diff options
Diffstat (limited to 'os-plugins/plugins/vmware/OpenSLX/Distro')
-rw-r--r-- | os-plugins/plugins/vmware/OpenSLX/Distro/Base.pm | 185 | ||||
-rw-r--r-- | os-plugins/plugins/vmware/OpenSLX/Distro/Fedora.pm | 3 | ||||
-rw-r--r-- | os-plugins/plugins/vmware/OpenSLX/Distro/Gentoo.pm | 174 | ||||
-rw-r--r-- | os-plugins/plugins/vmware/OpenSLX/Distro/Suse.pm | 207 | ||||
-rw-r--r-- | os-plugins/plugins/vmware/OpenSLX/Distro/Ubuntu.pm | 2 |
5 files changed, 3 insertions, 568 deletions
diff --git a/os-plugins/plugins/vmware/OpenSLX/Distro/Base.pm b/os-plugins/plugins/vmware/OpenSLX/Distro/Base.pm index 51361f31..faa41b97 100644 --- a/os-plugins/plugins/vmware/OpenSLX/Distro/Base.pm +++ b/os-plugins/plugins/vmware/OpenSLX/Distro/Base.pm @@ -44,190 +44,5 @@ sub initialize return 1; } -sub fillRunlevelScript -{ - my $self = shift; - my $location = shift; - my $kind = shift; - -# my $initfile = newInitFile(); -# $initfile->addFunction( -# 'load_modules', -# ' -# # to be filled in via the stage1 configuration script -# insmod /lib/modules/\$(uname -r)/misc/vmmon.ko || return 1 -# insmod /lib/modules/\$(uname -r)/misc/vmnet.ko || return 1 -# insmod /lib/modules/\$(uname -r)/misc/vmblock.ko 2>/dev/null || return 0 -# ' -# {param => "value"} -# ); -# -# $initfile->addFunctionCall( -# 'functionName', -# 'start', # name of block -# {priority => 5, } -# ); -# -# $initfile->addDaemon("/bin/mydaemon"); -# -# my $runlevelscript = getInitFileForDistro($initfile, "ubuntu"); - - my $script = unshiftHereDoc(<<" End-of-Here"); - #!/bin/sh - # completely generic start/stop script, generated via stage1 'vmware' plugin - # install - # inspiration taken from vmware start script: - # Copyright 1998-2007 VMware, Inc. All rights reserved. - # - # This script manages the services needed to run VMware software - - # Basic support for the Linux Standard Base Specification 1.3 - ### BEGIN INIT INFO - # Provides: VMware - # Required-Start: \$syslog - # Required-Stop: - # Default-Start: 2 3 5 - # Default-Stop: 0 6 - # Short-Description: Manages the services needed to run VMware software - # Description: Manages the services needed to run VMware software - ### END INIT INFO - load_modules() { - End-of-Here - - # Load modules - if ($kind eq 'local' || $kind eq 'local25') { - $script .= unshiftHereDoc(<<" End-of-Here"); - # to be filled in via the stage1 configuration script - insmod /lib/modules/\$(uname -r)/misc/vmmon.ko || return 1 - insmod /lib/modules/\$(uname -r)/misc/vmnet.ko || return 1 - insmod /lib/modules/\$(uname -r)/misc/vmblock.ko 2>/dev/null || return 0 - End-of-Here - } elsif ($kind eq 'vmpl1.0') { - $script .= unshiftHereDoc(<<" End-of-Here"); - vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind}/ - module_src_path=\${vmware_kind_path}/vmroot/modules - insmod \${module_src_path}/vmmon.ko - insmod \${module_src_path}/vmnet.ko - End-of-Here - } elsif ($kind eq "vmpl2.0") { - $script .= unshiftHereDoc(<<" End-of-Here"); - vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind}/ - module_src_path=\${vmware_kind_path}/vmroot/modules - insmod \${module_src_path}/vmmon.ko - insmod \${module_src_path}/vmnet.ko - insmod \${module_src_path}/vmblock.ko - End-of-Here - } elsif ($kind eq 'vmpl2.5') { - $script .= unshiftHereDoc(<<" End-of-Here"); - vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind} - module_src_path=\${vmware_kind_path}/vmroot/modules - insmod \${module_src_path}/vmmon.ko - insmod \${module_src_path}/vmnet.ko - insmod \${module_src_path}/vmblock.ko - End-of-Here - } - - # unload modules - $script .