path: root/src/initramfs/distro-specs/suse/functions-default

# Copyright (c) 2003..2006 - RZ Uni Freiburg
# Copyright (c) 2006..2010 - OpenSLX GmbH
#
# This program/file is free software distributed under the GPL version 2.
# See http://openslx.org/COPYING
#
# If you have any feedback please consult http://openslx.org/feedback and
# send your feedback to feedback@openslx.org
#
# General information about OpenSLX can be found under http://openslx.org
#
# configuration script for general SuSE to configure linux stateless clients 
# (included by init, hwautocfg, servconfig within InitialRamFS after 
# inclusion of the main functions file). This file is the main base for the
# several SuSE distro versions

# settings of central variables (formerly done via config-*, these variables
# are disputable ...)
# D_DIRINBINDMNT - lists of directories to be created in bind mounted rw
# part of the client filesystem
# D_RODIRSINRW - ReadOnly Directories in RW part of filesystem to save on 
# TempFS usage
# D_DIRINDXS - directories in client filesystem which should be present 
# anyhow
D_BINDMPTS="tmp root media home"
D_DIRINBINDMNT="/var/run /var/log /var/tmp"
D_RODIRSINRW="/etc/bootsplash /etc/gconf /etc/X11/xkb /var/adm /var/lib/texmf \
/var/lib/rpm /var/cache/fontconfig"
D_DIRINDXS="/var/X11R6/compose-cache /var/run/sysconfig/tmp /var/adm \
/var/lib/rpm /var/lib/nobody /var/lib/pam_devperm /var/lib/bluetooth \
/var/lib/texmf /var/lib/nfs/sm /var/lib/nfs/sm.bak /var/lib/misc \
/var/lib/acpi /var/spool/cron /var/lock/subsys/sysconfig"

# empty functions are defined at the beginning of /etc/functions

# distro specific function called from servconfig script
config_distro () {
# clean the runlevel directories which will be populated by the stage3 setup
for dir in rc0.d rc1.d rc2.d rc3.d rc4.d rc5.d rc6.d boot.d ; do
  rm -rf /mnt/etc/init.d/${dir}/*
done
rm -rf /mnt/etc/init.d/.depend.*
touch /mnt/var/log/btmp
touch /mnt/var/log/lastlog

# link the additional key setup (notbook special keys)
grep -q -E "otebook" /etc/hwinfo.bios && \
  [ -e /mnt/etc/init.d/hotkey-setup ] && rllinker "hotkey-setup" 25 25
# no need to run start scripts in parallel
# enable magic sysrequest for the clients
sed -e "1i# /etc/sysconfig/sysctl - modified by $0 version $version" \
    -e "s,ENABLE_SYSRQ=.*,ENABLE_SYSRQ=\"yes\"," \
    -i /mnt/etc/sysconfig/sysctl
# add slx specific path /var/opt/openslx/bin ...
echo -e "# stuff generated by $0 (out of InitRamFS written $date)\n\
PATH=\"\$PATH:/var/opt/openslx/bin\"\n\
test \"\$UID\" -ge 100 && PATH=\"\$PATH:.\"\n\
QTDIR=/usr/lib/qt3\nexport QTDIR\nno_proxy='localhost'\n\
export no_proxy" >/mnt/etc/SuSEconfig/profile
echo -e "SLX VERSION = $SLXVERSION\nINITRAMFS GENERATION DATE = $date" \
  >>/mnt/etc/SuSE-release

# remove annoying udev rule set for changing eth interface and rtc symlink
rm /mnt/etc/udev/rules.d/*persistent-net.rules \
   /mnt/etc/udev/rules.d/*net_persistent_names.rules >/dev/null 2>&1
sed '/SYMLINK+="rtc"/d' -i \
     /mnt/etc/udev/rules.d/50-udev-default.rules >/dev/null 2>&1

