#!/bin/sh
#
# Description: universal (distro independent) hardware autoconfiguration
# script for linux diskless clients, using hwconfig from
# knoppix as base tool
#
# Author(s): Dirk von Suchodoletz <dirk@goe.net>, 01-05-2006
# Felix Endres
#
# Copyright: (c) 2003 - 2006 - RZ Universitaet Freiburg
#
# Version: 0.3.2b
# local functions used within hwautocfg
displaysetup () {
local xfc=$1
# define some defaults
local HSYNCRANGE="31.5-63.5"
local VSYNCRANGE="60-90"
local DEFAULTMODES='"1024x768" "800x600" "640x480"'
local DEFAULTCOLORDPT=24
# set variables representing the xorg.conf sections (version 6.8.x)
local Module='\tLoad\t\t"dbe"\n
\tLoad\t\t"extmod"\n
\tLoad\t\t"type1"\n
\tLoad\t\t"speedo"\n
\tLoad\t\t"freetype"\n
\tLoad\t\t"v4l"'
local ServerFlags='\tOption\t\t"AllowMouseOpenFail"\n
\tOption\t\t"blank time"\t\t"5"\n
\tOption\t\t"standby time"\t\t"10"\n
\tOption\t\t"suspend time"\t\t"15"\n
\tOption\t\t"off time"\t\t"20"'
local Files='\tRgbPath\t\t"/usr/X11R6/lib/X11/rgb"\n
\tModulePath\t"/etc/X11/modules"\n
\tModulePath\t"/usr/X11R6/lib/modules"\n
\tFontPath\t"/usr/X11R6/lib/X11/fonts/misc/:unscaled"\n
\tFontPath\t"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"\n
\tFontPath\t"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"'
local InputDevice='\tIdentifier\t"Keyboard1"\n
\tDriver\t\t"keyboard"\n
\tOption\t\t"XkbRules"\t\t"xfree86"\n
\tOption\t\t"XkbLayout"\t\t"XKEYBOARD"\n
\tOption\t\t"XkbModel"\t\t"pc105"'
local InputMouseDef='\tIdentifier "Mouse1"\n
\tDriver\t\t"mouse"\n
\tOption\t\t"Protocol"\t\t"imps/2"\n
\tOption\t\t"Device"\t\t"/dev/input/mice"\n
\tOption\t\t"Emulate3Buttons"\n
\tOption\t\t"ZAxisMapping"\t\t"4 5"\n
\tOption\t\t"Buttons"\t\t"3"'
local InputMouseSyn='\tIdentifier "Mouse1"\n
\tDriver\t\t"synaptics"\n
\tOption\t\t"Protocol"\t\t"auto-dev"\n
\tOption\t\t"Device"\t\t"/dev/psaux"\n
\tOption\t\t"LeftEdge"\t\t"1700"\n
\tOption\t\t"RightEdge"\t\t"5300"\n
\tOption\t\t"TopEdge"\t\t"1700"\n
\tOption\t\t"BottomEdge"\t\t"4200"\n
\tOption\t\t"FingerLow"\t\t"25"\n
\tOption\t\t"FingerHigh"\t\t"30"\n
\tOption\t\t"MaxTapTime"\t\t"180"\n
\tOption\t\t"MaxTapMove"\t\t"220"\n
\tOption\t\t"VertScrollDelta"\t"100"\n
\tOption\t\t"MinSpeed"\t\t"0.06"\n
\tOption\t\t"MaxSpeed"\t\t"0.12"\n
\tOption\t\t"AccelFactor"\t\t"0.0010"'
local Monitor='\tIdentifier "Default"\n
\tModelName\t"MODEL"\n
\tOption\t\t"CalcAlgorithm"\t"CheckDesktopGeometry"\n
\tHorizSync\tHS\n
\tVertRefresh\tVS\n
\tOption\t"DPMS"\t\t"true"'
local Device='\tIdentifier\t"StdGraphics"\n
\tVendorName\t"XDESC"\n
\tDriver\t\t"XMODULE"'
local Screen='\tIdentifier\t"Screen 1"\n
\tDevice\t\t"StdGraphics"\n
\tMonitor\t\t"Default"\n
\tDefaultColorDepth CDP'
local ServerLayout='\tIdentifier\t"Simple Layout"\n
\tScreen\t\t"Screen 1"\n
\tInputDevice\t"Keyboard1"\t"CoreKeyboard"\n
\tInputDevice\t"Mouse1"\t"CorePointer"\n
\tOption\t\t"BlankTime"\t"5"\n
\tOption\t\t"StandbyTime"\t"10"\n
\tOption\t\t"SuspendTime"\t"20"\n
\tOption\t\t"OffTime"\t"30"'
local DRI='\tGroup\t\t"video"\n
\tMode\t\t0666'
if [ -n "$hw_graphic" ] ; then
DRV=${hw_graphic% *}
CDP=${hw_graphic##* }
msg="Please check your graphic adaptor settings ($hw_graphic)."
