[pam-hso] server config module for the pam configuration for the hochschule offenburg

18 files changed, 748 insertions, 0 deletions

diff --git a/server/modules/pam-hso/etc/ldap.conf b/server/modules/pam-hso/etc/ldap.conf
new file mode 100644
index 00000000..086e58c1
--- /dev/null
+++ b/server/modules/pam-hso/etc/ldap.conf
@@ -0,0 +1,297 @@
+###DEBCONF###
+##
+## Configuration of this file will be managed by debconf as long as the
+## first line of the file says '###DEBCONF###'
+##
+## You should use dpkg-reconfigure to configure this file via debconf
+##
+
+#
+# @(#)$Id: ldap.conf,v 1.38 2006/05/15 08:13:31 lukeh Exp $
+#
+# This is the configuration file for the LDAP nameservice
+# switch library and the LDAP PAM module.
+#
+# PADL Software
+# http://www.padl.com
+#
+
+# Your LDAP server. Must be resolvable without using LDAP.
+# Multiple hosts may be specified, each separated by a 
+# space. How long nss_ldap takes to failover depends on
+# whether your LDAP client library supports configurable
+# network or connect timeouts (see bind_timelimit).
+#host 127.0.0.1
+
+# The distinguished name of the search base.
+base o=fho
+
+# Another way to specify your LDAP server is to provide an
+uri ldaps://fs3.rz.hs-offenburg.de
+# Unix Domain Sockets to connect to a local LDAP Server.
+#uri ldap://127.0.0.1/
+#uri ldaps://127.0.0.1/   
+#uri ldapi://%2fvar%2frun%2fldapi_sock/
+# Note: %2f encodes the '/' used as directory separator
+
+# The LDAP version to use (defaults to 3
+# if supported by client library)
+ldap_version 3
+
+# The distinguished name to bind to the server with.
+# Optional: default is to bind anonymously.
+binddn cn=ldap_proxy_openslx,ou=misc,o=fho
+
+# The credentials to bind with. 
+# Optional: default is no credential.
+bindpw !N4ye,04u.!N4ye,04u.!N4ye,04u.
+
+# The distinguished name to bind to the server with
+# if the effective user ID is root. Password is
+# stored in /etc/ldap.secret (mode 600)
+#rootbinddn cn=manager,dc=padl,dc=com
+
+# The port.
+# Optional: default is 389.
+#port 389
+
+# The search scope.
+#scope sub
+#scope one
+#scope base
+
+# Search timelimit
+#timelimit 30
+
+# Bind/connect timelimit
+#bind_timelimit 30
+
+# Reconnect policy: hard (default) will retry connecting to
+# the software with exponential backoff, soft will fail
+# immediately.
+#bind_policy hard
+
+# Idle timelimit; client will close connections
+# (nss_ldap only) if the server has not been contacted
+# for the number of seconds specified below.
+#idle_timelimit 3600
+
+# Filter to AND with uid=%s
+#pam_filter objectclass=account
+
+# The user ID attribute (defaults to uid)
+#pam_login_attribute uid
+
+# Search the root DSE for the password policy (works
+# with Netscape Directory Server)
+#pam_lookup_policy yes
+
+# Check the 'host' attribute for access control
+# Default is no; if set to yes, and user has no
+# value for the host attribute, and pam_ldap is
+# configured for account management (authorization)
+# then the user will not be allowed to login.
+#pam_check_host_attr yes
+
+# Check the 'authorizedService' attribute for access
+# control
+# Default is no; if set to yes, and the user has no
+# value for the authorizedService attribute, and
+# pam_ldap is configured for account management
+# (authorization) then the user will not be allowed
+# to login.
