path: root/initrd/initrd-stuff/init

# functions common for all distros
. /etc/functions || ( echo -e "The functions file contains a lot of script \
functionality. Without this\ninit script will not run." && exit 1 )
# configuration settings (several file and directory variables)
. /etc/sysconfig/config || error "  The distribution \
specific configuration file could not be found"

date
export PATH=/bin:/sbin:/usr/bin/:/usr/sbin
export date="07-01-2006"
exec < /dev/console > /dev/console 2>&1

export KERNEL="@@@KERNVER@@@"
export NWMODULES="@@@NWMODULES@@@"
export DISTRO="@@@DISTRO@@@"

DEVDIR="/dev"
mount -n -t tmpfs -o 'size=25%,mode=0755' initramfsdevs ${DEVDIR}
mkdir -p ${DEVDIR}/pts
mkdir -p ${DEVDIR}/shm
mkdir -p ${DEVDIR}/.udevdb

[ ! -f /proc/cpuinfo ] && mount -n -tproc proc /proc
echo 256 > /proc/sys/kernel/real-root-dev
[ ! -d /sys/class ] && mount -n -tsysfs sysfs /sys

# start device auto discovery (just the first case is tested yet)
if [ -x /bin/udev -a -x /bin/udevstart ] ; then
  echo "Starting udev"
  echo "/bin/udev" > /proc/sys/kernel/hotplug
  /bin/udevstart &
elif [ -x /bin/hotplug ] ; then
  echo "Enabling hotplug"
  echo "/bin/hotplug" > /proc/sys/kernel/hotplug
elif [ -s /dev.tgz ] ; then
  echo "Using traditional static /dev entries"
  tar -xpzf /dev.tgz -C / &
fi
# read kernel commandline
TMPFSSIZE="50%"
export DEBUGLEVEL=0
echo "noldap" > /tmp/ldap-done
echo "nodhcp" > /tmp/dhcp-done
read KCMDLINE < /proc/cmdline
export KCMDLINE
for opts in ${KCMDLINE} ; do
  case ${opts} in
    # localization
    country=*)
      COUNTRY=${opts#country=}
      echo -e "\n# localization information gotten via kernel command line \
in $0\ncountry=\"${COUNTRY}\"" >> /etc/machine-setup
    ;;
    # single token for debugging
    debug)
      DEBUGLEVEL=1;;
    # debug level
    debug=*)
      DEBUGLEVEL=${opts#debug=};;
    # if configuration should be gathered by dhcp client
    dhcp)
      DHCP="yes"
      rm /tmp/dhcp-done;;
    # if ldap configuration should be triggered
    ldap)
      LDAP="yes"
      rm /tmp/ldap-done;;
    # if ld.so.cache should not be generated
    noldsc)
      NOLDSC=yes;;
    # if unionfs should be used
    unionfs*)
      UNIONFS=1;;
    # dnbd server:port 
    dnbdroot=*)
      DNBDOPT=${opts#dnbdroot=};;
    # nbd server:port,filesystem (filesystem is optional)
    nbdroot=*)
      NBDOPT=${opts#nbdroot=};;
    # ip configuration client-ip:server-ip:gateway:netmask
    ip=*)
      IPINFO=${opts#ip=};;
    # nfs server and path
    nfsroot=*)
      NFSROOT=${opts#nfsroot=}
      echo -e "\n# nfs root information gotten via kernel command line \ in $0\nnfsroot=\"${NFSROOT}\"" >> /etc/machine-setup
    ;;
    # size of tempfs if not max. 50% of RAM should be used
    tmpfssize=*)
      TMPFSSIZE=${opts#tmpfssize=};;
    # vendor code identifier for dhcp requests
    vci=*|VCI=*)
      VCI=${opts#VCI=};;
  esac
done
# check if at least one type of IP configuration is availabe
if [ -z "$DHCP" -a -z "$LDAP" -a -z "$IPINFO" ] ; then
  if strinfile "clientip" /etc/machine-setup ; then
    # IP configuration seems to be present in machine-setup file
    . /etc/machine-setup
    IPINFO="ip=$clientip:$serverip:$gateway:$subnet_mask"
  else
    error "  Unable to setup at \