= unshiftHereDoc(<<" End-of-Here"); - } - - unload_modules() { - # to be filled with the proper list within via the stage1 - # configuration script - rmmod vmmon vmblock vmnet vmmon 2>/dev/null - - } - End-of-Here - - - # setup vmnet0 and vmnet8 - # depends on specific stage3 setting. I let this if in the code - # because else this whole if-reducing process will become more - # complicated and the code will get less understandable - $script .= unshiftHereDoc(<<" End-of-Here"); - # the bridged interface - setup_vmnet0() { - if [ -n "\$vmnet0" ] ; then - # the path might be directly point to the plugin dir - End-of-Here - if ($kind eq 'vmpl2.5' || $kind eq 'local25') { - $script .= " $location/vmnet-bridge -d /var/run/vmnet-bridge-0.pid -n 0\n"; - } else { - $script .= " $location/vmnet-bridge -d /var/run/vmnet-bridge-0.pid /dev/vmnet0 eth0\n"; - } - $script .= unshiftHereDoc(<<" End-of-Here"); - fi - } - # we definately prefer the hostonly interface for NATed operation too - # distinction is made via enabled forwarding - setup_vmnet1() { - if [ -n "\$vmnet1" ] ; then - # the path might be directly point to the plugin dir - $location/vmnet-netifup -d /var/run/vmnet-netifup-vmnet1.pid \\ - /dev/vmnet1 vmnet1 - dhcpif="\$dhcpif vmnet1" - ip addr add \$vmnet1 dev vmnet1 - ip link set vmnet1 up - if [ -n "\$vmnet1nat" ] ; then - # needs refinement interface name for eth0 is known in stage3 already - echo "1" > /proc/sys/net/ipv4/conf/vmnet1/forwarding 2>/dev/null - echo "1" > /proc/sys/net/ipv4/conf/eth0/forwarding 2>/dev/null - #iptables -A -s vmnet1 -d eth0 - fi - $location/vmnet-dhcpd -cf /etc/vmware/dhcpd-vmnet1.conf -lf \\ - /var/run/vmware/dhcpd-vmnet1.leases \\ - -pf /var/run/vmnet-dhcpd-vmnet1.pid vmnet1 2>/dev/null # or logfile - fi - } - # incomplete ... - setup_vmnet8() { - if [ -n "\$vmnet8" ] ; then - #test -c /dev/vmnet8 || mknod c 119 8 /dev/vmnet8 - $location/vmnet-netifup -d /var/run/vmnet-netifup-vmnet8.pid \\ - /dev/vmnet8 vmnet8 - ip addr add \$vmnet8 dev vmnet8 - ip link set vmnet8 up - # /etc/vmware/vmnet-natd-8.mac simply contains a mac like 00:50:56:F1:30:50 - $location/vmnet-natd -d /var/run/vmnet-natd-8.pid \\ - -m /etc/vmware/vmnet-natd-8.mac -c /etc/vmware/nat.conf 2>/dev/null # or logfile - $location/vmnet-dhcpd -cf /etc/vmware/dhcpd-vmnet8.conf -lf \\ - /var/run/vmware/dhcpd-vmnet8.leases \\ - -pf /var/run/vmnet-dhcpd-vmnet8.pid vmnet8 2>/dev/null # or logfile - fi - } - case \$1 in - start) - echo "Starting vmware background services ..." - # include default directories - . /etc/opt/openslx/openslx.conf - # load the configuration file - . \${OPENSLX_DEFAULT_CONFDIR}/plugins/vmware/vmware.conf - load_modules - setup_vmnet0 - setup_vmnet1 - setup_vmnet8 - ;; - stop) - # message output should match the given vendor-os - echo "Stopping vmware background services ..." - killall vmnet-netifup vmnet-natd vmnet-bridge vmware vmplayer \\ - vmware-tray vmnet-dhcpd 2>/dev/null - # wait for shutting down of interfaces... vmnet needs kinda - # long - sleep 1 - unload_modules - ;; - #status) - # echo "Say something useful here ..." - #;; - restart) - "\$0" stop - "\$0" start - ;; - esac - exit 0 - End-of-Here - return $script; -} 1; diff --git a/os-plugins/plugins/vmware/OpenSLX/Distro/Fedora.pm b/os-plugins/plugins/vmware/OpenSLX/Distro/Fedora.pm index 1c03540f..912bdfa0 100644 --- a/os-plugins/plugins/vmware/OpenSLX/Distro/Fedora.pm +++ b/os-plugins/plugins/vmware/OpenSLX/Distro/Fedora.pm @@ -1,4 +1,4 @@ -# Copyright (c) 2006, 2007 - OpenSLX GmbH +# Copyright (c) 2007..2010 - OpenSLX GmbH # # This program is free software distributed under the GPL version 2. # See http://openslx.org/COPYING @@ -25,6 +25,5 @@ use OpenSLX::Basics; ### interface methods ################################################################################ -# TODO: implement! 