remove uClibc stuff - part I

4 files changed, 0 insertions, 1528 deletions

diff --git a/src/initramfs/stage3-stuff/etc/functions b/src/initramfs/stage3-stuff/etc/functions
deleted file mode 100644
index 066d2756..00000000
--- a/src/initramfs/stage3-stuff/etc/functions
+++ /dev/null
@@ -1,1034 +0,0 @@
-# Copyright (c) 2003..2006 - RZ Uni Freiburg
-# Copyright (c) 2006..2009 - OpenSLX GmbH
-#
-# This program/file is free software distributed under the GPL version 2.
-# See http://openslx.org/COPYING
-#
-# If you have any feedback please consult http://openslx.org/feedback and
-# send your feedback to feedback@openslx.org
-#
-# General information about OpenSLX can be found at http://openslx.org
-#
-# Common functions file for the configuration of linux diskless clients
-# (included by init, hwautocfg, servconfig, ... within OpenSLX initialramfs)
-
-#############################################################################
-# set of empty dummy functions (loaded before real functions in the
-# distro specific files - to have no undeclared function in init, serv-
-# config, hwautocfg, ...)
-
-# distro specific funtion called at the beginning of init script
-preinit () {
-:
-}
-# distro specific funtion called at the end of init script
-postinit () {
-:
-}
-# distro specific general function called from servconfig script
-config_distro () {
-:
-}
-# setup netconsole
-config_netconsole () {
-:
-}
-
-#############################################################################
-# produce error message and if $2 is empty run (debug) shell
-error () {
-local e_msg="$1"
-# set LOGFILE if not defined
-[ -z "${LOGFILE}" ] && LOGFILE="/dev/null"
-# if nonfatal error else fatal error message and shell
-if [ -n "$2" ] ; then
-  [ "$DEBUGLEVEL" -ge 1 -a "$DEBUGLEVEL" != 8 ] && \
-    echo -e "${error_msg}${e_msg}${error_nfe}" >> ${LOGFILE}
-  [ "$DEBUGLEVEL" -gt 1 -a "$DEBUGLEVEL" != 8 ] && \
-    echo -e "${error_msg}${e_msg}${error_nfe}"
-  [ "$DEBUGLEVEL" -gt 2 -a "$DEBUGLEVEL" != 8 ] && usleep 10
-else
-  echo -e "${error_msg}${e_msg}${error_shell}"
-  /bin/sh
-  echo -n "Reboot now? [y] (nothing happens here at the moment)"
-  exec < /dev/console > /dev/console
-  #input="y"
-  #read input
-  #[ -z "$input" -o "$input" = "y" -o "$input" = "Y" ] && {
-  #  sleep 4
-  #  [ -f /proc/sysrq-trigger ] || mount -t proc none /proc
-  #  echo "b" > /proc/sysrq-trigger
-  #}
-fi
-}
-#############################################################################
-# system uptime for performance analysis
-sysup () {
-uptime=$(sed -e "s, .*,," /proc/uptime)
-echo "${uptime} s."
-# if start times are kept, a summary of runtimes would be possible too
-}
-#############################################################################
-# (re)generate dynamic linked libraries cache from /etc/ld.so.conf
-ldcfg () {
-[ -n "${ldsc}" ] && echo -e "$init_ldcfg" && ldconfig /tmp/ld.so.cache &
-}
-#############################################################################
-# URI interpreter $1 variable to interprete, $2 type of token to return
-# prot: tftp, http, nbd, ... server: IP or FQDN
-uri_token () {
-local var=$1
-local prot
-local rest
-local server
-local path
-local port
-local tmpval
-local query=""
-# first check if URI starts with prot:// - URI scheme
-if strinstr "://" "$1" ; then
-  prot=${var%://*}
-  rest=${var#*://}
-else
-  rest="$var"
-  prot=""
-fi
-# remove temporary '::' from path, since it conflicts with port specification
-# ticket #232
-if strinstr "::" "$rest" ; then
-  rest=$(echo $rest | sed -e 's,::,§§§§§,g')
-elif strinstr "\:\:" "$rest" ; then
-  rest=$(echo $rest | sed -e 's,\:\:,§§§§§,g')
-fi
-# get the server IP or name and port - URI authority
-# you get the path or other token without leading "/" - add it later if
-# needed (fixme: port might be broken)
-if strinstr ":" "$rest" ; then
-  server="${rest%:*}"
-  rest="${rest#*:}"
-  path="${rest#*/}"
-  port="${rest%/$path}"
-else
-  tmpval=$rest
-  rest="${rest#*/}"
-  server="$(echo $tmpval|sed 's,/.*,,')"
-  path="${tmpval#${server}}"
-  port=""
-fi
-# get path and query components - URI path, query
-if strinstr "\?" "$rest" ; then
-  path="${path%\?*}"
-  query="${rest#*\?}"
-fi
-# return the requested token
-case "$2" in
-  prot) echo "$prot" ;;
-  server) echo "$server" ;;
-  # add '::' again to path, remove duplicate "//"
-  path) echo "$path" | sed -e 's,§§§§§,\:\:,g;s,//,/,' ;;
-  port) echo "$port" ;;
-  query) echo "$query" ;;
-esac
-}
-#############################################################################
-# mounter for different file sources
-fsmount () {
-local proto=$1
-local server=$2
-local srcpath=$3
-local target=$4
-local mntopt=$5
-local transport
-testmkd ${target}
-case "${proto}" in
-  *nbd)
-    # TODO: to be filled in ...
-  ;;
-  lbdev)
-    # we expect the stuff on toplevel directory, filesystem type should be
-    # autodetected here ... (vmimgserv is blockdev here)
-    vmbdev=/dev/${server}
-    waitfor ${vmbdev} 20000
-    mount -o ro ${vmbdev} ${target} || error "$scfg_evmlm" nonfatal
-  ;;
-  nfs)
-    # we expect nfs mounts here ... check that nfs module is loaded before
-    cat /proc/filesystems | grep -q -E "[[:space:]]nfs" || \
-      { modprobe ${MODPRV} nfs 2>/dev/null || error "$error_nfsmod" nonfatal; }
-    for transport in tcp udp fail; do
-      [ $transport = "fail" ] && { error "$init_nfs" nonfatal;
-         noimg=yes; break;}
-       mount -n -t nfs -o ${mntopt},nolock,${transport} \
-         ${server}:${srcpath} ${target} && break
-    done
-  ;;
-  smb|cifs)
-    # cifs mounts might be problematic if accessed with superuser id
-    mount -n -o ${mntopt},user=guest,guest,file_mode=0755,dir_mode=0755 \
-      -t ${proto} //${server}${srcpath} ${target}
-    #d_mkrlscript entry boot.slx "/opt/openslx/uclib-rootfs/bin/mount -n \
-    #-o ${mntopt},guest,user=guest,file_mode=0755,dir_mode=0755 -t ${proto} \
-    #//${server}${srcpath} ${target#/mnt}"
-  ;;
-esac
-}
-#############################################################################
-# replace @@@serverip@@@ with real serverip. Allows the usage of a variable
-# for the server ip address (e.g. in machine-setup or kernel commandline)
-checkip ()
-{
-if [ "@@@serverip@@@" = "$1" -a -n "$serverip" ] ; then
-  echo $serverip
-else
-  echo $1
-fi
-}
-#############################################################################
-# replacement for which command to find executables inside stage4 rootfs
-binfinder()
-{
-local program="$1"
-local s4path
-local notfound=1
-for s4path in bin sbin usr/bin usr/sbin usr/local/bin \
-              usr/local/sbin usr/bin/X11; do
-  if [ -f "/mnt/$s4path/$program" ] && \
-     [ -x "/mnt/$s4path/$program" ]; then
-    printf '%s\n' "/$s4path/$program"
-    notfound=0
-    break
-  fi
-done
-return $notfound
-}
-#############################################################################
-# disk formatter and mounter. some proper error message output should be
-# added. It uses programs invoked from stage 4 root filesystem. First
-# argument is blockdev or file to be formatted, second mountpoint if not
-# /mnt/tmp (default)
-diskfm () {
-local target=$1
-local mntpnt=$2
-local fs
-local path
-[ -f /lib/ld-linux.so.2 ] || ln -s /mnt/lib/ld-linux.so.2 /lib/ld-linux.so.2
-for fs in xfs reiserfs ext2 ; do
-  if strinfile "$fs" /proc/filesystems || modprobe ${MODPRV} $fs ; then
-    unset $found
-    for path in /sbin /bin /usr/sbin /usr/bin ; do
-      if test -x /mnt/$path/mkfs.$fs ; then
-        found=yes
-        case mkfs.$fs in
-          mkfs.xfs)
-            fopt="-f"
-            mopt="-o noexec"
-          ;;
-          mkfs.ext2)
-            fopt="-Fq"
-            mopt="-o nocheck,noexec"
-          ;;
-          mkfs.reiserfs)
-            fopt="-f"
-            mopt="-o noexec"
-          ;;
-        esac
-        LD_LIBRARY_PATH=/mnt/lib /mnt/$path/mkfs.$fs $fopt $target \
-          >/dev/null 2>&1 #|| error
-        if [ -z $mntpnt ] ; then
-          umount /mnt/tmp 2>/dev/null
-          if mount -t $fs -n $mopt $target /mnt/tmp 2>/dev/null; then
-            return 0
-          else
-            mount -n -t tmpfs none /mnt/tmp
-          fi
-        else
-          testmkd $mntpnt
-          mount -t $fs -n -o loop $target $mntpnt 2>/dev/null
-          return 0
-        fi
-      fi
-    done
-    [ -z $found ] && continue
-  else break
-  fi
-done
-}
-
-#############################################################################
-# dhcp client function
-rundhcp ()
-{
-local vci="$1"
-# ensure the interface is up - might produce conflicts - nbd could fail!!
