summaryrefslogtreecommitdiffstats
path: root/src/initramfs/distro-specs/scilin
diff options
context:
space:
mode:
Diffstat (limited to 'src/initramfs/distro-specs/scilin')
-rw-r--r--src/initramfs/distro-specs/scilin/functions-4.715
-rw-r--r--src/initramfs/distro-specs/scilin/functions-5.342
-rw-r--r--src/initramfs/distro-specs/scilin/functions-5.442
-rw-r--r--src/initramfs/distro-specs/scilin/functions-5.542
-rw-r--r--src/initramfs/distro-specs/scilin/functions-default315
5 files changed, 0 insertions, 456 deletions
diff --git a/src/initramfs/distro-specs/scilin/functions-4.7 b/src/initramfs/distro-specs/scilin/functions-4.7
deleted file mode 100644
index e3ffe443..00000000
--- a/src/initramfs/distro-specs/scilin/functions-4.7
+++ /dev/null
@@ -1,15 +0,0 @@
-# Copyright (c) 2009 - RZ Uni Freiburg
-#
-# This program is free software distributed under the GPL version 2.
-# See http://openslx.org/COPYING
-#
-# If you have any feedback please consult http://openslx.org/feedback and
-# send your feedback to feedback@openslx.org
-#
-# General information about OpenSLX can be found at http://openslx.org
-#
-# Configuration script for Scientific Linux (4.7) to setup linux stateless
-# clients (executed within initial ramfs)
-
-# nothing changed yet from default
-
diff --git a/src/initramfs/distro-specs/scilin/functions-5.3 b/src/initramfs/distro-specs/scilin/functions-5.3
deleted file mode 100644
index 1548ab9a..00000000
--- a/src/initramfs/distro-specs/scilin/functions-5.3
+++ /dev/null
@@ -1,42 +0,0 @@
-# Copyright (c) 2009 - RZ Uni Freiburg
-#
-# This program is free software distributed under the GPL version 2.
-# See http://openslx.org/COPYING
-#
-# If you have any feedback please consult http://openslx.org/feedback and
-# send your feedback to feedback@openslx.org
-#
-# General information about OpenSLX can be found at http://openslx.org
-#
-# Configuration script for Scientific Linux (5.1) to setup linux stateless
-# clients (executed within initial ramfs)
-
-# initial (boot time) runlevel scripts
-initial_boot () {
-# delete all classical disk base rootfs stuff from rc.sysinit
-sed -e "6i# Script modified by $0 during stage3 bootup." \
- -e "/relabel_se/,/^}/d" \
- -e "/# Start up swap/,/# Set up bin/d" \
- -e "/^remount_needed/,/^fi$/d" -e "/^# Clean out/,/in_sysinit/d" \
- -e "/# Mount all o/,/# Start the g/d" \
- -e "/# Boot time/,/# let's/d" -i /mnt/etc/rc.d/rc.sysinit
-# delete all classical disk base rootfs stuff from halt
-sed -e "7i# Modified by $0 during stage3 bootup." \
- -e "/# Save mixer/,/Saving random/d" -e "/quotaoff/,/^# Now halt/d" \
- -i /mnt/etc/init.d/halt
-# boot.slx is a special runlevel script generated within initialramfs which
-# should be executed before the normal runlevel scripts.
-echo -e "# Run OpenSLX init runlevel script\n/etc/init.d/boot.slx" \
- >>/mnt/etc/rc.d/rc.sysinit
-# switch off SElinux enforcing
-sed -e "1i# Configuration modified by $0 during stage3 bootup." \
- -e "s/SELINUX=.*/SELINUX=permissive/" -i /mnt/etc/selinux/config
-# switch off display manager start via inittab
-sed -e "s/x:5:re.*/# line deleted in stage3, re-enable via desktop plugin/" \
- -i /mnt/etc/inittab
-# link halt and reboot scripts
-ln -s ../init.d/killall /mnt/etc/rc.d/rc0.d/S00killall
-ln -s ../init.d/halt /mnt/etc/rc.d/rc0.d/S01halt
-ln -s ../init.d/killall /mnt/etc/rc.d/rc6.d/S00killall
-ln -s ../init.d/halt /mnt/etc/rc.d/rc6.d/S01reboot
-}
diff --git a/src/initramfs/distro-specs/scilin/functions-5.4 b/src/initramfs/distro-specs/scilin/functions-5.4
deleted file mode 100644
index 1548ab9a..00000000
--- a/src/initramfs/distro-specs/scilin/functions-5.4
+++ /dev/null
@@ -1,42 +0,0 @@
-# Copyright (c) 2009 - RZ Uni Freiburg
-#
-# This program is free software distributed under the GPL version 2.
