diff options
Diffstat (limited to 'remote/modules/vmplayer/data')
| -rw-r--r-- | remote/modules/vmplayer/data/etc/openslx/vmware/nvram | bin | 0 -> 8664 bytes | |||
| -rw-r--r-- | remote/modules/vmplayer/data/etc/openslx/vmware/run-virt.include | 530 | ||||
| -rwxr-xr-x | remote/modules/vmplayer/data/etc/openslx/vmware/vmware-env | 125 | ||||
| -rw-r--r-- | remote/modules/vmplayer/data/etc/openslx/vmware/vmware.conf | 8 | ||||
| -rw-r--r-- | remote/modules/vmplayer/data/etc/systemd/system/vmware.service | 8 | ||||
| -rwxr-xr-x | remote/modules/vmplayer/data/opt/openslx/bin/vmplayer | 21 | ||||
| -rwxr-xr-x | remote/modules/vmplayer/data/opt/openslx/bin/vmware | 11 |
7 files changed, 703 insertions, 0 deletions
diff --git a/remote/modules/vmplayer/data/etc/openslx/vmware/nvram b/remote/modules/vmplayer/data/etc/openslx/vmware/nvram Binary files differnew file mode 100644 index 00000000..85125f1e --- /dev/null +++ b/remote/modules/vmplayer/data/etc/openslx/vmware/nvram diff --git a/remote/modules/vmplayer/data/etc/openslx/vmware/run-virt.include b/remote/modules/vmplayer/data/etc/openslx/vmware/run-virt.include new file mode 100644 index 00000000..65db53da --- /dev/null +++ b/remote/modules/vmplayer/data/etc/openslx/vmware/run-virt.include @@ -0,0 +1,530 @@ +# run-virt.include +# ----------------------------------------------------------------------------- +# Copyright (c) 2009..2012 - RZ Uni Freiburg +# Copyright (c) 2009..2013 - OpenSLX GmbH +# +# This program is free software distributed under the GPL version 2. +# See http://openslx.org/COPYING +# +# If you have any feedback please consult http://openslx.org/feedback and +# send your suggestions, praise, or complaints to feedback@openslx.org +# +# General information about OpenSLX can be found at http://openslx.org/ +# ----------------------------------------------------------------------------- +# run-virt.include +# - component for vmware/player of the vmchooser plugin run-virt.sh +################################################################################ + +# configuration writer functions +################################################################################ + +runvmwareconfheader () +{ +echo "# This configuration file was generated by $0" >${conffile} + +# check for the ostype +case "${vmostype}" in + win31*) + mem="32" + cpu_cores="1" + sound="sb16" + shfolders="FALSE" + ;; + win95*) + mem="92" + cpu_cores="1" + shfolders="FALSE" + ;; + win98*|winme*) + mem="256" + cpu_cores="1" + shfolders="FALSE" + ;; + winxp*|windowsxp*) + shfolders="TRUE" + ;; + winvista*|windowsvista*) + shfolders="TRUE" + ;; + windows7*) + shfolders="TRUE" + ;; + windows8*) + shfolders="TRUE" + ;; + linux*|*ubuntu*|*suse*|debian*|*sci*) + vmostype="linux" + shfolders="TRUE" + ;; + macos*) + cpu_cores="1" + vmostype="other" + shfolders="FALSE" + ;; + beos*) + cpu_cores="1" + vmostype="other" + shfolders="FALSE" + ;; + *) + vmostype="other" + shfolders="FALSE" + ;; +esac +case "$vmversion" in + *) + svga_autodetect="TRUE" + numvcpus="1" + echo ".encoding = \"UTF-8\" +# version specific stuff - all versions +config.version = \"8\"" >>${conffile} + ;; +esac +case "$vmversion" in + 2.