|
|
# Copyright (c) 2003..2006 - RZ Uni Freiburg
# Copyright (c) 2006..2008 - OpenSLX GmbH
#
# This program/file is free software distributed under the GPL version 2.
# See http://openslx.org/COPYING
#
# If you have any feedback please consult http://openslx.org/feedback and
# send your feedback to feedback@openslx.org
#
# General information about OpenSLX can be found under http://openslx.org
#
# Configuration script for general Ubuntu to configure OpenSLX linux
# stateless clients (executed within initial ramdisk after genconfig)
# distro specific configuration variables used in the setup functions
# (formerly done via config-*, these variables are disputable ...)
# D_ETCEXCL - list of files, wildcards to be excluded from /etc when using
# bind mounts
# D_DIRINBINDMNT - lists of directories to be created in bind mounted rw part
# of the client filesystem
# D_RODIRSINRW - ReadOnly Directories in RW part of filesystem to save on
# TempFS usage
# D_DIRINDXS - directories in client filesystem which should be present anyhow
D_ETCEXCL="etc/gconf/*\n*.old\n*-\netc/autoinstall\nlogrotate*\nbootloader\n\
*~\npptp.d\nisdn\nyouservers\nhardware/hwcfg*\n\
X11/xdm/pixmaps\ndhclient.script"
D_BINDMPTS="tmp root home media"
D_DIRINBINDMNT="/var/run /var/log /var/tmp /var/lib/gdm"
D_RODIRSINRW="/etc/X11/xkb /var/lib/gconf /var/lib/dpkg /var/lib/aspell \
/var/lib/pango /var/lib/defoma /var/cache/fontconfig"
#D_RWDIRSINRO="/var/lib/gdm"
D_DIRINDXS="/var/X11R6/compose-cache \
/var/run/sysconfig/tmp /var/adm /var/lib/rpm /var/lib/nobody \
/var/lib/pam_devperm /var/lib/bluetooth \
/var/lib/texmf /var/lib/nfs/sm \
/var/lib/misc /var/lib/acpi /var/spool/cron \
/var/lock/subsys/sysconfig"