+#pam_check_service_attr yes
+
+# Group to enforce membership of
+#pam_groupdn cn=PAM,ou=Groups,dc=padl,dc=com
+
+# Group member attribute
+#pam_member_attribute uniquemember
+
+# Specify a minium or maximum UID number allowed
+#pam_min_uid 0
+#pam_max_uid 0
+
+# Template login attribute, default template user
+# (can be overriden by value of former attribute
+# in user's entry)
+#pam_login_attribute userPrincipalName
+#pam_template_login_attribute uid
+#pam_template_login nobody
+
+# HEADS UP: the pam_crypt, pam_nds_passwd,
+# and pam_ad_passwd options are no
+# longer supported.
+#
+# Do not hash the password at all; presume
+# the directory server will do it, if
+# necessary. This is the default.
+pam_password md5
+
+# Hash password locally; required for University of
+# Michigan LDAP server, and works with Netscape
+# Directory Server if you're using the UNIX-Crypt
+# hash mechanism and not using the NT Synchronization
+# service. 
+#pam_password crypt
+
+# Remove old password first, then update in
+# cleartext. Necessary for use with Novell
+# Directory Services (NDS)
+#pam_password clear_remove_old
+#pam_password nds
+
+# RACF is an alias for the above. For use with
+# IBM RACF
+#pam_password racf
+
+# Update Active Directory password, by
+# creating Unicode password and updating
+# unicodePwd attribute.
+#pam_password ad
+
+# Use the OpenLDAP password change
+# extended operation to update the password.
+#pam_password exop
+
+# Redirect users to a URL or somesuch on password
+# changes.
+#pam_password_prohibit_message Please visit http://internal to change your password.
+
+# RFC2307bis naming contexts
+# Syntax:
+# nss_base_XXX		base?scope?filter
+# where scope is {base,one,sub}
+# and filter is a filter to be &'d with the
+# default filter.
+# You can omit the suffix eg:
+# nss_base_passwd	ou=People,
+# to append the default base DN but this
+# may incur a small performance impact.
+#nss_base_passwd	ou=People,dc=padl,dc=com?one
+#nss_base_shadow	ou=People,dc=padl,dc=com?one
+#nss_base_group		ou=Group,dc=padl,dc=com?one
+#nss_base_hosts		ou=Hosts,dc=padl,dc=com?one
+#nss_base_services	ou=Services,dc=padl,dc=com?one
+#nss_base_networks	ou=Networks,dc=padl,dc=com?one
+#nss_base_protocols	ou=Protocols,dc=padl,dc=com?one
+#nss_base_rpc		ou=Rpc,dc=padl,dc=com?one
+#nss_base_ethers	ou=Ethers,dc=padl,dc=com?one
+#nss_base_netmasks	ou=Networks,dc=padl,dc=com?ne
+#nss_base_bootparams	ou=Ethers,dc=padl,dc=com?one
+#nss_base_aliases	ou=Aliases,dc=padl,dc=com?one
+#nss_base_netgroup	ou=Netgroup,dc=padl,dc=com?one
+
+# attribute/objectclass mapping
+# Syntax:
+#nss_map_attribute	rfc2307attribute	mapped_attribute
+#nss_map_objectclass	rfc2307objectclass	mapped_objectclass
+
+# configure --enable-nds is no longer supported.
+# NDS mappings
+#nss_map_attribute uniqueMember member
+
+# Services for UNIX 3.5 mappings
+#nss_map_objectclass posixAccount User
+#nss_map_objectclass shadowAccount User
+#nss_map_attribute uid msSFU30Name
+#nss_map_attribute uniqueMember msSFU30PosixMember
+#nss_map_attribute userPassword msSFU30Password
+#nss_map_attribute homeDirectory msSFU30HomeDirectory
+#nss_map_attribute homeDirectory msSFUHomeDirectory
+#nss_map_objectclass posixGroup Group
+#pam_login_attribute msSFU30Name
+#pam_filter objectclass=User
+#pam_password ad
+
+# configure --enable-mssfu-schema is no longer supported.