1; diff --git a/os-plugins/plugins/vmware/OpenSLX/Distro/Gentoo.pm b/os-plugins/plugins/vmware/OpenSLX/Distro/Gentoo.pm index a57e5c8e..2e1197d8 100644 --- a/os-plugins/plugins/vmware/OpenSLX/Distro/Gentoo.pm +++ b/os-plugins/plugins/vmware/OpenSLX/Distro/Gentoo.pm @@ -25,178 +25,4 @@ use OpenSLX::Basics; ### interface methods ################################################################################ -sub fillRunlevelScript -{ - my $self = shift; - my $location = shift; - my $kind = shift; - - my $script = unshiftHereDoc(<<" End-of-Here"); - #!/sbin/runscript - # Gentoo compatible (hopefully) start/stop script, generated via stage1 'vmware' - # plugin installation - # - # inspiration taken from vmware start script: - # Copyright 1998-2007 VMware, Inc. All rights reserved. - # - # This script manages the services needed to run VMware software - - # dependency definitions - depend() { - # use syslog - # need ... - } - - # helper functions - load_modules() { - End-of-Here - - # load modules - if ($kind eq 'local' || $kind eq 'local25' || $kind eq 'local30') { - if ($kind eq 'local30') { - $script .= unshiftHereDoc(<<" End-of-Here"); - # vmplayer 3.0 specific stuff - insmod /lib/modules/\$(uname -r)/misc/vsock.ko || return 1 - insmod /lib/modules/\$(uname -r)/misc/vmci.ko || return 1 - End-of-Here - } - $script .= unshiftHereDoc(<<" End-of-Here"); - # to be filled in via the stage1 configuration script - insmod /lib/modules/\$(uname -r)/misc/vmmon.ko || return 1 - insmod /lib/modules/\$(uname -r)/misc/vmnet.ko || return 1 - insmod /lib/modules/\$(uname -r)/misc/vmblock.ko 2>/dev/null || return 0 - End-of-Here - } elsif ($kind eq 'vmpl1.0') { - $script .= unshiftHereDoc(<<" End-of-Here"); - vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind}/ - module_src_path=\${vmware_kind_path}/vmroot/modules - insmod \${module_src_path}/vmmon.ko - insmod \${module_src_path}/vmnet.ko - End-of-Here - } elsif ($kind eq "vmpl2.0") { - $script .= unshiftHereDoc(<<" End-of-Here"); - vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind}/ - module_src_path=\${vmware_kind_path}/vmroot/modules - insmod \${module_src_path}/vmmon.ko - insmod \${module_src_path}/vmnet.ko - insmod \${module_src_path}/vmblock.ko - End-of-Here - } elsif ($kind eq 'vmpl2.5') { - $script .= unshiftHereDoc(<<" End-of-Here"); - vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind}/ - module_src_path=\${vmware_kind_path}/vmroot/modules - insmod \${module_src_path}/vmmon.ko - insmod \${module_src_path}/vmnet.ko - insmod \${module_src_path}/vmblock.ko - End-of-Here - } elsif ($kind eq 'vmpl3.0') { - $script .= unshiftHereDoc(<<" End-of-Here"); - vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind}/ - module_src_path=\${vmware_kind_path}/vmroot/modules - insmod \${module_src_path}/vmmon.ko - insmod \${module_src_path}/vmnet.ko - insmod \${module_src_path}/vmblock.ko - insmod \${module_src_path}/vsock.ko - insmod \${module_src_path}/vmci.ko - End-of-Here - } - - # unload modules - $script .= unshiftHereDoc(<<" End-of-Here"); - } - - unload_modules() { - # to be filled with the proper list within via the stage1 - # configuration script - rmmod vmmon vmblock vmnet vmmon vmci vsock 2>/dev/null - } - End-of-Here - - - - # setup vmnet0 and vmnet8 - # depends on specific stage3 setting. I let this if in the code - # because else this whole if-reducing process will become more - # complicated and the code will get less understandable - $script .