# create a stateless specific halt script
echo -e '#!/bin/sh\n# script generated in InitRamFS (SLX stage3)
. /etc/rc.status\n
trap "echo" SIGINT SIGSEGV SIGQUIT SIGTERM\nset +e\n\n
case "$0" in\n\t*halt)
\t   message="The system will be halted immediately."
\t   command="halt -p"\n\t   ;;\n\t*reboot)\n
\t   message="Please stand by while rebooting the system..."
\t   command="reboot"\n\t   ;;\nesac\n
rc_reset\ntest -e /etc/init.d/halt.local && {
\techo Running /etc/init.d/halt.local\n\t/bin/sh /etc/init.d/halt.local
\trc_status -v1 -r\n}
echo $message\nexec $command -d -f' >/mnt/etc/init.d/halt
# add the halt link to the 0 and 6 runlevel directories
ln -sf ../halt /mnt/etc/init.d/rc0.d/S20halt
ln -sf ../halt /mnt/etc/init.d/rc6.d/S20reboot
  
echo "LOGFILE=${LOGFILE}" >/mnt/etc/sysconfig/logfile
# fixme: rather ugly to write that boot script this way
echo '
#!/bin/sh
# SuSE specific initial boot file modified for the use with OpenSLX clients
#
###########################################################################

# Configuration and coloring of the boot messages
. /etc/rc.status
. /etc/sysconfig/boot
. /etc/sysconfig/logfile

# Avoid be interrupted by child or keyboard
trap "echo" SIGINT SIGSEGV SIGQUIT
set +e

# reasonable start values for bootsplash progress
export progress=0
export sscripts=45
export kscripts=45

echo -n "System Boot Control: "
echo "Running $0"

###########################################################################
#

# some important (un)mounts
rc_reset
echo -n "Mounting /proc, /sys and /dev/pts filesystems"
# file /etc/fstab in some scenarios not available
mount -t proc proc /proc &>/dev/null
rc_status -v -r

echo -n "Mounting /dev/pts"
mount -t devpts -o mode=0620,gid=5 devpts /dev/pts
rc_status -v -r
if [ -d /sys ] ; then
    while read a b c  ; do
        case "$b" in
            sysfs)
                echo -n "Mounting /sys filesystem"
                echo -e "sysfs\t\t/sys\t\tsysfs\t\trw\t\t 0 0\n" \
                  >>/etc/fstab
                mount -t sysfs sysfs /sys
                rc_status -v -r
                break
                ;;
        esac
    done < /proc/filesystems
fi

# Start blogd, requires /proc and /dev/pts.
# Export the real device in variable REDIRECT.
test -x /sbin/blogd -a -n "$REDIRECT" && /sbin/blogd $REDIRECT
if test -z "$REDIRECT" ; then
    if (echo -n > /dev/tty) 2>/dev/null ; then
        REDIRECT=/dev/tty
    else
        REDIRECT=/dev/console
    fi
fi

###########################################################################
#
# Save old terminal settings and set -nl to avoid staircase
# effect, do not lock scrolling, and avoid break characters.
otty=$(stty -g)
if test "$FLOW_CONTROL" = "yes" ; then
    stty -nl  ixon ignbrk -brkint
else
    stty -nl -ixon ignbrk -brkint
fi

###########################################################################
#
# Common used variables
bootrc=/etc/init.d/boot.d
rex="[0-9][0-9]"
failed=""
skipped=""
callord=""

#
# Initialize boosplash progressbar variables
#
. /etc/rc.splash B
splashtrigger "rlchange B"

###########################################################################
#
# Do we stop/start script in parallel?
startpar=$(type -p startpar)
test "$RUN_PARALLEL" = "yes" || startpar=""

# Start bootup client scripts.
if test -d ${bootrc}/ ; then
    for i in ${bootrc}/S*; do
        test -f $i || continue

        B=${i##*/}
        script=${B#*S$rex}
        B=${B%$script}

        rc_splash "$script start"

        if test -z "$startpar" ; then
            blogger "$script start"

            if test -x "$i" ; then
                $i start
            else
                echo Running $i
                /bin/sh $i b
                rc_status -v1 -r
            fi
            status=$?
            echo -en "$rc_reset"

            case $status in
            [1-4])   failed="${failed:+$failed }$script"   ;;
            [56])   skipped="${skipped:+$skipped }$script" ;;
            [07]|*) ;;
            esac

            blogger "$script start exits with status $status"
        else
            # Parallel boot only for valid scripts
            test -x $i || continue