*|3.*|4.*|5.*|6.*|7.*|8.*|9.*) + [ ${shfolders} == FALSE ] || echo " +# version specific stuff - ver. 2.*|3.*|6.*|7.*|8.*|9.* +sharedFolder.option = \"alwaysEnabled\"" >>${conffile} + ;; +esac +case "$vmversion" in + 2.5|3.*|4.*|5.*|6.5|7.*|8.*|9.*) + if [ "${cpu_cores}" -ge "2" 2>/dev/null ]; then + numvcpus="2" + fi + if [ "${mem}" -ge "8000" 2>/dev/null ]; then + mem=8000 + fi + cap3d="TRUE" # helper var for loging output + echo " +# version specific stuff - ver. 2.5|3.*|6.5|7.* +ehci.present = \"TRUE\" +mks.enable3d = \"${enable3d}\"" >>${conffile} + ;; +esac +case "$vmversion" in + 3.*|4.*|7.*|8.*|9.*) + numvcpus="${cpu_cores}" + if [ "${cpu_cores}" -ge "4" 2>/dev/null ]; then + numvcpus="4" + fi + # svga_autodetect="FALSE" # if defined manual, see below + echo " +# version specific stuff - ver. 3.*|7.* +cpuid.coresPerSocket = \"${cpu_cores}\" +maxvcpus = \"4\" +monitor.virtual_mmu = \"automatic\" +monitor.virtual_exec = \"automatic\" +floppy1.clientDevice = \"FALSE\" +floppy1.readonly = \"TRUE\"" >>${conffile} + ;; +esac + +echo " +# id +virtualHW.version = \"${hwver}\" +displayName = \"${displayname}\" +guestOS = \"${vmostype}\" + +# CPU/MEM +numvcpus = \"${numvcpus}\" +memsize = \"${mem}\" +MemAllowAutoScaleDown = \"FALSE\" +MemTrimRate = \"-1\" + +# ide-disks +ide0:0.present = \"${ide}\" +ide0:0.fileName = \"${diskfile}\" +ide0:0.mode = \"independent-nonpersistent\" +ide1:0.present = \"${cdrom0}\" +ide1:0.autodetect = \"TRUE\" +ide1:0.fileName = \"auto detect\" +ide1:0.deviceType = \"cdrom-raw\" +ide1:1.present = \"${cdrom1}\" +ide1:1.autodetect = \"TRUE\" +ide1:1.fileName = \"auto detect\" +ide1:1.deviceType = \"cdrom-raw\" + +# scsi-disks +scsi0.present = \"${scsi}\" +scsi0:0.present = \"${scsi}\" +scsi0:0.fileName = \"${diskfile}\" +scsi0.virtualDev = \"${hddrv}\" +scsi0:0.mode = \"independent-nonpersistent\" + +# floppies +floppy0.present = \"${floppy0}\" +floppy0.startConnected = \"FALSE\" +floppy0.autodetect = \"TRUE\" +floppy0.fileName = \"auto detect\" +# we need floppy b: for our windows client configuration +floppy1.present = \"${floppy1}\" +floppy1.startConnected = \"TRUE\" +floppy1.fileType = \"file\" +floppy1.fileName = \"${floppy1name}\" + +# nics +ethernet0.present = \"TRUE\" +ethernet0.addressType = \"static\" +${network_virtualDev} +ethernet0.connectionType = \"${network_kind}\" +#ethernet1.connectionType = \"custom\" +#ethernet1.vnet = \"/dev/vmnet2\" +ethernet0.address = \"00:50:56:${VM_ID}:${machostpart}\" +ethernet0.wakeOnPcktRcv = \"FALSE\" + +# sound +sound.present = \"TRUE\" +sound.fileName = \"-1\" +sound.autodetect = \"TRUE\" +sound.virtualdev = \"${sound}\" + +# svga +svga.autodetect = \"${svga_autodetect}\" + +# usb +usb.present = \"TRUE\" +usb.generic.autoconnect = \"TRUE\" + +# pci configuration +usb.pciSlotNumber = "16" +ethernet0.pciSlotNumber = "17" +sound.pciSlotNumber = "18" +ehci.pciSlotNumber = "19" +scsi0.pciSlotNumber = "20" + +# shared folders +sharedFolder0.present = \"${shfolders}\" +sharedFolder0.enabled = \"${shfolders}\" +sharedFolder0.expiration = \"never\" +sharedFolder0.guestName = \"${sharename}\" +sharedFolder0.hostPath = \"${sharepath}\" +sharedFolder0.readAccess = \"TRUE\" +sharedFolder0.writeAccess = \"TRUE\" +sharedFolder.maxNum = \"1\" + +# dirs/configs +tmpDirectory = \"${redodir}\" +redoLogDir = \"${redodir}\" +mainMem.useNamedFile = \"TRUE\" +snapshot.disabled = \"TRUE\" +tools.syncTime = \"TRUE\" +isolation.tools.hgfs.disable = \"FALSE\" +hgfs.mapRootShare = \"TRUE\" +isolation.tools.dnd.disable = \"FALSE\" +isolation.tools.copy.enable = \"TRUE\" +isolation.tools.paste.enabled = \"TRUE\" + +# serial port +serial0.present = \"${serial}\" +${serialdev} + +# parallel port +parallel0.present = \"${parallel}\" +parallel0.bidirectional = \"${paralbidi}\" +${paraldev}" >>${conffile} + +# set the appropriate permissions for the vmware config file +chmod u+rwx ${conffile} >/dev/null 2>&1 +} + +preferencesheader () +{ +echo ".encoding = \"UTF-8\" +# This configuration file was generated by $0 + +# updates/tips +webUpdate.enabled = \"FALSE\" +pref.downloadPermission = \"deny\" +pref.vmplayer.downloadPermission = \"deny\" +pref.vmplayer.webUpdateOnStartup = \"FALSE\" +pref.tip.startup = \"FALSE\" +hints.hideAll = \"TRUE\" +hint.vmui.showAllUSBDevs = \"FALSE\" + +# configs +prefvmx.defaultVMPath = \"${vmhome}\" +prefvmx.mru.config = \"${conffile}:\" + +# hot keys +pref.hotkey.control = \"true\" +pref.hotkey.alt = \"true\" +pref.hotkey.shift = \"true\" +pref.hotkey.gui = \"true\" +gui.restricted = \"true\" + +# fullscreen/mouse/keyboard +pref.fullscreen.toolbarPixels = \"0\" +pref.vmplayer.fullscreen.autohide = \"TRUE\" +pref.grabOnMouseClick = \"TRUE\" +pref.grabOnKeyPress = \"FALSE\" +pref.motionGrab = \"TRUE\" +pref.motionUngrab = \"TRUE\" +pref.hideCursorOnUngrab = \"TRUE\" +pref.autoFit = \"TRUE\" +pref.autoFitFullScreen = \"fitGuestToHost\" +pref.vmplayer.exit.vmAction = \"poweroff\" +pref.vmplayer.confirmOnExit = \"TRUE\" + +# shared folders +pref.enableAllSharedFolders = \"TRUE\" + +# eula" >${vmhome}/preferences + +# different eula parameters from Workstation 9+/ Player 5+ +case "$vmversion" in + 3.*|4.*|7.*|8.*) + echo " +pref.eula.size = \"2\" +pref.eula.0.appName = \"VMware Player\" +pref.eula.0.buildNumber = \"${vmbuild}\" +pref.eula.1.appName = \"VMware Workstation\" +pref.eula.1.buildNumber = \"${vmbuild}\"" >>${vmhome}/preferences + ;; + 5.*|9.*) + # code + echo " +pref.eula.count = \"2\" +pref.eula0.product = \"VMware Player\" +pref.eula0.build = \"${vmbuild}\" +pref.eula1.product = \"VMware Workstation\" +pref.eula1.build = \"${vmbuild}\"" >>${vmhome}/preferences + ;; +esac + +} + + +# declaration of default variables +################################################################################ + +# VM-ID static (0D), remove if changed to 00 +VM_ID="0D" +# should be dynamic +if [ "x$(which bc)" != "x" ]; then + VM_ID=$(echo "obase=16; $$" | bc) + VM_ID=$(expr substr $VM_ID $(expr ${#VM_ID} - 1) 2) +fi +# temporary disk space for logs, etc... +redodir=/tmp/vmware/${USER}.