path: root/src/boot-env/pbs/rootfs/init

#!/bin/ash
# Copyright (c) 2008..2009 - OpenSLX GmbH
#
# This program is free software distributed under the GPL version 2.
# See http://openslx.org/COPYING
#
# If you have any feedback please consult http://openslx.org/feedback and
# send your feedback to feedback@openslx.org
#
# General information about OpenSLX can be found at http://openslx.org
#
# Main script for preboot initial ramfs - preloading environment for running
# OpenSLX linux stateless clients version 5.

fetchip () {
# we expect to get an ip address within 10++ seconds
( sleep 6 ; killall udhcpc >/dev/null 2>&1 ) &
for i in 1 2 ; do
  udhcpc -f -n -q $vci -s /usr/share/udhcpc/default.script -i $nwif 2>/dev/null
  if grep "ip=" /tmp/ipstuff >/dev/null 2>&1 ; then
    . /tmp/ipstuff
    for ns in $dns ; do
      echo "nameserver $ns" >>/etc/resolv.conf
    done
    # simply add a single dns server for passing via kernel cmdline to stage3
    # (quickhack, just the last, list of dns might be better ...)
    echo "dnssrv=$ns" >>/tmp/ipstuff
    return
  else
    if [ $i -eq 1 ] ; then
      sleep 1
    else
      dialog --msgbox "Did not get any proper IP configuration: Please check \
that your Ethernet card is supported, the machine is connected to the network \
and a DHCP server is answering your requests." 7 65
      ash
      echo "o" >/proc/sysrq-trigger
    fi
  fi
done
}

#############################################################################
# PreBoot init main part

# device files get their own filesystem
devdir="/dev"
mount -n -t tmpfs -o 'size=25%,mode=0755' mdev ${devdir}
mkdir -p /dev/pts
mount -t devpts devpts /dev/pts
echo /sbin/mdev > /proc/sys/kernel/hotplug
cat > /etc/mdev.conf << "EOF"
sda* 0:6 0660
sdb* 0:6 0660
sg* 0:6 0660
hda* 0:6 0660
hdb* 0:6 0660
EOF

mdev -s

export DEBUGLEVEL=0

# create basic device files an directories in dev
for i in "/dev/mem c 1 1" "/dev/null c 1 3" "/dev/zero c 1 5" \
         "/dev/urandom c 1 9" "/dev/kmsg c 1 11" "/dev/tty0 c 4 0" \
         "/dev/tty1 c 4 1" "/dev/tty2 c 4 2" "/dev/tty3 c 4 3" \
         "/dev/tty4 c 4 4" "/dev/tty5 c 4 5" "/dev/tty6 c 4 6" \
         "/dev/tty7 c 4 7" "/dev/tty8 c 4 8" "/dev/tty9 c 4 9" \
         "/dev/tty10 c 4 10" "/dev/tty c 5 0" "/dev/console c 5 1" \
         "/dev/ptmx c 5 2" "/dev/psaux c 10 1" "/dev/agpgart c 10 175" \
         "/dev/fb0 c 29 0" "/dev/bootsplash p" "/dev/xconsole p"; do
  mknod $i
done
mkdir -p ${devdir}/pts ${devdir}/shm
export PATH=/bin:/sbin:/usr/bin/:/usr/sbin

# redirect kernel messages to tty10 instead of tty1
getty -i -n -l /bin/cat 38400 tty10 &
setlogcons 10

# initramfs-setup configuration (common settings for all clients using a
# certain InitRamFS generated by slxmkramfs/mkdxsinitrd)
[ -f /etc/initramfs-setup ] && . /etc/initramfs-setup 2>/dev/null

# set a default LAN interface, has to be modified for WLAN or on machines
# with more than one ethernet card built in
nwif="eth0"

# mount the important standard directories
[ ! -f /proc/cpuinfo ] && mount -n -t proc proc /proc
[ ! -d /sys/class ] && mount -n -t sysfs sysfs /sys

# load framebuffer modules if needed
for mod in vesafb fbcon; do
  if [ x != x$(find /lib/modules -name ${mod}.ko) ]; then
    modprobe $mod || \
      dialog --infobox "Module $mod did not load for some reason." 3 65
    usleep 1000
  fi 
done

# give startup information
dialog --infobox "Starting OpenSLX preboot environment ..." 3 65

# load usb keyboard and network adaptor modules
for mod in ${ramfs_nicmods} af_packet unix hid hid-bright usbhid \
                            uhci-hcd ohci-hcd ; do
  if [ x != x$(find /lib/modules -name ${mod}.ko) ]; then
    modprobe $mod || \
      dialog --infobox "Module $mod did not load for some reason." 3 65
    usleep 10000
  fi 
done