-# fixme: really needed?
-#  [ -n "$noipyet" ] && ip link set dev $nwif up
-[ -f /lib/modules/${KERNEL}/kernel/net/packet/af_packet.ko ] && \
-  modprobe ${MODPRV} af_packet   
-echo "Starting udhcpc for IP configuration"
-mkdir /var/lib/dhcp >/dev/null 2>&1
-[ -n $vci ] && vci="-V $vci"
-testmkd /usr/share/udhcpc
-ln -sf /bin/dhcpmkconfig /usr/share/udhcpc/default.script
-# see for options.c file in udhcp subdir of busybox for accepted "-O option"
-udhcpc -O nissrv -O nisdomain -t 8 -q $vci \
-  -s /usr/share/udhcpc/default.script -i $nwif 2>/dev/null
-}
-
-#############################################################################
-# function for retrieving configuration file (machine-setup) via tftp from a
-# predefined server or given source (file=tftp-server:/path via kernel
-# command line)
-unpack () {
-# $1 is  config file name to get, $2 IP of server to get file from
-local dst=$1
-if [ -s $dst ] ; then
-  # fixme: handle different types of packaging (gzip/bzip2)??
-  if ! tar -xpzf $dst 2> /tmp/ConfTGZ-tar-error ; then
-     cat /tmp/ConfTGZ-tar-error
-     error "$unpack_ConfTGZ" nonfatal
-     rm /tmp/ConfTGZ-tar-error
-  fi
-  [ "$DEBUGLEVEL" -le 2 -o "$DEBUGLEVEL" -eq 8  ] && rm $dst
-  return 0
-else
-  return 1
-fi
-}
-
-# tftp wrapper
-# usage tftp_get <path> <tftpdserver> [count]
-# count is optional - default is 3 - use -1 for indefinit 
-tftp_get () {
-  local file="$1"
-  local file_server="$2"
-  local download_successful=0
-  local countdown="$3"
-
-  if [ -z "$1" -o -z "$2" ]; then
-    [ $DEBUGLEVEL -ge 1 ] && \
-      echo "[tftp_get] Usage: tftp_get <path> <server> [count]" 
-    return 1;
-  fi
-
-  [ "$countdown" = "" ] && countdown=3
-
-  until [ $download_successful -eq 1 ]
-  do
-    if [ "$countdown" = "0" ]; then
-      [ $DEBUGLEVEL -ge 1 ] && \
-        echo "[tftp_get] download of \"$file\" from \"$file_server\" ... failed"
-      return 0;
-    fi
-    tftp -g -r $file -l /tmp/$(basename $file) $file_server
-    [ -s /tmp/$(basename $file) ] && download_successful=1
-    countdown=$(expr $countdown - 1)
-    usleep 200000
-  done
-  [ $DEBUGLEVEL -ge 1 ] && \
-    echo "[tftp_get] download of \"$file\" from \"$file_server\" ... successful"
-  return 0;
-}
-
-
-# wget wrapper
-# usage wget_get <path> <ftp/httpserver> [count]
-# count is optional - default is 3 - use -1 for indefinit 
-wget_get () {
-  local file="$1"
-  local file_server="$2"
-  local download_successful=0
-  local countdown="$3"
-
-  if [ -z "$1" -o -z "$2" ]; then
-    [ $DEBUGLEVEL -ge 1 ] && \
-      echo "[wget_get] Usage: wget_get <path> <server> [count]" 
-    return 1;
-  fi
-
-  [ "$countdown" = "" ] && countdown=3
-
-  until [ $download_successful -eq 1 ]
-  do
-    if [ "$countdown" = "0" ]; then
-      [ $DEBUGLEVEL -ge 1 ] && \
-        echo "[wget_get] download of \"$file\" from \"$file_server\" ... failed"
-      return 0;
-    fi
-    wget -q $file_server$file -O /tmp/$(basename $file)
-    [ -s /tmp/$(basename $file) ] && download_successful=1
-    countdown=$(expr $countdown - 1)
-    usleep 200000
-  done
-  [ $DEBUGLEVEL -ge 1 ] && \
-    echo "[wget_get] download of \"$file\" from \"$file_server\" ... successful"
-  return 0;
-}
-
-
-fileget () {
-# normally tftp would be used, alternatively use wget for ftp or http
-# if local device file is specified - mount and unmount after copying
-local cfgfile
-[ "x$fileprot" = "x" ] && fileprot=tftp
-if [ "x$filepath" != "x" ] ; then
-  cfgfile=${filepath}
-  [ "x$fileserv" = "x" ] && fileserv=$(checkip ${serverip})
-  # wait for dns if "fileserv" is a name and not lbd device
-  [ "$fileprot" != "lbd" ] && \
-    echo ${fileserv} | grep -qi [a-z] && waitfor /tmp/dhcp-done 10000
-  [ $DEBUGLEVEL -ge 1 ] && echo "fileget -  fileprot:$fileprot, filepath:\
-$filepath, fileserv:$fileserv" >>$LOGFILE
-  case "$fileprot" in
-   ftp|http)
-     wget_get $cfgfile $fileprot://$fileserv \
-      && { unpack /tmp/$(basename $cfgfile) && break; } 2>>$LOGFILE 
-   ;;
-   lbd)
-     local ldev=$fileserv
-     echo "Waiting for configuration file ${cfgfile} ...."
-     [ $DEBUGLEVEL -ge 1 ] && echo "fileget -  fileprot:$fileprot, filepath:\
-$filepath, fileserv:$fileserv" >>$LOGFILE
-     waitfor /mnt/${cfgfile} 10000
-     if [ -f /mnt/${cfgfile} ]; then
-       unpack /mnt/$cfgfile
-     else
-       error "$init_errlfg"
-     fi
-   ;;
-   *)
-     tftp_get $cfgfile $fileserv  \
-       && unpack /tmp/$(basename $cfgfile) 2>>$LOGFILE
-   ;;
-   esac
-else
-  # predefined value for OpenSLX environment; it is expected that this
-  # directory is just below the tftpboot (path to which the daemon is
-  # restricted to)
-  filepath="client-config"
-  [ "x$fileserv" = "x" ] && fileserv=$(checkip ${serverip})
-  [ $DEBUGLEVEL -ge 1 ] && echo "fileget - fileprot:$fileprot, filepath:\
-$filepath, fileserv:$fileserv" >>$LOGFILE
-  # try to get configuration files successively; start with distro client
-  # and try last distro default ...
