1 files changed, 448 insertions, 0 deletions
diff --git a/src/os-plugins/plugins/vmware/files/run-virt.include b/src/os-plugins/plugins/vmware/files/run-virt.include
new file mode 100644
index 00000000..2010dc4b
--- /dev/null
+++ b/src/os-plugins/plugins/vmware/files/run-virt.include
@@ -0,0 +1,448 @@
+# run-virt.include
+# -----------------------------------------------------------------------------
+# Copyright (c) 2009..2010 - RZ Uni Freiburg
+# Copyright (c) 2009..2010 - OpenSLX GmbH
+#
+# This program is free software distributed under the GPL version 2.
+# See http://openslx.org/COPYING
+#
+# If you have any feedback please consult http://openslx.org/feedback and
+# send your suggestions, praise, or complaints to feedback@openslx.org
+#
+# General information about OpenSLX can be found at http://openslx.org/
+# -----------------------------------------------------------------------------
+# run-virt.include
+#    - component for vmware/player of the vmchooser plugin run-virt.sh
+################################################################################
+
+# configuration writer functions
+################################################################################
+
+runvmwareconfheader ()
+{
+echo "# This configuration file was generated by $0" >${conffile}
+
+case "$vmversion" in
+  *)
+    svga_autodetect="TRUE"
+    numvcpus="1"
+    shared_folder="FALSE"
+    echo ".encoding = \"UTF-8\"
+# version specific stuff - all versions
+config.version = \"8\"" >>${conffile}
+  ;;
+esac
+case "$vmversion" in
+  2.*|3.*|6.*|7.*)
+    shared_folder="TRUE"
+    echo "
+# version specific stuff - ver. 2.*|3.*|6.*|7.*
+sharedFolder.option = \"alwaysEnabled\"" >>${conffile}
+  ;;
+esac
+case "$vmversion" in
+  2.5|3.*|6.5|7.*)
+    if [ "${cpu_cores}" -ge "2" 2>/dev/null ]; then
+    	numvcpus="2"
+    fi
+    cap3d="TRUE"                    # helper var for loging output
+    echo "
+# version specific stuff - ver. 2.5|3.*|6.5|7.*
+ehci.present = \"TRUE\"
+mks.enable3d = \"${enable3d}\"" >>${conffile}
+  ;;
+esac
+case "$vmversion" in
+  3.*|7.*)
+    numvcpus="${cpu_cores}"
+    # svga_autodetect="FALSE"       # if defined manual, see below
+    echo "
+# version specific stuff - ver. 3.*|7.*
+cpuid.coresPerSocket = \"${cpu_cores}\"
+maxvcpus = \"4\"
+# svga.numDisplays = "2"
+# svga.maxWidth = "2560"
+# svga.maxHeight = "2048"
+# svga.vramSize = "134217728"
+monitor.virtual_mmu = \"automatic\"
+monitor.virtual_exec = \"automatic\"
+floppy1.clientDevice = \"FALSE\"
+floppy1.readonly = \"TRUE\"" >>${conffile}
+  ;;
+esac
+
+echo "
+# id
+virtualHW.version = \"${hwver}\"
+displayName = \"${displayname}\"
+guestOS = \"${vmostype}\"
+
+# CPU/MEM
+numvcpus = \"${numvcpus}\"
+memsize = \"${mem}\"
+MemAllowAutoScaleDown = \"FALSE\"
+MemTrimRate = \"-1\"
+
+# ide-disks
+ide0:0.present = \"${ide}\"
+ide0:0.fileName = \"${diskfile}\"
+ide0:0.mode = \"independent-nonpersistent\"
+ide1:0.present = \"${cdrom0}\"
+ide1:0.autodetect = \"TRUE\"
+ide1:0.fileName = \"auto detect\"
+ide1:0.deviceType = \"cdrom-raw\"
+ide1:1.present = \"${cdrom1}\"
+ide1:1.autodetect = \"TRUE\"
+ide1:1.fileName = \"auto detect\"
+ide1:1.deviceType = \"cdrom-raw\"
+
+# scsi-disks
+scsi0.present = \"${scsi}\"
+scsi0:0.present = \"${scsi}\"
+scsi0:0.fileName = \"${diskfile}\"
+scsi0.virtualDev = \"${hddrv}\"
+scsi0:0.mode = \"independent-nonpersistent\"
+
+# floppies
