change dir structure

1 files changed, 0 insertions, 227 deletions

diff --git a/os-plugins/plugins/vmware/OpenSLX/Distro/Debian.pm b/os-plugins/plugins/vmware/OpenSLX/Distro/Debian.pm
deleted file mode 100644
index fb7b4998..00000000
--- a/os-plugins/plugins/vmware/OpenSLX/Distro/Debian.pm
+++ /dev/null
@@ -1,227 +0,0 @@
-# Copyright (c) 2008 - OpenSLX GmbH
-#
-# This program is free software distributed under the GPL version 2.
-# See http://openslx.org/COPYING
-#
-# If you have any feedback please consult http://openslx.org/feedback and
-# send your suggestions, praise, or complaints to feedback@openslx.org
-#
-# General information about OpenSLX can be found at http://openslx.org/
-# -----------------------------------------------------------------------------
-# vmware/OpenSLX/Distro/debian.pm
-#    - provides Debian-specific overrides of the Distro API for the vmware 
-#      plugin.
-# -----------------------------------------------------------------------------
-package vmware::OpenSLX::Distro::Debian;
-
-use strict;
-use warnings;
-
-use base qw(vmware::OpenSLX::Distro::Base);
-
-use OpenSLX::Basics;
-use OpenSLX::Utils;
-
-################################################################################
-### interface methods
-################################################################################
-
-sub fillRunlevelScript
-{
-    my $self     = shift;
-    my $location = shift;
-    my $kind     = shift;
-
-    my $script = unshiftHereDoc(<<"    End-of-Here");
-        #!/bin/sh
-        # Ubuntu/Debian specific start/stop script, generated via stage1 'vmware'
-        # plugin install
-        # inspiration taken from vmware start script:
-        #   Copyright 1998-2007 VMware, Inc.  All rights reserved.
-        #
-        # This script manages the services needed to run VMware software
-        
-        # Basic support for the Linux Standard Base Specification 1.3
-        ### BEGIN INIT INFO
-        # Provides: VMware
-        # Required-Start: \$syslog
-        # Required-Stop:
-        # Default-Start: 2 3 5
-        # Default-Stop: 0 6
-        # Short-Description: Manages the services needed to run VMware software
-        # Description: Manages the services needed to run VMware software
-        ### END INIT INFO
- 
-        load_modules() {
-    End-of-Here
-    
-    # Load modules
-    if ($kind eq 'local' || $kind eq 'local25' || $kind eq 'local30') {
-        if ($kind eq 'local30') {
-            $script .= unshiftHereDoc(<<"            End-of-Here");
-                  # vmplayer 3.0 specific stuff
-                  insmod /lib/modules/\$(uname -r)/misc/vsock.ko || return 1
-                  insmod /lib/modules/\$(uname -r)/misc/vmci.ko || return 1
-            End-of-Here
-        }
-        $script .= unshiftHereDoc(<<"        End-of-Here");
-              # to be filled in via the stage1 configuration script
-              insmod /lib/modules/\$(uname -r)/misc/vmmon.ko || return 1
-              insmod /lib/modules/\$(uname -r)/misc/vmnet.ko || return 1
-              insmod /lib/modules/\$(uname -r)/misc/vmblock.o 2>/dev/null || return 0
-        End-of-Here
-    } elsif ($kind eq 'vmpl1.0') {
-        $script .= unshiftHereDoc(<<"        End-of-Here");
-              vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind}/
-              module_src_path=\${vmware_kind_path}/vmroot/modules
-              insmod \${module_src_path}/vmmon.ko
-              insmod \${module_src_path}/vmnet.ko
-        End-of-Here
-    } elsif ($kind eq "vmpl2.0") {
-        $script .= unshiftHereDoc(<<"        End-of-Here");
-              vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind}/
-              module_src_path=\${vmware_kind_path}/vmroot/modules
-              insmod \${module_src_path}/vmmon.ko
-              insmod \${module_src_path}/vmnet.ko
-              insmod \${module_src_path}/vmblock.ko
-        End-of-Here
-    } elsif ($kind eq 'vmpl2.5') {
-        $script .= unshiftHereDoc(<<"        End-of-Here");
-              vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind}/
-              module_src_path=\${vmware_kind_path}/vmroot/modules
-              insmod \${module_src_path}/vmmon.ko
-              insmod \${module_src_path}/vmnet.ko
-              insmod \${module_src_path}/vmblock.ko
-        End-of-Here
-    } elsif ($kind eq 'vmpl3.0') {
-        $script .= unshiftHereDoc(<<"        End-of-Here");
-              vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind}/
-              module_src_path=\${vmware_kind_path}/vmroot/modules
-              insmod \${module_src_path}/vmmon.ko
-              insmod \${module_src_path}/vmnet.ko
-              insmod \${module_src_path}/vmblock.ko
-              insmod \${module_src_path}/vsock.ko
-              insmod \${module_src_path}/vmci.ko
-        End-of-Here
-    }
-
-    # unload modules
-    $script .= unshiftHereDoc(<<"    End-of-Here");
-        }
-
-        unload_modules() {