# empty functions are defined at the beginning of /etc/functions
# distro specific stuff to initialize
preinit () {
# load unix module to provide sockets (is compiled into kernel on
# the live CDs!?)
modprobe ${MODPRV} unix 2>/dev/null || error "$df_errumod" nonfatal
modprobe ${MODPRV} vesafb 2>/dev/null || error "$df_errumod" nonfatal
modprobe ${MODPRV} fbcon 2>/dev/null || error "$df_errumod" nonfatal
}
# distro specific function called from servconfig script
config_distro () {
# clean the runlevel directories which will be populated by the stage3 setup
for dir in rc0.d rc1.d rc2.d rc3.d rc4.d rc5.d rc6.d rcS.d ; do
rm -rf /mnt/etc/${dir}/*
done
# add the halt link to the 0 and 6 runlevel directories
ln -sf ../init.d/halt /mnt/etc/rc0.d/S90halt
ln -sf ../init.d/reboot /mnt/etc/rc6.d/S90reboot
# remove annoying udev rule set for changing eth interface
rm /mnt/etc/udev/rules.d/*persistent-net.rules >/dev/null 2>&1
# inittab is obsolete with the change to upstart in ubuntu 7.10, but to
# prevent missunderstandings with the blank inittab created by openslx init
# we'll write a comment..
echo "# inittab is obsolete with the change to upstart from ubuntu 7.10" \
> /mnt/etc/inittab
# fix getty bug
# (console login on tty1 is started too early)
sed -i "s/start on runlevel 2/start on stopped rc2/" /mnt/etc/event.d/tty1
}
# initial (boot time) runlevel scripts
initial_boot () {
local count=10
# boot.slx is a special runlevel script generated within initialramfs which
# should be executed before the normal runlevel scripts. Proper shutdown is
# not needed!?
for i in boot.slx mountkernfs.sh keyboard-setup mountdevsubfs.sh procps.sh \
bootlogd hwclock.sh sudo console-setup $D_SPLASHY; do
count=$(($count + 1))
[ $DEBUGLEVEL -ge 2 ] && echo "boot-runlevelscript $i"
ln -sf /etc/init.d/$i /mnt/etc/rcS.d/S${count}$i
done
}
# linking runlevel scripts
rllinker () {
local script="$1"
if [ $2 -lt 10 ] ; then
local start="0$2"; else local start="$2"
fi
if [ $3 -lt 10 ] ; then
local stop="0$3"; else local stop="$3"
fi
# empty runlevel links - decision on running certain services is
# passed via configuration
for i in rc2.d/K$stop$script rc3.d/K$stop$script \
rc2.d/S$start$script rc3.d/S$start$script ; do
if ! [ -f /mnt/etc/init.d/$script ]; then
echo "Target `pwd`../$script does not exist. Skipping links"
break
else
ln -sf ../init.d/$script /mnt/etc/$i
[ "$DEBUGLEVEL" == 5 ] && echo "Linked $script"