-  mac=$(echo $macaddr|sed "s/:/-/g")
-  for cfgfile in ${filepath}/${SYSTEM_NAME}/01-$mac.tgz \
-                 ${filepath}/${SYSTEM_NAME}/default.tgz ; do
-    case "$fileprot" in
-      ftp|http)
-        wget $fileprot://$fileserv/$cfgfile -O /tmp/$(basename $cfgfile) \
-          2>>$LOGFILE && { unpack /tmp/$(basename $cfgfile) && break; }
-      ;;
-      tftp)
-        tftp_get $cfgfile $fileserv \
-          2>>$LOGFILE && { unpack /tmp/$(basename $cfgfile) && break; }
-      ;;
-    esac
-  done
-  echo -e "\n## Configuration via fileget from ${fileprot}://${fileserv}/\
-${cfgfile}\n# Hierarchy is distro client and as last distro/default" \
-    >>/tmp/confviafile
-fi
-cat /initramfs/machine-setup >>/tmp/confviafile 2>/dev/null || \
-  error "$nomachsetup"
-echo "fileget via $fileprot from $fileserv/$cfgfile finished" >/tmp/file-done
-[ $DEBUGLEVEL -ge 1 ] && echo "fileget from $cfgfile finished" >>$LOGFILE
-}
-
-#############################################################################
-# function for creating directories after testing of their existance avoids
-# to recreate directories in union mounts. If second and/or third parameters
-# are given check for permission patterns
-testmkd () {
-  test -d $1 || mkdir -p $1 >/dev/null 2>&1
-  [ $# -ge 2 ] && for i in "$2" "$3" ; do
-    echo "$i" | grep -q -E "^[0-9]{3,4}$" && chmod "$i" $1 >/dev/null 2>&1
-    echo "$i" | grep -q -E ":." && chown "$i" $1 >/dev/null 2>&1
-  done
-}
-
-#############################################################################
-# function for writing a syslog-ng.conf file. First parameter is absolute
-# destination (incl. /mnt prefix)
-# sysngwriter $dest $start_syslog
-sysngwriter () {
-local mysyslogngcfg=$1
-# logging servers might be specified in $log_servers (from e.g. dhcp)
-# fixme!? only first logserver from dhcp variable is used
-[ -n "$log_servers" ] && start_syslog="syslog://${log_servers% *}:514/udp"
-echo -e "# File written by $0 within InitRamFS\n\
-source src {\n\tfile(\"/proc/kmsg\");\n\
-\tunix-dgram(\"/dev/log\");\n\tinternal();\n};\ndestination console_all {\
-\n\tfile(\"/dev/tty10\");\n};" >$mysyslogngcfg
-case "$start_syslog" in
-  yes|Yes|YES)
-    echo -e "\nlog {\n\tsource(src);\n\tdestination(console_all);\n};" \
-      >>$mysyslogngcfg
-  ;;
-  file)
-    echo -e "destination allmessages {\n\tfile(\"/var/log/allmessages\");\n};\
-\nlog {\n\tsource(src); destination(allmessages);\n};" >>$mysyslogngcfg
-  ;;
-  *)
-    syslogsrv=$(uri_token $start_syslog server)
-    syslogport=$(uri_token $start_syslog port)
-    syslogprot=$(uri_token $start_syslog path)
-    [ -z ${syslogport} ] && syslogport=514
-    [ -z ${syslogprot} ] && syslogprot=udp
-    echo -e "destination loghost {\n\t${syslogprot}(\"${syslogsrv}\" \
-port(${syslogport}));\n};\nlog {\n\tsource(src);\n\tdestination(loghost);\n};"\
-      >>$mysyslogngcfg
-  ;;
-esac
-}
-
-#############################################################################
-# simple string in string search
-strinstr () {
-  case "$2" in *$1*) return 0;; esac
-  return 1
-}
-
-#############################################################################
-# simple string in file search, for the future grep should be used instead
-strinfile () {
-  case "$(cat $2)" in *$1*) return 0;; esac
-  return 1
-}
-
-#############################################################################
-# wait for a file to appear and stop after maxwait counts
-waitfor () {
-local file=$1
-local maxwait=$2
-local count=0
-[ -z $file ] && return 0
-[ -z $maxwait ] && maxwait=5000
-while [ ! -e $file ] ; do
-  usleep 1000 
-  count=$(($count + 1))
-  [ $count -gt $maxwait ] && return 1
-done
-return 0
-}
-
-#############################################################################
-# ldconfig is needed if rootfilesystem is composed of several parts. Search
-# for ldconfig and execute it (we expect ldconfig not to be a dynamically 
-# linked tool)
-# check that /mnt/etc/ld.so.conf is never lost
-ldconfig () {
-local cachefile="$1"
-for ldcfg in /mnt/sbin/ldconfig \
-             /mnt/bin/ldconfig \
-             /mnt/usr/sbin/ldconfig; do
-  test -x $ldcfg && {
-    $ldcfg -r /mnt -C $cachefile; break; }
-done
-echo "finished at $(sysup)" >/tmp/ldcfg
-}
-
-#############################################################################
-# base passwd/shadow, the standard user present in every system. All other
-# system users should be generated within the service function
-basepasswd () {
-# hack (see Ticket #206)
-root_pw="$1"
-# strip every line with userid between 500 and 99999 from the passwd
-# file
-sed '/^[a-zA-Z0-9]*:[a-zA-Z0-9]*:[1-9][0-9]\{3,4\}:/d;/^+:*/d;/^+$/d;
-  /^[a-zA-Z0-9]*:[a-zA-Z0-9]*:[5-9][0-9]\{2\}:/d' /mnt/etc/passwd \
-  >/tmp/newpasswd
-# and add user nobody again (is there a more elegant way?)
-sed -n -e '/nobody/p' /mnt/etc/passwd >>/tmp/newpasswd
-# create the shadow from passwd file
-echo -e "root:"${root_pw}":12958:0:10000::::" >/mnt/etc/shadow
-sed 's/:.*/:!:13078:0:99999:7:::/;/^root.*/d' /tmp/newpasswd \
-  >>/mnt/etc/shadow
-mv /tmp/newpasswd /mnt/etc/passwd
-chmod 0640 /mnt/etc/shadow
-}
-
-#############################################################################
-# wait for the completion of configuration file (machine-setup). It is
-# composed from different sources
-cfgcomplete () {
-waitfor /tmp/dhcp-done 10000 || error "$error_errdcfg" nonfatal
-waitfor /tmp/file-done 10000 || error "$error_errfcfg" nonfatal
-waitfor /tmp/ldap-done 10000 || error "$error_errlcfg" nonfatal
-# concatenate the different files now into the central config file, order
-# matters - ldap (not implemented yet) data has highest priority
-if ! test -f /tmp/cfgcomplete ; then
-  echo "## Stage3 configuration via initial/early /etc/initramfs-setup" \
-    >/etc/ext-initramfs-setup
-  for config in /etc/initramfs-setup /tmp/confviadhcp /tmp/confviafile \
-  	        /tmp/confvialdap
-    do test -f $config && cat $config >>/etc/ext-initramfs-setup
-  done
-# check again and replace @@@serverip@@@ and produce a final version for
-# stage4 (no much use, just debugging)
-sed "s,@@@serverip@@@,$serverip," -i /etc/ext-initramfs-setup
-. /etc/ext-initramfs-setup
-cp /etc/ext-initramfs-setup /mnt/etc/machine-setup
-mv /etc/ext-initramfs-setup /etc/initramfs-setup