least basic functionality, because no IP configuration\n  available. You \
might pass that information via kernel command line\n  through setting of \
'ipappend 1' in pxelinux.cfg/* or just enable dhcp\n  or ldap. They are \
enabled via tokens ('ldap' or 'dhcp') in kernel\n  command line."
  fi
fi
#[ -z "$DHCP" -a -n "$LDAP" -a -z "$IPINFO" ] && error "  Unable to setup at \
#might pass that information via kernel command line\n  through setting of \
#'ipappend 1' in pxelinux.cfg/* or just enable dhcp\n  or ldap. They are \
#enabled via tokens ('ldap' or 'dhcp') in kernel\n  command line."
#  fi
#fi
[ -z "$DHCP" -a -n "$LDAP" -a -z "$IPINFO" ] && error "  Unable to setup at \
least basic functionality, because no IP configuration\n  available. Please \
beware - ldap works only in combination of either\n  ipappend or similar or \
with dhcp!"
# set debug level and logfile
echo "Setting debuglevel to ${DEBUGLEVEL}"
export MODPRV=" "
export LOGFILE
if [ "${DEBUGLEVEL}" -gt 0 ] ; then
  # if LOGFILE should be used within initial ramdisk add '/mnt' in fron
  # of the variable
  LOGFILE="/var/log/dxs-boot.log"
  [ "${DEBUGLEVEL}" -gt 2 ] && { 
    set -x
    # modprobe should be verbose
    MODPRV="-v"; }
else
  # switch off most of kernel debug output
  echo "0 0 0 0" >/proc/sys/kernel/printk
  # modprobe should stay quiet
  MODPRV="-q"
  LOGFILE="/dev/null"
fi
# load network adaptor modules
modprobe ${MODPRV} -a ${NWMODULES} || error "  Failed to load the network \
adaptor modules defined via mkdxsinitrd\n  run. Please rerun and list the \
appropriate modules (without .ko)."
# set up loopback networking (ipsetup - function defined in /etc/functions)
ipsetup 127.0.0.1 255.0.0.0 0.0.0.0 127.255.255.255 lo
# analyze ip information from the kernel command line and put parts
# of it into several variables
if [ -n "$IPINFO" ] ; then
  IP=`echo $IPINFO|sed -e "s,:.*,,"`
  SERVER=`echo $IPINFO|sed -e "s;[0-9\.]\{3,\}:;;" -e "s,:.*,,"`
  GW=`echo $IPINFO|sed -e "s;[0-9\.]\{3,\}:[0-9\.]\{3,\}:;;" -e "s,:.*,,"`
  # remove last colon after netmask if it was left there ...
  IPINFO=`echo $IPINFO|sed -e "s,:$,,"`
  NM=`echo $IPINFO|sed -e "s,.*:,,"`
  echo -e "# ip configuration written by $0 script\nclientip=$IP\n\
sub_netmask=$NM\ngateway=$GW\nserverip=$SERVER" \
    >>/etc/machine-setup
  # set static ip address via function ipsetup
  ipsetup $IP $NM $GW 255.255.255.255 eth0
else
  noipyet="yes"
fi
# get configuration data via dhcp or ldap if available (in background)
[ -n "$DHCP" ] && rundhcp ${VCI} &
if [ -n "$noipyet" ] ; then
  waitfor /tmp/dhcp-done 20000
  . /etc/machine-setup
  ipsetup $clientip $subnet_mask $gateway $broadcast_address eth0
fi
[ -n "$LDAP" ] && ldapconf &

# if root filesystem should be imported via traditional network block device 
if [ -n "${NBDOPT}" ] ; then
  modprobe ${MODPRV} nbd || error "  Failed to load module nbd.ko. It is \
needed if you intend to use\n  network block device (NBD) for the client \
as root filesystem."
  nbdhost=${NBDOPT%:*}
  nbdopt=${NBDOPT#*:}
  nbdport=${NBDOPT%,*}
  nbdfs=${NBDOPT#*,}
  echo "Diskless client using nbd server $nbdhost:$nbdport,$nbdfs"
  nbd-client $nbdhost $nbdport /dev/nbd0
  if [ -z "$nbdfs" ]; then 
    RFST=ext2; 
  else 
    RFST=$nbdfs;
    modprobe ${MODPRV} ${RFST}
  fi
fi