-# See http://openslx.org/COPYING
-#
-# If you have any feedback please consult http://openslx.org/feedback and
-# send your feedback to feedback@openslx.org
-#
-# General information about OpenSLX can be found at http://openslx.org
-#
-# Configuration script for Scientific Linux (5.1) to setup linux stateless
-# clients (executed within initial ramfs)
-
-# initial (boot time) runlevel scripts
-initial_boot () {
-# delete all classical disk base rootfs stuff from rc.sysinit
-sed -e "6i# Script modified by $0 during stage3 bootup." \
- -e "/relabel_se/,/^}/d" \
- -e "/# Start up swap/,/# Set up bin/d" \
- -e "/^remount_needed/,/^fi$/d" -e "/^# Clean out/,/in_sysinit/d" \
- -e "/# Mount all o/,/# Start the g/d" \
- -e "/# Boot time/,/# let's/d" -i /mnt/etc/rc.d/rc.sysinit
-# delete all classical disk base rootfs stuff from halt
-sed -e "7i# Modified by $0 during stage3 bootup." \
- -e "/# Save mixer/,/Saving random/d" -e "/quotaoff/,/^# Now halt/d" \
- -i /mnt/etc/init.d/halt
-# boot.slx is a special runlevel script generated within initialramfs which
-# should be executed before the normal runlevel scripts.
-echo -e "# Run OpenSLX init runlevel script\n/etc/init.d/boot.slx" \
- >>/mnt/etc/rc.d/rc.sysinit
-# switch off SElinux enforcing
-sed -e "1i# Configuration modified by $0 during stage3 bootup." \
- -e "s/SELINUX=.*/SELINUX=permissive/" -i /mnt/etc/selinux/config
-# switch off display manager start via inittab
-sed -e "s/x:5:re.*/# line deleted in stage3, re-enable via desktop plugin/" \
- -i /mnt/etc/inittab
-# link halt and reboot scripts
-ln -s ../init.d/killall /mnt/etc/rc.d/rc0.d/S00killall
-ln -s ../init.d/halt /mnt/etc/rc.d/rc0.d/S01halt
-ln -s ../init.d/killall /mnt/etc/rc.d/rc6.d/S00killall
-ln -s ../init.d/halt /mnt/etc/rc.d/rc6.d/S01reboot
-}
diff --git a/src/initramfs/distro-specs/scilin/functions-5.5 b/src/initramfs/distro-specs/scilin/functions-5.5
deleted file mode 100644
index 1548ab9a..00000000
--- a/src/initramfs/distro-specs/scilin/functions-5.5
+++ /dev/null
@@ -1,42 +0,0 @@
-# Copyright (c) 2009 - RZ Uni Freiburg
-#
-# This program is free software distributed under the GPL version 2.
-# See http://openslx.org/COPYING
-#
-# If you have any feedback please consult http://openslx.org/feedback and
-# send your feedback to feedback@openslx.org
-#
-# General information about OpenSLX can be found at http://openslx.org
-#
-# Configuration script for Scientific Linux (5.1) to setup linux stateless
-# clients (executed within initial ramfs)
-
-# initial (boot time) runlevel scripts
-initial_boot () {
-# delete all classical disk base rootfs stuff from rc.sysinit
-sed -e "6i# Script modified by $0 during stage3 bootup." \
- -e "/relabel_se/,/^}/d" \
- -e "/# Start up swap/,/# Set up bin/d" \
- -e "/^remount_needed/,/^fi$/d" -e "/^# Clean out/,/in_sysinit/d" \
- -e "/# Mount all o/,/# Start the g/d" \
- -e "/# Boot time/,/# let's/d" -i /mnt/etc/rc.d/rc.sysinit
-# delete all classical disk base rootfs stuff from halt
-sed -e "7i# Modified by $0 during stage3 bootup." \
- -e "/# Save mixer/,/Saving random/d" -e "/quotaoff/,/^# Now halt/d" \
- -i /mnt/etc/init.d/halt
-# boot.slx is a special runlevel script generated within initialramfs which
-# should be executed before the normal runlevel scripts.