if [ -z "$DRV" ] ; then error " Manual configuration of your graphic \
hardware module to set failed.\n $msg" nonfatal
XMODULE=DRV
else
[ -z "${XMODULE}" ] && XMODULE=vesa
fi
fi
if [ -z "$CDP" ] ; then error " Manual configuration of your graphic \
systems color depth failed.\n $msg" nonfatal
CDP=${DEFAULTCOLORDPT}
fi
if [ -n "$hw_monitor" ] ; then
# just cut all starting from k(Hz) ...
HS=${hw_monitor%k*}
VS=${hw_monitor%Hz*}
[ "${hw_monitor}" == "$VS" ] && VS=${hw_monitor%hz*}
VS=${VS##* }
SCR_MODES="\"${hw_monitor##* }\""
else
# Gather information about the Monitor capabilities
screenres > /tmp/screenres
VERTSR=`cat /tmp/screenres | sed -n '/Vertical Frequency Range/s/[^0-9]* \([0-9-]*\)/\1/p'`
HORISR=`cat /tmp/screenres | sed -n '/Horizontal Frequency Range/s/[^0-9]* \([0-9-]*\)/\1/p'`
HS=$HORISR
VS=$VERTSR
# compute max resolution
SCR_MODES=`cat /tmp/screenres | sed -n '/Recommended Screen Modes:/s/[^"]*\(.*\)/\1/p'`
# # gather monitor information automatically
# ddcprobe > /tmp/ddcprobe
# hwmsg="Please check the output of ddcprobe. The settings where not \
#complete\n or non existant. The $0 script tried for a fully automatic\n\
# configuration of display"
fi
hwmsg="Please check your predefined monitor settings ($hw_monitor): Automatic\n\
configuration of display"
if [ -z "$HS" ] ; then error " $hwmsg timings was attempted, but the \
horizontal frequency could not be detected. Using default frequency \
range (${HSYNCRANGE})" nonfatal
HS=${HSYNCRANGE}
fi
if [ -z "$VS" ] ; then error " $hwmsg timings was attempted, but the \
vertical frequency could not be detected. Using default frequency \
range (${VSYNCRANGE})" nonfatal
VS=${VSYNCRANGE}
fi
if [ -z "$SCR_MODES" ] ; then error " $hwmsg resolution was attempted but not \
established. Using default resolutions (${DEFAULTMODES})" nonfatal
SCR_MODES=${DEFAULTMODES}
fi
monmanual=yes
# finally write config file
echo -e "#\n# autogenerated X hardware configuration by $0\n# \
Dirk von Suchodoletz <dirk@goe.net>, $date" >$xfc
echo -e "# DO NOT EDIT THIS FILE BUT '$0' INSTEAD!\n#" \
>>$xfc
for section in Files ServerFlags Module InputDevice Monitor \
Screen Device ServerLayout DRI ; do
echo "Section \"$section\"" >>$xfc
case "$section" in
Files)
echo -e ${Files} >>$xfc
# check for 64bit CPU/installation (fixme!!)
[ -n "$amd64" ] && \
echo '"\tModulePath\t"/usr/X11R6/lib64/modules"\n' >>$xfc
for i in ${D_XFONTPATH} ; do
echo -e "\tFontPath\t\"$i/\"" >>$xfc ; done
;;
ServerFlags)
echo -e ${ServerFlags} >>$xfc
;;
Device)
echo -e ${Device} | \
sed -e "s,XMODULE,${XMODULE}," -e "s%XDESC%${XDESC}%" >>$xfc
# special options may be needed for some drivers
[ $DEBUGLEVEL -gt 1 ] && msg "X setup" \
"adding for some Xfree86 modules (radeon, s3virge, nvidia) special\noptions \
to the 'Device' section. Consult hwsetup if you like to add more or\nremove some."