# if root filesystem should be imported via udp based distributed network
# block device
if [ -n "${DNBDOPT}" ] ; then
  modprobe ${MODPRV} dnbd || echo "failed to load dnbd!"

fi

# if no type of root filesystem is passed via kernel command line try
# information gathered from dhcp process
if [ -z "${DNBDOPT}" -a -z "${NBDOPT}" -a -z "${NFSROOT}" ] ; then
  # information has to be read from dhcp configuration
  if [ -z "$noipyet" ] ; then
    waitfor /tmp/dhcp-done 20000
  fi
  waitfor /tmp/ldap-done 20000
  . /etc/machine-setup
  NFSROOT=${serverip}:${root_path}
fi

# call function for nfs mounts
if [ -z "${DNBDOPT}" -a -z "${NBDOPT}" ] ; then
  nfsmnt ${NFSROOT} ${MODPRV}
fi
# Bruchstücke?? Was hat das hier verloren?
#  You might want to check the list of mounted filesystems and if /mnt is\n\
#  not empty run 'ls /mnt/lib/modules' to check."
# start hardware configuration as background process
hwautocfg &

# try to use unionfs for rw access if available
RWDIR=/dev/shm
if [ -n "${UNIONFS}" ] ; then
  modprobe ${MODPRV} unionfs || { 
    error "  Loading of UnionFS failed - Either module is not present or \
module\n  does not match the running kernel. If you do not want to see this \
\n  message remove the token 'unionfs' from kernel command line." nonfatal 
    UNIONFS=""; }
fi

if [ -n "${UNIONFS}" ] ; then
  echo -n "Using UnionFS for rw access"
  mkdir -p ${RWDIR}/union ${RWDIR}/uniontmp
  mount -n -t tmpfs none ${RWDIR}/uniontmp
  mount -n --move /mnt /root
  mount -n -t unionfs -o dirs=${RWDIR}/uniontmp=rw:/root=ro none /mnt
  mkdir -p /mnt/uniontmp
  mount -n --move ${RWDIR}/uniontmp /mnt/uniontmp
  [ -z "${NOLDSC}" ] && ldconfig /etc/ld.so.cache &
else
  echo -n "Using bind mounts to ramdisk for rw access"
  mount -n -t tmpfs -o size=${TMPFSSIZE} ramfs ${RWDIR}
  for path in ${BINDMPTS} ; do
    mkdir -p ${RWDIR}/${path} >/dev/null 2>&1
    mount -n --bind ${RWDIR}/${path} /mnt/${path}
  done
  [ -z "${NOLDSC}" ] && ldconfig /tmp/ld.so.cache &
  for path in ${RODIRSINRW}; do
    if [ -d /mnt/${path} ] ; then
      LIST=${path}" "$LIST
      # exclude them from etc copy process too
      echo ${path}|sed -e "s,/root/,," >>/tmp/etc.exclude
      mkdir -p /root/${path} >/dev/null 2>&1
      #[ ${DEBUGLEVEL} -gt 0 ] && |      #echo " ${path} (without /root path component)" >>$LOGFILE
      mount -n --bind /mnt/${path} /root/${path} >/dev/null 2>&1
    fi
  done
  for path in /etc/${SYSCONFDIR} ${DIRINBINDMNT} ${LIST}; do
    mkdir -p ${RWDIR}/${path}
  done
  testmkd ${RWDIR}/var/tmp
  chmod a+rwxt ${RWDIR}/var/tmp >/dev/null 2>&1

  echo -e "${DISETCEXCL} @@@COMETCEXCL@@@" >>/tmp/etc.exclude
  # if ld.so.cache is to be generated then do not copy the file
  [ -z "${NOLDSC}" ] && echo -e "ld.so.cache*" >>/tmp/etc.exclude
  # for tar exclude lists might be used, more difficult for cp
  cd /mnt
  tar -X /tmp/etc.exclude -cp etc/* | \
    tar -xp -C ${RWDIR}>/dev/null ;
  cd /
  mount -n --bind ${RWDIR}/etc /mnt/etc
  mount -n --bind ${RWDIR}/var /mnt/var
  # get the "covered" mounts back into filesystem structure
  for i in ${LIST}; do
    #rm -rf /* >/dev/null 2>&1
    mount -n --move /root/$i /mnt/$i #>>$LOGFILE 2>&1
  done
  rm -rf /root/* >/dev/null 2>&1
  # run some specific stuff !?
fi
echo "fs complete" >/tmp/fscmpl