-echo "config completed" >/tmp/cfgcomplete
-fi
-}
-
-#############################################################################
-# execute all shell scripts in the given init-hook folder
-runinithook () {
-local hook=$1
-echo "[openslx] run: $hook" > /dev/kmsg
-if [ -d /etc/init-hooks/$hook ]; then
-  for hook_script in /etc/init-hooks/$hook/*.sh; do
-    if [ -e $hook_script ]; then
-      /bin/init-wrapper $hook_script $DEBUGLEVEL
-      . /tmp/env/wrapper.env
-    fi
-  done
-fi
-}
-
-#############################################################################
-# localization simply derived from $language variable set in machine-setup or
-# other sources - mostly taken from knoppix
-localization () {
-country="$1"
-CONSOLE_FONT="lat9w-16.psfu"
-case "$country" in
-  # German version
-  de*)
-    COUNTRY="de"
-    LANG="de_DE.UTF-8"
-    KEYTABLE="de-latin1-nodeadkeys"
-    XKEYBOARD="de"
-    KDEKEYBOARD="de"
-    CHARSET="utf8"
-    KDEKEYBOARDS="us,fr"
-    TZ="Europe/Berlin"
-  ;;
-  # Belgian version
-  be*)
-    COUNTRY="be"
-    LANG="C"
-    KEYTABLE="be2-latin1"
-    XKEYBOARD="be"
-    KDEKEYBOARD="be"
-    CHARSET="iso8859-15"
-    KDEKEYBOARDS="us,de,fr"
-    TZ="Europe/Brussels"
-  ;;
-  # Bulgarian version
-  bg*)
-    COUNTRY="bg"
-    LANG="bg_BG"
-    KEYTABLE="bg"
-    XKEYBOARD="bg"
-    KDEKEYBOARD="bg"
-    CHARSET="microsoft-cp1251"
-    KDEKEYBOARDS="us,de,fr"
-    TZ="Europe/Sofia"
-  ;;
-  # Switzerland (basically de with some modifications)
-  ch)
-    LANGUAGE="de"
-    COUNTRY="ch"
-    LANG="de_CH"
-    KEYTABLE="sg-latin1"
-    XKEYBOARD="de_CH"
-    KDEKEYBOARD="de_CH"
-    CHARSET="iso8859-15"
-    KDEKEYBOARDS="de,us,fr"
-    TZ="Europe/Zurich"
-  ;;
-  # Simplified Chinese
-  cn)
-    COUNTRY="cn"
-    LANG="zh_CN.GB2312"
-    KEYTABLE="us"
-    XKEYBOARD="us"
-    KDEKEYBOARD="us"
-    CHARSET="gb2312.1980-0"
-    KDEKEYBOARDS="us,de,fr"
-    XMODIFIERS="@im=Chinput"
-    TZ="Asia/Shanghai"
-  ;;
-  # Czechoslovakia
-  cs|cz)
-    LANGUAGE="cs"
-    COUNTRY="cs"
-    LANG="cs_CZ.UTF-8"
-    KEYTABLE="cz-lat2"
-    XKEYBOARD="cs"
-    KDEKEYBOARD="cz"
-    CHARSET="iso8859-2"
-    KDEKEYBOARDS="us,de,fr"
-    TZ="Europe/Prague"
-    CONSOLE_FONT="iso02g"
-  ;;
-  # Denmark
-  dk|da)
-    COUNTRY="dk"
-    LANG="da_DK.UTF-8"
-    # Workaround: "dk" broken in gettext, use da:da_DK
-    LANGUAGE="da:da_DK"
-    KEYTABLE="dk"
-    XKEYBOARD="dk"
-    KDEKEYBOARD="dk"
-    CHARSET="iso8859-15"
-    KDEKEYBOARDS="dk,de,us,fr"
-    TZ="Europe/Copenhagen"
-  ;;
-  es)
-  # Spain
-    COUNTRY="es.UTF-8"
-    LANG="es_ES"
-    KEYTABLE="es"
-    XKEYBOARD="es"
-    KDEKEYBOARD="es"
-    CHARSET="iso8859-15"
-    KDEKEYBOARDS="de,us,fr"
-    TZ="Europe/Madrid"
-  ;;
-  # Finland
-  fi)
-    COUNTRY="fi"
-    LANG="fi_FI.UTF-8"
-    KEYTABLE="fi"
-    XKEYBOARD="fi"
-    KDEKEYBOARD="fi"
-    CHARSET="iso8859-15"
-    KDEKEYBOARDS="us"
-    TZ="Europe/Helsinki"
-  ;;
-  # France
-  fr*)
-    COUNTRY="fr"
-    LANG="fr_FR.UTF-8"
-    KEYTABLE="fr"
-    XKEYBOARD="fr"
-    KDEKEYBOARD="fr"
-    CHARSET="iso8859-15"
-    KDEKEYBOARDS="de,us"
-    TZ="Europe/Paris"
-  ;;
-  he|il)
-  # Hebrew version
-    LANGUAGE="he"
-    COUNTRY="il"
-    LANG="he_IL.UTF-8"
-    KEYTABLE="us"
-    XKEYBOARD="us"
-    KDEKEYBOARD="il"
-    CHARSET="iso8859-8"
-    KDEKEYBOARDS="us,fr,de"
-    TZ="Asia/Jerusalem"
-  ;;
-  # Ireland
-  ie)
-    COUNTRY="ie"
-    LANG="en_IE.UTF-8"
-    KEYTABLE="uk"
-    XKEYBOARD="uk"
-    KDEKEYBOARD="gb"
-    CHARSET="iso8859-15"
-    KDEKEYBOARDS="us,de,es,fr,it"
-    TZ="Europe/Dublin"
-  ;;
-  # Italy
-  it)
-    COUNTRY="it"
-    LANG="it_IT.UTF-8"
-    KEYTABLE="it"
-    XKEYBOARD="it"
-    KDEKEYBOARD="it"
-    CHARSET="iso8859-15"
-    KDEKEYBOARDS="fr,us,de"
-    TZ="Europe/Rome"
-  ;;
-  # Japan
-  ja)
-    COUNTRY="jp"
-    LANG="ja_JP.UTF-8"
-    LANGUAGE="ja"
-    KEYTABLE="us"
-    XKEYBOARD="us"
-    KDEKEYBOARD="us"
-    CHARSET="iso8859-15"
-    KDEKEYBOARDS="fr,us,de"
-    TZ="Asia/Tokyo"
-  ;;
-  # The Netherlands
-  nl)
-    COUNTRY="nl"
-    LANG="nl_NL.UTF-8"
-    KEYTABLE="us"
-    XKEYBOARD="us"
-    KDEKEYBOARD="en_US"
-    CHARSET="iso8859-15"
-    KDEKEYBOARDS="nl,de,fr"
-    TZ="Europe/Amsterdam"
-  ;;
-  # Poland
-  pl)
-    COUNTRY="pl"
-    LANG="pl_PL.UTF-8"
-    KEYTABLE="pl"
-    XKEYBOARD="pl"
-    KDEKEYBOARD="pl"
-    CHARSET="iso8859-2"
-    KDEKEYBOARDS="de,us,fr"
-    TZ="Europe/Warsaw"
-    CONSOLE_FONT="iso02g"
-  ;;
-  # Russia
-  ru)
-    COUNTRY="ru"
-    LANG="ru_RU.UTF-8"
-    KEYTABLE="ru"
-    XKEYBOARD="ru"
-    KDEKEYBOARD="ru"
-    CHARSET="koi8-r"
-    CONSOLE_FONT="Cyr_a8x16"
-    KDEKEYBOARDS="de,us,fr"
-    TZ="Europe/Moscow"
-  ;;
-  # Slovakia
-  sk)
-    COUNTRY="sk"
-    LANG="sk_SK.UTF-8"
-    KEYTABLE="sk-qwerty"
-    XKEYBOARD="sk"
-    KDEKEYBOARD="sk"
-    CHARSET="iso8859-2"
-    KDEKEYBOARDS="us,de"
-    TZ="Europe/Bratislava"
-    CONSOLE_FONT="iso02g"
-  ;;
-  # Slovenia
-  sl)
-    LANGUAGE="sl"
-    COUNTRY="si"
-    LANG="sl_SI.UTF-8"
-    KEYTABLE="slovene"
-    XKEYBOARD="sl"
-    KDEKEYBOARD="si"
-    CHARSET="iso8859-2"
-    KDEKEYBOARDS="us,de"
-    TZ="Europe/Ljubljana"
-    CONSOLE_FONT="iso02g"
-  ;;
-  tr)
-# Turkish version (guessed)
-    COUNTRY="tr"
-    LANG="tr_TR.UTF-8"
-    KEYTABLE="tr_q-latin5"
-    XKEYBOARD="tr"
-    KDEKEYBOARD="tr"
-    CHARSET="iso8859-9"
-    KDEKEYBOARDS="us,de,fr"
-    TZ="Europe/Istanbul"
-  ;;
-  # Taiwan - Traditional Chinese version
-  tw)
-    COUNTRY="tw"
-    LANG="zh_TW.UTF-8"
-    LANGUAGE="zh_TW.Big5"
-    KEYTABLE="us"
-    XKEYBOARD="us"
-    KDEKEYBOARD="us"
-    CHARSET="iso8859-1"
-    KDEKEYBOARDS="us"
-    XMODIFIERS="@im=xcin"
-    TZ="Asia/Taipei"
-  ;;
-  # Great Britian
-  uk)
-    COUNTRY="uk"
-    LANG="en_GB.UTF-8"
-    LANGUAGE="en"
-    KEYTABLE="uk"
-    XKEYBOARD="uk"
-    KDEKEYBOARD="gb"
-    CHARSET="iso8859-1"
-    KDEKEYBOARDS="us"
-    TZ="Europe/London"
-  ;;
-  # US and default configuration
-  *)
-    LANGUAGE="us"
-    COUNTRY="us"
-    LANG="C"
-    KEYTABLE="us"
-    XKEYBOARD="us"
-    KDEKEYBOARD="us"
-    CHARSET="iso8859-1"
-    KDEKEYBOARDS="de,fr"
-    TZ="America/New_York"
-  ;;
-esac
-}
-
-#############################################################################
-# This function gets an uri or a comma separated list of uris as parameter.