= unshiftHereDoc(<<" End-of-Here"); - # the bridged interface - setup_vmnet0() { - if [ -n "\$vmnet0" ] ; then - # the path might be directly point to the plugin dir - End-of-Here - if ($kind eq 'vmpl2.5' || $kind eq 'vmpl3.0' || $kind eq 'local25' || $kind eq 'local30') { - $script .= " $location/vmnet-bridge -d /var/run/vmnet-bridge-0.pid -n 0\n"; - } else { - $script .= " $location/vmnet-bridge -d /var/run/vmnet-bridge-0.pid /dev/vmnet0 eth0\n"; - } - $script .= unshiftHereDoc(<<" End-of-Here"); - fi - } - # we definately prefer the hostonly interface for NATed operation too - # distinction is made via enabled forwarding - setup_vmnet1() { - if [ -n "\$vmnet1" ] ; then - #test -c /dev/vmnet1 || mknod c 119 1 /dev/vmnet1 - # the path might be directly point to the plugin dir - $location/vmnet-netifup -d /var/run/vmnet-netifup-vmnet1.pid \\ - /dev/vmnet1 vmnet1 - dhcpif="\$dhcpif vmnet1" - ip addr add \$vmnet1 dev vmnet1 - ip link set vmnet1 up - if [ -n "\$vmnet1nat" ] ; then - # needs refinement interface name for eth0 is known in stage3 already - echo "1" > /proc/sys/net/ipv4/conf/vmnet1/forwarding 2>/dev/null - echo "1" > /proc/sys/net/ipv4/conf/eth0/forwarding 2>/dev/null - #iptables -A -s vmnet1 -d eth0 - fi - $location/vmnet-dhcpd -cf /etc/vmware/dhcpd-vmnet8.conf \\ - -lf /var/run/vmware/dhcpd-vmnet1.leases \\ - -pf /var/run/vmnet-dhcpd-vmnet1.pid vmnet1 2>/dev/null # or logfile - fi - } - # incomplete ... - setup_vmnet8() { - if [ -n "\$vmnet8" ] ; then - $location/vmnet-netifup -d /var/run/vmnet-netifup-vmnet8.pid \\ - /dev/vmnet8 vmnet8 - ip addr add \$vmnet8 dev vmnet8 - ip link set vmnet8 up - # /etc/vmware/vmnet-natd-8.mac simply contains a mac like 00:50:56:F1:30:50 - $location/vmnet-natd -d /var/run/vmnet-natd-8.pid \\ - -m /etc/vmware/vmnet-natd-8.mac -c /etc/vmware/nat.conf 2>/dev/null # or logfile - $location/vmnet-dhcpd -cf /etc/vmware/dhcpd-vmnet8.conf \\ - -lf /var/run/vmware/dhcpd-vmnet8.leases \\ - -pf /var/run/vmnet-dhcpd-vmnet8.pid vmnet8 2>/dev/null # or logfile - fi - } - - # start/stop functions - start() { - ebegin "Starting vmware background services ..." - # include default directories - . /etc/opt/openslx/openslx.conf - # load the configuration file - . \${OPENSLX_DEFAULT_CONFDIR}/plugins/vmware/vmware.conf - load_modules || eerror "The loading of vmware modules failed" - setup_vmnet0 || eerror "Problems setting up vmnet0 interface" - setup_vmnet1 || eerror "Problems setting up vmnet1 interface" - setup_vmnet8 || eerror "Problems setting up vmnet8 interface" - eend $? - } - - stop() { - # message output should match the given vendor-os - ebegin "Stopping vmware background services ..." - killall vmnet-netifup vmnet-natd vmnet-bridge vmware vmplayer \\ - vmware-tray vmnet-dhcpd 2>/dev/null - # wait for shutting down of interfaces. vmnet needs kinda - # long - sleep 1 - unload_modules - eend $? - } - End-of-Here - return $script; -} - 1; diff --git a/os-plugins/plugins/vmware/OpenSLX/Distro/Suse.pm b/os-plugins/plugins/vmware/OpenSLX/Distro/Suse.pm index 7d22c70d..c1b2ecf4 100644 --- a/os-plugins/plugins/vmware/OpenSLX/Distro/Suse.pm +++ b/os-plugins/plugins/vmware/OpenSLX/Distro/Suse.pm @@ -1,4 +1,4 @@ -# Copyright (c) 2008 - OpenSLX GmbH +# Copyright (c) 2008..2010 - OpenSLX GmbH # # This program is free software distributed under the GPL version 2. # See http://openslx.org/COPYING @@ -25,209 +25,4 @@ use OpenSLX::Utils; ### interface methods ################################################################################ -sub fillRunlevelScript -{ - my $self = shift; - my $location = shift; - my $kind = shift; - - my $script = unshiftHereDoc(<<" End-of-Here"); - #!