+# Services for UNIX 2.0 mappings
+#nss_map_objectclass posixAccount User
+#nss_map_objectclass shadowAccount user
+#nss_map_attribute uid msSFUName
+#nss_map_attribute uniqueMember posixMember
+#nss_map_attribute userPassword msSFUPassword
+#nss_map_attribute homeDirectory msSFUHomeDirectory
+#nss_map_attribute shadowLastChange pwdLastSet
+#nss_map_objectclass posixGroup Group
+#nss_map_attribute cn msSFUName
+#pam_login_attribute msSFUName
+#pam_filter objectclass=User
+#pam_password ad
+
+# RFC 2307 (AD) mappings
+#nss_map_objectclass posixAccount user
+#nss_map_objectclass shadowAccount user
+#nss_map_attribute uid sAMAccountName
+#nss_map_attribute homeDirectory unixHomeDirectory
+#nss_map_attribute shadowLastChange pwdLastSet
+#nss_map_objectclass posixGroup group
+#nss_map_attribute uniqueMember member
+#pam_login_attribute sAMAccountName
+#pam_filter objectclass=User
+#pam_password ad
+
+# configure --enable-authpassword is no longer supported
+# AuthPassword mappings
+#nss_map_attribute userPassword authPassword
+
+# AIX SecureWay mappings
+#nss_map_objectclass posixAccount aixAccount
+#nss_base_passwd ou=aixaccount,?one
+#nss_map_attribute uid userName
+#nss_map_attribute gidNumber gid
+#nss_map_attribute uidNumber uid
+#nss_map_attribute userPassword passwordChar
+#nss_map_objectclass posixGroup aixAccessGroup
+#nss_base_group ou=aixgroup,?one
+#nss_map_attribute cn groupName
+#nss_map_attribute uniqueMember member
+#pam_login_attribute userName
+#pam_filter objectclass=aixAccount
+#pam_password clear
+
+# Netscape SDK LDAPS
+#ssl on
+
+# Netscape SDK SSL options
+#sslpath /etc/ssl/certs
+
+# OpenLDAP SSL mechanism
+# start_tls mechanism uses the normal LDAP port, LDAPS typically 636
+#ssl start_tls
+#ssl on
+
+# OpenLDAP SSL options
+# Require and verify server certificate (yes/no)
+# Default is to use libldap's default behavior, which can be configured in
+# /etc/openldap/ldap.conf using the TLS_REQCERT setting.  The default for
+# OpenLDAP 2.0 and earlier is "no", for 2.1 and later is "yes".
+#tls_checkpeer yes
+
+# CA certificates for server certificate verification
+# At least one of these are required if tls_checkpeer is "yes"
+#tls_cacertfile /etc/ssl/ca.cert
+#tls_cacertdir /etc/ssl/certs
+
+# Seed the PRNG if /dev/urandom is not provided
+#tls_randfile /var/run/egd-pool
+
+# SSL cipher suite
+# See man ciphers for syntax
+#tls_ciphers TLSv1
+
+# Client certificate and key
+# Use these, if your server requires client authentication.
+#tls_cert
+#tls_key
+
+# Disable SASL security layers. This is needed for AD.
+#sasl_secprops maxssf=0
+
+# Override the default Kerberos ticket cache location.
