removed old theming, added new. the old one isn't usable anymore. in the new only the dirs are cleaned up. first commit.

git-svn-id: http://svn.openslx.org/svn/openslx/trunk@1334 95ad53e4-c205-0410-b2fa-d234c58c8868

26 files changed, 0 insertions, 1768 deletions

diff --git a/theming/openslx/bootsplash/animations/spinner.mng b/theming/openslx/bootsplash/animations/spinner.mng
deleted file mode 100644
index b54f5444..00000000
--- a/theming/openslx/bootsplash/animations/spinner.mng
+++ /dev/null
diff --git a/theming/openslx/bootsplash/config/bootsplash-1024x768.cfg b/theming/openslx/bootsplash/config/bootsplash-1024x768.cfg
deleted file mode 100644
index 5881a29f..00000000
--- a/theming/openslx/bootsplash/config/bootsplash-1024x768.cfg
+++ /dev/null
@@ -1,30 +0,0 @@
-# This is a bootsplash configuration file for resolution 1024x768.
-#
-# See www.bootsplash.org for more information.
-# Originally by Jakub Steiner <jimmac@novell.com>
-#
-version=3
-state=1
-progress_enable=1
-overpaintok=1
-
-
-fgcolor=7
-bgcolor=0
-
-tx=20
-ty=60
-tw=994
-th=708
-
-
-jpeg=/tmp/bootsplash/images/bootsplash-1024x768.jpg
-silentjpeg=/tmp/bootsplash/images/silent-1024x768.jpg
-
-mnganim anim /tmp/bootsplash/animations/spinner.mng silent center 512 614 scale 1024:1600
-
-trigger silent play anim
-trigger "isdown" quit
-trigger "rlreached 5" toverbose
-trigger "rlchange 0" tosilent
-trigger "rlchange 6" tosilent
diff --git a/theming/openslx/bootsplash/config/bootsplash-1280x1024.cfg b/theming/openslx/bootsplash/config/bootsplash-1280x1024.cfg
deleted file mode 100644
index 021c3a6d..00000000
--- a/theming/openslx/bootsplash/config/bootsplash-1280x1024.cfg
+++ /dev/null
@@ -1,30 +0,0 @@
-# This is a bootsplash configuration file for resolution 1280x1024.
-#
-# See www.bootsplash.org for more information.
-# Originally by Jakub Steiner <jimmac@novell.com>
-#
-version=3
-state=1
-progress_enable=1
-overpaintok=1
-
-
-fgcolor=7
-bgcolor=0
-
-tx=20
-ty=60
-tw=1250
-th=964
-
-
-jpeg=/tmp/bootsplash/images/bootsplash-1280x1024.jpg
-silentjpeg=/tmp/bootsplash/images/silent-1280x1024.jpg
-
-mnganim anim /tmp/bootsplash/animations/spinner.mng silent center 640 819 scale 1280:1600
-
-trigger silent play anim
-trigger "isdown" quit
-trigger "rlreached 5" toverbose
-trigger "rlchange 0" tosilent
-trigger "rlchange 6" tosilent
diff --git a/theming/openslx/bootsplash/config/bootsplash-640x480.cfg b/theming/openslx/bootsplash/config/bootsplash-640x480.cfg
deleted file mode 100644
index f190272b..00000000
--- a/theming/openslx/bootsplash/config/bootsplash-640x480.cfg
+++ /dev/null
@@ -1,31 +0,0 @@
-# This is a bootsplash configuration file for
-# SUSE Linux 10.1, resolution 640x480.
-#
-# See www.bootsplash.org for more information.
-# Written by Jakub Steiner <jimmac@novell.com>
-#
-version=3
-state=1
-progress_enable=0
-overpaintok=1
-
-
-fgcolor=7
-bgcolor=0
-
-tx=20
-ty=60
-tw=610
-th=420
-
-
-jpeg=/tmp/bootsplash/images/bootsplash-640x480.jpg
-silentjpeg=/tmp/bootsplash/images/silent-640x480.jpg
-
-mnganim anim /tmp/bootsplash/animations/spinner.mng silent center 320 384 scale 640:1600
-
-trigger silent play anim
-trigger "isdown" quit
-trigger "rlreached 5" toverbose
-trigger "rlchange 0" tosilent
-trigger "rlchange 6" tosilent
diff --git a/theming/openslx/bootsplash/config/bootsplash-800x600.cfg b/theming/openslx/bootsplash/config/bootsplash-800x600.cfg
deleted file mode 100644
index d00f5025..00000000
--- a/theming/openslx/bootsplash/config/bootsplash-800x600.cfg
+++ /dev/null
@@ -1,30 +0,0 @@
-# This is a bootsplash configuration file for resolution 800x600.
-#
-# See www.bootsplash.org for more information.
-# Originally by Jakub Steiner <jimmac@novell.com>
-#
-version=3
-state=1
-progress_enable=1
-overpaintok=1
-
-
-fgcolor=7
-bgcolor=0
-
-tx=20
-ty=60
-tw=770
-th=540
-
-
-jpeg=/tmp/bootsplash/images/bootsplash-800x600.jpg
-silentjpeg=/tmp/bootsplash/images/silent-800x600.jpg
-
-mnganim anim /tmp/bootsplash/animations/spinner.mng silent center 400 480 scale 800:1600
-
-trigger silent play anim
-trigger "isdown" quit
-trigger "rlreached 5" toverbose
-trigger "rlchange 0" tosilent
-trigger "rlchange 6" tosilent
diff --git a/theming/openslx/bootsplash/images/bootsplash-1024x768.jpg b/theming/openslx/bootsplash/images/bootsplash-1024x768.jpg
deleted file mode 100644
index e4d70c57..00000000
--- a/theming/openslx/bootsplash/images/bootsplash-1024x768.jpg
+++ /dev/null
diff --git a/theming/openslx/bootsplash/images/bootsplash-1280x1024.jpg b/theming/openslx/bootsplash/images/bootsplash-1280x1024.jpg
deleted file mode 100644
index 98d864b4..00000000
--- a/theming/openslx/bootsplash/images/bootsplash-1280x1024.jpg
+++ /dev/null
diff --git a/theming/openslx/bootsplash/images/bootsplash-640x480.jpg b/theming/openslx/bootsplash/images/bootsplash-640x480.jpg
deleted file mode 100644
index a7328579..00000000
--- a/theming/openslx/bootsplash/images/bootsplash-640x480.jpg
+++ /dev/null
diff --git a/theming/openslx/bootsplash/images/bootsplash-800x600.jpg b/theming/openslx/bootsplash/images/bootsplash-800x600.jpg
deleted file mode 100644
index e628f8d8..00000000
--- a/theming/openslx/bootsplash/images/bootsplash-800x600.jpg
+++ /dev/null
diff --git a/theming/openslx/bootsplash/images/silent-1024x768.jpg b/theming/openslx/bootsplash/images/silent-1024x768.jpg
deleted file mode 100644
index 788c625c..00000000
--- a/theming/openslx/bootsplash/images/silent-1024x768.jpg
+++ /dev/null
diff --git a/theming/openslx/bootsplash/images/silent-1280x1024.jpg b/theming/openslx/bootsplash/images/silent-1280x1024.jpg
deleted file mode 100644
index ddeeedcd..00000000
--- a/theming/openslx/bootsplash/images/silent-1280x1024.jpg
+++ /dev/null
diff --git a/theming/openslx/bootsplash/images/silent-640x480.jpg b/theming/openslx/bootsplash/images/silent-640x480.jpg
deleted file mode 100644
index 234ea2ee..00000000
--- a/theming/openslx/bootsplash/images/silent-640x480.jpg
+++ /dev/null
diff --git a/theming/openslx/bootsplash/images/silent-800x600.jpg b/theming/openslx/bootsplash/images/silent-800x600.jpg
deleted file mode 100644
index 02213917..00000000
--- a/theming/openslx/bootsplash/images/silent-800x600.jpg
+++ /dev/null
diff --git a/theming/openslx/bootsplash2/bin/splashy b/theming/openslx/bootsplash2/bin/splashy
deleted file mode 100755
index eceb6785..00000000
--- a/theming/openslx/bootsplash2/bin/splashy
+++ /dev/null
diff --git a/theming/openslx/bootsplash2/bin/splashy_update b/theming/openslx/bootsplash2/bin/splashy_update
deleted file mode 100755
index 810de9f4..00000000
--- a/theming/openslx/bootsplash2/bin/splashy_update
+++ /dev/null
diff --git a/theming/openslx/bootsplash2/etc/splashy/config.xml b/theming/openslx/bootsplash2/config.xml
index 16080a07..16080a07 100644
--- a/theming/openslx/bootsplash2/etc/splashy/config.xml
+++ b/theming/openslx/bootsplash2/config.xml
diff --git a/theming/openslx/bootsplash2/init b/theming/openslx/bootsplash2/init
deleted file mode 100755
index f6bb30af..00000000
--- a/theming/openslx/bootsplash2/init
+++ /dev/null
@@ -1,862 +0,0 @@
-#!/bin/sh
-# Copyright (c) 2003 - 2006 - RZ Uni Freiburg
-# Copyright (c) 2006, 2007 - OpenSLX GmbH
-#
-# This program is free software distributed under the GPL version 2.
