 				vm_revision=$(cat "/sys/block/${dnbd3#/dev/}/net/rid")
 				writelog "DNBD3: $vm_diskfile on $dnbd3 with rid $vm_revision"
+				vm_diskfile="$dnbd3"
+				vmpath="$vm_diskfile"
 				break
 			fi
 		done
@@ -491,7 +487,18 @@ if [ -n "$SLX_DNBD3_SERVERS" -a "x$SLX_VM_DNBD3" = "xyes" ]; then
 else
 	writelog "Won't use dnbd3 as no servers are given in config"
 fi
-[ -z "$vm_diskfile" ] && vm_diskfile="$vmpath"
+
+if [ -z "$vm_diskfile" ]; then
+	vmpath=$(ls "${vmpath}.r"* | grep -E '\.r[0-9]+$' | sort --version-sort | tail -1)
+	vm_diskfile="$vmpath"
+fi
+
+# Check if virtual machine container file exists
+if ! [ -e "${vmpath}" ]; then
+	writelog "Virtual machine image ${vmpath} not found!"
+	exit 1
+fi
+
 writelog "Used diskfile: $vm_diskfile"
 
 # Get all virtual machine specific stuff from the respective include file
@@ -503,7 +510,7 @@ fi
 self="${xmlvirt}"
 . "/opt/openslx/etc/${xmlvirt}/run-virt.include" || writelog "Erroneous run-virt.include for $xmlvirt"
 # start a windowmanager for easier handling
-# (expect problems /w windows opening in background /w vmware without wm)
+# (expect problems w/ windows opening in background w/ vmware without wm)
 for dm in twm xfwm4 metacity openbox blackbox kwin fvwm2 ; do
 	if which $dm >/dev/null 2>&1 ; then
 		if [ "$dm" = "fvwm2" ] ; then
diff --git a/remote/modules/vmchooser/data/opt/openslx/scripts/vmchooser-xml_filter b/remote/modules/vmchooser/data/opt/openslx/scripts/vmchooser-xml_filter
index 4faea740..960d1358 100755
--- a/remote/modules/vmchooser/data/opt/openslx/scripts/vmchooser-xml_filter
+++ b/remote/modules/vmchooser/data/opt/openslx/scripts/vmchooser-xml_filter
@@ -59,9 +59,9 @@ function handlePersistentVM() {
 		grep -i -q "<active param=.*true.*" "$FILE" || continue
 		# HACK: filter all virtualbox images, as vbox is not ready yet
 		grep -i -q "<virtualmachine param=.*virtualbox.*" "$FILE" && continue
-		if [ -n "${vmchooser_env}" ]; then
+		if [ -n "${SLX_VM_POOL_FILTER}" ]; then
 			# filter all xmls with pool-param not equal to vmchooser::env
-			if [ $(grep "<pools param=\"${vmchooser_env}\"" "$FILE" | wc -l) -eq 1 ]; then
+			if [ $(grep "<pools param=\"${SLX_VM_POOL_FILTER}\"" "$FILE" | wc -l) -eq 1 ]; then
 				handlePersistentVM "$FILE"
 				echo "$FILE"
 			fi
diff --git a/remote/modules/vmware/data/opt/openslx/scripts/systemd-vmware_env b/remote/modules/vmware/data/opt/openslx/scripts/systemd-vmware_env
index 175f3bef..bf7bfc5e 100755
--- a/remote/modules/vmware/data/opt/openslx/scripts/systemd-vmware_env
+++ b/remote/modules/vmware/data/opt/openslx/scripts/systemd-vmware_env
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/opt/openslx/bin/ash
 # Copyright (c) 2009 - OpenSLX GmbH 
 # 
 # This program is free software distributed under the GPL version 2. 
@@ -10,8 +10,6 @@
 # General information about OpenSLX can be found at http://openslx.org/ 
 # -----------------------------------------------------------------------------
 