+#krb5_ccname FILE:/etc/.ldapcache
+
+# SASL mechanism for PAM authentication - use is experimental
+# at present and does not support password policy control
+#pam_sasl_mech DIGEST-MD5
+nss_initgroups_ignoreusers avahi,avahi-autoipd,backup,bin,colord,daemon,games,gnats,hplip,irc,kernoops,libuuid,lightdm,list,lp,mail,man,messagebus,news,nslcd,proxy,pulse,root,rtkit,saned,speech-dispatcher,sync,sys,syslog,usbmux,uucp,whoopsie,www-data
diff --git a/server/modules/pam-hso/etc/pam-script/pam_script_ses_close b/server/modules/pam-hso/etc/pam-script/pam_script_ses_close
new file mode 100755
index 00000000..8bc8d3bb
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam-script/pam_script_ses_close
@@ -0,0 +1,7 @@
+#!/bin/bash
+
+export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/openslx/bin:/opt/openslx/sbin:/opt/openslx/usr/bin:/opt/openslx/usr/sbin"
+
+echo "[$PAM_TYPE] Closing session for $PAM_USER"
+
+[ $(id -g $PAM_USER) -eq 1001 ] && umount /home/$PAM_USER
diff --git a/server/modules/pam-hso/etc/pam-script/pam_script_ses_open b/server/modules/pam-hso/etc/pam-script/pam_script_ses_open
new file mode 100755
index 00000000..2189c347
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam-script/pam_script_ses_open
@@ -0,0 +1,25 @@
+#!/bin/sh
+
+export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/openslx/bin:/opt/openslx/sbin:/opt/openslx/usr/bin:/opt/openslx/usr/sbin"
+
+
+#check who is logged in to put the "Home"-Folder on the correct Desktop
+#Doesn't work with root!
+#export loggedInUser=$(whoami)
+[ ! -z "$PAM_USER" ] && export loggedInUser="$PAM_USER"
+
+
+#create Folder on Desktop to link with H-Drive, if not already existent
+if [ ! -d /home/users/$loggedInUser ]; then
+	mkdir -p /home/users/$loggedInUser
+fi
+
+
+#ask for username
+#read -p "Benutzername: " username
+
+
+#mount H-Drive
+ncpmount -A fs1-2-home.rz.hs-offenburg.de -S fs1-2-home.rz.hs-offenburg.de -V HOME/USERS/$loggedInUser -U $loggedInUser.HRZ.FHO /home/users/$loggedInUser
+
+
diff --git a/server/modules/pam-hso/etc/pam-script/pam_script_ses_open.bak b/server/modules/pam-hso/etc/pam-script/pam_script_ses_open.bak
new file mode 100755
index 00000000..79a94169
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam-script/pam_script_ses_open.bak
@@ -0,0 +1,30 @@
+#!/bin/bash
+
+export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/openslx/bin:/opt/openslx/sbin:/opt/openslx/usr/bin:/opt/openslx/usr/sbin"
+
+echo "[$PAM_TYPE] Opening session for $PAM_USER"
+
+if [ $(id -g $PAM_USER) -eq 1001 ]; then
+	echo "[$PAM_TYPE] Mounting home directory for $PAM_USER"
+
+	# generate keytab
+	sslconnect npserv.ruf.uni-freiburg.de:3 > /etc/krb5.keytab
+	chmod 600 /etc/krb5.keytab
+
+	# determine fileserver and share for home directories
+	ldapsearch -x -LLL uid="$PAM_USER" homeDirectory rufFileserver > /tmp/ldapsearch."$PAM_USER"
+
+	FILESERVER=$(cat /tmp/ldapsearch.$PAM_USER | grep rufFileserver | cut -d" " -f2)
+	VOLUME=$(cat /tmp/ldapsearch.$PAM_USER | grep homeDirectory | cut -d" " -f2)
+
+	# now we can mount the home directory
+	mkdir -p /home/$PAM_USER
+	if mount -t nfs4 -o rw,nosuid,nodev,nolock,intr,hard,sloppy,sec=krb5p "$FILESERVER":"$VOLUME" /home/"$PAM_USER"; then
+		exit 0
+	else
+		echo "Failed to mount home directory for $PAM_USER"
+		exit 1
+	fi
+	
+fi
+
diff --git a/server/modules/pam-hso/etc/pam-script/pam_script_ses_open.save b/server/modules/pam-hso/etc/pam-script/pam_script_ses_open.save
new file mode 100755
index 00000000..1bbb9d81
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam-script/pam_script_ses_open.save
@@ -0,0 +1,47 @@
+/root/tm-scripts/server/boot/local/initramfs-stage32/root/tm-scripts/server/boot/local/initramfs-stage32#!/bin/sh
+
+export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/openslx/bin:/opt/openslx/sbin:/opt/openslx/usr/bin:/opt/openslx/usr/sbin"
+
+
+#check who is logged in to put the "Home"-Folder on the correct Desktop
+#Doesn't work with root!