fi
done
}
# set up localization like keytable, console
dlocale () {
# fixme -- use keytable setup script here
# echo -e "\t# entries added by $0: $date" >> /mnt/etc/init.d/boot.slx
sed "s/LANG.*/LANG=\"${LANG}\"/" -i /mnt/etc/default/locale
#echo -e "\tsetfont ${CONSOLE_FONT} >${LOGFILE} 2>&1" \
# >>/mnt/etc/init.d/boot.slx
}
# group of functions for the normal runlevels - first parameter is start
# second stop
# function for ntp configuration
config_ntp () {
if [ -f /mnt/etc/init.d/ntp -a "x$start_ntp" != "xno" ] ; then
echo -e "ntp:x:74:65534:NTP daemon:/var/lib/ntp:/bin/false" \
>>/mnt/etc/passwd
testmkd /mnt/var/lib/ntp/var/run/ntp
rllinker "ntp" 7 14
fi
}
# function for atd
config_atd () {
if [ "x$start_atd" = "xyes" ]; then
# testmkd /mnt/var/spool/atjobs
# testmkd /mnt/var/spool/atspool
# chown 1:1 /mnt/var/spool/atjobs /mnt/var/spool/atspool
rllinker "atd" 14 4
fi
}
# function for configuration of cron services (fixme: to be moved to a plugin?)
config_cron () {
if [ "x$start_cron" = "xyes" ] ; then
if [ -f /mnt/etc/init.d/cron ] ; then
rllinker "cron" 18 2
# fixme! check for proper permissions!
testmkd /mnt/var/spool/crontabs
echo -e "# /etc/crontab - file generated by $0:\n\
#\t$date\nSHELL=/bin/sh\nPATH=/usr/bin:/usr/sbin:/sbin:/bin:/usr/lib/news/bin\
\nMAILTO=\n-*/15 * * * *\troot\ttest -x /usr/lib/cron/run-crons && \
/usr/lib/cron/run-crons >/dev/null 2>&1\n" >/mnt/etc/crontab
else
error "$df_errcron" nonfatal
fi
fi
}
# syslog service (available as a plugin, to be deleted here)
config_syslog () {
if [ "x$start_syslog" != "xno" ] ; then
# fixme, welcher Syslog wird verwendet?
#if syslog
testmkd /mnt/var/log/news
echo -e "# /etc/syslog.conf - file generated by $0" >/mnt/etc/syslog.conf
# test -n "$log_servers" && \
# for logserver in $log_servers; do
# echo -e "*.*;*.*;*.*;*kern.!*\t@$logserver" >>/mnt/etc/syslog.conf
# done
#else syslog-ng
# if [ -f /mnt/etc/init.d/syslog ] ; then
# # logoutput depending on $start_syslog definitions
# sysngwriter /mnt/etc/syslog-ng/syslog-ng.conf
rllinker "sysklogd" 2 18
#else keiner installiert
# error "$df_errsysl" nonfatal
fi
}
# secure shell service
config_sshd () {
if [ "x$start_sshd" = "xyes" ] ; then
if [ -f /mnt/etc/init.d/ssh ] ; then
#testmkd /mnt/var/run/sshd
rllinker "ssh" 12 10
else
error "$df_errsshd" nonfatal
fi
fi
}
# snmp agent for remote monitoring
config_snmp () {
if [ "x$start_snmp" = "xyes" ] ; then
if [ -f /mnt/etc/init.d/snmpd ] ; then
rllinker "snmpd" 24 2
testmkd /mnt/var/lib/net-snmp >/dev/null 2>&1
fi
# fixme!!
# write service monitor depending on services started
fi
}
# acpi and powersave
config_acpi () {
rllinker "acpid" 10 19
#Commented out since battery checking is only useful for Notebooks
#rllinker "acpi-support" 99 2
# nur hier weil udev_hotplug zu früh aufgerufen wird. -> Hm, warum zu
# früh an der anderen Stelle - was fehlt?? udev_hotplug gibts im Stage3
# nicht mehr!!
rllinker "udev" 11 25
}
# configure hal, dbus, policykitd and services like that
config_dreshal () {
if [ "x$start_dreshal" = "xyes" ]; then
testmkd /mnt/var/lib/dbus
rllinker "dbus" 17 20
testmkd /mnt/var/lib/PolicyKit root:polkituser 1770
testmkd /mnt/var/lib/PolicyKit-public root:polkituser
fi
}
# initialize boot.slx - skript to be executed during early system startup
# (before most of the normal boot init scripts)
# this script should operate like a normal runlevel script (fixme!!)
d_mkrlscript () {
local switch="$1"
local name="$2"
local info="$3"
case "$switch" in
init)
echo -e "#!/bin/sh\n# skeleton of /etc/init.d/$name written \
from $0\n# after you applied changes to the creation scripts you have to \
rerun\n# the mkdxsinitrd script to get them applied\n\n\
. /lib/lsb/init-functions\n" >/mnt/etc/init.d/$name
echo -e "\n\ncase \"\$1\" in\n start)\n\tlog_begin_msg \"$info\"" \
>>/mnt/etc/init.d/$name
chmod u+x /mnt/etc/init.d/$name
;;
close)
echo -e "\tlog_end_msg 0\n\t;;\n stop)\n\t;;\nesac\nexit 0" \
>>/mnt/etc/init.d/$name
;;
esac
}
# configure automounter
config_automount () {
if [ -f /mnt/etc/init.d/autofs ] ; then
testmkd /mnt/var/lock/subsys
sed -e "1i# /etc/${default}/autofs - file modified by\n#\t$0:\n#" \
-e "s,TIMEOUT.*,TIMEOUT=60," -i /mnt/etc/default/autofs
config_portmap
rllinker "autofs" 12 4
fi
}
# config nfsv4
config_nfsv4 () {
if [ "x$start_nfsv4" = "xyes" ]; then
testmkd /mnt/var/lib/nfs/rpc_pipefs
testmkd /mnt/var/lib/nfs/sm
sed -e "s,NEED_IDMAPD=.*,NEED_IDMAPD=\"yes\"," \
-e "s,NEED_GSSD=.*,NEED_GSSD=\"yes\"," \
-i /mnt/etc/${default}/nfs-common
echo -e "rpc_pipefs\t/var/lib/nfs/rpc_pipefs rpc_pipefs defaults\t 0 0\n\
nfsd\t\t/proc/fs/nfsd\tnfsd\t\tdefaults\t 0 0" >>/tmp/fstab
echo -e "\t# stuff needed for nfsv4\n\tmount -t rpc_pipefs rpc_pipefs \
/var/lib/nfs/rpc_pipefs\n\tmount -t nfsd nfsd /proc/fs/nfsd" \
>>/mnt/etc/init.d/boot.slx
# portmap is required for any NFS
config_portmap
rllinker "nfs-common" 10 8
fi
}
# start portmapper (needed at least for nfs and nis services)
config_portmap () {
rllinker "portmap" 2 20
}
# start NIS (fixmee - does the service is really named ypbind??)
config_nis () {
rllinker "ypbind" 6 16
}
|