# write debug file information after filesystem setup completed
echo -e "# /etc${SYSCONFDIR}/logfile - file created by $0\n#\n# logfile for linux diskless client specific debugging output\nLOGFILE=\"$LOGFILE\"\n#\n# debug level\nDEBUGLEVEL=\"$DEBUGLEVEL\"" > /mnt/etc/${SYSCONFDIR}/logfile || \
  error "Unable to create the logfile configuration in /etc/${SYSCONFDIR}. \
That\n  might indicate some severe error."

# run distribution independent and dependent configuration of files and 
# services
servconfig &

for path in @@@COMDIRINDXS@@@ ${DISDIRINDXS} ${DIRINBINDMNT} ; do
  testmkd /mnt/${path}
done
for i in /var/run/utmp /var/log/wtmp /var/log/lastlog /etc/mtab ; do
  echo -n > /mnt$i
done
chmod a+rwxt /mnt/tmp /mnt/tmp/scratch 2>/dev/null &
chown 65534:0 /mnt/var/lib/nobody &
echo -e "# /etc/fstab - file generated by\n#\t$0:\n#\tDirk von \
Suchodoletz, dirk@goe.net\n\nrootfs\t\t/\t\trootfs\t\tro\t\t 0 0\n\
proc\t\t/proc\t\tproc\t\tdefaults\t 0 0\ninitramdevs\t/dev\t\ttmpfs\
\t\trw\t\t 0 0\ndevpts\t\t/dev/pts\tdevpts\t\tmode=0620,gid=5\t 0 0\n\
usbfs\t\t/proc/bus/usb\tusbfs\t\tnoauto\t\t 0 0">/mnt/etc/fstab || \
  error "Failed to create /etc/fstab in the clients root filesystem. The\n\
  noexistence of the file might produce some unexpected behaviour of\n\
  mount commands."
date
# copy library cache if generated
if [ -z "${NOLDSC}" ] ; then
  if waitfor /tmp/ldcfg 50000 ; then
    test -s /mnt/tmp/ld.so.cache && {
      cp /mnt/tmp/ld.so.cache /mnt/etc/ld.so.cache
      rm /mnt/tmp/ld.so.cache; }
  else 
    error "  For some reason the generation of \
ld.so.cache did not finish in time."
  fi
else
  [ "${DEBUGLEVEL}" -gt 0 ] && echo -e "You decided not to recreate \
/etc/ld.so.cache file. That might cause errors\nif libraries are installed \
after this file was created on server." >> /mnt/${LOGFILE}
fi
# save machine configuration
cp /etc/machine-setup /mnt/etc
waitfor /tmp/hwcfg 20000 || error "  For some reason the hardware autoconfig \
of this client did not finish in\n  time. You might check the process list \
and list the modules loaded until\n  now."

date
#ash
# IP configuration is made and should not be updated automatically
killall -9 dhcpcd dhclient pump 2>/dev/null
# unmount the bind mounted modules directory
umount -n /lib/modules/${KERNEL} || error "Unmount of the kernel \
modules directory failed for some reason."
# reset hotplug
echo "/sbin/hotplug" > /proc/sys/kernel/hotplug
echo ""
test -f /mnt/etc/inittab || error "  The file /etc/inittab does not exist or \
is no regular one. It is needed\n  for the bootup procedure to follow."
umount -n /sys || error "  Unmount of the kernel sys directory \
failed for some\nreason.  You will get some error messages that some files \
could not be\n  removed." nonfatal
mount -n --move /dev /mnt/dev
cd /mnt
umount -n /proc
[ -n "${UNIONFS}" ] && mount -n --move /root /mnt/mnt 
pivot_root . mnt || error "  Could not execute pivot_root due to missing \
command or wrong\n  parameters given."
exec `which chroot` . sh -c 'rm -rf mnt/*; exec /sbin/init' \
  <dev/console >dev/console 2>&1