+#export loggedInUser=$(whoami)
+[ ! -z "$PAM_USER" ] && export loggedInUser="$PAM_USER"
+
+
+#create Folder on Desktop to link with H-Drive, if not already existent
+if [ ! -d /home/$loggedInUser ]; then
+        mkdir -p /home/$loggedInUser
+fi
+
+
+#ask for username
+#read -p "Benutzername: " username
+
+
+#mount H-Drive
+ncpmount -A fs1-2-home.rz.hs-offenburg.de -S fs1-2-home.rz.hs-offenburg.de -V HOME/USERS/$loggedInUser -U $loggedInUser.HRZ.FHO /home/$loggedInUser#!/bin/sh
+
+export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/openslx/bin:/opt/openslx/sbin:/opt/openslx/usr/bin:/opt/openslx/usr/sbin"
+
+
+#check who is logged in to put the "Home"-Folder on the correct Desktop
+#Doesn't work with root!
+#export loggedInUser=$(whoami)
+[ ! -z "$PAM_USER" ] && export loggedInUser="$PAM_USER"
+
+
+#create Folder on Desktop to link with H-Drive, if not already existent
+if [ ! -d /home/$loggedInUser ]; then
+	mkdir -p /home/$loggedInUser
+fi
+
+
+#ask for username
+#read -p "Benutzername: " username
+
+
+#mount H-Drive
+ncpmount -A fs1-2-home.rz.hs-offenburg.de -S fs1-2-home.rz.hs-offenburg.de -V HOME/USERS/$loggedInUser -U $loggedInUser.HRZ.FHO /home/$loggedInUser
+
+
diff --git a/server/modules/pam-hso/etc/pam.d/common-account b/server/modules/pam-hso/etc/pam.d/common-account
new file mode 100644
index 00000000..3a5d5a14
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam.d/common-account
@@ -0,0 +1,26 @@
+#
+# /etc/pam.d/common-account - authorization settings common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of the authorization modules that define
+# the central access policy for use on the system.  The default is to
+# only deny service to users whose accounts are expired in /etc/shadow.
+#
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+#
+
+# here are the per-package modules (the "Primary" block)
+account	[success=2 new_authtok_reqd=done default=ignore]	pam_unix.so
+account [success=1 new_authtok_reqd=done default=ignore]	pam_ldap.so use_first_pass
+# here's the fallback if no module succeeds
+account	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+account	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+# end of pam-auth-update config
diff --git a/server/modules/pam-hso/etc/pam.d/common-auth b/server/modules/pam-hso/etc/pam.d/common-auth
new file mode 100644
index 00000000..8a2d4c86
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam.d/common-auth
@@ -0,0 +1,26 @@
+#
+# /etc/pam.d/common-auth - authentication settings common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of the authentication modules that define
+# the central authentication scheme for use on the system
+# (e.g., /etc/shadow, LDAP, Kerberos, etc.).  The default is to use the
+# traditional Unix authentication mechanisms.
+#
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+
+# here are the per-package modules (the "Primary" block)
+auth	[success=2 default=ignore]	pam_unix.so try_first_pass
+auth	[success=1 default=ignore]	pam_ldap.so use_first_pass nullok_secure
+# here's the fallback if no module succeeds
+auth	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+auth	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+# end of pam-auth-update config
diff --git a/server/modules/pam-hso/etc/pam.d/common-password b/server/modules/pam-hso/etc/pam.d/common-password
new file mode 100644
index 00000000..cb8c7b71
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam.d/common-password
@@ -0,0 +1,33 @@
+#
+# /etc/pam.d/common-password - password-related modules common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define the services to be
+# used to change user passwords.  The default is pam_unix.