-export PATH=$PATH:/opt/openslx/bin:/opt/openslx/sbin:/opt/openslx/usr/bin:/opt/openslx/usr/sbin
-
 VMWARE_CONF_DIR=/opt/openslx/etc/vmware
 
 for wait in 1 1 2 2 3 end; do
@@ -117,23 +115,23 @@ setup_network() {
 		  -e "s,LEASEFILE,/var/run/vmware/udhcpd-vmnet8.leases," \
 	      ${VMWARE_CONF_DIR}/udhcpd.conf >/etc/vmware/udhcpd/udhcpd-vmnet8.conf
 	      # might be not needed any more ...
-	      echo -e "# Linux NAT configuration file" \
+	      echo "# Linux NAT configuration file" \
 		> /etc/vmware/nat.conf
-	      echo -e "[host]" \
+	      echo "[host]" \
 		>> /etc/vmware/nat.conf
-	      echo -e "ip = $vmnet/$vmpx" \
+	      echo "ip = $vmnet/$vmpx" \
 		>> /etc/vmware/nat.conf
-	      echo -e "device = /dev/vmnet8" \
+	      echo "device = /dev/vmnet8" \
 		>> /etc/vmware/nat.conf
-	      echo -e "activeFTP = 1" \
+	      echo "activeFTP = 1" \
 		>> /etc/vmware/nat.conf
-	      echo -e "[udp]" \
+	      echo "[udp]" \
 		>> /etc/vmware/nat.conf
-	      echo -e "timeout = 60" \
+	      echo "timeout = 60" \
 		>> /etc/vmware/nat.conf
-	      echo -e "[incomingtcp]" \
+	      echo "[incomingtcp]" \
 		>> /etc/vmware/nat.conf
-	      echo -e "[incomingudp]" \
+	      echo "[incomingudp]" \
 		>> /etc/vmware/nat.conf
 	      echo "00:50:56:F1:30:50" > /etc/vmware/vmnet-natd-8.mac
 	fi
diff --git a/remote/rootfs/rootfs-stage32/data/opt/openslx/bin/penv b/remote/rootfs/rootfs-stage32/data/opt/openslx/bin/penv
index ca5a23ac..47a055ef 100755
--- a/remote/rootfs/rootfs-stage32/data/opt/openslx/bin/penv
+++ b/remote/rootfs/rootfs-stage32/data/opt/openslx/bin/penv
@@ -1,7 +1,7 @@
 #!/bin/sh
 
-[ "x$UID" != "x0" ] && echo "You need to be root." && exit 1
 [ "$#" -ne "1" ] && echo "Usage: $0 PID" && exit 1
-[ ! -d "/proc/$1/environ" ] && echo "No such process: $1" && exit 1
+[ ! -e "/proc/$1/environ" ] && echo "No such process: $1" && exit 1
+[ ! -r "/proc/$1/environ" ] && echo "Cannot open process: $1" && exit 1
 sed 's/\x0/\n/g' "/proc/$1/environ" | grep -E --color=auto '^[^=]*'
 
diff --git a/remote/rootfs/rootfs-stage32/data/opt/openslx/scripts/systemd-mount_export b/remote/rootfs/rootfs-stage32/data/opt/openslx/scripts/systemd-mount_export
index fd3e1b0a..c71dc9f6 100755
--- a/remote/rootfs/rootfs-stage32/data/opt/openslx/scripts/systemd-mount_export
+++ b/remote/rootfs/rootfs-stage32/data/opt/openslx/scripts/systemd-mount_export
@@ -9,18 +9,19 @@ mkdir -p "$MOUNTPOINT"
 
 if [[ "$SLX_STAGE4" == dnbd3* ]]; then
 	# dnbd3 it is
-	[ -z "${SLX_DNBD3_SERVERS}" ] && { echo "SLX_DNBD3_SERVERS empty or not set in /opt/openslx/config." && exit 1; }
+	[ -z "${SLX_DNBD3_SERVERS}${SLX_DNBD3_PRIO_SERVERS}" ] && { echo "SLX_DNBD3(_PRIO)_SERVERS empty or not set in /opt/openslx/config." && exit 1; }
 	# Randomize list
 	SERVERS=$(for SERVER in $SLX_DNBD3_SERVERS; do echo "$RANDOM $SERVER"; done | sort -u | sed -r 's/^[0-9]+ //')
 	IMAGE=$(echo $SLX_STAGE4 | awk '{printf $2}')
 	[ -e /var/run/dnbd3.socket ] || sleep 2 # Ugly, service should only start when dnbd3 daemon is up and running
 	RET=1337
-	for SRV in $SERVERS; do
+	for SRV in $SLX_DNBD3_PRIO_SERVERS $SERVERS; do
 		echo "Requesting $IMAGE from $SRV"
 		dnbd3=$(dnbd3-client -h "$SRV" -i "$IMAGE" -r 0)
 		RET=$?
 		[ "$RET" -eq "0" ] && break
 		echo "... didn't work ($RET)"
+		sleep 2
 	done
 	[ "$RET" -ne "0" ] && exit $RET
 	echo "Mounting $dnbd3 to $MOUNTPOINT"