-# See http://openslx.org/COPYING
-#
-# If you have any feedback please consult http://openslx.org/feedback and
-# send your feedback to feedback@openslx.org
-#
-# General information about OpenSLX can be found at http://openslx.org
-#
-# Main script for new type of initial ramdisk for OpenSLX linux stateless
-# clients version 4
-
-#############################################################################
-# device files get their own filesystem (to be move mounted later)
-devdir="/dev"
-mount -n -t tmpfs -o 'size=25%,mode=0755' initramfsdevs ${devdir}
-
-# create basic device files an directories in dev (for most hardware related
-# devices mdev should handle that)
-for i in "/dev/mem c 1 1" "/dev/null c 1 3" "/dev/zero c 1 5" \
-         "/dev/urandom c 1 9" "/dev/kmsg c 1 11" "/dev/tty0 c 4 0" \
-         "/dev/tty1 c 4 1" "/dev/tty2 c 4 2" "/dev/tty3 c 4 3" \
-         "/dev/tty4 c 4 4" "/dev/tty5 c 4 5" "/dev/tty6 c 4 6" \
-         "/dev/tty7 c 4 7" "/dev/tty8 c 4 8" "/dev/tty9 c 4 9" \
-         "/dev/tty10 c 4 10" "/dev/tty c 5 0" "/dev/console c 5 1" \
-         "/dev/ptmx c 5 2" "/dev/psaux c 10 1" "/dev/agpgart c 10 175" \
-         "/dev/fb0 c 29 0" "/dev/bootsplash p" "/dev/xconsole p"; do
-  mknod $i
-done
-mkdir -p ${devdir}/pts ${devdir}/shm ${devdir}/.udevdb ${devdir}/.udev
-
-# source functions file common for all distros, messages contains all error
-# and info output (for some reason the error output is not produced properly
-# - crash)
-
-# how do the localization here? There is not yet a country-Variable
-. /etc/messages
-. /etc/functions || ( echo -e $init_mff && sleep 100 )
-. /etc/distro-functions || ( echo -e $init_dff && sleep 100 )
-# distro specific configuration settings (several file and directory
-# variables)
-. /etc/sysconfig/config || ( echo -e $init_dscf && sleep 100 )
-# configuration settings for this slx system's environment
-. /etc/sysconfig/slxsystem.conf 2>/dev/null || ( echo -e ${init_sscf} && \
-  sleep 100 )
-# initramfs-setup configuration (common settings for all clients using a
-# certain InitRamFS generated by slxmkramfs/mkdxsinitrd)
-[ -f /etc/initramfs-setup ] && . /etc/initramfs-setup 2>/dev/null
-
-export PATH=/bin:/sbin:/usr/bin/:/usr/sbin
-export date="${slxconf_date}"
-
-export DEBUGLEVEL=0
-export KERNEL="${slxconf_kernver}"
-export NWMODULES="${slxconf_listnwmod}"
-export DISTRO_NAME="${slxconf_distro_name}"
-export DISTRO_VER="${slxconf_distro_ver}"
-export SYSTEM_NAME="${slxconf_system_name}"
-export SLXVERSION="${slxconf_slxver}"
-
-# do not use dnbd cache file
-nodnbdcache="yes"
-
-# set a default LAN interface, might be modified for WLAN or on machines with
-# more than one ethernet card built in
-nwif="eth0"
-
-# mount the important standard directories
-[ ! -f /proc/cpuinfo ] && mount -n -t proc proc /proc
-[ ! -d /sys/class ] && mount -n -t sysfs sysfs /sys
-
-# fixme: shut down if script fails
-trap "exec (sleep 30; echo o>/proc/sysrq-trigger)" \
-  SIGHUP SIGINT SIGPIPE SIGTERM
-
-# if no kernel version is set, try to get it directly from /proc
-if [ -z $KERNEL ] ; then
-  KERNEL=$(cat /proc/version)
-  KERNEL=${KERNEL#*version }
-  KERNEL=${KERNEL% (*) (*}
-fi
-# set defaults for some important variables, might be overwritten via
-# kernel commandline
-tmpfssize="50%"
-cowsize="50%"
-rwdir=/dev/shm
-nfsro="nfs"
-
-# load usb modules for keyboard (reenable usb keyboards, otherwise the
-# admin has to wait until second run of hwsetup late in stage3)
-hwautocfg pre
-
-# run pre init script and user defined preinit.local, copied by mkdxsinitrd
-# from /var/lib/openslx/config/... in stage2
-preinit
-[ -x /bin/preinit.local ] && /bin/preinit.local
-
-# start device auto discovery service - busybox (or distro specific function)
-mdev -s
-
-# switch off the several configuration methods, will be switched on
-# according to kernel commandline settings
-echo "noldap" > /tmp/ldap-done
-
-# External configuration file retrieval (per tftp) must be done, as otherwise
-# we will never get the machine-setup file. By default, we try a predefined
-# standard path (.../tftpboot/client-config/ ...)
-file="yes"
-
-# splashy stuff
-nosplash=0
-
-# read kernel commandline
-read KCMDLINE < /proc/cmdline
-export KCMDLINE
-# read the system wide machine-setup and then the kernel commandline
-for opts in $(sed "s/#.*//" /etc/initramfs-setup) ${KCMDLINE} ; do
-  case ${opts} in
-    # localization
-    country=*)
-      COUNTRY=${opts#country=}
-      echo -e "\n# localization information gotten via kernel command line \
-in $0\ncountry=\"${COUNTRY}\"" >> /etc/machine-setup
-    ;;
-    # single token for debugging ...
-    debug)
-      DEBUGLEVEL=1;;
-    # ... or a specified debug level
-    debug=*)
-      DEBUGLEVEL=${opts#debug=}
-      [ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 20 ] && \
-        echo "** SLX init started near $(sysup)"
-    ;;
-    # essid for WLAN boot (experimental, might be moved to a module component
-    # in later versions
-    essid=*)
-      essid=${opts#essid=}
-    ;;
-    # if configuration should not be gathered by dhcp client
-    nodhcp)
-      nodhcp="yes"
-      echo "nodhcp" >/tmp/dhcp-done
-    ;;
-    nofile)
-      unset file
-      echo "nofile" >/tmp/file-done
-    ;;
-    # if ldap configuration should be triggered
-    ldap)
-      ldap="yes"
-      rm /tmp/ldap-done
-    ;;
-    # ldap configuration with host and port to contact (base)
-    ldap=*)
-      ldap="yes"
-      rm /tmp/ldap-done
-    ;;
-    # file source with tftp server and file location on the server
-    file=*|file)
-      if [ "${opts}" != "file" ] ; then
-        fileprot=$(uri_token ${opts#file=} prot)
-        fileserv=$(uri_token ${opts#file=} server)
-        filepath=$(uri_token ${opts#file=} path)
-      fi
-    ;;
-    # if ld.so.cache should be generated; should be switched on when composing
-    # rootfs from more than one source
-    ldsc)
-      ldsc="yes";;
-    # simple union of base ro rootdir with tempfs on top
-    unionfs)
-      unionfs=1;;
-    # additional source to unify root filesystem with; the top layer will be
-    # the tempfs
-    unionfs=*)
-      unionfs=1
-      uniondirs=${opts#unionfs=}
-      # most probably it is a good idea to run ldconfig, so enable it
-      ldsc="yes"
-    ;;
-    # same for AUFS; alternative to unionfs
-    aufs)
-      aufs=1;;
-    aufs=*)
-      aufs=1
-      uniondirs=${opts#aufs=}
-      # most probably it is a good idea to run ldconfig, so enable it
-      ldsc="yes"
-    ;;
-    # if cowloop should be used, only ontop of network block device and in
-    # combination with classical fs, like ext2 useful
-    cowloop=*)
-      cowloop=1
-      #cowsize=${opts#cowloop=}
-    ;;
-    # rootfs will void the variables (d)nbdroot, nfsroot ...
-    # fixme: allow multiple rootfs sources to be unioned!?
-    # if strinstr " " "$rootfs" ...
-    rootfs=*)
-      rootfs=${opts#rootfs=}
-      rootfs=${rootfs#\"}
-      rootfs=${rootfs%%\"}
-      srvproto=$(uri_token $rootfs prot)
-      case $srvproto in
-        nfs)
-          # nfsroot consists now of two different parts
-          nfspath=$(uri_token $rootfs path)
-          nfsserver=$(uri_token $rootfs server)
-          echo -e "\n# nfs root information gotten via kernel command \
-line in $0\n#nfsroot=\"${nfsserver}:${nfspath}\"\n" >> /etc/machine-setup
-        ;;
-        *nbd*)
-          bldmod=$srvproto
-          # get settings for nbd-client, filesystem equals to path in URI
-          # notation (remove leading slash from filesystem at the end)
-          bldhost=$(uri_token $rootfs server)
-          bldport=$(uri_token $rootfs port)
-          bldrfst=$(uri_token $rootfs path)
-          bldrfst=${bldrfst#/*}
-        ;;
-        aoe)
-          echo "Not implemented yet"
-          bldmod=
-        ;;
-        iscsi)
-          echo "Not implemented yet"
-          bldmod=
-          #iscsiserver=$(uri_token $rootfs server)
-          #iscsiport=$(uri_token $rootfs port)
-          #iscsitarget=$(uri_token $rootfs path)
-        ;;
-        lbdev)
-          # use a local device for mounting root block device with given
-          # filesystem, e.g. rootfs=device://sda2/squashfs
-          bldmod="sata_sil sd_mod"
-          blddev=$(uri_token $rootfs server)
-          bldfst=$(uri_token $rootfs path)
-          bldfst=${bldfst#/*}
-        ;;
-      esac
-    ;;
-    # size of cache dnbd should use within ram
-    dcsize=*)
-      dnbdcachesize=${opts#dcsize=};;
-    # ip configuration client-ip:server-ip:gateway:netmask
-    ip=*)
-      ipinfo=${opts#ip=};;
-    # deprecated: nfs server and path (will be removed soon)
-    nfsroot=*)
-      nfsroot=${opts#nfsroot=}
-      echo -e "\n# nfs root information gotten via kernel command line in \n\
-$0\n# deprecated: please use rootfs=nfs://...\nnfsroot=\"${nfsroot}\"\n" \
->> /etc/machine-setup
-    ;;
-    # size of tempfs if not max. 50% of RAM should be used
-    tmpfssize=*)
-      tmpfssize=${opts#tmpfssize=};;
-    # vendor code identifier for dhcp requests, that way odlx clients could
-    # be distinguished from other (dhcp) clients
-    vci=*)
-      vci=${opts#vci=};;
-    xenbr)
-      xenbr=1;;
-    # splashy stuff
-    nosplash)
-      nosplash=1;;
-  esac
-done
-
-# splashy stuff
-[ ${DEBUGLEVEL} = 0 -a ${nosplash} = 0 ] && /bin/splashy boot 2>/dev/null
-
-# at this point a timer should be started to ensure an automated reboot
-# or halt of the machine if SLX init does not succeed (e.g. missing kernel
-# module for the network adaptor)
-if [ ${DEBUGLEVEL} -lt 3 -o ${DEBUGLEVEL} = 8 ] ; then
-  cat<<EOF > /bin/watchdog
-#!/bin/ash
-echo \$$ > /tmp/watchdogpid
-[ ! -f /proc/version ] && mount -n -t proc proc /proc
-sleep 120 2> /dev/null
-echo "o" > /proc/sysrq-trigger
-EOF
-  chmod u+x /bin/watchdog
-  watchdog &
-fi
-
-# check if at least one type of IP configuration is availabe
-if [ -n "$nodhcp" -a -z "$ldap" -a -z "$ipinfo" ] ; then
-  echo -e "# You did not specify any advanced configuration mode for your \
-clients. You\n# might want to add the token 'dhcp' for DHCP configuration, \
-'file(=source)'\n# for config file get via TFTP or 'ldap(=source)' for LDAP \
-configuration to\n# your kernel command line." >> /etc/machine-setup
-  if strinfile "clientip" /etc/initramfs-setup ; then
-    # IP configuration seems to be present in machine-setup file
-    # TODO: FIX this, as it will clobber all kernel-cmdline values!
