# Copyright (c) 2012 - OpenSLX GmbH
#
# This program/file is free software distributed under the GPL version 2.
# See http://openslx.org/COPYING
#
# If you have any feedback please consult http://openslx.org/feedback and
# send your feedback to feedback@openslx.org
#
# General information about OpenSLX can be found under http://openslx.org
#
# configuration script for general CentOS Linux to configure linux
# stateless clients (included by init, hwautocfg, servconfig within Initial-
# RamFS after inclusion of the main functions file). This file is the main
# base for the several RedHat based Scientific Linux versions.
# settings of central variables
# D_DIRINBINDMNT - lists of directories to be created in bind mounted rw
# part of the client filesystem
# D_RODIRSINRW - ReadOnly Directories in RW part of filesystem to save on
# TempFS usage
# D_DIRINDXS - directories in client filesystem which should be present
# anyhow
D_BINDMPTS="tmp root media home"
D_DIRINBINDMNT="/var/run /var/log /var/tmp"
D_RODIRSINRW="/etc/bootsplash /etc/gconf /var/adm /var/lib/texmf /var/lib/rpm \
/var/cache/fontconfig"
D_DIRINDXS="/var/lib/rpm /var/lib/nobody /var/lib/alternatives/ /var/db/nscd \
/var/lib/bluetooth /var/lib/scrollkeeper /var/lib/nfs/sm /var/lib/nfs/sm.bak \
/var/lib/misc /var/spool/cron"
# empty functions are defined at the beginning of /etc/functions
# distro specific function called from servconfig script
config_distro () {
# clean the runlevel directories which will be populated by the stage3 setup
for dir in rc0.d rc1.d rc2.d rc3.d rc4.d rc5.d rc6.d ; do
rm -rf /mnt/etc/${dir}/*
done
# set some system/environment information
echo -e "SLX VERSION = $SLXVERSION\nINITRAMFS GENERATION DATE = $date" \
>>/mnt/etc/redhat-release
# simple bash configuration for root
echo -e "# Generated in OpenSLX stage3\n. /etc/bashrc" >/mnt/root/.profile
# enable sysrq
sed -e "1i# Configuration modified by $0 during stage3 bootup." \
-e "s/kernel.sysrq =.*/kernel.sysrq = 1/" -i /mnt/etc/sysctl.conf
# set some networking stuff if needed
[ -e /mnt/etc/sysconfig/network ] && \
sed -e "s/HOSTNAME=.*/HOSTNAME=$host_name/" \
-e "s/GATEWAY=.*/GATEWAY=$gateway/" -i /mnt/etc/sysconfig/network
# check for inittab file
#test -f /mnt/etc/inittab || error "$df_erritab"