-echo -e "# Run OpenSLX init runlevel script\n/etc/init.d/boot.slx" \
- >>/mnt/etc/rc.d/rc.sysinit
-# switch off SElinux enforcing
-sed -e "1i# Configuration modified by $0 during stage3 bootup." \
- -e "s/SELINUX=.*/SELINUX=permissive/" -i /mnt/etc/selinux/config
-# switch off display manager start via inittab
-sed -e "s/x:5:re.*/# line deleted in stage3, re-enable via desktop plugin/" \
- -i /mnt/etc/inittab
-# link halt and reboot scripts
-ln -s ../init.d/killall /mnt/etc/rc.d/rc0.d/S00killall
-ln -s ../init.d/halt /mnt/etc/rc.d/rc0.d/S01halt
-ln -s ../init.d/killall /mnt/etc/rc.d/rc6.d/S00killall
-ln -s ../init.d/halt /mnt/etc/rc.d/rc6.d/S01reboot
-}
diff --git a/src/initramfs/distro-specs/scilin/functions-default b/src/initramfs/distro-specs/scilin/functions-default
deleted file mode 100644
index f9bb0f0e..00000000
--- a/src/initramfs/distro-specs/scilin/functions-default
+++ /dev/null
@@ -1,315 +0,0 @@
-# Copyright (c) 2003..2006 - RZ Uni Freiburg
-# Copyright (c) 2006..2010 - OpenSLX GmbH
-#
-# This program/file is free software distributed under the GPL version 2.
-# See http://openslx.org/COPYING
-#
-# If you have any feedback please consult http://openslx.org/feedback and
-# send your feedback to feedback@openslx.org
-#
-# General information about OpenSLX can be found under http://openslx.org
-#
-# configuration script for general Scientific Linux to configure linux
-# stateless clients (included by init, hwautocfg, servconfig within Initial-
-# RamFS after inclusion of the main functions file). This file is the main
-# base for the several RedHat based Scientific Linux versions.
-
-# settings of central variables
-# D_DIRINBINDMNT - lists of directories to be created in bind mounted rw
-# part of the client filesystem
-# D_RODIRSINRW - ReadOnly Directories in RW part of filesystem to save on
-# TempFS usage
-# D_DIRINDXS - directories in client filesystem which should be present
-# anyhow
-D_BINDMPTS="tmp root media home"
-D_DIRINBINDMNT="/var/run /var/log /var/tmp"
-D_RODIRSINRW="/etc/bootsplash /etc/gconf /var/adm /var/lib/texmf /var/lib/rpm \
-/var/cache/fontconfig"
-D_DIRINDXS="/var/lib/rpm /var/lib/nobody /var/lib/alternatives/ /var/db/nscd \
-/var/lib/bluetooth /var/lib/scrollkeeper /var/lib/nfs/sm /var/lib/nfs/sm.bak \
-/var/lib/misc /var/spool/cron"
-
-# empty functions are defined at the beginning of /etc/functions
-
-# distro specific function called from servconfig script
-config_distro () {
- # clean the runlevel directories which will be populated by the stage3 setup
- for dir in rc0.d rc1.d rc2.d rc3.d rc4.d rc5.d rc6.d ; do
- rm -rf /mnt/etc/${dir}/*
- done
- # set some system/environment information
- echo -e "SLX VERSION = $SLXVERSION\nINITRAMFS GENERATION DATE = $date" \
- >>/mnt/etc/redhat-release
- # simple bash configuration for root
- echo -e "# Generated in OpenSLX stage3\n. /etc/bashrc" >/mnt/root/.profile
- # enable sysrq