-# It will then try to mount these uris and add them to the union at /
-include_in_fsroot_union () {
-  union_id=0 # used to have guarantee differing names for the unions mount point
-  union_type=$1
-  for ROOTFS in $(echo $2 |sed 's/,/ /g'); do
-    union_id=$(($union_id + 1))
-    srvproto=$(uri_token $ROOTFS prot)
-    case $srvproto in
-      nfs)
-        # activate kernel nfs if not present, nfsroot consists now of two
-        # different parts
-        root_path=$(uri_token $ROOTFS path)
-        nfsserver=$(uri_token $ROOTFS server)
-        mkdir -p /mnt/tmp/${root_path}_${union_id}
-        for proto in tcp udp fail; do
-          [ $proto = "fail" ] && { error "$scfg_nfs"; break; }
-          mount -n -t nfs -o ro,nolock,$proto $nfsserver:$root_path \
-            /mnt/tmp/${root_path}_${union_id} && break
-        done
-      ;;
-      *nbd)
-	echo "Not working yet"
-        nbdmod=$srvproto
-        # get settings for nbd-client, filesystem equals to path in URI
-        # notation
-        nbdhost=$(uri_token $ROOTFS server)
-        nbdport=$(uri_token $ROOTFS port)
-        nbdrfst=$(uri_token $ROOTFS path)
-        echo -e "(D)NBD $ROOTFS parsed to $srvproto - $nbdhost - \
-          $nbdport - $nbdrfst" >> /tmp/testlog
-        #FIXME: do mount
-      ;;
-      aoe)
-        echo "Not implemented yet"
-      ;;
-      iscsi)
-        echo "Not implemented yet"
-        #iscsiserver=$(uri_token $ROOTFS server)
-        #iscsiport=$(uri_token $ROOTFS port)
-        #iscsitarget=$(uri_token $ROOTFS path)
-      ;;
-    esac
-    if [ "X$union_type" == "XUnionFS" ]; then
-      [ "$DEBUGLEVEL" -gt 2 -a "$DEBUGLEVEL" != 8 ] && \
-        echo "Using unionctl to mount ${root_path}_${union_id} (type: \
-          $union_type)"
-      unionctl /mnt/ --add --after 1 --mode ro /mnt/tmp/${root_path}_${union_id}
-    elif [ "X$union_type" == "XAUFS" ]; then
-      # unionctl for aufs is a sh script needing tools not included in our
-      # initramfs
-      [ "$DEBUGLEVEL" -gt 2 -a "$DEBUGLEVEL" != 8 ] && \
-        echo "Using aufs-mount to mount ${root_path}_${union_id} (type: $union_type)"
-      mount -n -o remount,add:1:/mnt/tmp/${root_path}_${union_id}=ro none /mnt
-    else
-      error ${init_loadunions} nonfatal
-    fi
-  done
-}
-
-#############################################################################
-# dummy functions - avoid undefined functions in servconfig (functions are
-# normally overwritten by settings within distro-functions) - a file 
-# generated by mkdxsinitrd from <distro>/functions-default & ~-version
-
-# setup initial boot scripts (for most standard distributions, gentoo is to
-# be handled differently)
-initial_boot () {
-:
-}
-# function for udev configuration
-config_udev () {
-:
-}
-# function for ntp configuration
-config_ntp () {
-:
-}
-# function for afs
-config_afs () {
-:
-}
-# function for atd
-config_atd () {
-:
-}
-# function for configuration of cron services
-config_cron () {
-:
-}
-# syslog service
-config_syslog () {
-:
-}
-# secure shell service
-config_sshd () {
-:
-}
-# snmp agent for remote monitoring
-config_snmp () {
-:
-}
-# consolefont
-consolefont () {
-:
-}
-# acpi and powersave
-config_acpi () {
-:
-}
-# configure hal, dbus, resmgr and services like that
-config_dreshal () {
-:
-}
-# configure automounter, simple NFSv3 imports only
-config_automount () {
-:
-}
-# configure print services / start requested printer daemon
-config_printer () {
-:
-}
-# configure bluetooth services
-config_bt () {
-:
-}
-# create a compliant runlevel script, needed for boot.slx
-d_mkrlscript () {
-:
-}
-# start name service caching daemon
-config_nscd () {
-:
-}
-# configure automounter
-config_automount () {
-:
-}
-# configure samba service (not winbind, but nmbd, smbd)
-config_samba () {
-:
-}
-# start portmapper (needed at least for nfs and nis services)
-config_portmap () {
-:
-}
-# start nis/ypbind
-config_nis () {
-:
-}
-# configure nfsv4 stuff
-config_nfsv4 () {
-:
-}
-# configure keyboard layout
-keytable () {
-:
-}
-# set up localization like keytable, console
-dlocale () {
-:
-}
diff --git a/src/initramfs/stage3-stuff/etc/ldap-functions b/src/initramfs/stage3-stuff/etc/ldap-functions
deleted file mode 100644
index d2b6753e..00000000
--- a/src/initramfs/stage3-stuff/etc/ldap-functions
+++ /dev/null
@@ -1,75 +0,0 @@
-#######################################################################
-# configuration via ldap
-# get_timeranges: helper function for ldapconf, retrieving timeranges
-# of machineconfig-objects under search base $1 (Host,Group,Default)
-get_timeranges(){
-trquery=`ldapsearch -x -H ldap://$ldapserver -b $1 -D $user -w $pwd -LLL \
-"(objectclass=machineconfig)" Timerange|sed -n '/Tim*/p'|sed 's/TimeRange: /#/'`
-}
-# matching_timerange: helper function for ldapconf to get "most 
-# specific timerange" matching actual time
-matching_timerange(){
-match=0
-lines=$[`echo $trquery | sed 's/#/\n#/g'|wc -l` -1]
-for ((i=0;i<$lines;i++)) ; do
-  timerange[$i]=`echo $trquery | cut -d "#" -f $[$i+2] | sed 's/ //g'`
-done
-while true ; do
-  for ((i=0;i<$lines;i++)) ; do
-    trday=`echo ${timerange[i]} | cut -d "_" -f 1`
-    trbegin=`echo ${timerange[i]} | cut -d "_" -f 2`
-    trend=`echo ${timerange[i]} | cut -d "_" -f 3`
-    if [ $trday == $wday ] && [ $trday != "X" ] && [ $trbegin != "X" ] && \
-        [ $trbegin -le $time ] && [ $time -le $trend ]; then
-      echo $wday $time "[D H H]match ->" ${timerange[i]}
-      tr=${timerange[i]}
-      match=1 && break
-    fi
-  done
-  if [ $match == 1 ] ; then break ; fi
-  for ((i=0;i<$lines;i++)) ; do
-    trday=`echo ${timerange[i]} | cut -d "_" -f 1`
-    trbegin=`echo ${timerange[i]} | cut -d "_" -f 2`
-    trend=`echo ${timerange[i]} | cut -d "_" -f 3`
-    if [ $trday == $wday ] && [ $trbegin == "X" ] && [ $trend == "X" ]; then
-        echo $wday $time "[D _ _]match ->" ${timerange[i]}
-      tr=${timerange[i]}
-      match=1 && break
-    fi
-  done
-  if [ $match == 1 ] ; then break ; fi
-  for ((i=0;i<$lines;i++)) ; do
-    trday=`echo ${timerange[i]} | cut -d "_" -f 1`
-    trbegin=`echo ${timerange[i]} | cut -d "_" -f 2`
-    trend=`echo ${timerange[i]} | cut -d "_" -f 3`
-    if [ $trday == "X" ] && [ $trbegin != "X" ] && [ $trbegin -le $time ] && \
-        [ $time -le $trend ]; then
-      echo $wday $time "[_ H H]match ->" ${timerange[i]}
-      tr=${timerange[i]}
-      match=1 && break
-    else
-      if [ ${timerange[$i]} == "X_X_X" ]; then
-        echo $wday $time "[_ _ _]match ->" ${timerange[i]}
-        tr="X_X_X" && match=1
-      else
-      match=0
-      fi
-    fi
-  done
-  if [ $match == 1 ] || [ $match == 0 ] ; then	break ; fi
-done
-}
-# get_machineconfig: helper function for ldapconf, writing machine
-# config data of one timerange $tr into file "tmp/confvialdap/$tr"
-get_machineconfig(){
-ldapsearch -x -H ldap://$ldapserver -b $1 -D $user -w $pwd -LLL \
-"(&(objectclass=machineconfig)(timerange=$tr))"|sed '/dn:/d'|sed '/ou=/d'|\
-sed '/dc=/d'|sed '/objectC*/d'|sed '/Tim*/d'|sed '/cn:/d'|sed '/desc*/d'|sed \
-'s/: /=/g'|sed 's/-/_/g' > tmp/confvialdap/$tr
-}
-
-ldapconf () {
-local ldapserver=$1
-error "$error_ldapcfg"
-echo "not implemented" > /tmp/ldap-done
-}
diff --git a/src/initramfs/stage3-stuff/etc/messages b/src/initramfs/stage3-stuff/etc/messages
deleted file mode 100644
index ca66245d..00000000
--- a/src/initramfs/stage3-stuff/etc/messages
+++ /dev/null
@@ -1,204 +0,0 @@
-# Copyright (c) 2003 - 2006 - RZ Uni Freiburg
-# Copyright (c) 2006 - 2009 - OpenSLX GmbH
-#
-# This program/file is free software distributed under the GPL version 2.
-# See http://openslx.org/COPYING
-#
-# If you have any feedback please consult http://openslx.org/feedback and
-# send your feedback to feedback@openslx.org
-#
-# General information about OpenSLX can be found at http://openslx.org
-#
-# Messages file for all error and info messages generated during client
-# bootup (within initialramfs) for OpenSLX linux diskless clients version 5.
-# Fhis file contains the standard set of error messages.
-
-# messages from (slx) init
-init_errmsg="The functions file contains a lot of slx scripts \
-functionality. Without this\ninit script will not run."
-init_mff="The main $init_errmsg"
-init_dff="The distro $init_errmsg"
-init_sscf="The slx configuration variables could not be found. Please
-provide the slxconfig file."
-init_noeth="  Unable to configure the ethernet device (eth0). Please check \
-for an\n  appropriate kernel module."
-init_errip="  Unable to setup at \
-least basic functionality, because no IP configuration\n  available. You \
-might pass that information via kernel command line\n  through setting of \
-'ipappend 1' in pxelinux.cfg/* or just enable dhcp\n  or ldap. They are \
-enabled via tokens ('ldap' or 'dhcp') in kernel\n  command line."
-init_errldap="  Unable to setup at \
-least basic functionality, because no IP configuration\n  available. Please \
-beware - ldap works only in combination of either\n  ipappend or similar or \
-with dhcp!"
-init_errnwad="  Failed to load the network adaptor modules added via \
-slxconfig-demuxer\n  run. Please reconfigure the module list and add the \
-appropriate modules\n  without *.ko suffix."
-init_bootmac="  If you have more than one ethernet adaptor present in your \
-machine or using\n  a NVidia chipset then it would be advisable to switch on \
-passing of the\n  boot MAC address via kernel commandline (IPAPPEND=3) in \
-your PXElinux\n  configuration."
