diff options
author | Volker Uhrig | 2007-05-14 14:59:24 +0200 |
---|---|---|
committer | Volker Uhrig | 2007-05-14 14:59:24 +0200 |
commit | 8b88f3b308666f2dfda683870fa09489ebe3f5ff (patch) | |
tree | 49ff26aad1d94ebf8db29e3262a2cb0190199b98 /virtualization/templates/nat.conf | |
parent | Minor fixes (diff) | |
download | core-8b88f3b308666f2dfda683870fa09489ebe3f5ff.tar.gz core-8b88f3b308666f2dfda683870fa09489ebe3f5ff.tar.xz core-8b88f3b308666f2dfda683870fa09489ebe3f5ff.zip |
dhcpd.conf and nat.conf for vmware-vmnet8 added
git-svn-id: http://svn.openslx.org/svn/openslx/trunk@1079 95ad53e4-c205-0410-b2fa-d234c58c8868
Diffstat (limited to 'virtualization/templates/nat.conf')
-rw-r--r-- | virtualization/templates/nat.conf | 46 |
1 files changed, 46 insertions, 0 deletions
diff --git a/virtualization/templates/nat.conf b/virtualization/templates/nat.conf new file mode 100644 index 00000000..07d684f0 --- /dev/null +++ b/virtualization/templates/nat.conf @@ -0,0 +1,46 @@ +# Linux NAT configuration file +[host] +# NAT gateway address +ip = 192.168.100.2 +netmask = 255.255.255.0 +# or ip = 172.16.184.2/24 + +# enable configuration; disabled by default for security reasons +#configport = 33445 + +# VMnet device if not specified on command line +device = /dev/vmnet8 + +# Allow PORT/EPRT FTP commands (they need incoming TCP stream...) +activeFTP = 1 + +# Allows the source to have any OUI. Turn this one if you change the OUI +# in the MAC address of your virtual machines. +#allowAnyOUI = 1 + +[udp] +# Timeout in seconds, 0 = no timeout, default = 60; real value might +# be up to 100% longer +timeout = 60 + +[incomingtcp] +# Use these with care - anyone can enter into your VM through these... + +# FTP (both active and passive FTP is always enabled) +# ftp localhost 8887 +#8887 = 172.16.184.128:21 + +# WEB (make sure that if you are using named webhosting, names point to +# your host, not to guest... And if you are forwarding port other +# than 80 make sure that your server copes with mismatched port +# number in Host: header) +# lynx http://localhost:8888 +#8888 = 172.16.184.128:80 + +# SSH +# ssh -p 8889 root@localhost +#8889 = 172.16.184.128:22 + +[incomingudp] +# UDP port forwarding example +#6000 = 172.16.184.128:6001 |