- sed -e "1i# Configuration modified by $0 during stage3 bootup." \
- -e "s/kernel.sysrq =.*/kernel.sysrq = 1/" -i /mnt/etc/sysctl.conf
- # set some networking stuff if needed
- [ -e /mnt/etc/sysconfig/network ] && \
- sed -e "s/HOSTNAME=.*/HOSTNAME=$host_name/" \
- -e "s/GATEWAY=.*/GATEWAY=$gateway/" -i /mnt/etc/sysconfig/network
- # check for inittab file
- #test -f /mnt/etc/inittab || error "$df_erritab"
-}
-
-# initial (boot time) runlevel scripts
-initial_boot () {
-# delete all classical disk base rootfs stuff from rc.sysinit
-sed -e "6i# Script modified by $0 during stage3 bootup." \
- -e "/# Initialize ha/,/success/d" -e "/^ROOTFSTYPE/,/Remounting root/d" \
- -e "/# Check f/,/Mounting l/d" -e "/^# Configure mach/,/-f \/fastboot/d" \
- -e "s,/sbin/start_udev$,/etc/init.d/udevd," -i /mnt/etc/rc.d/rc.sysinit
-# write a custom udev script (to be checked!!)
-echo -e "#!/bin/sh\n# Simple udev starter script created as a replacement \
-during OpenSLX stage3\n# bootup." >/mnt/etc/init.d/udevd
-echo -e ". /etc/init.d/functions\nSTRING=\$\"Starting udev: \" \
-\necho -n \"\$STRING \"\n/sbin/udevstart </dev/null >/dev/null 2>&1 \
-\n[ \$? -eq 0 ] && success \$\"\$STRING\" || failure \$\"\$STRING\" \
-\nexit 0" >>/mnt/etc/init.d/udevd
-chmod u+x /mnt/etc/init.d/udevd
-# delete all classical disk base rootfs stuff from halt
-sed -e "7i# Modified by $0 during stage3 bootup." \
- -e "/# Save mixer/,/Saving random/d" -e "/quotaoff/,/^# Now halt/d" \
- -i /mnt/etc/init.d/halt
-# boot.slx is a special runlevel script generated within initialramfs which
-# should be executed before the normal runlevel scripts.
-echo -e "# Run OpenSLX init runlevel script\n/etc/init.d/boot.slx" \
- >>/mnt/etc/rc.d/rc.sysinit
-# switch off SElinux enforcing
-sed -e "1i# Configuration modified by $0 during stage3 bootup." \
- -e "s/SELINUX=.*/SELINUX=permissive/" -i /mnt/etc/selinux/config
-# link halt and reboot scripts
-ln -s ../init.d/killall /mnt/etc/rc.d/rc0.d/S00killall
-ln -s ../init.d/halt /mnt/etc/rc.d/rc0.d/S01halt
-ln -s ../init.d/killall /mnt/etc/rc.d/rc6.d/S00killall
-ln -s ../init.d/halt /mnt/etc/rc.d/rc6.d/S01reboot
-}
-
-# linking runlevel scripts
-rllinker () {
-local script="$1"
-if [ $2 -lt 10 ] ; then
- local start="0$2"; else local start="$2"
-fi
-if [ $3 -lt 10 ] ; then
- local stop="0$3"; else local stop="$3"
-fi
-# empty runlevel links - decision on running certain services is passed via
-# configuration
-for i in rc3.d/K$stop$script rc5.d/K$stop$script \
- rc3.d/S$start$script rc5.d/S$start$script ; do
- ln -sf ../init.d/$script /mnt/etc/$i
-done
-}
-
-# group of functions for the normal runlevels - first parameter is start
-# second stop
-# function for ntp configuration
-config_ntp () {
-if [ -e /mnt/etc/init.d/ntpd ] ; then
- if ! strinfile "ntp:" /mnt/etc/passwd ; then
- echo -e "ntp:x:38:38:NTP daemon:/var/lib/ntp:/sbin/nologin" \
- >>/mnt/etc/passwd
- echo -e "ntp:!:13099:0:99999:7:::" >>/mnt/etc/shadow