+floppy0.present = \"${floppy0}\"
+floppy0.startConnected = \"FALSE\"
+floppy0.autodetect = \"TRUE\"
+floppy0.fileName = \"auto detect\"
+# we need floppy b: for our windows client configuration
+floppy1.present = \"${floppy1}\"
+floppy1.startConnected = \"TRUE\"
+floppy1.fileType = \"file\"
+floppy1.fileName = \"${floppy1name}\"
+
+# nics
+ethernet0.present = \"TRUE\"
+ethernet0.addressType = \"static\"
+${network_virtualDev}
+ethernet0.connectionType = \"${network_kind}\"
+#ethernet1.connectionType = \"custom\"
+#ethernet1.vnet = \"/dev/vmnet2\"
+ethernet0.address = \"00:50:56:${VM_ID}:${machostpart}\"
+ethernet0.wakeOnPcktRcv = \"FALSE\"
+
+# sound
+sound.present = \"TRUE\"
+sound.fileName = \"-1\"
+sound.autodetect = \"TRUE\"
+
+# svga
+svga.autodetect = \"${svga_autodetect}\"
+
+# usb
+usb.present = \"TRUE\"
+usb.generic.autoconnect = \"TRUE\"
+
+# shared folders
+sharedFolder0.present = \"TRUE\"
+sharedFolder0.enabled = \"${shared_folder}\"
+sharedFolder0.expiration = \"never\"
+sharedFolder0.guestName = \"${sharename}\"
+sharedFolder0.hostPath = \"${sharepath}\"
+sharedFolder0.readAccess = \"TRUE\"
+sharedFolder0.writeAccess = \"TRUE\"
+sharedFolder.maxNum = \"1\"
+
+# dirs/configs
+tmpDirectory = \"${redodir}\"
+redoLogDir = \"${redodir}\"
+mainMem.useNamedFile = \"TRUE\"
+snapshot.disabled = \"TRUE\"
+tools.syncTime = \"TRUE\"
+isolation.tools.hgfs.disable = \"FALSE\"
+hgfs.mapRootShare = \"TRUE\"
+isolation.tools.dnd.disable = \"FALSE\"
+isolation.tools.copy.enable = \"TRUE\"
+isolation.tools.paste.enabled = \"TRUE\"
+
+# serial port
+serial0.present = \"${serial}\"
+${serialdev}
+
+# parallel port
+parallel0.present = \"${parallel}\"
+parallel0.bidirectional = \"${paralbidi}\"
+${paraldev}" >>${conffile}
+
+# set the appropriate permissions for the vmware config file
+chmod u+rwx ${conffile} >/dev/null 2>&1
+}
+
+preferencesheader ()
+{
+echo ".encoding = \"UTF-8\"
+# This configuration file was generated by $0
+
+# updates/tips
+webUpdate.enabled = \"FALSE\"
+pref.downloadPermission = \"deny\"
+pref.vmplayer.downloadPermission = \"deny\"
+pref.vmplayer.webUpdateOnStartup = \"FALSE\"
+pref.tip.startup = \"FALSE\"
+hints.hideAll = \"TRUE\"
+hint.vmui.showAllUSBDevs = \"FALSE\"
+
+# configs
+prefvmx.defaultVMPath = \"${vmhome}\"
+prefvmx.mru.config = \"${conffile}:\"
+
+# hot keys
+pref.hotkey.control = \"true\"
+pref.hotkey.alt = \"true\"
+pref.hotkey.shift = \"true\"
+pref.hotkey.gui = \"true\"
+gui.restricted = \"true\"
+
+# fullscreen/mouse/keyboard
+pref.fullscreen.toolbarPixels = \"0\"
+pref.vmplayer.fullscreen.autohide = \"TRUE\"
+pref.grabOnMouseClick = \"TRUE\"
+pref.grabOnKeyPress = \"FALSE\"
+pref.motionGrab = \"TRUE\"
+pref.motionUngrab = \"TRUE\"
+pref.hideCursorOnUngrab = \"TRUE\"
+pref.autoFit = \"TRUE\"
+pref.autoFitFullScreen = \"fitGuestToHost\"
+pref.vmplayer.exit.vmAction = \"poweroff\"
+pref.vmplayer.confirmOnExit = \"TRUE\"
+
+# shared folders
+pref.enableAllSharedFolders = \"TRUE\"
+
+# eula
+pref.eula.size = \"2\"
+pref.eula.0.appName = \"VMware Player\"
+pref.eula.0.buildNumber = \"${vmbuild}\"
+pref.eula.1.appName = \"VMware Workstation\"
+pref.eula.1.buildNumber = \"${vmbuild}\"" >${vmhome}/preferences
+}
+
+
+# declaration of default variables
+################################################################################
+
+# VM-ID static (0D), remove if changed to 00
+VM_ID="0D"
+# temporary disk space for logs, etc...