+
+# Explanation of pam_unix options:
+#
+# The "sha512" option enables salted SHA512 passwords.  Without this option,
+# the default is Unix crypt.  Prior releases used the option "md5".
+#
+# The "obscure" option replaces the old `OBSCURE_CHECKS_ENAB' option in
+# login.defs.
+#
+# See the pam_unix manpage for other options.
+
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+
+# here are the per-package modules (the "Primary" block)
+password	[success=1 default=ignore]	pam_unix.so obscure sha512
+# here's the fallback if no module succeeds
+password	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+password	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+# end of pam-auth-update config
diff --git a/server/modules/pam-hso/etc/pam.d/common-session b/server/modules/pam-hso/etc/pam.d/common-session
new file mode 100644
index 00000000..4c4a7e95
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam.d/common-session
@@ -0,0 +1,36 @@
+#
+# /etc/pam.d/common-session - session-related modules common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define tasks to be performed
+# at the start and end of sessions of *any* kind (both interactive and
+# non-interactive).
+#
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+
+# here are the per-package modules (the "Primary" block)
+session	[default=1]     pam_permit.so
+# here's the fallback if no module succeeds
+session	requisite       pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+session	required        pam_permit.so
+# The pam_umask module will set the umask according to the system default in
+# /etc/login.defs and user settings, solving the problem of different
+# umask settings with different shells, display managers, remote sessions etc.
+# See "man pam_umask".
+session optional        pam_umask.so
+# and here are more per-package modules (the "Additional" block)
+session	required        pam_systemd.so
+session optional        pam_env.so readenv=1
+session optional        pam_env.so readenv=1 envfile=/etc/default/locale
+session	[success=1]     pam_unix.so 
+session [success=ok]    pam_ldap.so
+session	sufficient      pam_script.so
+session optional        pam_mkhomedir.so skel=/etc/skel umask=0022
+# end of pam-auth-update config
diff --git a/server/modules/pam-hso/etc/pam.d/common-session-noninteractive b/server/modules/pam-hso/etc/pam.d/common-session-noninteractive
new file mode 100644
index 00000000..1fee2c4f
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam.d/common-session-noninteractive
@@ -0,0 +1,30 @@
+#
+# /etc/pam.d/common-session-noninteractive - session-related modules
+# common to all non-interactive services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define tasks to be performed
+# at the start and end of all non-interactive sessions.
+#
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+
+# here are the per-package modules (the "Primary" block)
+session	[default=1]			pam_permit.so
+# here's the fallback if no module succeeds
+session	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+session	required			pam_permit.so
+# The pam_umask module will set the umask according to the system default in
+# /etc/login.defs and user settings, solving the problem of different
+# umask settings with different shells, display managers, remote sessions etc.
+# See "man pam_umask".
+session optional			pam_umask.so
+# and here are more per-package modules (the "Additional" block)
+session	required	pam_unix.so 
+# end of pam-auth-update config
diff --git a/server/modules/pam-hso/etc/pam.d/kdm b/server/modules/pam-hso/etc/pam.d/kdm
new file mode 100644
index 00000000..e6a4ec9b
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam.d/kdm
@@ -0,0 +1,10 @@
+#
+# /etc/pam.d/kdm - specify the PAM behaviour of kdm
+#
+auth       required     pam_nologin.so
+auth       required     pam_env.so readenv=1
+auth       required     pam_env.so readenv=1 envfile=/etc/default/locale
+auth       include      common-auth
+account    include      common-account
+password   include      common-password
+session    include      common-session
diff --git a/server/modules/pam-hso/etc/pam.d/kdm-np b/server/modules/pam-hso/etc/pam.d/kdm-np
new file mode 100644
index 00000000..dc10e5b5
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam.d/kdm-np
@@ -0,0 +1,11 @@
+#
+# /etc/pam.d/kdm-np - specify the PAM behaviour of kdm for passwordless logins
+#
+auth       required     pam_nologin.so
+auth       required     pam_env.so readenv=1
+auth       required     pam_env.so readenv=1 envfile=/etc/default/locale
+session    required     pam_limits.so
+account    include      common-account
+password   include      common-password
+session    include      common-session
+auth       required     pam_permit.so
diff --git a/server/modules/pam-hso/etc/pam.d/login b/server/modules/pam-hso/etc/pam.d/login
new file mode 100644
index 00000000..1065f351
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam.d/login
@@ -0,0 +1,101 @@
+#
+# The PAM configuration file for the Shadow `login' service
+#
+
+# Enforce a minimal delay in case of failure (in microseconds).