}
# initial (boot time) runlevel scripts
initial_boot () {
# delete all classical disk base rootfs stuff from rc.sysinit
sed -e "6i# Script modified by $0 during stage3 bootup." \
-e "/relabel_se/,/^}/d" \
-e "/# Start up swap/,/# Set up bin/d" \
-e "/^remount_needed/,/^fi$/d" -e "/^# Clean out/,/in_sysinit/d" \
-e "/# Mount all o/,/# Start the g/d" \
-e "/# Boot time/,/# let's/d" -i /mnt/etc/rc.d/rc.sysinit
# delete all classical disk base rootfs stuff from halt
sed -e "7i# Modified by $0 during stage3 bootup." \
-e "/# Save mixer/,/Saving random/d" -e "/quotaoff/,/^# Now halt/d" \
-i /mnt/etc/init.d/halt
# boot.slx is a special runlevel script generated within initialramfs which
# should be executed before the normal runlevel scripts.
echo -e "# Run OpenSLX init runlevel script\n/etc/init.d/boot.slx" \
>>/mnt/etc/rc.d/rc.sysinit
# switch off SElinux enforcing
sed -e "1i# Configuration modified by $0 during stage3 bootup." \
-e "s/SELINUX=.*/SELINUX=permissive/" -i /mnt/etc/selinux/config
# switch off display manager start via inittab
sed -e "s/x:5:re.*/# line deleted in stage3, re-enable via desktop plugin/" \
-i /mnt/etc/inittab
# link halt and reboot scripts
ln -s ../init.d/killall /mnt/etc/rc.d/rc0.d/S00killall
ln -s ../init.d/halt /mnt/etc/rc.d/rc0.d/S01halt
ln -s ../init.d/killall /mnt/etc/rc.d/rc6.d/S00killall
ln -s ../init.d/halt /mnt/etc/rc.d/rc6.d/S01reboot
}
# linking runlevel scripts
rllinker () {
local script="$1"
if [ $2 -lt 10 ] ; then
local start="0$2"; else local start="$2"
fi
if [ $3 -lt 10 ] ; then
local stop="0$3"; else local stop="$3"
fi
# empty runlevel links - decision on running certain services is passed via
# configuration
for i in rc3.d/K$stop$script rc5.d/K$stop$script \
rc3.d/S$start$script rc5.d/S$start$script ; do
ln -sf ../init.d/$script /mnt/etc/$i
done
}
# group of functions for the normal runlevels - first parameter is start
# second stop
# function for ntp configuration
config_ntp () {
if [ -e /mnt/etc/init.d/ntpd ] ; then
if ! strinfile "ntp:" /mnt/etc/passwd ; then
echo -e "ntp:x:38:38:NTP daemon:/var/lib/ntp:/sbin/nologin" \
>>/mnt/etc/passwd
echo -e "ntp:!:13099:0:99999:7:::" >>/mnt/etc/shadow
fi
testmkd /mnt/var/lib/ntp ntp:ntp
if [ "x$start_ntp" = "xyes" ] ; then
rllinker "ntpd" 7 14
fi
fi
}
# function for atd
config_atd () {
if [ "x$start_atd" = "xyes" ]; then
rllinker "atd" 14 4
fi
}
# function for configuration of cron services
config_cron () {
if [ "x$start_cron" = "xyes" ] ; then
if [ -f /mnt/etc/init.d/cron ] ; then
rllinker "cron" 18 2
testmkd /mnt/var/spool/anacron
echo -e "# /etc/crontab - file generated by $0:\n\
" >/mnt/etc/crontab
else
error "$df_errcron" nonfatal
fi
fi
}
# name service caching daemon (useful in most cases)
config_nscd () {
if [ -f /mnt/etc/init.d/nscd ] ; then
testmkd /mnt/var/db/nscd
rllinker "nscd" 20 5
fi
}
# secure shell service
config_sshd () {
if [ "x$start_sshd" = "xyes" ] ; then
if [ -f /mnt/etc/init.d/sshd ] ; then
testmkd /mnt/var/empty/sshd/dev
if ! strinfile "sshd:" /mnt/etc/passwd ; then
echo -e "sshd:x:74:74::/var/empty/sshd:/sbin/nologin" \
>>/mnt/etc/passwd
echo -e "sshd:!:13099:0:99999:7:::" >>/mnt/etc/shadow
fi
rllinker "sshd" 25 10
else
error "$df_errsshd" nonfatal
fi
fi
}
# snmp agent for remote monitoring
config_snmp () {
if [ "x$start_snmp" = "xyes" ] ; then
if [ -f /mnt/etc/init.d/snmpd ] ; then
rllinker "snmpd" 24 2
testmkd /mnt/var/lib/net-snmp
fi
# fixme!!
# write service monitor depending on services started
fi
}
# configure print server (lpd or cups)
config_printer () {
if [ "x${start_printdaemon}" != "x" ] && \
[ "x${start_printdaemon}" != "xno" ]; then
case ${start_printdaemon} in
yes|cups*|CUPS*)
rllinker "cups" 25 1
testmkd /mnt/var/spool/cups/tmp root:sys
;;
lp*|LP*|PLP*)
rllinker "lpd" 25 1
testmkd /mnt/var/spool/lpd
;;
*)
#logwrite "Do not know print-server $start_printdaemon; \
#specify 'cups' or 'lpd'."