[ x$DRV = "xs3virge" ] && {
echo -e "\tOption\t\t\"XVideo\" \"Off\"\n" >>$xfc
[ $DEBUGLEVEL -gt 1 ] && msg "X setup" \
"added special option for \
the s3virge module -> 'XVideo Off'. remove the\nappropriate line in hwsetup \
if you like not to use it." ; }
[ x$DRV = "xnvidia" ] && {
echo -e "\tOption\t\t\"NvAGP\" \"3\"" >>$xfc
echo -e "\tOption\t\t\"NoLogo\" \"1\"" >>$xfc
[ $DEBUGLEVEL -gt 1 ] && msg "X setup" \
"added special option for \
the nvidia module -> 'NvAGP '. it sets the use\nof internal or external \
agpgart support." ; }
[ "$busid" ] && {
echo -e "\tOption\t\t\"BusID\" \"$busid\"" >>$xfc
[ $DEBUGLEVEL -gt 1 ] && msg "X setup" \
"added special option for \
the 'BusID' information - it\ndefines the npostion of graphics adaptor in \
pci/agp bus needed for acceleration." ; }
;;
Module)
echo -e ${Module} >>$xfc
[ x$DRM = "xyes" ] && \
echo -e "\tLoad\t\t\"dri\"" >>$xfc
[ x$GLX != "xno" ] && \
echo -e "\tLoad\t\t\"glx\"" >>$xfc
;;
Monitor)
echo -e ${Monitor} | \
sed -e "s,HS,${HS},g" -e "s,VS,${VS},g" >>$xfc
;;
InputDevice)
echo -e ${InputDevice} | sed -e "s,XKEYBOARD,${XKEYBOARD},g" \
>>$xfc
[ "${XKEYBOARD}" = "de" ] && \
echo -e '\tOption\t\t"XkbVariant"\t\t"nodeadkeys"' >>$xfc
echo -e "EndSection\n\nSection \"$section\"" >>$xfc
# if special synaptics touchpad was detected and specific driver
# is present
if strinfile "synaptics" /tmp/hwsetup.info && \
test -e /mnt/usr/X11R6/lib/modules/input/synaptics_drv.o ; then
echo -e $InputMouseSyn >>$xfc
else
echo -e $InputMouseDef >>$xfc
fi
;;
Screen)
echo -e ${Screen} | sed -e "s,CDP,${CDP}," >>$xfc
for BPP in 15 16 24 32
do echo -e '\tSubSection "Display"\n\t\tDepth\t'\
$BPP'\n\t\tModes\t'$SCR_MODES'\n\tEndSubSection' >>$xfc
[ $BPP = "$CDP" ] && break
done
;;
ServerLayout)
echo -e ${ServerLayout} >>$xfc
;;
esac
echo -e "EndSection\n" >>$xfc
done
}
#######################################################################
# script starts here
# functions common for all distros
. /etc/functions
# functions common for all distros, messages contains all error and
# info output (fixme!! put messages output into that file)
. /etc/messages
# load distro specific configuration variables and functions. distro
# specific functions may overwrite functions defined in /etc/functions
. /etc/sysconfig/config
. /etc/distro-functions
# heavy debugging output in level 3 and above ...
[ $DEBUGLEVEL -gt 3 ] && set -x
# set X11 configuration file
if [ -n "${D_XF86CONFFILE}" ] ; then
D_XF86CONFFILE="/mnt/${D_XF86CONFFILE}"
else
D_XF86CONFFILE="/mnt/etc/X11/xorg.conf"
error "$hcfg_xcfg" nonfatal
fi
# USB core is needed for presence of /proc/bus/usb
modprobe ${MODPRV} usbcore &
# "drivers" (pseudo, placeholder strings, ...) to exclude from loading
# depending on distro more hw modules have to be excluded too. use the
# D_HWMODTOIGNORE for that purpose
DRIVERLIST=" disabled unknown ignore pcspkr synaptics keybdev kanotix\
${D_HWMODTOIGNORE} "
# driver blacklist (real modules which fail to load)
DRIVERLIST=${DRIVERLIST}"hw_random genericwheelusb "
# hack for pseudo modules (not to load) hopefully "usbcore" is present
# as a module, might be exchanged with any other existing ...
for i in $DRIVERLIST ; do
echo -e "alias\t$i\tusbcore" >> /etc/modprobe.conf
done
# load kernel module for ps2 mice
[ -f /lib/modules/${KERNEL}/kernel/drivers/input/mouse/psmouse.ko ] && \
modprobe ${MODPRV} psmouse
# and map the mousehandler to /dev/input/mice
[ -f /lib/modules/${KERNEL}/kernel/drivers/input/mousedev.ko ] && \
modprobe ${MODPRV} mousedev
# start the knoppix hardware autodetection tool
( hwsetup -v > /tmp/hwsetup.info && echo "hwsetup" > /tmp/hwrun1 ) &
# ACPI configuration - at least not needed with SuSE 9.3/10.0
# needed for other distros?
# AGP configuration (agpgart and chipset specific driver)
modprobe ${MODPRV} agpgart || \
modprobe ${MODPRV} agpgart agp_try_unsupported=1
# wait for /tmp/hwsetup.info to appear
waitfor /tmp/hwrun1 50000 || \
error " Expected information from hwsetup to appear in \
/tmp/hwsetup.info.\n Unable to configure parts of the systems hardware. \
Please check that\n hwsetup is properly installed and executable."