$$ +# dir for configs and vmem file +confdir=/tmp/vmware/${USER}.$$ +# configfile +conffile="${confdir}/run-vmware.conf" +# diskfile +diskfile=${vmpath} +# users vmware config folder +vmhome="${HOME}/.vmware" + +# get several version infos for vmware/player +. /etc/openslx/vmware/vmware.conf +vmbuild=$buildversion +vmversion=$version + +# VMware start options +# "-X": start in fullscreen +vmopt="-X" + + +# hardware checks +################################################################################ + +# use different network card (default e1000, vlance, vmxnet) +if [ -n "${network_card}" ]; then + network_virtualDev="ethernet0.virtualDev = \"${network_card}\"" +else + network_virtualDev='# using default virtualDev for ethernet0' +fi + +# set standard sound card, overwrite depending on OS (options sb16, es1371, hdaudio) +sound="es1371" + +# check for 3D configuration setting +case "${enable3d}" in + *true*|*yes*) + enable3d="TRUE" + ;; + *) + enable3d="FALSE" + ;; +esac + +# serial/parallel port defined (e.g. "ttyS0, lp0" or "autodetect") +case "$serial" in + tty*) + serialdev="serial0.filename = \"/dev/${serial}\"" + serial="TRUE" + ;; + auto*) + serialdev="serial0.autodetect = \"TRUE\"" + serial="TRUE" + ;; + *) + serialdev="# no serial port configured" + serial="FALSE" + ;; +esac +case "$parallel" in + lp*|parport*) + paraldev="parallel0.filename = \"/dev/${parallel}\"" + paralbidi="TRUE" + parallel="TRUE" + ;; + auto*) + paraldev="parallel0.autodetect = \"TRUE\"" + paralbidi="TRUE" + parallel="TRUE" + ;; + *) + paraldev="# no parallel port configured" + paralbidi="FALSE" + parallel="FALSE" + ;; +esac + +# adjust memory available for vmware guests +#if [ -n "${forcemem}" ]; then +# mem="${forcemem}" +#else +# case "$vmversion" in +# 2.*|6.*) +# permem=30 +# ;; +# 3.*|7.*) +# permem=25 +# ;; +# esac +# if [ "${totalmem}" -ge "2500" ]; then +# permem=40 +# fi +# # check if /tmp is on harddisk +# if grep -qe "/dev/.* /tmp " /proc/mounts ; then +# permem=60 +# id44="1" +# # Hack, if more than 2,5G RAM use 40% of Ram and write vmem into Ram as well +# # (40% vmware | 40% confdir(vmem...) | 20% host +# # VMplayer 2+ issue +# if [ "${totalmem}" -ge "2500" ]; then +# permem=40 +# confdir=/dev/shm/vmware/$USER +# conffile=${confdir}/run-vmware.conf +# mkdir -p /dev/shm/vmware/$USER +# fi +# fi +# mem=$(expr ${totalmem} / 100 \* ${permem} / 4 \* 4) +# if [ "${id44}" = "1" ]; then +# hostmem=$(expr ${totalmem} - ${mem}) +# else +# hostmem=$(expr ${totalmem} - ${mem} - ${mem}) +# fi +#fi + +# check if ide/scsi and hwver of image +# read only the first 30 lines to be shure +imghead=$(head -30 ${diskfile}) +hddrv=$(echo "${imghead}" | grep -m1 -ia "ddb.adapterType" |\ + awk -F '"' '{print $2}') +hwver=$(echo "${imghead}" | grep -m1 -ia "ddb.virtualHWVersion" |\ + awk -F '"' '{print $2}') +case "${hddrv}" in + ide) + ide="TRUE" + scsi="FALSE" + ;; + lsilogic|buslogic) + ide="FALSE" + scsi="TRUE" + ;; +esac + +# write configuration