-init_nveth="  Your system uses a NVidia ethernet chip which might to fail to \
-get the\n  original MAC address assigned. Use IPAPPEND=3 in your PXElinux \
-configuration\n  to get the boot MAC address passed on."
-init_errdhcp="  Did not get complete IP \
-configuration via DHCP. You may want to add\n  a vendor code identifier \
-via kernel commandline (vci=VCI)."
-init_erripcfg="  Up to now no IP configuration is available. If there is any \
-local file config\n  the system may work locally."
-init_errbld="  Failed to load \
-module ${NBD}.ko. It is needed if you intend to use\n  network block \
-device (D)NBD for the client as root filesystem."
-init_nbdcl="  Failed to start the network block device client. Unable to \
-mount root\n  filesystem."
-init_nbddev="  For some reason the network block device /dev/${NBD}0 never \
-appeared.\n  You might want to check udev or your list of static device \
-files."
-init_dnbd2s="  After 100 retries, it was not possible to start the dnbd2 \
-service. Please\n  check that at least one server is available. You might \
-use the\n  /sys/block/vnbd0 interface for this."
-init_moddir="  The requested modules or firmware directory does not exist. \
-That could mean:\n\
-  * The kernel was updated but the demuxer was not run afterwards.\n\
-  * The mounted filesystem does not contain the modules directory at all.\n\
-  You might want to check the list of mounted filesystems and if /mnt is\n\
-  not empty run 'ls /mnt/lib/modules; ls /mnt/lib/firmware' to check."
-init_loadaufs="  Loading of AUFS and/or UnionFS failed - Either the module(s) \
-are not\n  present or do not match the running kernel. If you do not want to \
-see\n  this message add the token(s) 'noaufs'/'nounionfs' to your kernel \
-command\n  line or remove the modules from your kernel module directory."
-init_loadunions="  Stacking of directories failed, because UnionFS/AUFS is not \
-loaded."
-init_deselau="  You switched off AUFS and UnionFS via kernel commandline, thus \
-no module\n  was loaded, using traditional bind mounts."
-init_loadcow="  Loading of Copy On Write (COW - special block device) module \
-failed -\n  Either module is not present or module does not match the \
-running\n  kernel. If you do not want to see this message remove the token \
-'cowloop' from kernel command line."
-init_cownobld="  Loading of cow module is of no sense if no network/other block \
-device is used or\n  UnionFS/AUFS was specified as read write layer too. Remove \
-UnionFS/AUFS token from\n  kernel commandline if cowloop should be used instead."
-init_nfs="  Mount of root filesystem via NFS was requested via kernel command \
-line\n  but failed. There might be the following reasons for that:\n  \
-* No nfs.ko module could be loaded and no NFS support was present in the\n  \
-running kernel - see error messages above\n  \
-* You tried to mount from wrong server or path ($nfsroot)\n  \
-* No NFS server is running or you do not have permissions"
-init_ldcfg="  Starting ldconfig - normally switched off. Enable it via kernel \
-cmdline option\n  'noldsc'. You might have/want to add additional library \
-pathes to the\n  ld.so.conf file."
-init_errlog="  Unable to create the logfile configuration in \
-/etc/${D_SYSCONFDIR}. That\n  might indicate some severe error."
-init_fstab="  Failed to create /etc/fstab in the clients root filesystem. The\n\
-  noexistence of the file might produce some unexpected behaviour of\n\
-  mount commands."
-init_errldcfg="  For some reason the generation of ld.so.cache did not \
-finish in time."
-init_infldcfg="  You decided not to recreate \
-/etc/ld.so.cache file. That might cause errors\n  if libraries are installed \
-after this file was created on server."
-init_errlfg="  The ConfTGZ filesource was some local device which was not \
-mounted successfully.\n  Either the wrong device was given or the filesystem \
-is not known to the kernel."
-init_errloop="  The loopback mounting of the rootfs container failed. Either \
-the file is\n  not available, unreadable or problems with the filesystem \
-modules."
-init_errcfg="of this client did not finish in\n  time. You might check the \
-process list and list the modules loaded until\n  now."
-init_errhw="  For some reason the hardware autoconfig $init_errcfg"
-init_errxorg="  For some reason no xorg.conf appeared, check xconfig!" 
-init_errsw="  For some reason the software configuration  $init_errcfg"
-init_wait="  Waited $ticks ticks to unmount kernel module or firmware \
-directory ..."
-init_errumnt="  Unmount of the kernel modules directory \
-failed for some reason. Some\n  modprobe process still active!?"
-init_errsys="  Unmount of the kernel sys directory \
-failed for some\nreason.  You will get some error messages that some files \
-could not be\n  removed."
-init_runinit="  Could not execute run-init due to missing command or wrong\n  \
-parameters given."
-init_picfg="  The plugin configuration directory is missing. This could be due \
-to failed\n  config get process at the beginning of stage3 setup. Either \
-requested\n  configuration file is missing in ~/client-config/<system> or a \
-general\n  transmission error."
-
-# messages from functions
-error_msg="An error occured during execution of $0 script:\n\n"
-error_nfe="\n  -> This error is not fatal - continuing ...\n"
-error_shell="\n  -> Running shell for debugging purposes now ...\n"
-error_modload="Failed to load module "
-error_modnfs="needed for mounting rootfs"
-error_nodhcp="  You tried to configure system via dhcp, but no usable dhcp\n\
-  client could be found. Please check that you have some client from\n\
-  the following list installed: dhclient dhcpcd pump ipconfig."
-error_dhcp="  The following problems could produce that error:\n\
-  * The af_packet.ko module is either not loaded nor present in kernel.\n\
-  * No network device is present - either no module matching the hardware\n\
-    was loaded nor present in kernel.\n  You might want to run 'lsmod'."
-error_dhclient="  Fatal error occured while trying to run dhclient.\n\
-$error_dhcp"
-error_ldapcfg="  The configuration via ldap is not implemented yet."
-error_errdcfg="  Did not get any configuration data via dhcp until now ..."
-error_errfcfg="  Did not get any configuration data via tftp until now ..."
-error_errlcfg="  Did not get any configuration data via ldap until now ..."
-unpack_ConfTGZ="  Error during unpacking of the ConfTGZ archive.\nAre you sure \
-it is in proper format?"
-nomachsetup="  No machine-setup file found. You might not have gotten any \
-configuration\n  from your server. You could find that out by checking if \
-/initramfs and\n  /rootfs are present!"
-
-# messages from distro functions
-df_erritab="  The file /etc/inittab does not exist or is no regular one. It \
-is needed\n  for the bootup procedure to follow. If upstart is used instead no \
-inittab\n  is needed any more, but a proper configured events.d."
-df_errumod="    Failed to load the \"unix\" module. Problems with Hardware \
-detection\nwill probably arise."
-df_errserv="seems not to be installed or start script is\n  not available\
-so requesting the start of service make no sense. Please\n  disable service\
-or install the files/packages needed."
-df_errcron="  The cron start script $df_errserv" 
-df_errsysl="  The syslog start script $df_errserv"
-df_errsshd="  The sshd start script $df_errserv"
-df_erryp="  The NIS client $df_errserv"
-df_errpmap="  The portmapper $df_errserv"
-df_erramnt="  Automounter $df_errserv"
-df_errnsc="  Name Service caching deamon $df_errserv\n This service might \
-be useful to take load from a ldap user directory."
-df_errafsd="  No afs directory present."
-df_errafsn="  AFS client service is not available."
-df_errkbd="  No non-english keyboard and console settings are installed. \
-Please add\n  them to your stage1 to have them enabled."
-
-# messages from servconfig
-scfg_nfs="  Mount of some NFS source failed ..."
-scfg_rdate="  Your configured ntpserver does not offer time configuration \
-on port 37."
-scfg_ntptz="  No such timezone data file (needed for ntp time service \
-configuration)."
-scfg_evmlm="  Mounting of local device source for vmware directory failed \
-for some reason."
-scfg_vmdir="  For some reason the runvmware script is not available for \
-copying. That\n  could be the result of failed mount or simply missing \
-file on\n  server."
-scfg_vmchs="  The virtual machines lister/chooser is not available from \
-~/templates\n  directory. Thus no default k/gdm menu entry is created."
-scfg_erradir="  Only one directory level is allowed to hook up automounter \
-to and the\n  directory should exist (on the servers export) or should be \
-creatable\n  (e.g. because of UnionFS writeable root directory)."
-scfg_country="  No configuration for localization found in config file. \
-Using default\n  country setting '${D_DEFAULTCOUNTRY}' defined in $0."
-
-# messages from hwautocfg
-hcfg_hwsetup="  The X server configuration file generated by hwautocfg could \
-not\n  be found."
-gfx_msg="Please check your graphic adaptor settings ($hw_graphic)."
-hw_msg="  Please check your predefined monitor settings ($hw_monitor): \
-Automatic\n  configuration of display"
-hcfg_res="  $hwmsg resolution was attempted but not established. Using \
-default resolutions (defined in xconfig)"
-hcfg_hwsetup="  Expected information from hwsetup to appear in \
-/tmp/hwsetup.info.\n  Unable to configure parts of the systems hardware. \
-Please check that\n  hwsetup is properly installed and executable."