-          # to be filled with the proper list within via the stage1
-          # configuration script
-          rmmod vmmon vmblock vmnet vmmon vmci vsock 2>/dev/null
-        }
-    End-of-Here
-
-    # setup vmnet0 and vmnet8
-    # depends on specific stage3 setting. I let this if in the code
-    # because else this whole if-reducing process will become more
-    # complicated and the code will get less understandable
-    $script .= unshiftHereDoc(<<"    End-of-Here");
-        # the bridged interface
-        setup_vmnet0() {
-          if [ -n "\$vmnet0" ] ; then
-            # the path might be directly point to the plugin dir
-    End-of-Here
-    if ($kind eq 'vmpl2.5' || $kind eq 'vmpl3.0' || $kind eq 'local25' || $kind eq 'local30') {
-        $script .= "    $location/vmnet-bridge -d /var/run/vmnet-bridge-0.pid -n 0\n";
-    } else {
-        $script .= "    $location/vmnet-bridge -d /var/run/vmnet-bridge-0.pid /dev/vmnet0 eth0\n";
-    }
-    $script .= unshiftHereDoc(<<"        End-of-Here");
-          fi
-        }
-        # we definately prefer the hostonly interface for NATed operation too
-        # distinction is made via enabled forwarding
-        setup_vmnet1() {
-          if [ -n "\$vmnet1" ] ; then
-            # the path might be directly point to the plugin dir
-            $location/vmnet-netifup -d /var/run/vmnet-netifup-vmnet1.pid \\
-              /dev/vmnet1 vmnet1
-            dhcpif="\$dhcpif vmnet1"
-            ip addr add \$vmnet1 dev vmnet1
-            ip link set vmnet1 up
-            if [ -n "\$vmnet1nat" ] ; then
-              # needs refinement interface name for eth0 is known in stage3 already
-              echo "1" > /proc/sys/net/ipv4/conf/vmnet1/forwarding 2>/dev/null
-              echo "1" > /proc/sys/net/ipv4/conf/eth0/forwarding 2>/dev/null
-              #iptables -A -s vmnet1 -d eth0
-            fi
-            $location/vmnet-dhcpd -cf /etc/vmware/dhcpd-vmnet1.conf -lf \\
-              /var/run/vmware/dhcpd-vmnet1.leases \\
-              -pf /var/run/vmnet-dhcpd-vmnet1.pid vmnet1 2>/dev/null # or logfile 
-          fi
-        }
-        # incomplete ...
-        setup_vmnet8() {
-          if [ -n "\$vmnet8" ] ; then
-            # we don't need the following test. It's handled by
-            #   XX_vmware.sh
-            #test -c /dev/vmnet8 || mknod c 119 8 /dev/vmnet8
-            $location/vmnet-netifup -d /var/run/vmnet-netifup-vmnet8.pid \\
-              /dev/vmnet8 vmnet8
-            ip addr add \$vmnet8 dev vmnet8
-            ip link set vmnet8 up
-            # /etc/vmware/vmnet-natd-8.mac simply contains a mac like 00:50:56:F1:30:50
-            $location/vmnet-natd -d /var/run/vmnet-natd-8.pid \\
-              -m /etc/vmware/vmnet-natd-8.mac -c /etc/vmware/nat.conf 2>/dev/null # or logfile 
-            $location/vmnet-dhcpd -cf /etc/vmware/dhcpd-vmnet8.conf \\
-              -lf /var/run/vmware/dhcpd-vmnet8.leases \\
-              -pf /var/run/vmnet-dhcpd-vmnet8.pid vmnet8 2>/dev/null # or logfile 
-          fi
-        }
-        # initialize the lsb status messages
-        . /lib/lsb/init-functions
-
-        case \$1 in
-          start)
-            log_daemon_msg "Starting vmware background services ..." "vmware"
-            # include default directories
-            . /etc/opt/openslx/openslx.conf
-            # load the configuration file
-            . \${OPENSLX_DEFAULT_CONFDIR}/plugins/vmware/vmware.conf
-            mkdir -p /var/run/vmware
-            touch /var/run/vmware/dhcpd-vmnet1.leases
-            touch /var/run/vmware/dhcpd-vmnet8.leases
-            load_modules || log_warning_msg "The loading of vmware modules failed"
-            setup_vmnet0 || log_warning_msg "Problems setting up vmnet0 interface"
-            setup_vmnet1 || log_warning_msg "Problems setting up vmnet1 interface"
-            setup_vmnet8 || log_warning_msg "Problems setting up vmnet8 interface"
-            log_end_msg $?
-          ;;
-          stop)
-            # message output should match the given vendor-os
-            log_daemon_msg "Stopping vmware background services ..." "vmware"
-            killall vmnet-netifup vmnet-natd vmnet-bridge vmware vmplayer \\
-              vmware-tray vmnet-dhcpd 2>/dev/null
-            # wait for shutting down of interfaces. vmnet needs kinda
-            # long
-            sleep 1
-            unload_modules
-            log_end_msg $?
-          ;;
-          # we don't need a status yet... at least as long as it is
-          # unclear in which path the corresponding binary (see original
-          # /etc/init.d/vmware) is in our case
-          #status)
-          #  log_daemon_msg "Say something useful here ..."
-          #;;
-          restart)
-            \$0 stop
-            \$0 start
-            exit $?
-          ;;
-          *)
-           log_success_msg "Usage: \$0 {start|stop|restart}"
-            exit 2
-          ;;
-        esac
-        exit 0
-        End-of-Here
-    return $script;
-}
-
-1;