+redodir=/tmp/vmware/${USER}
+# dir for configs and vmem file
+confdir=${redodir}
+# configfile
+conffile="${confdir}/run-vmware.conf"
+# diskfile
+diskfile=${vmpath}
+# users vmware config folder
+vmhome="${HOME}/.vmware"
+
+# get several version infos for vmware/player
+. ${OPENSLX_DEFAULT_CONFDIR}/plugins/vmware/vmware.conf
+vmbuild=$buildversion
+vmversion=$version
+
+# VMware start options
+# "-X": start in fullscreen
+vmopt="-X"
+
+
+# hardware checks
+################################################################################
+
+# use different network card
+if [ -n "${network_card}" ]; then 
+  network_virtualDev='ethernet0.virtualDev = "e1000"'
+else
+  network_virtualDev='# using default virtualDev for ethernet0'
+fi
+
+case "$enable3d" in
+  *true*|*TRUE*|*yes*|*YES*)
+    enable3d="TRUE"
+    ;;
+  *)
+    enable3d="FALSE"
+    ;;
+esac
+
+# serial/parallel port defined (e.g. "ttyS0, lp0" or "autodetect")
+case "$serial" in
+  tty*)
+    serialdev="serial0.filename = \"/dev/${serial}\""
+    serial="TRUE"
+    ;;
+  auto*)
+    serialdev="serial0.autodetect = \"TRUE\""
+    serial="TRUE"
+    ;;
+  *)
+    serialdev="# no serial port configured"
+    serial="FALSE"
+    ;;
+esac
+case "$parallel" in
+  lp*|parport*)
+    paraldev="parallel0.filename = \"/dev/${parallel}\""
+    paralbidi="TRUE"
+    parallel="TRUE"
+    ;;
+  auto*)
+    paraldev="parallel0.autodetect = \"TRUE\""
+    paralbidi="TRUE"
+    parallel="TRUE"
+    ;;
+  *)
+    paraldev="# no parallel port configured"
+    paralbidi="FALSE"
+    parallel="FALSE"
+    ;;
+esac
+
+# adjust memory available for vmware guests
+#if [ -n "${forcemem}" ]; then
+#  mem="${forcemem}"
+#else
+#  case "$vmversion" in
+#    2.*|6.*)
+#      permem=30
+#      ;;
+#    3.*|7.*)
+#      permem=25
+#      ;;
+#  esac
+#  if [ "${totalmem}" -ge "2500" ]; then
+#    permem=40
+#  fi
+#  # check if /tmp is on harddisk
+#  if grep -qe "/dev/.* /tmp " /proc/mounts ; then
+#    permem=60
+#    id44="1"
+#    # Hack, if more than 2,5G RAM use 40% of Ram and write vmem into Ram as well
+#    # (40% vmware | 40% confdir(vmem...) | 20% host
+#    # VMplayer 2+ issue
+#    if [ "${totalmem}" -ge "2500" ]; then
+#      permem=40
+#      confdir=/dev/shm/vmware/$USER
+#      conffile=${confdir}/run-vmware.conf
+#      mkdir -p /dev/shm/vmware/$USER
+#    fi
+#  fi
+#  mem=$(expr ${totalmem} / 100 \* ${permem} / 4 \* 4)
+#  if [ "${id44}" = "1" ]; then
+#    hostmem=$(expr ${totalmem} - ${mem})
+#  else
+#  hostmem=$(expr ${totalmem} - ${mem} - ${mem})
+#  fi
+#fi
+
+# check if ide/scsi and hwver of image
+# read only the first 30 lines to be shure
+imghead=$(head -30 ${diskfile})
+hddrv=$(echo "${imghead}" | grep -m1 -ia "ddb.adapterType" |\
+  awk -F '"' '{print $2}')
+hwver=$(echo "${imghead}" | grep -m1 -ia "ddb.virtualHWVersion" |\
+  awk -F '"' '{print $2}')
+case "${hddrv}" in
+  ide)
+    ide="TRUE"
+    scsi="FALSE"
+    ;;