-    . /etc/initramfs-setup
-    ipinfo="ip=$clientip:$serverip:$gateway:$subnet_mask"
-  else
-    error "$init_errip"
-  fi
-fi
-# for ldap configuration at least basic IP setup is needed to contact the
-# server
-[ -n "$nodhcp" -a -n "$ldap" -a -z "$ipinfo" ] && error "$init_errldap"
-# set debug level and logfile
-if [ $DEBUGLEVEL -eq 20 ] ; then
-  echo "** Setting debuglevel to ${DEBUGLEVEL} at $(sysup)"
-else
-  echo "Setting debuglevel to ${DEBUGLEVEL}"
-fi
-export MODPRV=" "
-export LOGFILE
-if [ "${DEBUGLEVEL}" -gt 0 -a "${DEBUGLEVEL}" != 8 ] ; then
-  # if LOGFILE should be used within initial ramdisk add '/mnt' in front
-  # of the variable
-  LOGFILE="/var/log/slx-boot.log"
-  echo "1 4 1 7" >/proc/sys/kernel/printk
-  [ "${DEBUGLEVEL}" -ge 2 ] && MODPRV="-v"
-  [ "${DEBUGLEVEL}" -gt 3 -a "${DEBUGLEVEL}" -le 10 ] && {
-    set -x
-    # and the kernel too
-    echo "7 7 7 7" >/proc/sys/kernel/printk; }
-  [ "${DEBUGLEVEL}" -gt 10 -a "${DEBUGLEVEL}" -le 20 ] && set +x
-else
-  # switch off most of kernel debug output
-  echo "0 0 0 0" >/proc/sys/kernel/printk
-  # modprobe should stay quiet
-  MODPRV="-q"
-  LOGFILE="/dev/null"
-  # redirect console (after /dev/null is available, and /dev mounted)
-  [ "${DEBUGLEVEL}" != 8 ] && exec < /dev/console > /dev/null 2>&1
-fi
-# load network adaptor modules, check for WLAN specific settings and check
-# for multiple ethernet interfaces (not implemented yet)
-hwautocfg nwmod
-if [ -n "${essid}" ] ; then
-  # WLAN setup will most probably change the network interface name stored in
-  # nwif (to wlan0 or something like that)
-  wlanlinksetup
-  #echo "Starting shell for testing of WLAN setup procedure"
-  #/bin/ash
-else
-  # check here for the active ethernet link
-  ip link show dev eth1 >/dev/null 2>&1 && error "$init_2eif" nonfatal
-fi
-
-# set up loopback networking
-[ $DEBUGLEVEL -eq 20 ] && echo "** starting ip config at $(sysup)"
-ip link set dev lo up
-ip addr add 127.0.0.1/8 dev lo
-ip link set dev $nwif up || error "$init_noeth"
-macaddr=$(ip link show dev $nwif|sed -n "/ether [0-9e-f]\{2\}:.*/p" \
-  |sed -e "s/.*ether //;s/ .*//")
-
-# XEN bridge config
-[ -n "$xenbr" ] && xenbr_config
-
-# analyze ip information from the kernel command line and put parts
-# of it into several variables
-if [ -n "$ipinfo" ] ; then
-  getip () {
-    local val="$ipinfo:"; i=$(($1 - 1));
-    while [ $i -gt 0 ] ; do
-      val=${val#*:} ; i=$(($i - 1));
-    done;
-  echo $val|sed "s/:.*//"; }
-  clientip=$(getip 1)
-  serverip=$(getip 2)
-  gateway=$(getip 3)
-  subnet_mask=$(getip 4)
-  echo -e "# ip configuration written by $0 script\nclientip=$clientip\n\
-subnet_mask=$subnet_mask\ngateway=$gateway\nserverip=$serverip" \
-    >>/etc/machine-setup
-  # set static ip address
-  ip addr add $clientip/$(nm2pref $subnet_mask) dev $nwif
-  ip route add default via $gateway
-else
-  noipyet="yes"
-fi
-# get configuration data via dhcp (with vendor code identifier if present
-# in ${vci} from kernel command line or machine-setup) ...
-[ -z "$nodhcp" ] && rundhcp ${vci} &
-if [ -n "$noipyet" ] ; then
-  waitfor /tmp/dhcp-done 20000
-  if [ -f /etc/machine-setup ] ; then
-    . /etc/machine-setup
-    [ -f /tmp/confviadhcp ] && . /tmp/confviadhcp
-    [ -z "$clientip" -o -z "$subnet_mask" -o -z "$gateway" \
-      -o -z "$broadcast_address" ] && error "$init_errdhcp"
-    ip addr add $clientip/$(nm2pref $subnet_mask) broadcast $broadcast_address \
-      dev $nwif
-    ip route add default via $gateway
-  else
-    if [ -n "$file" -a "$srvproto" = "lbdev" ] ; then
-      error "$init_erripcfg" nonfatal
-    else
-      error "$init_erripcfg"
-    fi
-  fi
-fi
-# check if serverip is set as variable @@@serverip@@@
-sed "s,@@@serverip@@@,$serverip," -i /etc/machine-setup
-[ $DEBUGLEVEL -eq 20 ] && echo "** finished ip config at $(sysup)"
-# ... or ldap if available (in background)
-[ -n "$ldap" ] && ldapconf &
-# ... or via tftp file get (in background)
-[ -n "$file" ] && fileget &
-
-# if root filesystem should be imported via local or a network block device
-if [ -n "${bldmod}" ] ; then
-  # load block device driver(s) if needed
-  for module in ${bldmod} ; do
-    modprobe ${MODPRV} ${module} || error "$init_errbld"
-  done
-  [ -x /bin/mdev ] && mdev -s
-  [ -z "$bldrfst" ] && bldrfst=squashfs
-  bldhost=$(checkip $bldhost)
-  if [ $DEBUGLEVEL -eq 20 ] ; then
-    echo "** starting setup of ${bldmod} at $(sysup)"
-  else
-    echo "Stateless client using ${bldmod} on $bldhost:$bldport with $bldrfst"
-  fi
-  # fixme: check for fs in /proc/filesystems before trying to load the module
-  modprobe ${MODPRV} ${bldrfst} || error "$init_errbld" nonfatal
-
-  case "${srvproto}" in
-    # network block device present in standard kernel
-    nbd)
-      RDEV=/dev/nbd0
-      waitfor "${RDEV}" 20000 || error "$init_nbddev"
-      i=0
-      while ! nbd-client $bldhost $bldport ${RDEV} ; do
-        usleep 100000
-        i=$(($i + 1))
-        if [ $i -ge 1000 ] ; then
-          error "$init_nbds"; break
-        fi
-      done
-      usleep 100
-      echo noop > /sys/block/nbd0/queue/scheduler
-      # switch off unneeded block read ahead
-      echo "0" > /sys/block/nbd0/queue/read_ahead_kb
-      ;;
-    # dnbd2 by Vito Di Leo
-    dnbd2)
-      RDEV=/dev/vnbd0
-      waitfor "${RDEV}" 20000 || error "$init_nbddev"
-      # check for others in machine-setup and then kernel cmdline
-      rootfs="$(sed -n "/rootfs=/p" /etc/machine-setup|sed "s,rootfs=,,;s,\",,g") "
-      [ -z "$rootfs" ] && \
-        rootfs="$(cat /proc/cmdline|sed "s,.*rootfs=\",,;s,\".*,,") "
-      i=0
-      while [ "x$bldhost" != "x" ]; do
-        echo $bldhost $bldport > /sys/block/vnbd0/server${i}/sock
-        i=$(($i + 1))
-        rootfs=${rootfs#* }
-        bldsp=$(echo ${rootfs}|sed "s, .*,,")
-        bldhost=$(uri_token $bldsp server)
-        bldport=$(uri_token $bldsp port)
-      done
-      # quickhack, should be read in from URI
-      echo 1 > /sys/block/vnbd0/config/vid
-      echo 1 > /sys/block/vnbd0/config/rid
-      echo noop > /sys/block/vnbd0/queue/scheduler
-      i=0
-      while [ $(cat /sys/block/vnbd0/config/running) != 1 ] ; do
-        echo 1 > /sys/block/vnbd0/config/running
-        usleep 5000
-        i=$(($i + 1))
-        if [ $i -ge 1000 ] ; then
-          error "$init_dnbd2s"; break
-        fi
-      done
-      # echo "0" > /sys/block/vnbd0/queue/read_ahead_kb
-      ;;
-    # dnbd by Thorsten Zitterell
-    dnbd)
-      # quickhack
-      RDEV=/dev/dnbd0
-      if [ -z $nodnbdcache ] ; then  # variable not really used yet
-        mkdir /dnbd
-        mount -n -o 'size=10%' -t tmpfs tmpfs /dnbd
-        ( cat /dev/zero > /dnbd/cache 2>/dev/null || echo "ok" >/tmp/cache ) &
-        clientopt="-c /dnbd/cache"
-        waitfor /tmp/cache 10000
-      fi
-      [ $(echo $bldhost|sed "s,\..*,,") -ge 224 ] && \
-        ip route add 224.0.0.0/4 dev $nwif
-      waitfor /dev/dnbd0 10000 || error "$init_nbddev"
-      echo "dnbd-client -b $bldhost -d $RDEV $clientopt"
-      while ! dnbd-client -b $bldhost -d $RDEV $clientopt ; do
-        usleep 10000
-      done
-      # problem with squashfs and cfq scheduler
-      echo noop > /sys/block/dnbd0/queue/scheduler
-      echo 0 > /sys/block/dnbd0/queue/read_ahead_kb
-      ;;
-    lbdev)
-      # using clients local block device (disk partition is to be specified)
-      RDEV=/dev/$blddev
-      ;;
-  esac
-  RWRO="ro"
-  if [ -n "${cowloop}" -a -x /bin/cowdev ] ; then
-    modprobe ${MODPRV} cowloop || {
-      error "$init_loadcow" nonfatal
-      unset cowloop; }
-    [ -x /bin/mdev ] && mdev -s
-  fi
-  if [ -n "${cowloop}" ] ; then
-    if [ -n "${unionfs}" -o -n "${aufs}" ] ; then
-      error "$init_cownobld"
-      unset unionfs aufs
-    fi
-    echo "Using Copy-on-Write block device for rw access"
-    mount -n -t tmpfs -o size=${cowsize} ramfs ${rwdir}
-    mkdir /dev/cow && mknod /dev/cow/ctl b 241 255
-    usleep 200
-    ln -s /dev/cowloop0 /dev/cow/0
-    # fixme - cowdev depending on blockdev choosen above ...