- fi
- testmkd /mnt/var/lib/ntp ntp:ntp
- if [ "x$start_ntp" = "xyes" ] ; then
- rllinker "ntpd" 7 14
- fi
-fi
-}
-# function for atd
-config_atd () {
-if [ "x$start_atd" = "xyes" ]; then
- rllinker "atd" 14 4
-fi
-}
-# function for configuration of cron services
-config_cron () {
-if [ "x$start_cron" = "xyes" ] ; then
- if [ -f /mnt/etc/init.d/cron ] ; then
- rllinker "cron" 18 2
- testmkd /mnt/var/spool/anacron
- echo -e "# /etc/crontab - file generated by $0:\n\
-" >/mnt/etc/crontab
- else
- error "$df_errcron" nonfatal
- fi
-fi
-}
-# name service caching daemon (useful in most cases)
-config_nscd () {
- if [ -f /mnt/etc/init.d/nscd ] ; then
- testmkd /mnt/var/db/nscd
- rllinker "nscd" 20 5
- fi
-}
-# secure shell service
-config_sshd () {
-if [ "x$start_sshd" = "xyes" ] ; then
- if [ -f /mnt/etc/init.d/sshd ] ; then
- testmkd /mnt/var/empty/sshd/dev
- if ! strinfile "sshd:" /mnt/etc/passwd ; then
- echo -e "sshd:x:74:74::/var/empty/sshd:/sbin/nologin" \
- >>/mnt/etc/passwd
- echo -e "sshd:!:13099:0:99999:7:::" >>/mnt/etc/shadow
- fi
- rllinker "sshd" 25 10
- else
- error "$df_errsshd" nonfatal
- fi
-fi
-}
-# snmp agent for remote monitoring
-config_snmp () {
-if [ "x$start_snmp" = "xyes" ] ; then
- if [ -f /mnt/etc/init.d/snmpd ] ; then
- rllinker "snmpd" 24 2
- testmkd /mnt/var/lib/net-snmp
- fi
- # fixme!!
- # write service monitor depending on services started
- fi
-}
-# configure print server (lpd or cups)
-config_printer () {
-if [ "x${start_printdaemon}" != "x" ] && \
- [ "x${start_printdaemon}" != "xno" ]; then
- case ${start_printdaemon} in
- yes|cups*|CUPS*)
- rllinker "cups" 25 1
- testmkd /mnt/var/spool/cups/tmp root:sys
- ;;
- lp*|LP*|PLP*)
- rllinker "lpd" 25 1
- testmkd /mnt/var/spool/lpd
- ;;
- *)
- #logwrite "Do not know print-server $start_printdaemon; \
- #specify 'cups' or 'lpd'."
- ;;
- esac
-fi
-# configure cups printer client, avoid to overwrite admin provided printer
-# configuration file
-if [ "x$lpr_servers" != "x" ] && [ ! -e /rootfs/etc/cups/client.conf ] ; then
- echo -e "# /etc/cups/client.conf - file generated by\n#\t$0:\n\
-#\t$date\n#\nServerName\t$lpr_servers" >/mnt/etc/cups/client.conf
-fi
-}
-# configure bluetooth services
-config_bt () {
-if [ -e /mnt/etc/sysconfig/bluetooth ] ; then
- sed -e "1i# /etc/sysconfig/bluetooth - file modified by $0" \
- -e "s,HID2HCI_ENABLE.*,HID2HCI_ENABLE=true," \
- -i /mnt/etc/sysconfig/bluetooth
-else
- : # no bluetooth components installed
-fi
-}
-# set up localization like keytable and consolefont
-dlocale () {
-echo -e "\t# entries added by $0: $date" >> /mnt/etc/init.d/boot.slx
-sed -e "s,KEYTABLE=.*,KEYTABLE=\"${KEYTABLE}\"," \
- -i /mnt/etc/sysconfig/keyboard
-#echo -e "\tsetfont ${CONSOLE_FONT} >${LOGFILE} 2>&1\n" \
-# >>/mnt/etc/init.d/boot.slx
-}
-# acpi and powersave daemons, required e.g. to shutdown the machine via
-# power button, no need for early start