/bin/sh - # SuSE compatible start/stop script, generated via stage1 'vmware' plugin - # installation - # - # inspiration taken from vmware start script: - # Copyright 1998-2007 VMware, Inc. All rights reserved. - # - # This script manages the services needed to run VMware software - - # Basic support for the Linux Standard Base Specification 1.3 - ### BEGIN INIT INFO - # Provides: VMware - # Required-Start: \$syslog - # Required-Stop: - # Default-Start: 2 3 5 - # Default-Stop: 0 6 - # Short-Description: Manages the services needed to run VMware software - # Description: Manages the services needed to run VMware software - ### END INIT INFO - - # helper functions - load_modules() { - End-of-Here - - # Load modules - if ($kind eq 'local' || $kind eq 'local25' || $kind eq 'local30') { - if ($kind eq 'local30') { - $script .= unshiftHereDoc(<<" End-of-Here"); - # vmplayer 3.0 specific stuff - insmod /lib/modules/\$(uname -r)/misc/vsock.ko || return 1 - insmod /lib/modules/\$(uname -r)/misc/vmci.ko || return 1 - End-of-Here - } - $script .= unshiftHereDoc(<<" End-of-Here"); - # to be filled in via the stage1 configuration script - insmod /lib/modules/\$(uname -r)/misc/vmmon.ko || return 1 - insmod /lib/modules/\$(uname -r)/misc/vmnet.ko || return 1 - insmod /lib/modules/\$(uname -r)/misc/vmblock.ko 2>/dev/null || return 0 - End-of-Here - } elsif ($kind eq 'vmpl1.0') { - $script .= unshiftHereDoc(<<" End-of-Here"); - vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind}/ - module_src_path=\${vmware_kind_path}/vmroot/modules - insmod \${module_src_path}/vmmon.ko - insmod \${module_src_path}/vmnet.ko - End-of-Here - } elsif ($kind eq "vmpl2.0") { - $script .= unshiftHereDoc(<<" End-of-Here"); - vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind}/ - module_src_path=\${vmware_kind_path}/vmroot/modules - insmod \${module_src_path}/vmmon.ko - insmod \${module_src_path}/vmnet.ko - insmod \${module_src_path}/vmblock.ko - End-of-Here - } elsif ($kind eq 'vmpl2.5') { - $script .= unshiftHereDoc(<<" End-of-Here"); - vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind}/ - module_src_path=\${vmware_kind_path}/vmroot/modules - insmod \${module_src_path}/vmmon.ko - insmod \${module_src_path}/vmnet.ko - insmod \${module_src_path}/vmblock.ko - End-of-Here - } elsif ($kind eq 'vmpl3.0') { - $script .= unshiftHereDoc(<<" End-of-Here"); - vmware_kind_path=/opt/openslx/plugin-repo/vmware/${kind}/ - module_src_path=\${vmware_kind_path}/vmroot/modules - insmod \${module_src_path}/vmmon.ko - insmod \${module_src_path}/vmnet.ko - insmod \${module_src_path}/vmblock.ko - insmod \${module_src_path}/vsock.ko - insmod \${module_src_path}/vmci.ko - End-of-Here - } - - # unload modules - $script .= unshiftHereDoc(<<" End-of-Here"); - } - - unload_modules() { - # to be filled with the proper list within via the stage1 - # configuration script - rmmod vmmon vmblock vmnet vmmon vmci vsock 2>/dev/null - } - End-of-Here - - # setup vmnet0 and vmnet8 - # depends on specific stage3 setting. A complete rewrite would be - # needed (generation of proper runlevel scripts depending on distro - # and VMware version, see tickets #211, 290) - $script .= unshiftHereDoc(<<" End-of-Here"); - # the bridged interface - setup_vmnet0() { - if [ -n "\$vmnet0" ] ; then - # the path might be directly point to the plugin dir - End-of-Here - if ($kind eq 'vmpl2.5' || $kind eq 'vmpl3.0' || $kind eq 'local25' || $kind eq 'local30') { - $script .