-    cowdev -a /dev/nbd0 ${rwdir}/nbd.cow
-    usleep 200
-    RWRO="rw"
-    RDEV=/dev/cow/0
-    # run ldconfig if not switched off via kernel command line
-    ldcfg
-  else
-    # use normal UnionFS behaviour because rootfs is not NFS
-    unset nfsro
-  fi
-  # finally mount the configured network/local block device
-  for i in 0 5000 20000 100000 500000 1000000 ; do
-    usleep $i
-    mount -n -t $bldrfst -o $RWRO $RDEV /mnt 2>/dev/null && break
-  done
-  [ $DEBUGLEVEL -eq 20 ] && echo "** finished blockdev setup stuff at $(sysup)"
-elif [ -n ${iscsiserver} ] ; then
-  [ $DEBUGLEVEL -eq 20 ] && echo "** started setting up iSCSI initiator at \
-$(sysup)"
-  #if [ -n ${iscsitarget} ] ; then
-  #  echo "InitiatorName=${iscsitarget}"|sed "s,@@@serverip@@@,$serverip," \
-  #    >/etc/initiatorname.iscsi
-  #else
-  # discovery
-  #fi
-  #echo -e "node.startup = automatic">/etc/iscsid.conf
-  #iscsid -c /etc/iscsid.conf
-  # the cowloop part has to be moved (option for iscsi devices too)
-  # and should be generalized for nbd, dnbd, iscsi
-fi
-
-# splashy stuff
-[ $DEBUGLEVEL = 0 ] && /bin/splashy_update "progress 20" 2>/dev/null
-
-# if no type of root filesystem is passed via kernel command line try
-# information gathered from dhcp process (only valid for nfs)
-if [ -z "${bldmod}" -a -z "${bldhost}" -a -z "${nfsroot}" ] ; then
-  # information has to be read from dhcp and ldap configuration
-  cfgcomplete
-fi
-# mount nfs rootfs
-if [ -z "${bldmod}" -a -z "${bldserver}" ] ; then
-  [ $DEBUGLEVEL -eq 20 ] && echo "** started nfs mount"
-  # read in extended machine-setup
-  . /etc/machine-setup
-  # prefer nfsserver and nfspath from kernel commandline over the information
-  # gotten from dhcp server
-  if [ -n "${nfsserver}" -a -n "${nfspath}" ] ; then
-    # check if nfsserver is set as variable @@@serverip@@@
-    nfsserver=$(checkip $nfsserver)
-    nfsroot=${nfsserver}:${nfspath}
-  else
-    # the root_path should contain server ip and path in nfsroot notation
-    nfsroot=${root_path}
-  fi
-  for proto in tcp udp fail; do
-    [ $proto = "fail" ] && { error "$init_nfs"; break; }
-    mount -n -t nfs -o ro,nolock,${proto} ${nfsroot} /mnt && break
-  done
-  [ $DEBUGLEVEL -eq 20 ] && echo "** finished nfs mount at $(sysup)"
-fi
-
-# get the complete collection of kernel modules available
-mount -n --bind /mnt/lib/modules/${KERNEL} /lib/modules/${KERNEL} || \
-  error "$init_moddir"
-# start hardware configuration as background process if not a special
-# debuglevel (21) is used for the option of manual hwautocfg start
-if [ ${DEBUGLEVEL} = 21 ] ; then
-  echo "You can run 'hwautocfg main &' manually now ..."
-  /bin/sh
-else
-  [ $DEBUGLEVEL -eq 20 ] && echo "** started hwautocfg in background at \
-$(sysup)"
-  hwautocfg main &
-fi
-
-union_type=""
-# try to use unionfs for rw access if available
-if [ -n "${unionfs}" ]; then
-  modprobe ${MODPRV} unionfs  && union_type="UnionFS"
-  if [ -z "$union_type" ]; then
-	error "$init_loadufs" nonfatal
-	unset unionfs
-	# if unionfs is not available, check for aufs and inform user
-        modprobe ${MODPRV} -n aufs && error $init_noufs_butaufs
-  fi
-fi
-# try to use aufs for rw access if available
-if [ -n "${aufs}" ]; then
-  modprobe ${MODPRV} aufs   && union_type="AUFS"
-  if [ -z "$union_type" ]; then
-	error "$init_loadaufs" nonfatal
-	unset aufs
-	# if aufs is not available, check for unionfs and inform user
-        modprobe ${MODPRV} -n unionfs && error $init_noaufs_butufs
-  fi
-fi
-
-# splashy stuff
-[ $DEBUGLEVEL = 0 ] && /bin/splashy_update "progress 30" 2>/dev/null
-
-# setup of client root filesystem dependent on the availability of UnionFS
-if [ -n "${unionfs}" -o -n "${aufs}" ] ; then
-  echo "Using ${union_type} for rw access"
-  mkdir -p ${rwdir}/union ${rwdir}/uniontmp /rorootfs
-  mount -n -t tmpfs none ${rwdir}/uniontmp
-  # hack for handling unionfs with patched run-init
-  mount -n --move /mnt /rorootfs
-  if [ "$union_type" == "UnionFS" ]; then
-  	mount -n -t unionfs -o dirs=${rwdir}/uniontmp:/rorootfs=${nfsro}ro \
-	none /mnt
-  elif [ "$union_type" == "AUFS" ]; then
-	mount -n -t aufs -o br:/${rwdir}/uniontmp:/rorootfs=ro none /mnt
-  fi
-  mkdir -p /mnt/uniontmp
-  mount -n --move ${rwdir}/uniontmp /mnt/uniontmp
-  chmod 0755 /mnt/uniontmp /mnt
-  # run ldconfig if switched on via kernel command line (token ldsc) or
-  # triggered by unionized root filesystem
-  ldcfg
-  # runlevel directories should contain no links
-  for i in ${D_RCDIRS} ${D_INITBOOTD} ; do
-    rm -f /mnt/etc/$i/* 2>/dev/null
-  done
-elif [ -z "${cowloop}" ] ; then
-  echo "Using bind mounts to ramdisk for rw access"
-  mount -n -t tmpfs -o size=${tmpfssize} ramfs ${rwdir}
-  for path in ${D_BINDMPTS} ; do
-    mkdir -p ${rwdir}/${path} >/dev/null 2>&1
-    mount -n --bind ${rwdir}/${path} /mnt/${path}
-    [ ${DEBUGLEVEL} -gt 1 -a ${DEBUGLEVEL} != 8 ] && \
-      echo "Created ${rwdir}/${path} and mounted it to /mnt/$path"
-  done
-  # see above ...
-  ldcfg
-  # save the RO directories mentioned in the distro-specific
-  # config to a temporary directory. They will lateron be restored
-  for path in ${D_RODIRSINRW}; do
-    if [ -d /mnt/${path} ] ; then
-      list=${path}" "${list}
-      # exclude them from etc copy process too
-      echo ${path}|sed -e "s,/root/,," >>/tmp/etc.exclude
-      mkdir -p /root/${path} >/dev/null 2>&1
-      mount -n --bind /mnt/${path} /root/${path} >/dev/null 2>&1
-    fi
-  done
-  for path in /etc/${D_SYSCONFDIR} ${D_DIRINBINDMNT} ${list}; do
-    mkdir -p ${rwdir}/${path}
-  done
-  testmkd ${rwdir}/var/tmp
-  chmod a+rwxt ${rwdir}/var/tmp >/dev/null 2>&1
-  # exclude all sysv runlevel link stuff
-  for i in ${D_RCDIRS} ${D_INITBOOTD} ; do
-    echo "*$i/*" >>/tmp/etc.exclude
-  done
-  # add list of files to be excluded and common excludes to the filter list
-  echo -e "${D_ETCEXCL}\n@@@COMETCEXCL@@@" >>/tmp/etc.exclude
-  # if ld.so.cache is to be generated then do not copy the file
-  [ -n "${ldsc}" ] && echo -e "ld.so.cache*" >>/tmp/etc.exclude
-  # for tar exclude lists might be used, more difficult for cp
-  cd /mnt
-  tar -X /tmp/etc.exclude -cp etc/*|tar -xp -C ${rwdir} 2>/dev/null
-  cd /
-  mount -n --bind ${rwdir}/etc /mnt/etc
-  mount -n --bind ${rwdir}/var /mnt/var
-  # get the "covered" mounts back into filesystem structure
-  for path in ${list}; do
-    mount -n --move /root/$path /mnt/$path #>>$LOGFILE 2>&1
-  done
-  #rm -rf /root/* >/dev/null 2>&1
-  # run some specific stuff !?
-fi
-
-# splashy stuff
-[ $DEBUGLEVEL = 0 ] && /bin/splashy_update "progress 40" 2>/dev/null
-
-# script for stuff to execute during early bootup
-d_mkrlscript init boot.slx "Running configuration postponed from InitRamFS"
-echo "fs complete at $(sysup)" >/tmp/fscmpl
-
-# write debug file information after filesystem setup completed
-echo -e "# /etc${D_SYSCONFDIR}/logfile - file created by $0 (initramfs \
-from $date)\n#\n# logfile \
-for linux diskless client specific debugging output\nLOGFILE=\"$LOGFILE\"\n#\
-\n# debug level\nDEBUGLEVEL=\"$DEBUGLEVEL\"" \
-  > /mnt/etc/${D_SYSCONFDIR}/logfile || error "$init_errlog"
-
-# run distribution independent and dependent configuration of files and
-# services (offer debug shell in runlevel 22)
-if [ ${DEBUGLEVEL} = 22 ] ; then
-  /bin/sh
-else
-  servconfig &
-fi
-
-# splashy stuff
-[ $DEBUGLEVEL = 0 ] && /bin/splashy_update "progress 50" 2>/dev/null
-
-for path in @@@COMDIRINDXS@@@ ${D_DIRINDXS} ${D_DIRINBINDMNT} ; do
-  testmkd /mnt/${path}
-done
-# Needed writable subdirs nested in readonly subdirs of writable one
-for path in ${D_RWDIRSINRO}; do
-  mount -n -t tmpfs none /mnt/${path}
-done
-for i in /var/run/utmp /var/log/wtmp /var/log/lastlog /etc/mtab ; do
-  echo -n > /mnt/$i
-done
-chown 65534:0 /mnt/var/lib/nobody
-# /proc/bus/usb might be deprecated in newer kernels ...
-echo -e "# /etc/fstab - file generated by $0 (initramfs from $date)\n#\
-\tDirk von \
-Suchodoletz, dirk@goe.net\n\nrootfs\t\t/\t\trootfs\t\tro\t\t 0 0\n\
-proc\t\t/proc\t\tproc\t\tdefaults\t 0 0\ninitramdevs\t/dev\t\ttmpfs\
-\t\trw\t\t 0 0\ndevpts\t\t/dev/pts\tdevpts\t\tmode=0620,gid=5\t 0 0" \
-  >/mnt/etc/fstab || error "$init_fstab"
-echo -e "rootfs / rootfs rw 0 0\ninitramdevs /dev tmpfs rw\
- 0 0" > /mnt/etc/mtab
-
-# splashy stuff
-[ $DEBUGLEVEL = 0 ] && /bin/splashy_update "progress 60" 2>/dev/null
-
-# copy library cache if generated
-if [ -n "${ldsc}" ] ; then
-  # creating library cache takes a while ...
-  if waitfor /tmp/ldcfg 50000 ; then
-    test -s /mnt/tmp/ld.so.cache && \
-      mv /mnt/tmp/ld.so.cache /mnt/etc/ld.so.cache
-  else
-    error "$init_errldcfg"
-  fi
-else
-  error "$init_infldcfg" nonfatal
-fi
-# wait a while for hardware setup to complete and copy stuff to stage4
-waitfor /tmp/hwcfg 20000 || error "$init_errhw"
-[ -f /tmp/scanner-udev ] && cat /tmp/scanner-udev \
-  >> /mnt/etc/udev/rules.d/04-scanner.rules
-# wait for completion of Xorg configuration and finalize it
-waitfor /tmp/xready 10000 || error "$init_errxorg" nonfatal
-mv /etc/xorg.conf /mnt/${D_XF86CONFFILE}
-# wait a while for services setup to complete
-waitfor /tmp/svcfg 10000 || error "$init_errsw"
-# IP configuration is complete and should not be updated automatically
-killall -9 dhcpcd dhclient udhcpc 2>/dev/null
-# copy machine configuration file into stage4 filesystem
-mv /etc/machine-setup /mnt/etc
-
-# if uniondirs is not set yet, maybe the unions were given via machine-setup
-if [ -z "$uniondirs" ]; then
-  if [ "$union_type" == "AUFS" ]; then
-    # does it contain "://"?