# set the default for boot type and read kernel commandline (for this and
# other options)
export TYPE=fastboot
read KCMDLINE </proc/cmdline
# read the system wide machine-setup and then the kernel commandline
for opts in ${KCMDLINE} ; do
  case ${opts} in
    debug)
      DEBUGLEVEL=1;;
    # ... or a specified debug level (will be passed to next stage)
    debug=*)
      DEBUGLEVEL=${opts#debug=};;
    # WLAN ssid (most probably passed that way, unused yet ...)
    ssid=*)
      SSID=${opts#SSID=};;
    # Boot type (fastboot)/directkiosk/cfgkiosk/slxconfig
    type=*)
      TYPE=${opts#type=};;
    pbsId=*)
      PBS_ID=${opts#pbsId=};;
  esac
done

# start a watchdog to ensure an automated reboot or halt of the machine if the
# preboot init does not succeed (e.g. missing kernel module/firmware for the
# network adaptor)
if [ "${DEBUGLEVEL}" -eq 0 ] ; then
  cat<<EOF >/bin/watchdog
#!/bin/ash
echo \$$ > /tmp/watchdogpid
[ ! -f /proc/version ] && mount -n -t proc proc /proc
sleep 120 2>/dev/null
echo "o" >/proc/sysrq-trigger
EOF
  chmod u+x /bin/watchdog
  watchdog &
else
  getty -i -n -l /bin/ash 38400 tty2 &
fi

if [ -n "${SSID}" ] ; then
  # WLAN setup will most probably change the network interface name stored in
  # nwif (to wlan0 or something like that)
  [ $DEBUGLEVEL -gt 0 ] && echo "set essid to ${essid}";
  #value of essid unchecked yet
  # load network adaptor modules
  cd /lib/modules/$(ls /lib/modules/)/kernel/drivers/net/wireless
  for mod in $(find . | grep .ko | sed 's,.*/\([^/]*\).ko,\1',); do
    echo "Mod:";
    echo $mod;
    modprobe $mod || echo "module $mod did not load for some reason"
    usleep 10000 
  done
  cd /
  wlanif=$(iwconfig 2>/dev/null|sed -n "/ESSID:/p"|sed "s/    .*//")
  [ $DEBUGLEVEL -gt 0 ] && echo "wlancard recognized as ${wlanif}";
  ip link set dev ${wlanif} up
  if iwconfig ${wlanif} mode managed essid "${essid}"; then
    nwif=${wlanif}
  else
    error "  Unable to configure the WLAN interface."
  fi 
  :
else
  # check here for the active Ethernet link
  ip link show dev eth1 >/dev/null 2>&1 && \
    dialog --msgbox "More than one network interface found. This could cause \
some trouble as their activation and ordering depends on the module load \
order ..." 7 65
fi

# set up loopback networking and power up ethernet
ip link set dev lo up
ip addr add 127.0.0.1/8 dev lo
ip link set dev $nwif up || echo "I did not find any usable network adaptor."

# run udhcpc and start a debug shell if no lease could be obtained
mkdir -p /usr/share/udhcpc
echo -e "#!/bin/ash\nunset infomsg HOME IFS mask lease interface DEBUGLEVEL \
BOOT_IMAGE\nset >/tmp/ipstuff" >/usr/share/udhcpc/default.script
chmod u+x /usr/share/udhcpc/default.script
modprobe -q af_packet
[ -n $vci ] && vci="-V $vci"
fetchip
ip addr add $ip/$(ipcalc -s -p $ip $subnet|sed s/.*=//) dev $nwif
ip route add default via $router  

# get the mac address of the boot network adaptor
macaddr=$(ip link show dev $nwif 2>/dev/null | \
      sed -n "/ether [0-9e-f]\{2\}:.*/p" | sed -e "s/.*ether //;s/ .*//")
echo "macaddr=$macaddr" >>/etc/initramfs-setup

# at this point a little selection script could be downloaded, which lets the
# user choose what kind of SLX client he wants to get
dialog --infobox "Fetching preboot interactive part and configuration from \
the net ($boot_uri) ..." 4 65
mkdir -p /preboot
wget -q -O /preboot/preboot.init ${boot_uri}bootloader/env/getinit/formedia/$PBS_ID
chmod u+x /preboot/preboot.init

echo "pbs_id=$PBS_ID" >> /etc/pbs.conf

# start a debug shell if needed, else set quiet kernel parameter
if [ "${DEBUGLEVEL}" -gt 0 ] ; then
  echo "Starting shell, leaving it would continue init."
  /bin/ash
else
  # no debugging output for stage3 run
  echo "quiet=quiet" >>/etc/initramfs-setup
fi
# run the preboot interactive part which finally will execute kexec
cd /preboot
exec ./preboot.init
# we should never return from that one ...
dialog --msgbox "The execution of the main preboot component failed. Please \
check network access of your box. Is $boot_uri reachable!?" 6 65
# ping -c 1 $boot_uri
sleep 20 && echo "o" >/proc/sysrq-trigger