            # Current vector
            eval cur=\${$B}
            test -n "$cur" || callord="${callord:+$callord }$B"

            # Remember scripts
            eval $B="\${cur:+$i }\${cur:-$i}"
        fi
    done
fi

###########################################################################
#
# Call the scripts in correct order
if test -n "$startpar" ; then
    declare -i s
    for p in $callord ; do
        vect=$p
        eval p=(\${$p})

        blogger "run boot scripts (${p[@]##*S$rex})"
        if test ${#p[@]} -eq 1 ; then
            ${p} start
            status=($?)
        else
            status=($($startpar -t 30 -T 3 -a start ${p[@]}))
        fi
        echo -en "$rc_reset"
        blogger "exit status of (${p[@]##*S$rex}) is (${status[@]})"

        s=0
        for script in ${p[@]##*S$rex} ; do
            case "${status[$s]}" in
            [1-4])  failed="${failed:+$failed }$script"   ;;
            [56])  skipped="${skipped:+$skipped }$script" ;;
            0|*)   ;;
            esac
            : $((s++))
        done
    done
fi

###########################################################################
#
# Be verbose and print stats
echo -n "System Boot Control: "
echo -e "The system has been ${stat}${extd}set up${norm}"
if test -n "$failed" ; then
    n=$((${#failed} + 7))
    echo -n  "Failed features: "
    test $n -lt 47 && echo -en "\033[${COLUMNS}C\033[${n}D"
    echo -e  "${warn}${failed}${norm}"
fi
if test -n "$skipped" ; then
    n=$((${#skipped} + 7))
    echo -n  "Skipped features: "
    test $n -lt 47 && echo -en "\033[${COLUMNS}C\033[${n}D"
    echo -e  "${attn}${skipped}${norm}"
fi

###########################################################################
#
# Check for boot cycle detection
test -s /lib/bootcycle/stats && . /lib/bootcycle/stats

# Restore old terminal settings
stty $otty

###########################################################################
#
# Let zic set timezone - if present (from boot.ldconfig).
if test -n "$TIMEZONE" -a -x /usr/sbin/zic ; then
        echo -n Setting up timezone data
        /usr/sbin/zic -l $TIMEZONE
        rc_status -v -r
fi

###########################################################################
#
# start user defined bootup script.
if test -f /etc/init.d/boot.local ; then
        ECHO_RETURN=$rc_done_up
        echo "Running /etc/init.d/boot.local"
        /bin/sh /etc/init.d/boot.local || rc_failed
        rc_status -v1; rc_reset
        rc_splash "boot.local start"
fi

rc_reset
exit 0' >/mnt/etc/init.d/boot
## end of initial stage4 boot script

# enable execution of all important start scripts
# running stuff in parallel seems to be rather useless and generates some
# difficult to solve problems. If you want to try nevertheless enable the
# following line and disable the latter one (switching off that feature)
sed -e "s,RUN_PARALLEL=.*,RUN_PARALLEL=\"no\"," \
    -i /mnt/etc/sysconfig/boot
# if YaST2 should be runnable (without much effect anyway) on the client
testmkd /mnt/var/log/YaST2
# for screen sessions
testmkd /mnt/var/run/uscreens 4777
# set special SuSE HOSTNAME file
echo "$host_name" > /mnt/etc/HOSTNAME
# produce proper output formatting (of "done", "failed", ...)
sed -e '/^test $LINES/ {
i\
# Script modified here by \$0 during stage3 bootup\
LINECOL=$(stty size); LINES=${LINECOL% *}; COLUMNS=${LINECOL#* }
}'  -e "/^if test -z \"\$LINES/,/fi$/d" -i /mnt/etc/rc.status
# check for inittab file
test -f /mnt/etc/inittab || error "$df_erritab"
}