-    if [ "$aufs" != "${aufs#*://}" ]; then
-      uniondirs="$aufs"
-    fi
-  elif [ "$union_type" == "UnionFS" ]; then
-    # does it contain "://"?
-    if [ "$unionfs" != "${unionfs#*://}" ]; then
-      uniondirs="$unionfs"
-    fi
-  fi
-fi
-# if locations are given that should be unioned with the fs root, do it
-if [ -n "$uniondirs" ]; then
-  include_in_fsroot_union "$union_type" "$uniondirs"
-fi
-
-# check for any plugin-specific runlevel scripts and run them, if found:
-if [ -d /initramfs/plugin-init.d ]; then
-  for plugin_starter in /initramfs/plugin-init.d/*; do
-	[ $DEBUGLEVEL -gt 0 ] && \
-      echo "Running plugin starter $plugin_starter ..."
-    /bin/sh $plugin_starter
-  done
-fi
-
-# splashy stuff
-[ $DEBUGLEVEL = 0 ] && /bin/splashy_update "progress 70" 2>/dev/null
-
-# post init for some distro specific
-postinit
-[ -s /initramfs/postinit.local ] && {
-  mv /initramfs/postinit.local /bin/postinit.local;
-  chmod u+x /bin/postinit.local; }
-[ -f /bin/postinit.local ] && {
-  [ $DEBUGLEVEL -gt 0 ] && \
-    echo "Running postinit.local - if boot stops here, check the script!"
-  /bin/postinit.local; }
-
-# start a debug shell in higher debug levels
-[ $DEBUGLEVEL -gt 2 -a $DEBUGLEVEL != 8 ] && /bin/sh
-
-# unmount the bind mounted modules directory
-export ticks
-for ticks in 0 1 2 5 10 20 30; do
-  sleep $ticks && umount -n /lib/modules/${KERNEL} 2>/dev/null && break
-  error "$init_wait" nonfatal
-done
-
-# splashy stuff
-[ $DEBUGLEVEL = 0 ] && /bin/splashy_update "progress 80" 2>/dev/null
-
-mount 2>/dev/null | grep /lib/modules/${KERNEL} >/dev/null 2>&1 \
-  && error "$init_errumnt"
-# check for inittab file (might fail for new style init -> upstart)
-test -f /mnt/etc/inittab || test -d /mnt/etc/event.d || error "$init_erritab"
-# close runlevel script for stuff to execute during early bootup
-d_mkrlscript close boot.slx ""
-# put /tmp into stage4 mtab and add stuff to stage4 fstab
-sed -n "s,/mnt,,;/\/tmp /p" /proc/mounts >> /mnt/etc/mtab
-[ -f /tmp/fstab ] && cat /tmp/fstab >> /mnt/etc/fstab
-# preparations to leave initramfs - umounting ...
-umount -n /sys || error "$init_errsys" nonfatal
-umount -n /proc/bus/usb >/dev/null 2>&1
-chmod 1777 /mnt/dev/shm /mnt/tmp /mnt/tmp/scratch 2>/dev/null
-mount -n --move /dev /mnt/dev
-
-# splashy stuff
-[ $DEBUGLEVEL = 0 ] && /bin/splashy_update "progress 90" 2>/dev/null
-
-# kill hwautocfg, servconfig
-killall -9 hwautocfg servconfig 2>/mnt/dev/null
-# runtimer
-[ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 20 ] && \
-  echo "** SLX init ended near $(sysup)"
-# kill the watchdog (autopoweroff, if stage3 init never finishes)
-[ -f /tmp/watchdogpid ] && kill $(cat /tmp/watchdogpid) 2>/mnt/dev/null
-umount -n /proc
-# unset old environment variables
-unset client debug date initrd ip bldroot nfsroot rootfs ticks vci vga
-unset BOOT_IMAGE KCMDLINE KERNEL MODPRV NWMODULES OLDPWD UDEVD_EVENT_TIMEOUT \
-  SLXVERSION UDEVD_EXPECTED_SEQNUM PATH
-
-# splashy stuff
-[ $DEBUGLEVEL = 0 ] && /bin/splashy_update "progress 100" 2>/dev/null
-
-# new style of pivoting (switch_root or run-init)
-exec /bin/switch_root -c dev/console /mnt /sbin/init || error "$init_runinit"
diff --git a/theming/openslx/bootsplash2/mkdxsinitrd b/theming/openslx/bootsplash2/mkdxsinitrd
deleted file mode 100755
index 9f64c524..00000000
--- a/theming/openslx/bootsplash2/mkdxsinitrd
+++ /dev/null
@@ -1,667 +0,0 @@
-#!/bin/bash
-# This program is free software distributed under the GPL version 2.
-# See http://openslx.org/COPYING
-#
-# If you have any feedback please consult http://openslx.org/feedback and
-# send your feedback to feedback@openslx.org
-#
-# General information about OpenSLX can be found at http://openslx.org
-#
-# Main script for generating the InitRamFS of OpenSLX clients, to constitute
-# the Stage3 boot stadium
-
-# debug level of script itself
-DEBUG=1
-# debug level of the initramfs (to trigger the addition of specific
-# binaries and kernel modules)
-IRFSDEBUG=1
-COMETCEXCL="XF86Config*\nissue*\nmtab*\nfstab*\n"
-COMDIRINDXS="/tmp/scratch /var/lib/nobody"
-
-# distro specific settings read from configuration file
-# D_SYSCONFDIR - system wide configuration settings in /etc - sysconfig in
-# SuSE and RedHat, default in Debian and Ubuntu, conf.d in Gentoo
-# D_ETCEXCL - list of files, wildcards to be excluded from /etc when using
-# bind mounts
-# D_DIRINBINDMNT - lists of directories to be created in bind mounted rw
-# part of the client filesystem
-# D_RODIRSINRW - ReadOnly Directories in RW part of filesystem to save on
-# TempFS usage
-# D_DIRINDXS - directories in client filesystem which should be present
-# anyhow
-# D_BINDMNT - any code which is specific in bind mount environment
-# D_RCDIRS - runlevel directories relative to /etc
-# D_HWMODTOIGNORE -
-
-# just ensure that variables are set and the user gets an idea if
-# something fails
-D_SYSCONFDIR="<set in ~/distro-config/distro file>"
-D_ETCEXCL="<set in ~/distro-config/distro file>"
-D_BINDMPTS="<set in ~/distro-config/distro file>"
-D_DIRINBINDMNT="<set in ~/distro-config/distro file>"
-D_RODIRSINRW="<set in ~/distro-config/distro file>"
-D_DIRINDXS="<set in ~/distro-config/distro file>"
-D_BINDMNT="<set in ~/distro-config/distro file>"
-D_INITDIR="<set in ~/distro-config/distro file>"
-D_INITBOOTD="<set in ~/distro-config/distro file>"
-D_RCDIRS="<set in ~/distro-config/distro file>"
-D_RCDIRSINRW="<set in ~/distro-config/distro file>"
-D_INITSCRIPTS="<set in ~/distro-config/distro file>"
-D_XF86CONFFILE="<set in ~/distro-config/distro file>"
-D_XORGBIN="<set in ~/distro-config/distro file>"
-D_XFONTPATH="<set in ~/distro-config/distro file>"
-D_DEFAULTCOUNTRY="<set in ~/distro-config/distro file>"
-# read in the global settings
-SLX_CONFIG_PATH=@@@SLX_CONFIG_PATH@@@
-SLX_SHARE_PATH=@@@SLX_BASE_PATH@@@/share
-[ -f $SLX_SHARE_PATH/settings.default ] && \
-   . $SLX_SHARE_PATH/settings.default
-[ -f $SLX_CONFIG_PATH/settings ] && \
-   . $SLX_CONFIG_PATH/settings
-
-#########################################################################
-# End of global variable declaration, nothing needed to be changed at
-# default below that line
-
-testmkd () {
-  test -d $1 || mkdir -p $1 >/dev/null 2>&1
-}
-
-usage()
-{
-  echo -e "mkdxsinitrd [-C] [-dh] [-k kernel version] [-i path/file] \
-[-f module(s)] [-n module(s)] [-m module(s)] -r path [-s theme]\n\
-[-c initramfs-setup] -S system_name"
-  echo "OPTIONEN"
-  echo "  -C create special initramfs for CD/DVD syslinux demo mode"
-  echo "  -c location of initramfs configuration file (initramfs-setup)"
-  echo "  -d use ISC dhclient instead of udhcpcd of busybox"
-  echo "  -h show usage information"
-  echo "  -k kernel version"
-  echo "  -i path/file optional information where to write initramfs file"
-  echo "  -f list of blockdev/filesystem modules"
-  echo "  -n list of network adaptor modules"
-  echo "  -m list of misc modules not covered by -f or -n"
-  echo "  -r path to stage1 root (vendor OS, e.g. /var/opt/openslx/stage1/suse-..."
-  echo "  -S name of the system for which the initramfs is built"
-  echo "  -s theme (for splash)"
-  echo "  -t tpm support (client security)"
-  echo "  -w enable WLAN support. Put WLAN kernel drivers to the network module"
-  echo "        list"
-  exit 0
-}
-
-# check needed things for installation
-precheck() {
-  # check if running as root
-  if [ "`id -u`" != "0" ]; then
-    echo -e "\nYou don't have the needed permission. Please rerun as root user!\n"
-    exit 1
-  fi
-  # Check for correct settings of SLX-Variables
-  if [ "x" == "x$SLX_BASE_PATH" ]; then
-    if [ "x$SLX_CONFIG_PATH" == "x@@@SLX_CONFIG_PATH@@@" ]; then
-       echo "Please make sure you install the Open SLX Software properly,"
-       echo "i.e. install it using the provided Makefile. Thanks."
-    else
-       echo "Essential configuration is missing. Please verify"
-       echo "existence and correctness of $SLX_SHARE_PATH/settings.default"
-    fi
-    exit 1
-  fi
-}
-
-# replaces which command to find executables inside ROOTDIR
-binfinder()
-{
-local PROGRAM="$1"
-local RET=1
-for ELEMENT in bin sbin usr/bin usr/sbin usr/local/bin \
-               usr/local/sbin usr/bin/X11; do
-  if [ -f "${ROOTDIR}/$ELEMENT/$PROGRAM" ] && \
-     [ -x "${ROOTDIR}/$ELEMENT/$PROGRAM" ]; then
-    printf '%s\n' "${ROOTDIR}/$ELEMENT/$PROGRAM"
-    RET=0
-    break
-  fi
-done
-return $RET
-}
-
-# copy some binary to given destination. Takes binary in $1 and
-# destination in $2
-cobi()
-{
-local DEST=$2
-local FPTB=`binfinder $1`
-if [ -z ${FPTB} ] ; then
-  return 1;
-elif [ -L ${FPTB} ] ; then
-  # do not copy the link but the binary the link points to
-  local LINKDEST=`ls -la ${FPTB} | sed -e "s,.* ,,"`
-  case $LINKDEST in
-    /*) FPTB=${ROOTDIR}${LINKDEST}
-	;;
-    *) ;;
-  esac
-  cp ${FPTB} ${INSTDIR}/${DEST}
-else
-  cp ${FPTB} ${INSTDIR}/${DEST}
-fi
-slxldd --root-path=${ROOTDIR} ${FPTB} >>${INSTDIR}/tmp/libraries
-return 0
-}
-
-# replace copy
-repco()
-{
-local FILENAME=$1
-DATE=`date +%m-%d-%Y`
-# do not forget to define all variables which should be replaced within
-# the start and configuration scripts. All comment lines will be deleted.