-hcfg_keyb="  No settings found for keyboard, using default of '${XKEYBOARD}' \
-defined\n  in $0."
-
diff --git a/src/initramfs/stage3-stuff/etc/messages.de b/src/initramfs/stage3-stuff/etc/messages.de
deleted file mode 100644
index 487332d7..00000000
--- a/src/initramfs/stage3-stuff/etc/messages.de
+++ /dev/null
@@ -1,215 +0,0 @@
-# Copyright (c) 2003 - 2006 - RZ Uni Freiburg
-# Copyright (c) 2006 - 2010 - OpenSLX GmbH
-#
-# This program/file is free software distributed under the GPL version 2.
-# See http://openslx.org/COPYING
-#
-# If you have any feedback please consult http://openslx.org/feedback and
-# send your feedback to feedback@openslx.org
-#
-# General information about OpenSLX can be found at http://openslx.org
-#
-# Messages file for all error and info messages generated during client
-# bootup (within initialramfs) for OpenSLX linux diskless clients version 5
-# this file could be used for localization of error messages.
-
-# messages from (slx) init / Fehlermeldungen des SLX init
-init_errmsg="  ,,functions''-Datei beinhaltet viele Funktionen \
-der SLX Skripte. Ohne diese\n  wird das Init-Skript nicht funktionieren."
-init_mff="  Die Haupt $init_errmsg"
-init_dff="  Die Distro $init_errmsg"
-init_sscf="  Die SLX Konfigurations-Variablen wurden nicht gefunden. 
-Bitte stellen Sie die\n  SLX Konfigurations-Datei zur Verfuegung."
-init_noeth="  Konnte die Netzwerk-Schnittstelle nicht konfigurieren (eth0).\
- Bitte pruefen,\n  ob das geeignete kernel-Modul vorhanden ist."
-init_errip="  Konnte die Grund-Funktionalitaet nicht einrichten, \
-da keine IP-Konfigurationen\n  vorhanden sind. Sie koennten diese \
-Informationen ueber die Kernel-Command-Line\n  durch die Einstellung \
-'ipappend 1' in pxelinux.cfg/* oder ldap\n  aktivieren. Sie werden durch \
-Token ('ldap')  in den Kernel Start Optionen\n  eingeschaltet."
-init_errldap="  Konnte nicht wenigstens die Grund-Funktionalitaet einrichten, \
-da keine IP-Konfigurationen\n  vorhanden sind. Achtung - ldap arbeitet nur in \
-Kombination mit IPAPPEND (PXE)\n  o.ae. oder DHCP!"
-init_errnwad="  Konnte die Netzwerk-Adapter, die durch den slx/mkramfs bzw. \
-mkdxsinitrd-Aufruf definiert\n  wurden, nicht laden. Bitte erneut aufrufen \
-und die passenden Module auflisten\n  (ohne Endung .ko)."
-init_bootmac="  Es scheint mehr als eine Ethernet-Karte installiert und die \
-passenden\n  Kernel-Module geladen zu sein. Das kann fuer Probleme sorgen, da \
-evtl.\n  die nicht verbundene Netzwerkkarte als das erste Interface konfiguriert\
- \n  wurde. Durch die Uebergabe der MAC Adresse des Bootdevices (IPAPPEND=3 in
-der PXElinux-Konfiguration) laesst sich dieses vermeiden."
-init_nveth="  Ihr System benutzt anscheinend eine NVidia-Netzwerkkarte. Hier \
-kann es\n  vorkommen, dass die MAC-Adresse nicht korrekt eingestellt wird. \
-Dieses laesst\n  sich durch die Uebergabe der MAC Adresse des Bootdevices \ 
-(IPAPPEND=3 in der PXElinux-Konfiguration) vermeiden."
-init_errdhcp="  Keine komplette IP-Konfiguration ueber DHCP bekommen. \
-Eventuell sollten Sie\n ueber die Kernel Start Optionen eine Hersteller Code \
-ID (vendor code identifier)\n  (VCI=vci) hinzufuegen."
-init_erripcfg="  Bis zu diesem Zeitpunkt konnte keine (gueltige) IP.\
-Konfiguration beschafft\n  werden. Die Maschine kann funktionieren, wenn \
-lokale Konfiguration per\n  Datei moeglich ist."
-init_errbld="  Konnte nicht das Modul ${NBD}.ko laden. Es wird gebraucht, \
-wenn Sie vorhaben, das\n  Netzwerk Block Geraet (network block device) (D)NBD \
-fuer den Klienten als Wurzel-Dateisystem zu verwenden."
-init_nbdcl="  Konnte den Network Block Geraete-Dienst nicht starten und damit \
-das Wurzel-Dateisystem\n  nicht einhaengen."
-init_nbddev="  Aus irgendeinem Grund ist /dev/${NBD}0 nie erschienen. Sie \
-sollten ihr udev-System\n  nach Listen von statischen Geraeten untersuchen."
-init_dnbd2s="  Nach 100 Versuchen konnte das dnbd2 Blockdevice keinen laufenden \
-Server finden.\n  Bitte ueberpruefen Sie die Erreichbarkeit."
-init_moddir="  Das angeforderte Modul- bzw. Firmware-Verzeichnis existiert \
-nicht. Das\n  koennte bedeuten:\n\
-  * Der Kernel wurde ausgetauscht/erneuert ohne einen neuen Aufruf \
-von slxmkramfs oder\n  mkdxsinitrd.\n  * Das eingehaengte Dateisystem \
-beinhaltet das Modul-Verzeichnis ueberhaupt nicht.\n    Sie sollten die Liste \
-der eingehaengten Dateisysteme pruefen und wenn /mnt\n    nicht leer ist, \
-'ls /mnt/lib/modules' ausfuehren."
-init_loadunions="  Stapeln mehrerer Verzeichnisse nicht moeglich, da kein \
-UnionFS/AUFS\n  Modul geladen ist."
-init_loadaufs="  Laden von AUFS/UnionFS schlug fehl - entweder das Modul ist \
-nicht vorhanden, oder\n  es passt nicht zum laufenden Kernel. Wenn Sie diese \
-Meldung nicht sehen\n  wollen, fügen Sie das Token 'noaufs'/'nounionfs' den \
-Kernel Start\n  Optionen hinzu oder loeschen Sie die Module."
-init_deselau="  Sie haben AUFS und UnionFS mittels Kernel-Commandline \
-ausgeschaltet, deshalb\n  wurde kein entsprechendes Kernel-Modul geladen."
-init_loadcow="  Laden von Copy On Write (COW - Spezielles Block Geraet) Modul \
-schlug fehl -\n  entweder das Modul nicht praesent oder es passt nicht zum \
-laufenden\n Kernel. Wenn Sie diese Meldung nicht sehen wollen, entfernen sie \
-das Token 'cowloop' aus den Kernel Start Optionen."
-init_loadufs="  Laden von UnionFS schlug fehl - entweder das Modul ist \
-nicht vorhanden, oder\n  es passt nicht zum laufenden Kernel. Wenn Sie diese \
-Meldung nicht mehr sehen\n  wollen, entfernen Sie das Token 'unionfs' von den \
-Kernel Start Optionen."
-init_cownonbd="  Laden des COW-Moduls ist sinnlos, wenn kein Netzwerk Block \
-Geraet benutzt wird oder\n  UnionFS als Lese- Schreib-Schicht spezifiziert \
-wurde. Entfernen Sie das UnionFS Token aus\n  den Kernel-Start-Optionen wenn \
-'cowloop' stattdessen verwendet werden soll."
-init_nfs="  Einhaengen des Wurzel Dateisystems ueber NFS wurde angefordert \
-durch die Kernel Start Optionen,\n  aber schlug fehl. Die folgenden Gruende \
-koennten verantwortlich sein:\n\
-  * Kein nfs.ko (und weitere dafuer benoetigte) Modul konnte geladen werden und \
-keine NFS Unterstuetzung war im\n  laufenden Kernel vorhanden - siehe \
-Fehlermeldungen darueber.\n\
-  * Sie versuchten, einen falschen Pfad einzuhaengen ($nfsroot).\n\
-  * Kein NFS-Server laeuft oder Sie haben nicht die Zugriffsberechtigungen auf \
-diesen."
-init_ldcfg="  Starte ldconfig - normalerweise ausgeschaltet. Wird mit der Kernel \
-Start Option\n  'noldsc' aktiviert. Eventuell sollten Sie zusaetzliche \
-Bibliothekspfade\n  zur ld.so.conf hinzufuegen."
-init_errlog="  Konnte die Log-Datei Konfiguration nicht anlegen in \
-/etc/${D_SYSCONFDIR}. Das\n  koennte auf schwerwiegende Fehler hindeuten."
-init_fstab="Das Erzeugen von /etc/fstab im Wurzel-Dateisystem des Clients \
-schlug fehl.\n  Die Abwesenheit dieser Datei koennte unvorhergesehenes Verhalten \
-der mount-Befehle\n  verursachen."