# initial (boot time) runlevel scripts
initial_boot () {
local scripts=$*
local count=10
# check if /mnt/etc/init.d/boot.compcache aka ramzswap is available
[ -f /mnt/etc/init.d/boot.compcache ] && COMPCACHE=boot.compcache
# boot.slx is a special runlevel script generated within initialramfs which
# should be executed before the normal runlevel scripts. Proper shutdown is
# not needed!?
for i in boot.udev boot.proc boot.klog boot.loadmodules boot.slx boot.clock \
boot.sysctl boot.ipconfig $COMPCACHE boot.swap $D_SPLASHY kbd; do
  count=$(($count + 1))
  [ $DEBUGLEVEL -ge 2 ] && echo "boot-runlevelscript $i"
  ln -sf /etc/init.d/$i /mnt/etc/init.d/boot.d/S${count}$i
done
}

# linking runlevel scripts
rllinker () {
local script="$1"
if [ $2 -lt 10 ] ; then
  local start="0$2"; else local start="$2"
fi
if [ $3 -lt 10 ] ; then
  local stop="0$3"; else local stop="$3"
fi
# empty runlevel links - decision on running certain services is
# passed via configuration
for i in rc3.d/K$stop$script rc5.d/K$stop$script \
         rc3.d/S$start$script rc5.d/S$start$script ; do
  ln -sf ../$script /mnt/etc/init.d/$i
done
}