-if [ -d ${SLX_SHARE_PATH}/initramfs/${FILENAME} ] ; then
-  testmkd ${INSTDIR}/${FILENAME}
-else
-  if file ${SLX_SHARE_PATH}/initramfs/${FILENAME}| grep "ELF" &>/dev/null ; then
-    cp ${SLX_SHARE_PATH}/initramfs/${FILENAME} ${INSTDIR}/${FILENAME}
-  elif [ -L ${SLX_SHARE_PATH}/initramfs/${FILENAME} ] ; then
-    cp -a ${SLX_SHARE_PATH}/initramfs/${FILENAME} ${INSTDIR}/${FILENAME%/*}
-  else
-	if [ -z ${SLX_VERSION} ] ; then
-		SLX_VERSION=$(slxversion)
-	fi
-    sed -e "s,@@@INSTDIR@@@,${INSTDIR},g;s,@@@KERNVER@@@,${KERNVER},g" \
-        -e "s,@@@DISTRO_NAME@@@,${DISTRO_NAME},g" \
-		-e "s,@@@DISTRO_VER@@@,${DISTRO_VER},g" \
-		-e "s,@@@NETIF@@@,${NET_IF},g" \
-        -e "s,@@@NWMODULES@@@,${NWMODULES},g" \
-        -e "s,@@@COMDIRINDXS@@@,${COMDIRINDXS},g" \
-        -e "s,@@@COMETCEXCL@@@,${COMETCEXCL},g" \
-        -e "s,@@@DATE@@@,${DATE},g;/^#[^!].*/d" \
-          ${SLX_SHARE_PATH}/initramfs/${FILENAME} >> ${INSTDIR}/${FILENAME}
-     # ugly hack for creating a general slx config file instead of "patching"
-     # the stage3 init
-     echo -e "slxconf_date=${DATE}\nslxconf_kernver=${KERNVER}\n\
-slxconf_listnwmod=\"${NWMODULES}\"\nslxconf_distro_name=${DISTRO_NAME}\n\
-slxconf_distro_ver=${DISTRO_VER}\nslxconf_system_name=${SYSTEM_NAME}\n\
-slxconf_slxver=\"${SLX_VERSION}\"" \ > ${INSTDIR}/etc/sysconfig/slxsystem.conf
-     sed -e "s,^#!/bin/sh,#!/bin/ash," -i ${INSTDIR}/${FILENAME}
-  fi
-fi
-}
-
-copy_distro_stuff() {
-  # copy first the default distro dependent configuration (variables) and
-  # function files, then append to each the distro/version specific file
-  # variables, functions set in default might that way be overwritten by
-  # definitions in distro/version specific files
-  cat ${SLX_SHARE_PATH}/distro-specs/$1/config-default >${INSTDIR}/etc/sysconfig/config
-  cat ${SLX_SHARE_PATH}/distro-specs/$1/config-$2 >>${INSTDIR}/etc/sysconfig/config
-  #[ -f $SLX_SHARE_PATH/settings.default ] && \
-  #   cat $SLX_SHARE_PATH/settings.default >>${INSTDIR}/etc/sysconfig/config
-  #[ -f $SLX_CONFIG_PATH/settings ] && \
-  #   cat $SLX_CONFIG_PATH/settings >>${INSTDIR}/etc/sysconfig/config
-  cat ${SLX_SHARE_PATH}/distro-specs/$1/functions-default >${INSTDIR}/etc/distro-functions
-  cat ${SLX_SHARE_PATH}/distro-specs/$1/functions-$2 >>${INSTDIR}/etc/distro-functions
-  # would be cool not to copy .svn here ...
-  # fixme!! works only for etc directories. If dir exists then next copy places
-  # file into the existing dir
-  cp -a distro-specs/$1/files-default ${INSTDIR}/etc/sysconfig/files 2>/dev/null
-  # ... so remove them afterwards ...
-  find ${INSTDIR}/etc/sysconfig/files \
-    -regex ".*/\..*" -exec rm -rf {} 2>/dev/null \;
-}
-# copy kernel modules even if links (first parameter is source, second
-# destination and third source prefix)
-modcp () {
-if [ -L $1 ] ; then
-  cp $3/$(readlink $1) $2
-else
-  cp $1 $2
-fi
-}
-# This function makes the directory of this script to the present working
-# directory
-# Does also work when called by symbolic links (even for nested links).
-goto_script_dir()
-{
-  [ $DEBUG -ge 2 ] && echo "Aufgerufen wurde $0, checking if it is a link"
-  calleddetails=`ls -l $0` # get the file flags (e.g. lrwxrwxrwx)
-  [ $DEBUG -ge 2 ] && echo $calleddetails
-
-  calleddir=${0%/*}  # Strip the filename from path
-  [ $DEBUG -ge 2 ] && echo "Wechsele ins Verzeichnis des aufgerufenen scripts/links ($calleddir)"
-  cd $calleddir
-
-  while index=`expr index "$calleddetails" "l"`;
-        [ $index -eq 1 ]; do
-
-    [ $DEBUG -ge 2 ] && echo "It is a link"
-    target=`echo $calleddetails | awk '{print $NF}'`
-    [ $DEBUG -ge 2 ] && echo "The target of the link is: $target"
-    hasslash=`expr index "$target" "/"`
-    if [ $hasslash -ne 0 ]; then
-        targetpath=${target%/*} # extract the pathname
-        [ $DEBUG -ge 2 ] && echo "Following link to $targetpath"
-        cd $targetpath
-    else
-        [ $DEBUG -ge 2 ] && echo "It is in the same directory as the link"
-    fi
-    targetfile=`basename $target`
-    [ $DEBUG -ge 2 ] && echo "The target file of the link is: $targetfile"
-    calleddetails=`ls -l $targetfile` # get the file flags (e.g. lrwxrwxrwx)
-    [ $DEBUG -ge 2 ] && echo $calleddetails
-  done
-  [ $DEBUG -ge 2 ] && pwd
-
-}
-
-# add a bootsplash image to the initial ramdisk, only SuSE at the moment
-# theming
-add_theme() {
-
-#theme="${theme}"
-#themes_dir="${SLX_SHARE_PATH}/themes/${theme}/bootsplash"
-
-# kdm/Xdialog theme
-cp -a ${themes}* ${INSTDIR}/usr/share/themes
-}
-
-
-#########################################################################
-# End of function declaration
-
-while getopts :Cdhk:c:i:r:o:s:f:n:m:S:tu:wI:a: a ; do
-  case $a in
-    \:|\?)
-    case $OPTARG in
-      c)  echo "-c requires location of initramfs-setup file";;
-      k)  echo "-k requires kernel version parameter";;
-      i)  echo "-i requires initramfs path parameter";;
-      f)  echo "-f requires file system module (list) parameter";;
-      n)  echo "-n requires network module (list) parameter";;
-      m)  echo "-m requires misc module (list) parameter";;
-      r)  echo "-r requires root dir parameter";;
-      s)  echo "-s may require theme name";;
-      I)  echo "-I requires network interface parameter";;
-      S)  echo "-S requires the system name";;
-      V)  echo "-V requires an executable to run inside linuxrc";;
-      *)  echo "Unknown option: -$OPTARG"
-          echo "Try mkinitrd -h";;
-    esac
-    exit 1
-    ;;
-    C)  cdboot=1;;
-    c)  CLCONFFILE=$OPTARG;;
-    d)  use_dhclient=1;;
-    k)  KERNVER=$OPTARG;;
-    i)  INITRD_PATH=$OPTARG;;
-    f)  FSMODULES=$OPTARG;;
-    n)  NWMODULES=$OPTARG;;
-    m)  MISCMODULES=$OPTARG;;
-    r)  ROOTDIR=$OPTARG;;
-    s)  theme=$OPTARG;;
-    S)  SYSTEM_NAME=$OPTARG;;
-    t)  use_tpm=1;;
-    w)  enable_wlan=1;;
-    d)  IRFSDEBUG=$OPTARG;;
-    l)  local_init_script="$OPTARG";; # use for pre/postinit.local?
-    h)  usage;;
-  esac
-done
-shift $(expr $OPTIND - 1)
-
-
-#########################################################################
-# End of parameter, argument interpretation
-
-# Check for superuser id
-precheck
-#Change to the directory this script is located in
-goto_script_dir
-
-if [ -z "$ROOTDIR" ] ; then
-  echo "No ROOTDIR given - please use the -r flag! Exiting..."
-  exit 1
-fi
-if [ -z "$SYSTEM_NAME" -a -z "$cdboot" ] ; then
-  echo "No system name given - please use the -S flag! Exiting..."
-  exit 1
-fi
-# set temporary setup directory, clean it and setup basic directory
-# structure
-if [ -z "$INSTDIR" ] ; then
-  INSTDIR=/tmp/slx-tmpramfs
-fi
-rm -rf ${INSTDIR}
-mkdir -p ${INSTDIR}/{dev,proc,tmp,mnt,root,bin,sys,lib}
-mkdir -p ${INSTDIR}/var/{lib,run} ${INSTDIR}/var/lib/nfs/state
-ln -s /bin ${INSTDIR}/sbin
-mkdir -p ${INSTDIR}/usr/share
-# needed for KNOPPIX hwsetup tool not to be confused with ${D_SYSCONFDIR}
-mkdir -p ${INSTDIR}/etc/sysconfig
-
-# slx init or cdboot init 
-if [ -z "$cdboot" ] ; then
-  # set DISTRO_NAME & DISTRO_VER from ROOTDIR:
-  VENDOR_OS=$(basename $ROOTDIR)
-  DISTRO_NAME=${VENDOR_OS%%-*}
-	# select distro type
-  DISTRO_VER=${VENDOR_OS#*-}
-	# drop distro type, keep from version onwards
-  DISTRO_VER=${DISTRO_VER%%-*}
-	# remove any optional stuff after version
-  DISTRO_VER=${DISTRO_VER%%_*}
-	# remove any architecture specification after version
-  copy_distro_stuff ${DISTRO_NAME} ${DISTRO_VER}
-
-  # initial ramdisk scripts: init, functions, servconfig, hwautocfg, ...