# load ide drivers first, takes a while to initialize
for DRIVER in cmd64x hpt366 piix slc90e66 cs5520 it821x rz1000 \
triflex aec62xx cs5530 ns87415 sc1200 trm290 alim15x3 \
cy82c693 opti621 serverworks via82cxxx amd74xx pdc202xx_new \
siimage atiixp hpt34x pdc202xx_old sis5513; do
strinfile " ${DRIVER}" /tmp/hwsetup.info && {
IDE="yes"
modprobe ${MODPRV} ${DRIVER} &
DRIVERLIST="${DRIVERLIST} ${DRIVER}"; }
done
# check for IDE/SCSI (SATA)
for DRIVER in ata_piix sata_via sata_nv sata_sil sata_sis sata_svw \
sata_sx4 sata_uli sata_vsc sata_qstor sata_promise sata_mv; do
strinfile " ${DRIVER}" /tmp/hwsetup.info && {
#SCSIIDE="yes"
modprobe ${MODPRV} ${DRIVER} &
DRIVERLIST="${DRIVERLIST} ${DRIVER}"; }
done
# check for USB, pcmcia and ieee1394 hardware drivers
for DRIVER in ohci-hcd uhci-hcd ehci-hcd ohci1394; do
strinfile " ${DRIVER}" /tmp/hwsetup.info && {
USB="yes"
modprobe ${MODPRV} ${DRIVER}
DRIVERLIST="${DRIVERLIST} ${DRIVER}"; }
done
# load usbhid (for USB keyboard/mouse) or remove usbcore module if USB
# not present
if [ -n "$USB" ] ; then
modprobe ${MODPRV} usbhid &
else rmmod usbcore
fi
# remove unneeded network card modules
for DRIVER in ${NWMODULES}; do
strinfile " ${DRIVER}" /tmp/hwsetup.info || {
rmmod ${DRIVER} &
DRIVERLIST="${DRIVERLIST} ${DRIVER}"; }
done
# sound card setup (alsa and oss compatibility drivers)
if [ -f /etc/sysconfig/sound ] ; then
. /etc/sysconfig/sound
else DRIVER="snd-dummy"
fi
modprobe ${MODPRV} ${DRIVER}
DRIVERLIST="${DRIVERLIST} ${DRIVER} "
modprobe -a ${MODPRV} snd_pcm_oss snd_mixer_oss
# check for PCMCIA / cardbus stuff
for DRIVER in yenta_socket i82365 pd6729 tcic; do
strinfile ${DRIVER} /tmp/hwsetup.info && {
modprobe ${MODPRV} ${DRIVER}
DRIVERLIST="${DRIVERLIST} ${DRIVER}"
PCMCIA="yes"; }
done
if [ -n "${PCMCIA}" ] ; then
#echo "pcmcia=\"yes\"" > config
modprobe ${MODPRV} ds
fi
# remaining drivers listed in /tmp/hwsetup.info
cat /tmp/hwsetup.info| while read LINE ; do
if strinstr "driver:" "${LINE}"; then
DRIVER=${LINE##driver: }
if ! strinstr " ${DRIVER} " "${DRIVERLIST}"; then
strinstr "Card:" "${DRIVER}" || strinstr "ps/2" "${DRIVER}" || {
modprobe ${MODPRV} ${DRIVER} &
usleep 10; }
DRIVERLIST="${DRIVERLIST} ${DRIVER}"
fi
fi
done
# rerun the knoppix hardware autodetection tool for USB and ide devices
# like dvd or harddisk - wait a few seconds so hopefully the ide driver
# is initialized
test -f /proc/bus/usb/devices || mount -n -t usbfs usbfs /proc/bus/usb
[ -n "$IDE" ] && modprobe -q ide_generic 2>/dev/null
usleep 10 && hwsetup -v > /tmp/hwsetup.info
# check if USB mouse and/or keyboard is connected and remove usbhid if
# not
strinfile "genericwheelusb" /tmp/hwsetup.info || \
(strinfile "keybdev" /tmp/hwsetup.info || rmmod usbhid)