;;
esac
fi
# configure cups printer client, avoid to overwrite admin provided printer
# configuration file
if [ "x$lpr_servers" != "x" ] && [ ! -e /rootfs/etc/cups/client.conf ] ; then
echo -e "# /etc/cups/client.conf - file generated by\n#\t$0:\n\
#\t$date\n#\nServerName\t$lpr_servers" >/mnt/etc/cups/client.conf
fi
}
# configure bluetooth services
config_bt () {
if [ -e /mnt/etc/sysconfig/bluetooth ] ; then
sed -e "1i# /etc/sysconfig/bluetooth - file modified by $0" \
-e "s,HID2HCI_ENABLE.*,HID2HCI_ENABLE=true," \
-i /mnt/etc/sysconfig/bluetooth
else
: # no bluetooth components installed
fi
}
# set up localization like keytable and consolefont
dlocale () {
echo -e "\t# entries added by $0: $date" >> /mnt/etc/init.d/boot.slx
sed -e "s,KEYTABLE=.*,KEYTABLE=\"${KEYTABLE}\"," \
-i /mnt/etc/sysconfig/keyboard
#echo -e "\tsetfont ${CONSOLE_FONT} >${LOGFILE} 2>&1\n" \
# >>/mnt/etc/init.d/boot.slx
}
# acpi and powersave daemons, required e.g. to shutdown the machine via
# power button, no need for early start
config_acpi () {
rllinker acpid 01 22
}
# configure dbus (inter application communication for kde and gnome), hal
# (hardware abstraction layer - used e.g. by powersaved) and resmgr
# (resource manager - the user gets permissions to devices when loggin on)
# runlevel script for haldaemon is now haldaemon instead of hal
config_dreshal () {
local start=4
local stop=18
if [ "x$start_dreshal" = "xyes" ]; then
testmkd /mnt/var/run/dbus
if [ -f /mnt/etc/init.d/messagebus ] ; then
testmkd /mnt/var/lib/dbus
strinfile "dbus:" /mnt/etc/passwd || \
echo "dbus:x:81:81:System Message Bus:/var/run/dbus:/sbin/nologin" \
>> /mnt/etc/passwd
strinfile "dbus:" /mnt/etc/group || echo "dbus:!:81:" >> /mnt/etc/group
rllinker "messagebus" $start $stop
fi
if [ -f /mnt/etc/init.d/haldaemon ] ; then
testmkd /mnt/var/lib/hal haldaemon:haldaemon
testmkd /mnt/var/run/hal haldaemon:haldaemon
testmkd /mnt/var/cache/hald haldaemon:haldaemon
strinfile "haldaemon:" /mnt/etc/passwd || \
echo "haldaemon:x:68:68:User for haldaemon:/var/run/hal:/sbin/nologin" \
>> /mnt/etc/passwd
strinfile "haldaemon:" /mnt/etc/group || \
echo "haldaemon:!:103:" >> /mnt/etc/group
start=$(($start + 1))
stop=$(($stop - 1))
rllinker "haldaemon" $start $stop
fi
fi
}
# configure automounter (fixme: to be moved into plugin)
config_automount () {
if [ -e /mnt/etc/sysconfig/autofs ] ; then
testmkd /mnt/var/lock/subsys
sed -e "1i# /etc/sysconfig/autofs - file modified by\n#\t$0:\n#" \
-e "s,DAEMONOPTIONS.*,DAEMONOPTIONS=\"--timeout 3\"," \
-i /mnt/etc/sysconfig/autofs
rllinker "autofs" 18 4
else
error "$df_erramt" nonfatal
fi
}
# start name service caching daemon
config_nscd () {
if [ -e /mnt/etc/init.d/nscd ] ; then
testmkd /mnt/var/run/nscd
rllinker "nscd" 16 16
else
error "$df_errnsc" nonfatal
fi
}
# start portmapper (needed at least for nfs and nis services)
config_portmap () {
rllinker "portmap" 2 20
}
# start NIS (mostly deprecated)
config_nis () {
if [ -f /mnt/etc/init.d/ypbind ] ; then
rllinker "ypbind" 6 16
config_portmap
testmkd /mnt/var/yp/nicknames
else
error "$df_erryp" nonfatal
fi
}
# initialize runlevel skript to be executed during system startup
# (before most of the normal boot init scripts)
# this script should operate like a normal runlevel script
d_mkrlscript () {
local switch="$1"
local name="$2"
local info="$3"
case "$1" in
init)
echo -e "#!/bin/sh\n# skeleton of /etc/init.d/${name} created \
by $0\n# after you applied changes to the creation scripts you have to \
rerun\n# the mkdxsinitrd script to get them applied\n\
. /etc/rc.d/init.d/functions\n#. /etc/sysconfig/logfile\ncase \
\"\$1\" in\n start)\n\techo -n \"$info\"" >>/mnt/etc/init.d/${name}
chmod u+x /mnt/etc/init.d/${name}
;;
entry)
echo -e "\t${info}" >>/mnt/etc/init.d/${name}
;;
close)
echo -e "\t;;\n stop)\n\t;;\nesac" \
>>/mnt/etc/init.d/${name}
;;
esac
}