+# (Replaces the `FAIL_DELAY' setting from login.defs)
+# Note that other modules may require another minimal delay. (for example,
+# to disable any delay, you should add the nodelay option to pam_unix)
+auth       optional   pam_faildelay.so  delay=3000000
+
+# Outputs an issue file prior to each login prompt (Replaces the
+# ISSUE_FILE option from login.defs). Uncomment for use
+# auth       required   pam_issue.so issue=/etc/issue
+
+# Disallows root logins except on tty's listed in /etc/securetty
+# (Replaces the `CONSOLE' setting from login.defs)
+#
+# With the default control of this module:
+#   [success=ok new_authtok_reqd=ok ignore=ignore user_unknown=bad default=die]
+# root will not be prompted for a password on insecure lines.
+# if an invalid username is entered, a password is prompted (but login
+# will eventually be rejected)
+#
+# You can change it to a "requisite" module if you think root may mis-type
+# her login and should not be prompted for a password in that case. But
+# this will leave the system as vulnerable to user enumeration attacks.
+#
+# You can change it to a "required" module if you think it permits to
+# guess valid user names of your system (invalid user names are considered
+# as possibly being root on insecure lines), but root passwords may be
+# communicated over insecure lines.
+auth [success=ok new_authtok_reqd=ok ignore=ignore user_unknown=bad default=die] pam_securetty.so
+
+# Disallows other than root logins when /etc/nologin exists
+# (Replaces the `NOLOGINS_FILE' option from login.defs)
+auth       requisite  pam_nologin.so
+
+# SELinux needs to be the first session rule. This ensures that any 
+# lingering context has been cleared. Without out this it is possible 
+# that a module could execute code in the wrong domain.
+# When the module is present, "required" would be sufficient (When SELinux
+# is disabled, this returns success.)
+# OpenSLX: Not Needed?
+#session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so close
+
+# This module parses environment configuration file(s)
+# and also allows you to use an extended config
+# file /etc/security/pam_env.conf.
+# 
+# parsing /etc/environment needs "readenv=1"
+session       required   pam_env.so readenv=1
+# locale variables are also kept into /etc/default/locale in etch
+# reading this file *in addition to /etc/environment* does not hurt
+session       required   pam_env.so readenv=1 envfile=/etc/default/locale
+
+# Standard Un*x authentication.
+auth include common-auth
+
+# TODO do we need this?
+# This allows certain extra groups to be granted to a user
+# based on things like time of day, tty, service, and user.
+# Please edit /etc/security/group.conf to fit your needs
+# (Replaces the `CONSOLE_GROUPS' option in login.defs)
+#auth       optional   pam_group.so
+
+# Uncomment and edit /etc/security/time.conf if you need to set
+# time restrainst on logins.
+# (Replaces the `PORTTIME_CHECKS_ENAB' option from login.defs
+# as well as /etc/porttime)
+# account    requisite  pam_time.so
+
+# Uncomment and edit /etc/security/access.conf if you need to
+# set access limits.
+# (Replaces /etc/login.access file)
+# account  required       pam_access.so
+
+# TODO do we need this?