-  # copy and replace variable names
-  for dirs in `find ${SLX_SHARE_PATH}/initramfs/* ! -regex ".*/\..*"` ; do
-    repco ${dirs##*initramfs/}
-  done
-  chmod 755 ${INSTDIR}/init \
-    ${INSTDIR}/bin/{servconfig,hwautocfg,screenres,dhcpmkconfig}
-else
-  cp ${SLX_SHARE_PATH}/cdboot/init ${INSTDIR}/init
-  chmod 755 ${INSTDIR}/init
-fi
-
-# quickhack architecture detection of target system
-if [ -d ${ROOTDIR}/lib64 ] ; then
-  ARCH=x86_64
-else
-  ARCH=i586
-fi
-
-# copy the proper busybox depending on architecture (i586 for 32bit and
-# x86_64 for 64bit)
-# fixme: At the moment the busybox does not support ext2 filesystem tools
-cp ${SLX_SHARE_PATH}/busybox/busybox.${ARCH} ${INSTDIR}/bin/busybox
-slxldd --root-path=${ROOTDIR} ${INSTDIR}/bin/busybox >>${INSTDIR}/tmp/libraries
-for bbins in [ ar arping ash bunzip2 cat chmod chown chroot cp cpio cut \
-    date dd df dmesg du echo env expr fdisk free grep gunzip hwclock \
-    insmod id ip kill killall ln ls lsmod mdev mkdir \
-    mknod mkswap modprobe mount mv nice ping printf ps rdate \
-    rm rmmod sed sleep sort swapoff swapon switch_root tar test tftp \
-    time touch tr udhcpc umount uptime usleep vconfig vi wget zcat zcip; do
-  ln -fs /bin/busybox ${INSTDIR}/bin/$bbins
-done
-# fake the sh link in busybox environment
-echo -e "#!/bin/ash\n/bin/ash \$@" > ${INSTDIR}/bin/sh
-chmod a+x ${INSTDIR}/bin/sh
-
-# binaries useful for debugging purposes
-if [ $IRFSDEBUG -gt 2 ] ; then
-  for bbins in \
-    strace
-  do
-    cobi ${bbins} bin || echo "Program ${bbins} not found"
-  done
-fi
-
-# slx init or cdboot init 
-if [ -z "$cdboot" ] ; then
-  # one of the dhcp clients (do we really need any other dhcp client?)
-  if [ -n "${use_dhclient}" ] ; then
-    if binfinder dhclient ; then
-      cobi dhclient bin
-      if [ "$DISTRO_NAME" = "ubuntu" ] ; then
-        #Dhclient auf Ubu 6.10 streikt ohne libnss_compat
-        echo "/lib/libnss_compat.so.2" >> ${INSTDIR}/tmp/libraries
-        echo "/lib/libnsl.so.1" >> ${INSTDIR}/tmp/libraries
-      fi
-    else
-      echo "dhclient is not available"
-    fi
-  fi
-
-  # if nbd or dnbd is used as clients root filesystem
-  if [ -n "${FSMODULES}" ] ; then
-  for i in ${FSMODULES}; do
-    case "$i" in
-      dnbd)
-        cobi dnbd-client bin
-      ;;
-      nbd)
-        cobi nbd-client bin
-      ;;
-    esac
-  done
-  fi
-  # if tpm should be used within InitRamFS ...
-  if [ -n "${use_tpm}" ] ; then
-    MISCMODULES="${MISCMODULES} tpm"
-    # copy the other stuff
-  fi
-  # if unionfs
-  cobi unionctl bin &>/dev/null || \
-    echo "Program unionctl not found; could be ignored ..."
-
-  # if cowloop
-  cobi cowdev bin &>/dev/null || \
-    echo "Program cowdev not found; could be ignored ..."
-
-  # if iscsi (or just with modules)??
-  # cobi iscsiadm iscsid bin &>/dev/null || \
-  #  echo "Program iscsid not found; could be ignored ..."
-
-  # distro specific additional stuff
-  case "${DISTRO_NAME}" in
-    debian*)
-      cp ${ROOTDIR}/lib/libnss_compat.so.2 ${INSTDIR}/lib;;
-  esac
-  # add libpci.so to the libraries, as we are going to copy it manually:
-  slxldd --root-path=${ROOTDIR} ${SLX_SHARE_PATH}/initramfs/lib/libpci.so.2 \
-    >>${INSTDIR}/tmp/libraries
-else
-  # fast kernel switch tool
-  cobi kexec bin
-fi
-  
-# if wlan should be supported in stage3
-if [ -n "${enable_wlan}" ] ; then
-  cobi iwconfig bin
-fi
-  
-# now copy all libraries that have been determined to be required:
-# first we handle all 64-bit libs...
-for lib in $(fgrep /lib64/ ${INSTDIR}/tmp/libraries 2>/dev/null|sort -u); do
-  if ! [ -d ${INSTDIR}/lib64 ] ; then
-    mkdir ${INSTDIR}/lib64
-  fi
-  cp ${lib} ${INSTDIR}/lib64
-done
-# ...now copy 32-bit libs:
-for lib in $(fgrep -v /lib64/ ${INSTDIR}/tmp/libraries 2>/dev/null|sort -u); do
-  cp ${lib} ${INSTDIR}/lib
-done
-rm -f ${INSTDIR}/tmp/libraries
-
-# add kernel modules and dependency files
-if [ -z "$KERNVER" ] ; then
-  KERNVER=$(ls -l ${ROOTDIR}/boot/vmlinuz | grep vmlinuz | sed "s/.*vmlinuz-//")
-fi
-if [ -z "$KERNVER" ] ; then
-  KERNVER=$(ls -l ${ROOTDIR}/vmlinuz | grep vmlinuz | sed "s/.*vmlinuz-//")
-fi
-# if no vmlinuz found, go for vmlinuz-x.yz.uv...
-if [ -z "$KERNVER" ] ; then
-  KERNVER=$(ls -lt ${ROOTDIR}/boot/vmlinuz* | grep vmlinuz | \
-    sed -n "1,1s/.*vmlinuz-//p")
-  echo "No vmlinuz-link found. Using kernel version "$KERNVER
-fi
-
-if [ -z "$KERNVER" ] ; then
-  echo "No kernel version set or detected - please use the -k flag! Exiting..."
-  exit 1
-fi
-if [ -z "$INITRD_PATH" ] ; then
-  INITRD_PATH="/tmp/slxinitramfs.gz"
-fi
-if [ -z "$NWMODULES" ] ; then
-    #NWMODULES="forcedeth e1000 e100 tg3 via-rhine r8169 pcnet32 8139too 8139cp"
-    NWMODULES="forcedeth e1000 e100 tg3 3c59x via-rhine r8169 pcnet32 b44 8139too"
-fi
-# slx init or cdboot init 
-if [ -z "$cdboot" ] ; then
-  # base filesystem modules
-  if [ -z "$FSMODULES" ] ; then
-    FSMODULES="nbd squashfs nfs"
-  fi
-  # put all needed modules into initial ramdisk
-  mkdir -p ${INSTDIR}/lib/modules/${KERNVER}
-  for module in af_packet unix ${NWMODULES} ${FSMODULES} ${MISCMODULES} \
-    ${DEBUGMODULES} usbcore hid usbhid uhci-hcd ohci-hcd; do
-    mod=$(cd /${ROOTDIR}; find "lib/modules/${KERNVER}" -name ${module}.ko \
-2>/dev/null)
-
-    if [ -n "$mod" ] ; then
-      mpath=${INSTDIR}/${mod%/*}
-      mkdir -p ${mpath}
-      # specific function which can follow a link
-      modcp ${ROOTDIR}/$mod ${mpath} ${ROOTDIR}
-      # fixmee!! selection of dependent modules could be handled a little bit
-      # more clever
-      rdirprefix="${ROOTDIR}/lib/modules/${KERNVER}/kernel"
-      ddirprefix="${INSTDIR}/lib/modules/${KERNVER}/kernel"
-      case "$module" in
-        e100|8139too|via-rhine|sis900|epic100|sundance|8139cp|eepro100|pcnet32)
-          cp ${rdirprefix}/drivers/net/mii.ko \
-             ${ddirprefix}/drivers/net &>/dev/null
-        ;;
-        # WLAN module block
-        #ipw3945|...)
-        # cp ${rdirprefix}/net/wireless ...
-        #;;
-        ath_pci)
-          for wlanmodule in ath_rate_sample ath_hal wlan wlan_scan_sta ; do
-            mod=$(cd /${ROOTDIR}; find "lib/modules/${KERNVER}" \
-              -name ${wlanmodule}.ko 2>/dev/null)
-            mkdir -p ${INSTDIR}/${mod%/*}
-            # specific function which can follow a link
-            modcp ${ROOTDIR}/$mod ${INSTDIR}/${mod%/*} ${ROOTDIR}
-          done
-        ;;
-        # for unsupported WLAN devices
-        ndiswrapper)
-          cp -a ${ROOTDIR}/etc/ndiswrapper ${INSTDIR}/etc
-        ;;
-        nfs)
-          # create directory structure for modules needed and copy them
-          # to the proper place (as expected by modprobe/modules.dep)
-          mkdir -p ${ddirprefix}/net/sunrpc
-	  mkdir -p ${ddirprefix}/fs/lockd ${ddirprefix}/fs/nfs_common
-          cp ${rdirprefix}/net/sunrpc/sunrpc.ko \
-            ${ddirprefix}/net/sunrpc &>/dev/null
-          cp ${rdirprefix}/fs/lockd/lockd.ko \
-            ${ddirprefix}/fs/lockd &>/dev/null
-          cp ${rdirprefix}/fs/nfs_common/nfs_acl.ko \
-	    ${ddirprefix}/fs/nfs_common &>/dev/null
-        ;;
-        ext3)
-          # needed for ext2 support
-          mkdir -p ${ddirprefix}/fs/jbd
-          cp ${rdirprefix}/fs/jbd/jbd.ko \
-            ${ddirprefix}/fs/jbd
-        ;;
-        netloop)
-          # needed for xen stuff
-          cobi brctl bin &>/dev/null || \
-            echo "Program brctl not found; could be ignored ..."
-          mkdir -p ${ddirprefix}/drivers/xen/netback
-          mkdir -p ${ddirprefix}/net/bridge
-          cp ${rdirprefix}/drivers/xen/netback/netloop.ko \
-            ${ddirprefix}/drivers/xen/netback &>/dev/null
-          cp ${rdirprefix}/net/bridge/bridge.ko \
-            ${ddirprefix}/net/bridge &>/dev/null
-        ;;
-        iscsi_tcp)
-          # iscsi modules
-          # cobi cobi iscsiadm iscsid bin &>/dev/null
-          #mkdir -p ${ddirprefix}/drivers/scsi
-          #for i in scsi_mod scsi_transport_iscsi libiscsi iscsi_tcp; do
-          #  cp ${rdirprefix}/drivers/scsi/$i.ko
-          #    ${ddirprefix}/drivers/scsi
-          #done
-        ;;
-        tpm)
-          # tpm module stuff
-        ;;
-        sata_sil|sata_nv|sata_via)
-          # serial ata local disk support
-          mkdir -p ${ddirprefix}/drivers/scsi ${ddirprefix}/drivers/ata
-          cp ${rdirprefix}/drivers/scsi/{scsi,sd}_mod.ko \
-            ${ddirprefix}/drivers/scsi
-          cp ${rdirprefix}/drivers/ata/libata.ko ${ddirprefix}/drivers/ata
-        ;;
-      esac
-    fi
-  done
-  # copy user-supplied preinit files. The client specific one overwrites the
-  # system default one. postinit.local may be part of fileget tgz (in stage3)
-  for cfg in default/initramfs/preinit.local \
-           ${SYSTEM_NAME}/initramfs/preinit.local \
-           default/initramfs/postinit.local \
-           ${SYSTEM_NAME}/initramfs/postinit.local ; do
-    test -f ${SLX_PRIVATE_PATH}/config/$cfg && \
-      cp ${SLX_PRIVATE_PATH}/config/$cfg ${INSTDIR}/bin
-  done
-  # custom hardware configuration files pcitable.local and Cards.local
-  # fixme!! New source for these files (instead of templates)!