files +################################################################################ + +# create vmware directories +mkdir -p ${redodir} >/dev/null 2>&1 +mkdir -p ${confdir} >/dev/null 2>&1 +mkdir -p ${vmhome}/dndlogs >/dev/null 2>&1 +touch ${vmhome}/dndlogs/dndlog.conf >/dev/null 2>&1 + +# create preferences +preferencesheader + +# create VMware startup file +runvmwareconfheader +# link to conffile if confdir != redodir +ln -s ${conffile} ${redodir}/run-vmware.conf >/dev/null 2>&1 + +# sync is needed to ensure that data is really written to virtual disk +sync + +# own nvram. We need it for floppy drive b, default nvram has just drive a +# TODO: optimize, currently kinda inefficient, too much copys, but we +# don't know which one is installed... +cp /etc/openslx/vmware/nvram ${confdir}/nvram 2>/dev/null + + +# logging and stdout +################################################################################ + +# log script information +writelog "# File created by $0 (VMversion ${vmversion})\n# on $(date)\n" +writelog "Starting with non-persistent mode ...\n" + +# write all results to logfile +# log disksetup +writelog "Directories:" +writelog "\tConfdir:\t${confdir}" +writelog "\tConffile:\t${conffile}" +writelog "\tRedodir:\t${redodir}" +writelog "\tVMhome:\t\t${vmhome}" +writelog "\t/tmp info: \ + $(grep "/tmp " /proc/mounts) $(df -h | grep " /tmp$" | awk '{print $2}')" +# hw setup +writelog "Hardware:" +writelog "\tMAC:\t\t00:50:56:${VM_ID}:${machostpart}" +if [ -n "${network_card}" ]; then + writelog "\tNet Adaptor:\t${network_card}" +fi +writelog "\tMem:\t\t${mem} MB" +# echo nur wenn hostmem gesetzt +[ -n "${hostmem}" ] && writelog "\tHostmem:\t${hostmem} MB" +writelog "\tMax. res.:\t${xres}x${yres}" +writelog "\tCD-ROM1:\t${cdrom0}" +writelog "\tCD-ROM2:\t${cdrom1}" +writelog "\tFloppy_A:\t${floppy0}" +if [ "${serial}" = "TRUE" ]; then + writelog "\tSerial Port:\t${serialdev}" +fi +if [ "${parallel}" = "TRUE" ]; then + writelog "\tParallel Port:\t${paraldev}" +fi +# image +writelog "Diskimage:" +writelog "\tDiskfile:\t${diskfile}" +writelog "\tDisktype:\t${hddrv}" +writelog "\tHWVersion:\t${hwver}" +writelog "\tVMostype:\t${vmostype}" +# misc +writelog "Misc:" +writelog "\tDisplayname:\t${displayname}" +if [ "${cap3d}" = "TRUE" -a "${enable3d}" = "TRUE" ]; then + writelog "\t3D Graphics:\tenabled" +fi +# empty line at end +writelog "" + + +# finally set env for run-virt.sh +################################################################################ + +# configure and start samba service to provide user's home directory +if [ -f /usr/sbin/smbd ] ; then + sudo /opt/openslx/bin/sed -i /etc/vmware/smb.conf -e "s,USER,$USER," + sudo /usr/sbin/nmbd -s /etc/vmware/smb.conf + sudo /usr/sbin/smbd -s /etc/vmware/smb.conf +fi + +# using the modified version of the wrapper script +VIRTCMD="/opt/openslx/bin/vmplayer" +VIRTCMDOPTS="${vmopt} ${conffile}" +RMDIRS="${redodir} ${conffile}" diff --git a/remote/modules/vmplayer/data/etc/openslx/vmware/vmware-env b/remote/modules/vmplayer/data/etc/openslx/vmware/vmware-env new file mode 100755 index 00000000..f4901070 --- /dev/null +++ b/remote/modules/vmplayer/data/etc/openslx/vmware/vmware-env @@ -0,0 +1,125 @@ +#!