blob: e8d42e27c8ea87a277ebbd0f090abee9f9ef1d3d (
plain) (
tree)
|
|
#!/bin/ash
# Copyright (c) 2008 - OpenSLX GmbH
#
# This program is free software distributed under the GPL version 2.
# See http://openslx.org/COPYING
#
# If you have any feedback please consult http://openslx.org/feedback and
# send your feedback to feedback@openslx.org
#
# General information about OpenSLX can be found at http://openslx.org
#
# Main script for cd-boot demo initial ramfs - preloading environment for
# for running OpenSLX linux stateless clients version 4 for testing
fetchip () {
# we expect to get an ip address within 10++ seconds
( sleep 6 ; killall udhcpc >/dev/null 2>&1 ) &
for i in 1 2 ; do
udhcpc -f -n -q $vci -s /usr/share/udhcpc/default.script -i $nwif 2>/dev/null
if grep "ip=" /tmp/ipstuff >/dev/null 2>&1 ; then
. /tmp/ipstuff
for i in $dns ; do
echo "nameserver $i" >> /etc/resolv.conf
done
return
else
if [ $i -eq 1 ] ; then
sleep 1
else
echo "Did not get any proper IP configuration"; /bin/ash
fi
fi
done
}
#############################################################################
# device files get their own filesystem (to be move mounted later)
devdir="/dev"
mount -n -t tmpfs -o 'size=25%,mode=0755' initramfsdevs ${devdir}
NWMODULES="forcedeth e1000 e100 tg3 3c59x via-rhine r8169 pcnet32 b44 8139too"
DEBUGLEVEL=0
# create basic device files an directories in dev (for most hardware related
# devices mdev should handle that)
for i in "/dev/mem c 1 1" "/dev/null c 1 3" "/dev/zero c 1 5" \
"/dev/urandom c 1 9" "/dev/kmsg c 1 11" "/dev/tty0 c 4 0" \
"/dev/tty1 c 4 1" "/dev/tty2 c 4 2" "/dev/tty3 c 4 3" \
"/dev/tty4 c 4 4" "/dev/tty5 c 4 5" "/dev/tty6 c 4 6" \
"/dev/tty7 c 4 7" "/dev/tty8 c 4 8" "/dev/tty9 c 4 9" \
"/dev/tty10 c 4 10" "/dev/tty c 5 0" "/dev/console c 5 1" \
"/dev/ptmx c 5 2" "/dev/psaux c 10 1" "/dev/agpgart c 10 175" \
"/dev/fb0 c 29 0" "/dev/bootsplash p" "/dev/xconsole p"; do
mknod $i
done
mkdir -p ${devdir}/pts ${devdir}/shm ${devdir}/.udevdb ${devdir}/.udev
# source functions file common for all distros, messages contains all error
# and info output (for some reason the error output is not produced properly
# - crash)
# initramfs-setup configuration (common settings for all clients using a
# certain InitRamFS generated by slxmkramfs/mkdxsinitrd)
[ -f /etc/initramfs-setup ] && . /etc/initramfs-setup 2>/dev/null
export PATH=/bin:/sbin:/usr/bin/:/usr/sbin
# set a default LAN interface, might be modified for WLAN or on machines with
# more than one ethernet card built in
nwif="eth0"
# mount the important standard directories
[ ! -f /proc/cpuinfo ] && mount -n -t proc proc /proc
[ ! -d /sys/class ] && mount -n -t sysfs sysfs /sys
# keep quiet
#echo "0 0 0 0" >/proc/sys/kernel/printk
# fixme: shut down if script fails
trap "exec (sleep 30; echo o>/proc/sysrq-trigger)" \
SIGHUP SIGINT SIGPIPE SIGTERM
# if no kernel version is set, try to get it directly from /proc
if [ -z $KERNEL ] ; then
KERNEL=$(cat /proc/version)
KERNEL=${KERNEL#*version }
KERNEL=${KERNEL% (*) (*}
fi
# load network adaptor modules
for mod in ${NWMODULES}; do
modprobe ${MODPRV} $mod || echo "module $mod did not load for some reason"
usleep 10000
done
# read kernel commandline
read KCMDLINE < /proc/cmdline
# read the system wide machine-setup and then the kernel commandline
for opts in ${KCMDLINE} ; do
case ${opts} in
debug)
DEBUGLEVEL=1;;
# ... or a specified debug level (will be passed to next stage)
debug=*)
DEBUGLEVEL=${opts#debug=};;
nbd)
type=nbd
file=irfsnbd;;
nfs)
type=nfs
file=irfsnfs;;
dnbd2)
type=dnbd2
file=irfsd2;;
esac
done
# at this point a timer should be started to ensure an automated reboot
# or halt of the machine if SLX init does not succeed (e.g. missing kernel
# module for the network adaptor)
if [ "${DEBUGLEVEL}" -gt 0 ] ; then
cat<<EOF > /bin/watchdog
#!/bin/ash
echo \$$ > /tmp/watchdogpid
[ ! -f /proc/version ] && mount -n -t proc proc /proc
sleep 120 2> /dev/null
echo "o" > /proc/sysrq-trigger
EOF
chmod u+x /bin/watchdog
watchdog &
fi
if [ -n "${essid}" ] ; then
# WLAN setup will most probably change the network interface name stored in
# nwif (to wlan0 or something like that)
:
else
# check here for the active ethernet link
ip link show dev eth1 >/dev/null 2>&1 && echo "more than one nw if found"
fi
# set up loopback networking and power up ethernet
ip link set dev lo up
ip addr add 127.0.0.1/8 dev lo
ip link set dev $nwif up || echo "I did not find any usable network adaptor."
# start udhcpc, if no lease could be optained, start debug shell
mkdir -p /usr/share/udhcpc
echo -e "#!/bin/ash\nunset infomsg HOME IFS mask lease interface DEBUGLEVEL \
BOOT_IMAGE\nset >/tmp/ipstuff" >/usr/share/udhcpc/default.script
chmod u+x /usr/share/udhcpc/default.script
modprobe -q af_packet
[ -n $vci ] && vci="-V $vci"
fetchip
ip addr add $ip/$(ipcalc -s -p $ip $subnet|sed s/.*=//) dev $nwif
ip route add default via $router
# at this point a little selection script could be downloaded, which lets the
# user choose what kind of SLX client he wants to get
# get kernel and initramfs, if something fails start debug shell
echo "Fetching selected kernel and initial ramfs ($type) from the net ..."
( wget -q -c -O /tmp/kernel \
ftp://openslx:OpenS1X@archive.ruf.uni-freiburg.de/kernel 2>/dev/null && \
wget -q -c -O /tmp/iramfs \
ftp://openslx:OpenS1X@archive.ruf.uni-freiburg.de/$file 2>/dev/null ) || \
/bin/ash
# start a debug shell if needed, else set quiet kernel parameter
if [ "${DEBUGLEVEL}" -gt 0 ] ; then
/bin/ash
else
quiet=quiet
echo -e "\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n"
fi
# start the new kernel with initialramfs and cmdline
echo "Booting OpenSLX client ..."
kexec -l /tmp/kernel --initrd=/tmp/iramfs --append="ip=$ip:$siaddr:$router:$subnet\
file=ftp://132.230.4.4/default.tgz debug=${DEBUGLEVEL} $quiet"
kexec -e
|