-  if [ -f ${SLX_SHARE_PATH}/templates/pcitable.local ] ; then
-    cat ${SLX_SHARE_PATH}/templates/pcitable.local > \
-      ${INSTDIR}/usr/share/hwdata/pcitable.new
-    cat ${INSTDIR}/usr/share/hwdata/pcitable >>\
-      ${INSTDIR}/usr/share/hwdata/pcitable.new
-    mv ${INSTDIR}/usr/share/hwdata/pcitable.new \
-      ${INSTDIR}/usr/share/hwdata/pcitable
-  fi
-  if [ -f ${SLX_SHARE_PATH}/templates/Cards.local ] ; then
-    cat ${SLX_SHARE_PATH}/templates/Cards.local > \
-      ${INSTDIR}/usr/share/hwdata/Cards.new
-    cat ${INSTDIR}/usr/share/hwdata/Cards >>\
-      ${INSTDIR}/usr/share/hwdata/Cards.new
-    mv ${INSTDIR}/usr/share/hwdata/Cards.new \
-      ${INSTDIR}/usr/share/hwdata/Cards
-  fi
-else
-  # just copy the several ethernet drivers
-  mkdir -p ${INSTDIR}/lib/modules/${KERNVER}/kernel/drivers/net
-  for module in af_packet unix ${NWMODULES} mii ; do
-    mod=$(cd /${ROOTDIR}; find "lib/modules/${KERNVER}" -name ${module}.ko \
-2>/dev/null)
-    mpath=${INSTDIR}/${mod%/*}
-    mkdir -p ${mpath}
-    # specific function which can follow a link
-    modcp ${ROOTDIR}/$mod ${mpath} ${ROOTDIR}
-  done
-fi
-  
-cp ${ROOTDIR}/lib/modules/${KERNVER}/modules.* \
-  ${INSTDIR}/lib/modules/${KERNVER}
-
-# add the common default client configuration file - just to ensure to
-# have all major variables defined. 
-echo "## common settings for clients sharing an InitRamFS" \
-  > ${INSTDIR}/etc/initramfs-setup
-if [ -n "${CLCONFFILE}" ] ; then
-  cat ${CLCONFFILE} >>${INSTDIR}/etc/initramfs-setup
-  echo "Using ${CLCONFFILE}"
-elif [ -n "$cdboot" ] ; then
-  echo -e "ramfs_nicmods=\"${NWMODULES}\"\nramfs_kernver=\"${KERNVER}\"" \
-    >>${INSTDIR}/etc/initramfs-setup
-fi
-echo "## end of common initramfs-setup" >>${INSTDIR}/etc/initramfs-setup
-
-#########################################################################
-# End of file copy procedures
-
-[ -n "${theme}" ] && add_theme
-
-# finally create the compressed initial ramdisk cpio archive
-pushd . > /dev/null 2>&1
-  cd ${INSTDIR}
-  find . ! -name "*~" | cpio -H newc --create | gzip -9 > $INITRD_PATH
-popd > /dev/null 2>&1
-
diff --git a/theming/openslx/bootsplash2/snapshot.png b/theming/openslx/bootsplash2/snapshot.png
deleted file mode 100644
index df53b05e..00000000
--- a/theming/openslx/bootsplash2/snapshot.png
+++ /dev/null
diff --git a/theming/openslx/bootsplash2/etc/splashy/themes/openslx/blank.ttf b/theming/openslx/bootsplash2/themes/openslx/blank.ttf
index e69de29b..e69de29b 100644
--- a/theming/openslx/bootsplash2/etc/splashy/themes/openslx/blank.ttf
+++ b/theming/openslx/bootsplash2/themes/openslx/blank.ttf
diff --git a/theming/openslx/bootsplash2/etc/splashy/themes/openslx/openslx.png b/theming/openslx/bootsplash2/themes/openslx/openslx.png
index 1f61180c..1f61180c 100644
--- a/theming/openslx/bootsplash2/etc/splashy/themes/openslx/openslx.png
+++ b/theming/openslx/bootsplash2/themes/openslx/openslx.png
diff --git a/theming/openslx/bootsplash2/etc/splashy/themes/openslx/theme.xml b/theming/openslx/bootsplash2/themes/openslx/theme.xml
index 6b78ba67..6b78ba67 100644
--- a/theming/openslx/bootsplash2/etc/splashy/themes/openslx/theme.xml
+++ b/theming/openslx/bootsplash2/themes/openslx/theme.xml
diff --git a/theming/openslx/displaymanager/snapshot.png b/theming/openslx/displaymanager/snapshot.png
deleted file mode 100644
index f5afd815..00000000
--- a/theming/openslx/displaymanager/snapshot.png
+++ /dev/null
diff --git a/theming/openslx/pxe/default.example b/theming/openslx/pxe/default.example
deleted file mode 100644
index 981d38e6..00000000
--- a/theming/openslx/pxe/default.example
+++ /dev/null
@@ -1,118 +0,0 @@
-DEFAULT 1.2.3.4::/pxe/vesamenu.c32
-MENU BACKGROUND 1.2.4.4::/pxe/slx-splash.png
-
-PROMPT 0
-NOESCAPE 1
-TIMEOUT 100
-TOTALTIMEOUT 3000
-MENU WIDTH 78
-MENU MARGIN 9
-MENU PASSWORDMARGIN 9
-MENU ROWS 12
-MENU TABMSGROW 18
-MENU CMDLINEROW 18
-MENU ENDROW -1
-MENU PASSWORDROW 18
-MENU TIMEOUTROW 18
-MENU HELPMSGROW 18
-MENU HELPMSGENDROW -1
-MENU HSHIFT 0
-MENU VSHIFT 5
-
-menu color screen 37;40 #80ffffff #00000000 std
-menu color border 37;40 #40000000 #ff3e5d72 std
-menu color title 1;37;40 #ffff8b00 #ff3e5d72 std
-menu color unsel 37;40 #fff0f0f0 #ff3e5d72 std
-menu color hotkey 1;37;40 #ffff8b00 #ff3e5d72 std
-menu color sel 7;37;40 #ff1c2a33 #667799bb all
-menu color hotsel 1;7;37;40 #ffff8b00 #667799bb all
-menu color scrollbar 37;40 #40000000 #ee000000 std
-menu color tabmsg 37;40 #ffff8b00 #ff3e5d72 std
-menu color cmdmark 1;37;40 #ffff8b00 #ff3e5d72 std
-menu color cmdline 37;40 #fff0f0f0 #ff3e5d72 std
-menu color pwdborder 37;40 #40000000 #ff3e5d72 std
-menu color pwdheader 37;40 #ffff8b00 #ff3e5d72 std
-menu color pwdentry 37;40 #ffff8b00 #ff3e5d72 std
-menu color timeout_msg 37;40 #ff1c2a33 #00000000 none
-menu color timeout 1;37;40 #ffff8b00 #00000000 std
-menu color help 37;40 #ff1c2a33 #00000000 none
-menu color msg07 37;40 #90ffffff #00000000 std
-
-MENU MASTER PASSWD secret
-MENU PASSPROMPT Gesicherter Bereich, bitte Passwort eingeben:
-MENU AUTOBOOT Auswahl startet in # Sekunden
-
-MENU TITLE OpenSLX - Hauptmenue
-
-#####
-LABEL Bitte waehlen Sie ueber die Pfeiltasten aus:
-    KERNEL 1.2.3.4::/pxe/vesamenu.c32
-    APPEND 1.2.3.4::/pxe/pxelinux.cfg/default
-
-LABEL ________________________________________________________
-    KERNEL 1.2.3.4::/pxe/vesamenu.c32
-    APPEND 1.2.3.4::/pxe/pxelinux.cfg/default
-#####
-
-LABEL default             # Starte Namen Reihe 27
-    MENU LABEL Beenden :  ^Computer ausschalten
-    MENU DEFAULT
-    KERNEL 1.2.3.4::/pxe/atxoff.com
-
-#####
-LABEL
-    KERNEL 1.2.3.4::/pxe/vesamenu.c32
-    APPEND 1.2.3.4::/pxe/pxelinux.cfg/default
-#####
-
-LABEL test1
-    MENU LABEL Starte  :  ^Testeintrag Nr. 1
-
-    TEXT HELP # Bereich: Reihe 10 - 69
-         Hier kann ein Hilfeintrag stehen welcher z.B. die Besonder-
-         heit einer Umgebung beschreibt. Es sind mehrere Zeilen
-         moeglich (6). Bitte Bereich Reihe 10 - 69 verwenden.
-         Zeilen:
-         5
-         6
-    ENDTEXT
-
-    KERNEL 1.2.3.4::/pxe/vesamenu.c32
-    APPEND 1.2.3.4::/pxe/pxelinux.cfg/default
-
-LABEL test2
-    MENU LABEL Starte  :  Testeintrag ^Nr. 2
-
-    TEXT HELP # Bereich: Reihe 10 - 69
-         Hilfe 2
-    ENDTEXT
-
-    KERNEL 1.2.3.4::/pxe/vesamenu.c32
-    APPEND 1.2.3.4::/pxe/pxelinux.cfg/default
-
-#####
-LABEL ________________________________________________________
-    KERNEL 1.2.3.4::/pxe/vesamenu.c32
-    APPEND 1.2.3.4::/pxe/pxelinux.cfg/default
-LABEL Weiterfuehrende Menues:
-LABEL
-    KERNEL 1.2.3.4::/pxe/vesamenu.c32
-    APPEND 1.2.3.4::/pxe/pxelinux.cfg/default
-#####
-
-LABEL menu
-    MENU LABEL Menue   :  -> ^Weiteres Untermenue
-    KERNEL 1.2.3.4::/pxe/vesamenu.c32
-    APPEND 1.2.3.4::/pxe/pxelinux.cfg/default
-
-#####
-LABEL ________________________________________________________
-    KERNEL 1.2.3.4::/pxe/vesamenu.c32
-    APPEND 1.2.3.4::/pxe/pxelinux.cfg/default
-#####
-
-LABEL hilfe
-    MENU LABEL Hilfe   :  ^H + Enter | Auswahl ueber Pfeiltasten + Enter
-    KERNEL 1.2.3.4::/pxe/vesamenu.c32
-    APPEND 1.2.3.4::/pxe/pxelinux.cfg/default
-
diff --git a/theming/openslx/pxe/snapshot.png b/theming/openslx/pxe/snapshot.png
deleted file mode 100644
index d7fcb53a..00000000
--- a/theming/openslx/pxe/snapshot.png
+++ /dev/null
diff --git a/theming/openslx/pxe/snapshot2.png b/theming/openslx/pxe/snapshot2.png
deleted file mode 100644
index fbdc95aa..00000000
--- a/theming/openslx/pxe/snapshot2.png
+++ /dev/null