/bin/sh +# Copyright (c) 2009 - OpenSLX GmbH +# +# This program is free software distributed under the GPL version 2. +# See http://openslx.org/COPYING +# +# If you have any feedback please consult http://openslx.org/feedback and +# send your suggestions, praise, or complaints to feedback@openslx.org +# +# General information about OpenSLX can be found at http://openslx.org/ +# ----------------------------------------------------------------------------- +# §filename§ +# - §desc§ +# §generated§ +# ----------------------------------------------------------------------------- + +#functions: helper functions +tempdir () { +# Create a special tempfs directory +mkdir -m 1777 -p /tmp/vmware +# Don't mount special tempfs, when using local harddrive for /tmp +[ ! -n "$(cat /proc/mounts |grep ' /tmp '|grep '/dev/sd')" ] \ + && mount -t tmpfs -o size=180%,mode=1777 tmpfs /tmp/vmware +} + +load_modules () { +# VMplayer common stuff +insmod /lib/modules/vmware/vmmon.ko || return 1 +insmod /lib/modules/vmware/vmnet.ko || return 1 +# VMplayer 3.X specific stuff +insmod /lib/modules/vmware/vmci.ko +insmod /lib/modules/vmware/vmblock.ko +insmod /lib/modules/vmware/vsock.ko + +} + +unload_modules () { +rmmod vmnet vmmonvsock vmci vmblock 2>/dev/null +} + +vmnetif () { +# let point the path directly to the directory where the binary lives +location="/usr/bin" +if [ -n "$vmnet0" ] ; then + # the path might be directly point to the plugin dir + $location/vmnet-bridge -d /var/run/vmnet-bridge-0.pid -n 0 +fi +if [ -n "$vmnet1" ] ; then + $location/vmnet-netifup -d /var/run/vmnet-netifup-vmnet1.pid \ + /dev/vmnet1 vmnet1 + ip addr add $vmnet1 dev vmnet1 + ip link set vmnet1 up + if [ -n "$vmnet1nat" ] ; then + echo "1" >/proc/sys/net/ipv4/conf/vmnet1/forwarding 2>/dev/null + echo "1" >/proc/sys/net/ipv4/conf/br0/forwarding 2>/dev/null + fi + /opt/openslx/rootfs/usr/sbin/udhcpd \ + -S /etc/vmware/udhcpd/udhcpd-vmnet1.conf +fi +if [ -n "$vmnet8" ] ; then + $location/vmnet-netifup -d /var/run/vmnet-netifup-vmnet8.pid \ + /dev/vmnet8 vmnet8 + ip addr add $vmnet8 dev vmnet8 + ip link set vmnet8 up + echo "1" >/proc/sys/net/ipv4/conf/vmnet8/forwarding 2>/dev/null + echo "1" >/proc/sys/net/ipv4/conf/br0/forwarding 2>/dev/null +# TODO: iptables in stage32? +# iptables -t nat -A POSTROUTING -o br0 -j MASQUERADE + # /etc/vmware/vmnet-natd-8.mac simply contains a mac like 00:50:56:F1:30:50 + $location/vmnet-natd -d /var/run/vmnet-natd-8.pid \ + -m /etc/vmware/vmnet-natd-8.mac -c /etc/vmware/nat.conf 2>/dev/null # or logfile + /opt/openslx/usr/sbin/udhcpd \ + -S /etc/vmware/udhcpd/udhcpd-vmnet8.conf +fi + +} + +vmblock () { +# let point the path directly to the directory where the binary lives + /usr/bin/vmware-usbarbitrator + +} + + +case "$1" in + start) + #start: defines start function for initscript + # load the configuration file + . /etc/openslx/vmware/vmware.conf + # hack to access the first serial/parallel port + chmod a+rw /dev/ttyS0 + chmod a+rw /dev/parport0 + tempdir + load_modules + vmnetif + vmblock + + ;; + stop) + #stop: defines stop function for initscript + killall vmnet-netifup vmnet-natd vmnet-bridge vmware vmplayer \ + vmware-tray vmnet-dhcpd 2>/dev/null + # might take a while until all services are shut down + sleep 1 + umount -l /tmp/vmware 2>/dev/null + unload_modules + + ;; + restart) + #restart: defines restart function for initscript + $0 stop && $0 start + ;; + status) + #status: defines status function for initscript + vmstatus + ;; + *) + #usage: defines usage function for initscript + ## print out usage + echo "Usage: $0 {start, stop, restart, status}" >&2 + exit 1 + ;; +esac + +exit 0 diff --git a/remote/modules/vmplayer/data/etc/openslx/vmware/vmware.conf b/remote/modules/vmplayer/data/etc/openslx/vmware/vmware.conf new file mode 100644 index 00000000..a67adc18 --- /dev/null +++ b/remote/modules/vmplayer/data/etc/openslx/vmware/vmware.conf @@ -0,0 +1,8 @@ +# configuration file for vmware background services written in stage3 setup +vmnet0=true +vmnet1=192.168.101.1/24 +vmnet1nat=true +vmnet8=192.168.102.1/24 +# stage1 variables produced during plugin install +version="5.0" +buildversion="1031769" diff --git a/remote/modules/vmplayer/data/etc/systemd/system/vmware.service b/remote/modules/vmplayer/data/etc/systemd/system/vmware.service new file mode 100644 index 00000000..067b15a0 --- /dev/null +++ b/remote/modules/vmplayer/data/etc/systemd/system/vmware.service @@ -0,0 +1,8 @@ +[Unit] +Description=Sets up the vmware environment +Wants=graphical.target + +[Service] +Type=simple +ExecStart=/etc/openslx/vmware/vmware-env start +ExecStop=/etc/openslx/vmware/vmware-env stop diff --git a/remote/modules/vmplayer/data/opt/openslx/bin/vmplayer b/remote/modules/vmplayer/data/opt/openslx/bin/vmplayer new file mode 100755 index 00000000..2b6e8f31 --- /dev/null +++ b/remote/modules/vmplayer/data/opt/openslx/bin/vmplayer @@ -0,0 +1,21 @@ +#!/bin/sh + +for mod in /lib/modules/vmware/*.ko; do + insmod "$mod" && continue + xmessage "Could not load kernel module $mod. vmplayer might fail." +done + +export LIBCONF_DIR=/usr/lib/vmware/libconf + +#/usr/lib/vmware/bin/vmplayer $@ + +# radically simplified version of the original script vmplayer by VMware Inc. +PREFIX=/usr/lib/vmware # depends on the vmware location +exec "$PREFIX"'/lib/wrapper-gtk24.sh' \ + "$PREFIX"'/lib' \ + "$PREFIX"'/bin/vmplayer' \ + "$PREFIX"'/libconf' "$@" + + + + diff --git a/remote/modules/vmplayer/data/opt/openslx/bin/vmware b/remote/modules/vmplayer/data/opt/openslx/bin/vmware new file mode 100755 index 00000000..1fe9b11d --- /dev/null +++ b/remote/modules/vmplayer/data/opt/openslx/bin/vmware @@ -0,0 +1,11 @@ +#!/bin/sh +# radically simplified version of the original script vmplayer by VMware Inc. +PREFIX=/usr/lib/vmware # depends on the vmware location +exec "$PREFIX"'/lib/wrapper-gtk24.sh' \ + "$PREFIX"'/lib' \ + "$PREFIX"'/bin/vmware' \ + "$PREFIX"'/libconf' "$@" + + + + |