# group of functions for the normal runlevels - first parameter is start
# second stop
# function for ntp configuration
config_ntp () {
if [ -e /mnt/etc/init.d/ntp ] ; then
  if ! strinfile "ntp:" /mnt/etc/passwd ; then
    echo -e "ntp:x:74:65534:NTP daemon:/var/lib/ntp:/bin/false" \
      >>/mnt/etc/passwd
    echo -e "ntp:!:13099:0:99999:7:::" >>/mnt/etc/shadow
  fi
  testmkd /mnt/var/lib/ntp/var/run/ntp
  if [ "x$start_ntp" = "xyes" ] ; then
    rllinker "ntp" 7 14
  fi
fi
}
# function for atd
config_atd () {
if [ "x$start_atd" = "xyes" ]; then
  rllinker "atd" 14 4
fi
}
# function for configuration of cron services
config_cron () {
if [ "x$start_cron" = "xyes" ] ; then
  if [ -f /mnt/etc/init.d/cron ] ; then
    rllinker "cron" 18 2
    testmkd /mnt/var/spool/cron/lastrun
    testmkd /mnt/var/spool/cron/tabs
    echo -e "# /etc/crontab - file generated by $0:\n\
#\t$date\nSHELL=/bin/sh\nPATH=/usr/bin:/usr/sbin:/sbin:/bin:/usr/lib/news/bin\
\nMAILTO=\n-*/15 * * * *\troot\ttest -x /usr/lib/cron/run-crons && \
/usr/lib/cron/run-crons >/dev/null 2>&1" >/mnt/etc/crontab
  else
    error "$df_errcron" nonfatal
  fi 
fi
}
# name service caching daemon (useful in most cases)
config_nscd () {
  if [ -f /mnt/etc/init.d/nscd ] ; then
    rllinker "nscd" 20 5
  fi
}
# secure shell service
config_sshd () {
if [ "x$start_sshd" = "xyes" ] ; then
  if [ -f /mnt/etc/init.d/sshd ] ; then
    testmkd /mnt/var/run/sshd
    testmkd /mnt/var/lib/empty
    if ! strinfile "sshd:" /mnt/etc/passwd ; then
      echo -e "sshd:x:117:65534::/var/run/sshd:/usr/sbin/nologin" \
        >>/mnt/etc/passwd
      echo -e "sshd:!:13099:0:99999:7:::" >>/mnt/etc/shadow
    fi
    # set permissions with userid
    #d_mkrlscript entry boot.slx "chown sshd:nogroup /var/run/sshd \
    # /var/lib/empty 2>/dev/null"
    rllinker "sshd" 25 10
  else
    error "$df_errsshd" nonfatal
  fi
fi
}
# snmp agent for remote monitoring
config_snmp () {
if [ "x$start_snmp" = "xyes" ] ; then
  if [ -f /mnt/etc/init.d/snmpd ] ; then
    rllinker "snmpd" 24 2
    testmkd /mnt/var/lib/net-snmp
  fi
    # fixme!!
    # write service monitor depending on services started
  fi
}
# configure print server (lpd or cups)
config_printer () {
if [ "x${start_printdaemon}" != "x" ] && \
  [ "x${start_printdaemon}" != "xno" ]; then
  case ${start_printdaemon} in
    yes|cups*|CUPS*)
      rllinker "cups" 25 1
      testmkd /mnt/var/spool/cups/tmp
      #chown -R lp:lp /var/spool/cups
    ;;
    lp*|LP*|PLP*)
      rllinker "lpd" 25 1
      testmkd /mnt/var/spool/lpd
      #chown -R lp:lp /var/spool/lpd
    ;;
    *)
    #logwrite "Do not know print-server $start_printdaemon; \
    #specify 'cups' or 'lpd'."
    ;;
  esac
fi   
# configure cups printer client, avoid to overwrite admin provided printer
# configuration file
if [ "x$lpr_servers" != "x" ] && [ ! -e /rootfs/etc/cups/client.conf ] ; then
  echo -e "# /etc/cups/client.conf - file generated by\n#\t$0:\n\
#\t$date\n#\nServerName\t$lpr_servers" >/mnt/etc/cups/client.conf
fi
}
# configure bluetooth services
config_bt () {
if [ -e /mnt/etc/sysconfig/bluetooth ] ; then
  sed -e "1i# /etc/sysconfig/bluetooth - file modified by $0" \
      -e "s,START_SERVICES.*,START_SERVICES=\"yes\"," \
      -i /mnt/etc/sysconfig/bluetooth
else
  : # no bluetooth components installed
fi
}
# set up localization like keytable and consolefont
dlocale () {
d_mkrlscript entry boot.slx "# entries added by $0: $date"
sed -e "s,KEYTABLE=.*,KEYTABLE=\"${KEYTABLE}\"," \
  -i /mnt/etc/sysconfig/keyboard
d_mkrlscript entry boot.slx "#loadkeys ${KEYTABLE} >${LOGFILE} 2>&1"
d_mkrlscript entry boot.slx "#setfont ${CONSOLE_FONT} >${LOGFILE} 2>&1"
sed -e "s,RC_LANG=.*,RC_LANG=\"${LANG}\" # added in initrd," \
    -i /mnt/etc/sysconfig/language
}
# acpi and powersave daemons, required e.g. to shutdown the machine via
# power button, no need for early start
config_acpi () {
rllinker acpid 22 12
rllinker powersaved 23 11