# load IDE high level drivers
if [ -n "$IDE" ] ; then
# you might want to check /etc/sysconfig/floppy for more info
strinfile "ZIP" /tmp/hwsetup.info && modprobe ${MODPRV} ide_floppy
strinfile "CDROM" /tmp/hwsetup.info && modprobe ${MODPRV} ide_cd
strinfile "HD" /tmp/hwsetup.info && modprobe ${MODPRV} ide_disk
fi
# not rather precise ...
if strinfile "SCSI" /tmp/hwsetup.info ; then
strinfile "CDROM" /tmp/hwsetup.info && modprobe -a ${MODPRV} sr_mod sg
strinfile "HD" /tmp/hwsetup.info && modprobe ${MODPRV} sd_mod
fi
# fixme - psmouse entladen, falls nicht vorhanden
# configure some variables from configuration file - wait for dhcp or ldap
# confiurator to complete
waitfor /tmp/dhcp-done 10000 || error " Did not get any configuration \
data via dhcp until now ..." nonfatal
waitfor /tmp/ldap-done 10000 || error " Did not get any configuration \
data via ldap until now ..." nonfatal
. /etc/machine-setup
# postpone some commands into normal bootup environment
echo -e "\t# entries added by $0: $date" >> /etc/boot.ld
# run localizator and configure keyboard and console fonts
DEFKEYTABLE="de-latin1-nodeadkeys"
localization $country
if [ -z "${KEYTABLE}" ] ; then
msg "Keyboard setup" "No settings found for keyboard, using default of \
'${DEFKEYTABLE}' defined\nin $0."
KEYTABLE=${DEFKEYTABLE}
fi
# keytable will be loaded during early init process
echo -e "\tloadkeys -q ${KEYTABLE}" >> /etc/boot.ld
# run X11 / Xorg configurator
. /etc/sysconfig/xserver >/dev/null 2>&1 || error "$hcfg_hwsetup" nonfatal
( displaysetup /etc/xorg.conf; echo "ready" > /tmp/xready ) &
# wait for completion of clients root filesystem in /mnt
waitfor /tmp/fscmpl 40000
# add entries to boot.ld
cat /etc/boot.ld >> /mnt/etc/${D_INITDIR}/boot.ld
[ -n "${CONSOLE_FONT}" ] && consolefont
# get idea of availabe harddisk partitions, put swap partitions into
# (/mnt)/etc/fstab and format and mount partitions of type 44 (unknown)
for hd in $(cat /tmp/hwsetup.info|sed -n -e '/HD$/,/device:/p'| \
sed -n -e '/device:/p' | sed -e 's/device: //') ; do
fdisk -l /dev/$hd| sed -n "/^\/dev\//p" > /tmp/hd_part
for hdpartnr in $(cat /tmp/hd_part | \
sed -n -e "/ 82 /p"|sed -e "s/[[:space:]].*//") ; do
echo -e "$hdpartnr\tswap\t\tswap\t\tdefaults\t 0 0" >> /mnt/etc/fstab
done
# we use special non assigned partition type for harddisk scratch space
for hdpartnr in $(cat /tmp/hd_part | \
sed -n -e "/ 44 /p"|sed -e "s/[[:space:]].*//") ; do
# ugly message from ext2 mount :-(
( mkfs.ext2 -q $hdpartnr; mount -n $hdpartnr /mnt/tmp; \
echo "$hdpartnr" > /tmp/tmpready ) &
echo -e "$hdpartnr\t/tmp\t\text2\t\tdefaults\t 0 0" >> /mnt/etc/fstab
part44=yes
break
done
# put detected linux partitions into /etc/fstab with "noauto"
for hdpartnr in $(cat /tmp/hd_part | \
sed -n -e "/ 83 /p"|sed -e "s/[[:space:]].*//") ; do
mkdir -p /mnt/media/${hdpartnr#/dev/*} 2>/dev/null
echo -e "$hdpartnr\t/media/${hdpartnr#/dev/*}\tauto\t\tnoauto,\
noexec\t 0 0" >> /mnt/etc/fstab
done
done
# determine if tmp preparation should wait for format/mount or not
[ -z "$part44" ] && echo "finished" > /tmp/tmpready
# finalize X configuration
# only if X is link itself (normally to /var/X11R6/bin/X) check!!
link=`ls -l /mnt/usr/X11R6/bin/X 2>/dev/null`
if strinstr "/var/X11R6" "$link" ; then
testmkd /mnt/var/X11R6/bin
for i in /usr/X11R6/bin/Xorg /usr/X11R6/bin/XFree86 ; do
[ -e "/mnt/$i" ] && { ln -sf $i /mnt/var/X11R6/bin/X; break; }
done
fi
# wait for completion of Xorg configuration
waitfor /tmp/xready 10000
cp /etc/xorg.conf ${D_XF86CONFFILE}
echo "finished" > /tmp/hwcfg