-init_errldcfg="  Aus irgendeinem Grund konnte die Erstellung von ld.so.cache \
-nicht rechtzeitig fertiggestellt\n  werden."
-init_infldcfg="  Sie entschieden sich, die Datei /etc/ld.so.cache nicht neu \
-zu erstellen. Das koennte Fehler verursachen\n  wenn Bibliotheken installiert \
-werden nachdem diese Datei auf dem Server erstellt wurde."
-init_errlfg="  Die ConfTGZ Quelle war ein lokales Device, welches nicht korrekt \
-eingebunden werden\n  konnte. Entweder wurde das falsche Device/Partition \
-angegeben oder das\n  Dateisystem ist dem Kernel nicht bekannt."
-init_errloop="  Der Loopback-Mounting des Rootfilesystem-Containers schlug \
-fehl. Entweder\n  die Datei existiert nicht, ist unlesbar oder es gibt \
-Probleme mit\n  den Filesystem-Modulen."
-init_errcfg="des Clients nicht rechtzeitig beendet\n  Sie sollten die Prozess \
-Liste pruefen und die Module, die bis zum jetzigen Zeitpunkt geladen wurden."
-init_errhw="  Aus irgendeinem Grund wurde die Hardware Auto-Konfiguration \
-$init_errcfg"
-init_errsw="  Aus irgendeinem Grund wurde die Software Konfiguration  $init_errcfg"
-init_wait="  Wartete $i Zeiteinheiten das Kernel-Modul- bzw. Firmware-Verzeichnis \
-auszuhaengen ..."
-init_errumnt="  Das Kernel Modul Verzeichnis auszuhaengen \
-scheiterte aus irgendeinem Grund. Sind einige\n  ,,modprobe'' noch aktiv!?"
-init_errsys="  Aushaengen des Kernel /sys Verzeichnisses schlug aus irgendeinem \
-Grund\n  fehl. Sie werden einige Fehlermeldungen bekommen,\
-\ndass einige Dateien nicht entfernt werden konnten."
-init_runinit="  Konnte switch_root/run-init nicht ausfuehren, wegen fehlender \
-Befehle\n  oder falsch angegebenen Parametern."
-init_picfg="  Das Plugin-Konfigurationsverzeichnis fehlt. Dieses könnte an einem \
-fehlgeschlagenen\n  holen der Client-Konfiguration liegen, weil entweder die \
-Datei nicht auf\n  dem Server verfuegbar ist oder der Transport nicht klappte."
-
-# messages from functions
-error_msg="Ein Fehler trat auf waehrend der Ausfuehrung des $0 Skripts:\n\n"
-error_nfe="\n  -> Dieser Fehler ist nicht schwerwiegend - setze fort ...\n"
-error_shell="\n  -> Fuehre Shell aus zum Debuggen ...\n"
-error_modload="Es schlug fehl, folgendes Modul zu laden:"
-error_modnfs="gebraucht zum einhaengen des Wurzel Dateisystems"
-error_nodhcp="  Sie versuchten ihr System mittels DHCP einzurichten, es wurde \
-aber kein brauchbarer DHCP\n  Client gefunden. Bitte pruefen Sie, ob sie einen \
-der folgenden Clients\n  installiert haben: dhclient dhcpcd pump udhcpc."
-error_dhcp="  Die folgenden Probleme koennten den Fehler verursachen:\n\
-  * Das af_packet.ko Modul ist weder geladen noch praesent im Kernel.\n\
-  * Kein Netzwerk Geraet ist praesent - weder ein passendes Modul\n\
-    wurde geladen noch ist praesent im laufenden Kernel.\n  Sie sollten \
-'lsmod' ausfuehren."
-error_dhclient="  Schwerer Fehler aufgetreten beim Aufrufen von dhclient.\n\
-$error_dhcp"
-error_ldapcfg="  Die Konfiguration via ldap ist noch nicht implementiert."
-error_errdcfg="  Bis jetzt noch keine Konfigurationsdaten bekommen via dhcp .."
-error_errfcfg="  Bis jetzt noch keine Konfigurationsdaten bekommen via tftp ..."
-error_errlcfg="  Bis jetzt noch keine Konfigurationsdaten bekommen via ldap ..."
-unpack_ConfTGZ="  Fehler beim entpacken des ConfTGZ.\nSind Sie sicher, dass es im \
-richtigen Format ist?"
-nomachsetup="  Die Datei machine-setup nicht gefunden. Es koennte sein, dass das \
-Konfigurations-\n  paket nicht erfolgreich vom Server beschafft wurde. Das \
-erkennen Sie daran,\n  dass die Verzeichnisse /initramfs, /rootfs angelegt \
-wurden. Ihr\n  OpenSLX Client wird deshalb nicht wie erwartet funktionieren."
-
-# messages from distro functions
-df_erritab="  Die Datei /etc/inittab existiert nicht oder ist keine regulaere. \
-\n  Sie wird fuer den Boot-Process benoetigt."
-df_errumod="    Das Laden des \"unix\" Moduls schlug fehl. \nWahrscheinlich \
-werden Probleme bei der Hardware-Erkennung auftreten."
-df_errserv="ist entweder nicht installiert oder das Start-Skript ist nicht \
-verfuegbar.\n  Deswegen macht der Start des Dienstes keinen Sinn. Bitte \
-deaktivieren Sie den Start\n  oder installieren Sie die benoetigten Dateien."
-df_errcron="  Das cron Start-Skript $df_errserv" 
-df_errsysl="  Das syslog Start-Skript $df_errserv"
-df_errsshd="  Das sshd Start-Skript $df_errserv"
-df_erryp="  Der NIS-Klient $df_errserv"
-df_errpmap="  Der Portmapper $df_errserv"
-df_erramnt="  Der Automounter $df_errserv"
-df_errnsc="  Der Name Service Zwischenspeicherungs Daemon $df_errserv\n  \
-Dieser Dienst koennte nuetzlich sein, um Daten von einem ldap Benutzer-\
-Verzeichnis zu bekommen."
-df_errafsd="  Kein AFS Verzeichnis erreichbar"
-df_errafsn="  Der AFS-Client Dienst ist nicht verfuegbar"
-df_errkbd="  Keine nicht-englische Tastatur und/oder Konsolenunterstuetzung \
-installiert.\n  Falls gewuenscht/benoetigt diese im Stage1 nachinstallieren!"
-
-# messages from servconfig
-scfg_nfs="  Das Einhaengen einer NFS Quelle schlug fehl..."
-scfg_ntptz="  Die Zeitzonen-Datei wurde nicht gefunden (gebraucht fuer die \
-NTP-Zeit Dienst Konfiguration)."
-scfg_evmlm="  Das Einbinden der lokalen Festplatte(npartition) des VMware-\
-Image-Verzeichnisses\n  schlug fehl."
-scfg_vmdir="  Aus irgendeinem Grund kann das runvmware Skript nicht \
-verfuegbar zu kopieren.\n  Das koennte das Ergebnis eines fehlgeschlagenen \
-Mount-Versuchs sein\n   oder die Datei fehlt auf dem Server."
-scfg_vmchs="  Das Auswahltool/menu fuer Virtuelle Machinen ist nicht im \
-~/templates\n  Verzeichnis vorhanden. Deshalb wurde kein Default KDM Menu \
-Eintrag erzeugt."
-scfg_erradir="  Es wird nur eine Verzeichnis-Ebene erlaubt, den Automounter \
-zu installieren und das\n  Verzeichnis sollte existieren (auf dem \
-Server-Export) oder sollte anlegbar sein\n  (z.B. durch UnionFS beschreibbares \
-Wurzel-Verzeichnis)."
-scfg_country="  Keine Konfiguration fuer die Lokalisierung gefunden in der \
-Konfigurations-Datei. Benutzer\n  Standard Laender-Einstellung \
-'${D_DEFAULTCOUNTRY}' definiert in $0."
-
-# messages from hwautocfg
-hcfg_hwsetup="  Die xserver-Konfigurations-Datei, erstellt von hwsetup, konnte \
-nicht\n  gefunden werden."
-gfx_msg="Bitte pruefen Sie ihre Grafik-Adapter-Einstellungen ($hw_graphic)."
-hw_msg="  Bitte pruefen Sie ihre vordefinierten Monitor-Einstellungen ($hw_monitor): \
-Automatische\n  Konfiguration des Bildschirms."
-hcfg_res="  $hwmsg Aufloesung wurde versucht aber nicht eingerichtet. Benutze \
-Standard-Aufloesungen (defined in xconfig)"
-hcfg_hwsetup="  Erwartete Informationen von hwsetup in \
-/tmp/hwsetup.info.\n  Teile des Systems koennen nicht eingerichtet werden. \
-Bitte pruefen, dass\n  hwsetup richtig installiert und ausfuehrbar ist."
-hcfg_keyb="  Keine Einstellungen fuer ihre Tastatur gefunden, verwende den \
-Standard-Wert '${XKEYBOARD}' definiert\n  in $0."
-