= " $location/vmnet-bridge -d /var/run/vmnet-bridge-0.pid -n 0\n"; - } else { - $script .= " $location/vmnet-bridge -d /var/run/vmnet-bridge-0.pid /dev/vmnet0 eth0\n"; - } - $script .= unshiftHereDoc(<<" End-of-Here"); - fi - } - # we definately prefer the hostonly interface for NATed operation too - # distinction is made via enabled forwarding - setup_vmnet1() { - if [ -n "\$vmnet1" ] ; then - # the path might be directly point to the plugin dir - $location/vmnet-netifup -d /var/run/vmnet-netifup-vmnet1.pid \\ - /dev/vmnet1 vmnet1 - dhcpif="\$dhcpif vmnet1" - ip addr add \$vmnet1 dev vmnet1 - ip link set vmnet1 up - if [ -n "\$vmnet1nat" ] ; then - # needs refinement interface name for eth0 is known in stage3 already - # available from \$nwif - echo "1" > /proc/sys/net/ipv4/conf/vmnet1/forwarding 2>/dev/null - echo "1" > /proc/sys/net/ipv4/conf/eth0/forwarding 2>/dev/null - #iptables -A -s vmnet1 -d eth0 - fi - $location/vmnet-dhcpd -cf /etc/vmware/dhcpd-vmnet1.conf \\ - -lf /var/run/vmware/dhcpd-vmnet1.leases \\ - -pf /var/run/vmnet-dhcpd-vmnet1.pid vmnet1 2>/dev/null # or logfile - fi - } - # incomplete ... - setup_vmnet8() { - if [ -n "\$vmnet8" ] ; then - # we don't need the following test. It's handled by - # XX_vmware.sh - #test -c /dev/vmnet8 || mknod c 119 8 /dev/vmnet8 - $location/vmnet-netifup -d /var/run/vmnet-netifup-vmnet8.pid \\ - /dev/vmnet8 vmnet8 - ip addr add \$vmnet8 dev vmnet8 - ip link set vmnet8 up - # /etc/vmware/vmnet-natd-8.mac simply contains a mac like 00:50:56:F1:30:50 - $location/vmnet-natd -d /var/run/vmnet-natd-8.pid \\ - -m /etc/vmware/vmnet-natd-8.mac -c /etc/vmware/nat.conf 2>/dev/null # or logfile - $location/vmnet-dhcpd -cf /etc/vmware/dhcpd-vmnet8.conf \\ - -lf /var/run/vmware/dhcpd-vmnet8.leases \\ - -pf /var/run/vmnet-dhcpd-vmnet8.pid vmnet8 2>/dev/null # or logfile - fi - } - # load the helper stuff - . /etc/rc.status - # reset the script status - rc_reset - - case \$1 in - start) - echo -n "Starting vmware background services ..." - # include default directories - . /etc/opt/openslx/openslx.conf - # load the configuration file - . \${OPENSLX_DEFAULT_CONFDIR}/plugins/vmware/vmware.conf - # hack to access the first serial/parallel port - chmod a+rw /dev/ttyS0 - chmod a+rw /dev/parport0 - load_modules - setup_vmnet0 - setup_vmnet1 - setup_vmnet8 - rc_status -v - ;; - stop) - # message output should match the given vendor-os - echo -n "Stopping vmware background services ..." - killall vmnet-netifup vmnet-natd vmnet-bridge vmware vmplayer \\ - vmware-tray vmnet-dhcpd 2>/dev/null - # wait for shutting down of interfaces. vmnet needs kinda - # long - sleep 1 - unload_modules - # workaround, because we can kill and unload more as we have - # started - rc_reset - rc_status -v - ;; - # we don't need a status yet... at least as long as it is - # unclear in which path the corresponding binary (see original - # /etc/init.d/vmware) is in our case - #status) - # echo -n "Say something useful here ..." - #;; - restart) - "\$0" stop - "\$0" start - ;; - *) - echo "Usage: `basename "\$0"` {start|stop|restart}" - exit 1 - ;; - esac - exit 0 - End-of-Here - return $script; -} - 1; diff --git a/os-plugins/plugins/vmware/OpenSLX/Distro/Ubuntu.pm b/os-plugins/plugins/vmware/OpenSLX/Distro/Ubuntu.pm index d7ffc2e5..922fb34f 100644 --- a/os-plugins/plugins/vmware/OpenSLX/Distro/Ubuntu.pm +++ b/os-plugins/plugins/vmware/OpenSLX/Distro/Ubuntu.pm @@ -1,4 +1,4 @@ -# Copyright (c) 2006, 2007 - OpenSLX GmbH +# Copyright (c) 2007..2010 - OpenSLX GmbH # # This program is free software distributed under the GPL version 2. # See http://openslx.org/COPYING |