-config_acpi () {
-rllinker acpid 01 22
-}
-# configure dbus (inter application communication for kde and gnome), hal
-# (hardware abstraction layer - used e.g. by powersaved) and resmgr
-# (resource manager - the user gets permissions to devices when loggin on)
-# runlevel script for haldaemon is now haldaemon instead of hal
-config_dreshal () {
-local start=4
-local stop=18
-if [ "x$start_dreshal" = "xyes" ]; then
- testmkd /mnt/var/run/dbus
- if [ -f /mnt/etc/init.d/messagebus ] ; then
- testmkd /mnt/var/lib/dbus
- strinfile "dbus:" /mnt/etc/passwd || \
- echo "dbus:x:81:81:System Message Bus:/var/run/dbus:/sbin/nologin" \
- >> /mnt/etc/passwd
- strinfile "dbus:" /mnt/etc/group || echo "dbus:!:81:" >> /mnt/etc/group
- rllinker "messagebus" $start $stop
- fi
- if [ -f /mnt/etc/init.d/haldaemon ] ; then
- testmkd /mnt/var/lib/hal
- strinfile "haldaemon:" /mnt/etc/passwd || \
- echo "haldaemon:x:68:68:User for haldaemon:/var/run/hal:/sbin/nologin" \
- >> /mnt/etc/passwd
- strinfile "haldaemon:" /mnt/etc/group || \
- echo "haldaemon:!:103:" >> /mnt/etc/group
- start=$(($start + 1))
- stop=$(($stop - 1))
- rllinker "haldaemon" $start $stop
- fi
-fi
-}
-# configure automounter (fixme: to be moved into plugin)
-config_automount () {
-if [ -e /mnt/etc/sysconfig/autofs ] ; then
- testmkd /mnt/var/lock/subsys
- sed -e "1i# /etc/sysconfig/autofs - file modified by\n#\t$0:\n#" \
- -e "s,DAEMONOPTIONS.*,DAEMONOPTIONS=\"--timeout 3\"," \
- -i /mnt/etc/sysconfig/autofs
- rllinker "autofs" 18 4
-else
- error "$df_erramt" nonfatal
-fi
-}
-# start name service caching daemon
-config_nscd () {
-if [ -e /mnt/etc/init.d/nscd ] ; then
- testmkd /mnt/var/run/nscd
- rllinker "nscd" 16 16
-else
- error "$df_errnsc" nonfatal
-fi
-}
-# start portmapper (needed at least for nfs and nis services)
-config_portmap () {
- rllinker "portmap" 2 20
-}
-# start NIS (mostly deprecated)
-config_nis () {
-if [ -f /mnt/etc/init.d/ypbind ] ; then
- rllinker "ypbind" 6 16
- config_portmap
- testmkd /mnt/var/yp/nicknames
-else
- error "$df_erryp" nonfatal
-fi
-}
-# initialize runlevel skript to be executed during system startup
-# (before most of the normal boot init scripts)
-# this script should operate like a normal runlevel script
-d_mkrlscript () {
-local switch="$1"
-local name="$2"
-local info="$3"
-case "$1" in
- init)
- echo -e "#!/bin/sh\n# skeleton of /etc/init.d/${name} created \
-by $0\n# after you applied changes to the creation scripts you have to \
-rerun\n# the mkdxsinitrd script to get them applied\n\
-. /etc/rc.d/init.d/functions\n#. /etc/sysconfig/logfile\ncase \
-\"\$1\" in\n start)\n\techo -n \"$info\"" >>/mnt/etc/init.d/${name}
- chmod u+x /mnt/etc/init.d/${name}
- ;;
- entry)
- echo -e "\t${info}" >>/mnt/etc/init.d/${name}
- ;;
- close)
- echo -e "\t;;\n stop)\n\t;;\nesac" \
- >>/mnt/etc/init.d/${name}
- ;;
-esac
-}
-
-
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-11-21 18:55:55 +0100