# dbus is required to run acpid and powersaved
start_dreshal="yes"
}
# configure dbus (inter application communication for kde and gnome), hal
# (hardware abstraction layer - used e.g. by powersaved) and resmgr
# (resource manager - the user gets permissions to devices when loggin on)
# runlevel script for haldaemon is now haldaemon instead of hal
config_dreshal () {
local start=0
local stop=18
if [ "x$start_dreshal" = "xyes" ]; then
  for dir in /var/run/resmgr/classes /var/lib/PolicyKit; do
    testmkd /mnt/$dir
  done
  if [ -f /mnt/etc/init.d/dbus ] ; then
    strinfile "messagebus:" /mnt/etc/passwd || \
      echo "messagebus:x:100:101:User for D-BUS:/var/run/dbus:/bin/false" \
        >> /mnt/etc/passwd
    strinfile "messagebus:" /mnt/etc/group || \
      echo "messagebus:!:101:" >> /mnt/etc/group
	# create directories and set permissions with user and group id
    testmkd /mnt/var/run/dbus messagebus:messagebus
    rllinker "dbus" $start $stop
  fi
  if [ -f /mnt/etc/init.d/consolekit ] ; then
    strinfile "polkituser:" /mnt/etc/passwd || \
      echo "polkituser:x:104:106:PolicyKit:/var/run/PolicyKit:/bin/false" \
        >> /mnt/etc/passwd
    start=$(($start + 1))
    stop=$(($stop - 1))
    rllinker "consolekit" $start $stop
    echo -n > /mnt/var/lib/misc/PolicyKit.reload
    chmod a+x /mnt/var/lib/misc/PolicyKit.reload
  fi
  if [ -f /mnt/etc/init.d/resmgr ] ; then
    start=$(($start + 1))
    stop=$(($stop - 1))
    rllinker "resmgr" $start $stop
  fi
  if [ -f /mnt/etc/init.d/haldaemon ] ; then
    strinfile "haldaemon:" /mnt/etc/passwd || \
      echo "haldaemon:x:105:103:User for haldaemon:/var/run/hal:/bin/false" \
        >> /mnt/etc/passwd
    strinfile "haldaemon:" /mnt/etc/group || \
      echo "haldaemon:!:103:" >> /mnt/etc/group
    echo -n "" > /mnt/var/lib/PolicyKit.reload
    # create directories and set permissions with user and group id
    testmkd /mnt/var/run/hal haldaemon:haldaemon
	testmkd /mnt/var/cache/hald haldaemon:haldaemon
    start=$(($start + 1))
    stop=$(($stop - 1))
    rllinker "haldaemon" $start $stop
  fi
fi
}
# configure automounter (fixme: to be moved into plugin)
config_automount () {
if [ -e /mnt/etc/sysconfig/autofs ] ; then
  testmkd /mnt/var/lock/subsys
  sed -e "1i# /etc/sysconfig/autofs - file modified by\n#\t$0:\n#" \
      -e "s,AUTOFS_OPTIONS.*,AUTOFS_OPTIONS=\"--timeout 3\"," \
      -i /mnt/etc/sysconfig/autofs
  rllinker "autofs" 18 4
  # might be needed for autofs via NFS (start specific nfs related services)
  # echo 'NFS_START_SERVICES="no"' >>/mnt/etc/sysconfig/nfs
else
  error "$df_erramt" nonfatal
fi
}
# start name service caching daemon
config_nscd () {
if [ -e /mnt/etc/init.d/nscd ] ; then
  testmkd /mnt/var/run/nscd
  rllinker "nscd" 16 16
else
  error "$df_errnsc" nonfatal
fi
}
# start portmapper (needed at least for nfs and nis services)
config_portmap () {
  rllinker "portmap" 2 20
}
# start NIS (mostly deprecated)
config_nis () {
if [ -f /mnt/etc/init.d/ypbind ] ; then
  rllinker "ypbind" 6 16
  config_portmap
  testmkd /mnt/var/yp/nicknames
else
  error "$df_erryp" nonfatal
fi
}
# initialize runlevel skript to be executed during system startup
# (before most of the normal boot init scripts)
# this script should operate like a normal runlevel script
d_mkrlscript () {
local switch="$1"
local name="$2"
local info="$3"
case "$1" in
  init)
    echo -e "#!/bin/sh\n# skeleton of /etc/init.d/${name} created \
by $0\n# after you applied changes to the creation scripts you have to \
rerun\n# the mkdxsinitrd script to get them applied\n\
. /etc/rc.status\n. /etc/sysconfig/logfile\nrc_reset\ncase \
\"\$1\" in\n    start)\n\techo -n \"$info\"" >>/mnt/etc/init.d/${name}
    chmod u+x /mnt/etc/init.d/${name}
    touch /mnt/etc/sysconfig/logfile
  ;;
  entry)
    echo -e "\t${info}" >>/mnt/etc/init.d/${name}
  ;;
  close)
    echo -e "\trc_status -v\n\t;;\n    stop)\n\t;;\nesac\nrc_exit" \
      >>/mnt/etc/init.d/${name}
  ;;
esac
}