+  lsilogic|buslogic)
+    ide="FALSE"
+    scsi="TRUE"
+    ;;
+esac
+
+
+# write configuration files
+################################################################################
+
+# create vmware directories
+mkdir -p ${redodir} >/dev/null 2>&1
+mkdir -p ${confdir} >/dev/null 2>&1
+mkdir -p ${vmhome} >/dev/null 2>&1
+
+# create preferences
+preferencesheader
+
+# create VMware startup file
+runvmwareconfheader
+# link to conffile if confdir != redodir
+ln -s ${conffile} ${redodir}/run-vmware.conf >/dev/null 2>&1
+
+# sync is needed to ensure that data is really written to virtual disk
+sync
+
+# own nvram. We need it for floppy drive b, default nvram has just drive a
+# TODO: optimize, currently kinda inefficient, too much copys, but we
+# don't know which one is installed...
+for i in /opt/openslx/plugin-repo/vmware/*; do
+  cp ${i}/nvram ${confdir}/nvram 2>/dev/null
+done
+
+
+# logging and stdout
+################################################################################
+
+# log script information
+writelog "# File created by $0 (VMversion ${vmversion})\n# on $(date)\n"
+writelog "Starting with non-persistent mode ...\n"
+
+# check memory range
+if [ "${mem}" -lt "256" ] || [ "${hostmem}" -lt "256" ]; then
+  writelog "\tMemory out of range: ${mem} MB (guest) / ${hostmem} MB (host)!"
+  writelog "\tMin. 256 MB for host and guest!"
+  exit 1
+fi
+
+# write all results to logfile
+# log disksetup
+writelog "Directories:"
+writelog "\tConfdir:\t${confdir}"
+writelog "\tConffile:\t${conffile}"
+writelog "\tRedodir:\t${redodir}"
+writelog "\tVMhome:\t\t${vmhome}"
+writelog "\t/tmp info: \
+     $(grep "/tmp " /proc/mounts) $(df -h | grep " /tmp$" | awk '{print $2}')"
+# hw setup
+writelog "Hardware:"
+writelog "\tMAC:\t\t00:50:56:${VM_ID}:${machostpart}"
+if [ -n "${network_card}" ]; then
+  writelog "\tNet Adaptor:\t${network_card}"
+fi
+writelog "\tMem:\t\t${mem} MB"
+# echo nur wenn hostmem gesetzt
+[ -n "${hostmem}" ] && writelog "\tHostmem:\t${hostmem} MB"
+writelog "\tMax. res.:\t${xres}x${yres}"
+writelog "\tCD-ROM1:\t${cdrom0}"
+writelog "\tCD-ROM2:\t${cdrom1}"
+writelog "\tFloppy_A:\t${floppy0}"
+if [ "${serial}" = "TRUE" ]; then
+  writelog "\tSerial Port:\t${serialdev}"
+fi
+if [ "${parallel}" = "TRUE" ]; then
+  writelog "\tParallel Port:\t${paraldev}"
+fi
+# image
+writelog "Diskimage:"
+writelog "\tDiskfile:\t${diskfile}"
+writelog "\tDisktype:\t${hddrv}"
+writelog "\tHWVersion:\t${hwver}"
+writelog "\tVMostype:\t${vmostype}"
+# misc
+writelog "Misc:"
+writelog "\tDisplayname:\t${displayname}"
+if [ "${cap3d}" = "TRUE" -a "${enable3d}" = "TRUE" ]; then
+  writelog "\t3D Graphics:\tenabled"
+fi
+# empty line at end
+writelog ""
+
+
+# finally set env for run-virt.sh
+################################################################################
+
+# using the modified version of the wrapper script
+VIRTCMD="${OPENSLX_DEFAULT_BINDIR}/vmplayer"
+VIRTCMDOPTS="${vmopt} ${conffile}"