diff options
Diffstat (limited to 'remote/modules/vmplayer/data/etc/vmware/vmnet8')
4 files changed, 111 insertions, 0 deletions
diff --git a/remote/modules/vmplayer/data/etc/vmware/vmnet8/dhcpd/dhcpd.conf b/remote/modules/vmplayer/data/etc/vmware/vmnet8/dhcpd/dhcpd.conf new file mode 100644 index 00000000..9f27b6f0 --- /dev/null +++ b/remote/modules/vmplayer/data/etc/vmware/vmnet8/dhcpd/dhcpd.conf @@ -0,0 +1,43 @@ +# Configuration file for ISC 2.0 vmnet-dhcpd operating on vmnet8. +# +# This file was automatically generated by the VMware configuration program. +# See Instructions below if you want to modify it. +# +# We set domain-name-servers to make some DHCP clients happy +# (dhclient as configured in SuSE, TurboLinux, etc.). +# We also supply a domain name to make pump (Red Hat 6.x) happy. +# + + +###### VMNET DHCP Configuration. Start of "DO NOT MODIFY SECTION" ##### +# Modification Instructions: This section of the configuration file contains +# information generated by the configuration program. Do not modify this +# section. +# You are free to modify everything else. Also, this section must start +# on a new line +# This file will get backed up with a different name in the same directory +# if this section is edited and you try to configure DHCP again. + +# Written at: 05/06/2013 17:43:41 +allow unknown-clients; +default-lease-time 1800; # default is 30 minutes +max-lease-time 7200; # default is 2 hours + +subnet 192.168.167.0 netmask 255.255.255.0 { + range 192.168.167.128 192.168.167.254; + option broadcast-address 192.168.167.255; + option domain-name-servers 192.168.167.2; + option domain-name localdomain; + default-lease-time 1800; # default is 30 minutes + max-lease-time 7200; # default is 2 hours + option netbios-name-servers 192.168.167.2; + option routers 192.168.167.2; +} +host vmnet8 { + hardware ethernet 00:50:56:C0:00:08; + fixed-address 192.168.167.1; + option domain-name-servers 0.0.0.0; + option domain-name ""; + option routers 0.0.0.0; +} +####### VMNET DHCP Configuration. End of "DO NOT MODIFY SECTION" ####### diff --git a/remote/modules/vmplayer/data/etc/vmware/vmnet8/dhcpd/dhcpd.leases b/remote/modules/vmplayer/data/etc/vmware/vmnet8/dhcpd/dhcpd.leases new file mode 100644 index 00000000..512c0de2 --- /dev/null +++ b/remote/modules/vmplayer/data/etc/vmware/vmnet8/dhcpd/dhcpd.leases @@ -0,0 +1,7 @@ +# All times in this file are in UTC (GMT), not your local timezone. This is +# not a bug, so please don't ask about it. There is no portable way to +# store leases in the local timezone, so please don't request this as a +# feature. If this is inconvenient or confusing to you, we sincerely +# apologize. Seriously, though - don't ask. +# The format of this file is documented in the dhcpd.leases(5) manual page. + diff --git a/remote/modules/vmplayer/data/etc/vmware/vmnet8/nat.mac b/remote/modules/vmplayer/data/etc/vmware/vmnet8/nat.mac new file mode 100644 index 00000000..337d094a --- /dev/null +++ b/remote/modules/vmplayer/data/etc/vmware/vmnet8/nat.mac @@ -0,0 +1 @@ +00:50:56:E9:43:27 diff --git a/remote/modules/vmplayer/data/etc/vmware/vmnet8/nat/nat.conf b/remote/modules/vmplayer/data/etc/vmware/vmnet8/nat/nat.conf new file mode 100644 index 00000000..791f9a7e --- /dev/null +++ b/remote/modules/vmplayer/data/etc/vmware/vmnet8/nat/nat.conf @@ -0,0 +1,60 @@ +# VMware NAT configuration file + +[host] + +# NAT gateway address +ip = 192.168.167.2 +netmask = 255.255.255.0 + +# VMnet device if not specified on command line +device = /dev/vmnet8 + +# Allow PORT/EPRT FTP commands (they need incoming TCP stream ...) +activeFTP = 1 + +# Allows the source to have any OUI. Turn this on if you change the OUI +# in the MAC address of your virtual machines. +allowAnyOUI = 1 + +# Controls if (TCP) connections should be reset when the adapter they are +# bound to goes down +resetConnectionOnLinkDown = 1 + +# Controls if (TCP) connection should be reset when guest packet's destination +# is NAT's IP address +resetConnectionOnDestLocalHost = 1 + +[tcp] + +# Value of timeout in TCP TIME_WAIT state, in seconds +timeWaitTimeout = 30 + +[udp] + +# Timeout in seconds. Dynamically-created UDP mappings will purged if +# idle for this duration of time 0 = no timeout, default = 60; real +# value might be up to 100% longer +timeout = 60 + +[netbios] +# Timeout for NBNS queries. +nbnsTimeout = 2 + +# Number of retries for each NBNS query. +nbnsRetries = 3 + +# Timeout for NBDS queries. +nbdsTimeout = 3 + +[incomingtcp] + +# Use these with care - anyone can enter into your VM through these... +# The format and example are as follows: +#<external port number> = <VM's IP address>:<VM's port number> +#8080 = 172.16.3.128:80 + +[incomingudp] + +# UDP port forwarding example +#6000 = 172.16.3.0:6001 + |