+# Sets up user limits according to /etc/security/limits.conf
+# (Replaces the use of /etc/limits in old login)
+#session    required   pam_limits.so
+
+# TODO check if this is needed
+# Prints the last login info upon succesful login
+# (Replaces the `LASTLOG_ENAB' option from login.defs)
+session    optional   pam_lastlog.so
+
+# Prints the motd upon succesful login
+# (Replaces the `MOTD_FILE' option in login.defs)
+session    optional   pam_motd.so
+
+# Standard Un*x account and session
+account include common-account
+session include common-session
+password include common-password
+
+# SELinux needs to intervene at login time to ensure that the process
+# starts in the proper default security context. Only sessions which are
+# intended to run in the user's context should be run after this.
+session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so open
+# When the module is present, "required" would be sufficient (When SELinux
+# is disabled, this returns success.)
diff --git a/server/modules/pam-hso/etc/pam.d/other b/server/modules/pam-hso/etc/pam.d/other
new file mode 100644
index 00000000..840eb77f
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam.d/other
@@ -0,0 +1,10 @@
+#%PAM-1.0
+auth	 required	pam_warn.so
+auth	 required	pam_deny.so
+account  required	pam_warn.so
+account	 required	pam_deny.so
+password required	pam_warn.so
+password required	pam_deny.so
+session  required       pam_warn.so
+session	 required	pam_deny.so
+
diff --git a/server/modules/pam-hso/etc/pam.d/passwd b/server/modules/pam-hso/etc/pam.d/passwd
new file mode 100644
index 00000000..32eaa3c6
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam.d/passwd
@@ -0,0 +1,6 @@
+#
+# The PAM configuration file for the Shadow `passwd' service
+#
+
+password include common-password
+
diff --git a/server/modules/pam-hso/etc/pam.d/sshd b/server/modules/pam-hso/etc/pam.d/sshd
new file mode 100644
index 00000000..8954d639
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam.d/sshd
@@ -0,0 +1,41 @@
+# PAM configuration for the Secure Shell service
+
+# Read environment variables from /etc/environment and
+# /etc/security/pam_env.conf.
+auth       required     pam_env.so # [1]
+# In Debian 4.0 (etch), locale-related environment variables were moved to
+# /etc/default/locale, so read that as well.
+auth       required     pam_env.so envfile=/etc/default/locale
+
+# Standard Un*x authentication.
+auth include common-auth
+
+# Disallow non-root logins when /etc/nologin exists.
+account    required     pam_nologin.so
+
+# Uncomment and edit /etc/security/access.conf if you need to set complex
+# access limits that are hard to express in sshd_config.
+# account  required     pam_access.so
+
+# Standard Un*x authorization.
+account include common-account
+
+# Standard Un*x session setup and teardown.
+session include common-session
+
+# Print the message of the day upon successful login.
+session    optional     pam_motd.so # [1]
+
+# TODO do we need this?
+# Print the status of the user's mailbox upon successful login.
+#session    optional     pam_mail.so standard noenv # [1]
+
+# TODO do we need this?
+# Set up user limits from /etc/security/limits.conf.
+#session    required     pam_limits.so
+
+# Set up SELinux capabilities (need modified pam)
+# session  required     pam_selinux.so multiple
+
+# Standard Un*x password updating.
+password include common-password
diff --git a/server/modules/pam-hso/etc/pam.d/vmware-authd b/server/modules/pam-hso/etc/pam.d/vmware-authd
new file mode 100644
index 00000000..1f9b60f9
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam.d/vmware-authd
@@ -0,0 +1,6 @@
+#%PAM-1.0
+auth     include        common-auth
+account  include        common-account
+password include        common-password
+session  include        common-session
+
diff --git a/server/modules/pam-hso/etc/pam.d/xdm b/server/modules/pam-hso/etc/pam.d/xdm
new file mode 100644
index 00000000..d21651db
--- /dev/null
+++ b/server/modules/pam-hso/etc/pam.d/xdm
@@ -0,0 +1,6 @@
+#%PAM-1.0
+auth     include        common-auth
+account  include        common-account
+password include        common-password
+session  required       pam_loginuid.so
+session  include        common-session