path: root/initrd/initrd-stuff/init

#!/bin/sh
# main script for new type of initial ramdisk for OpenSLX linux diskless
# clients version 4
#
# Dirk von Suchodoletz <dirk@goe.net>, 07-09-2006
#
# (c) 2006 - RZ Universitaet Freiburg
# (c) 2006 - OpenSLX.ORG project

# functions common for all distros, messages contains all error and info
# output
. /etc/messages
. /etc/functions || ( echo -e $init_mff && exit 1 )
. /etc/distro-functions || ( echo -e $init_dff && exit 1 )
# configuration settings (several file and directory variables)
. /etc/sysconfig/config || ( echo -e $init_dscf && exit 1 )

export PATH=/bin:/sbin:/usr/bin/:/usr/sbin
export date="@@@DATE@@@"

export DEBUGLEVEL=0
export KERNEL="@@@KERNVER@@@"
export NWMODULES="@@@NWMODULES@@@"
export DISTRO="@@@DISTRO@@@"

# do not use dnbd cache file
nodnbdcache="yes"

# device files get their own filesystem (to be move mounted later)
DEVDIR="/dev"
mount -n -t tmpfs -o 'size=25%,mode=0755' initramfsdevs ${DEVDIR}

# copy basic device files into dev (later udev will handle that)
cp -a /tmp/null /tmp/console /dev
mkdir -p ${DEVDIR}/pts
mkdir -p ${DEVDIR}/shm
mkdir -p ${DEVDIR}/.udevdb

# mount the important standard directories
[ ! -f /proc/cpuinfo ] && mount -n -t proc proc /proc
echo 256 > /proc/sys/kernel/real-root-dev
[ ! -d /sys/class ] && mount -n -t sysfs sysfs /sys

# redirect console (after /dev/console is available, and /dev mounted)
exec < /dev/console > /dev/console 2>&1

# set defaults for some important variables, might be overwritten via
# kernel commandline
TMPFSSIZE="50%"
COWSIZE="50%"
RWDIR=/dev/shm
NFSRO="nfs"

# run pre init script and user defined preinit.local, copied by mkdxsinitrd
# from /var/lib/openslx/config/... in stage2
preinit
[ -x /bin/preinit.local ] && /bin/preinit.local

# start device auto discovery service - distro specific function
udev_hotplug

# switch off the several configuration methods, will be switched on
# according to kernel commandline settings
echo "noldap" > /tmp/ldap-done
echo "nodhcp" > /tmp/dhcp-done
echo "nofile" > /tmp/file-done
# read kernel commandline
read KCMDLINE < /proc/cmdline
export KCMDLINE
for opts in ${KCMDLINE} ; do
  case ${opts} in
    # localization
    country=*)
      COUNTRY=${opts#country=}
      echo -e "\n# localization information gotten via kernel command line \
in $0\ncountry=\"${COUNTRY}\"" >> /etc/machine-setup
    ;;
    # single token for debugging ...
    debug)
      DEBUGLEVEL=1;;
    # ... or a specified debug level
    debug=*)
      DEBUGLEVEL=${opts#debug=}
      # Handle empty, extremly large or non-numeric input
      [ -z "$DEBUGLEVEL" ] && DEBUGLEVEL=0
      [ $DEBUGLEVEL -eq 8 ] && echo "** SLX init started near $(sysup)"
    ;;
    # if configuration should be gathered by dhcp client
    dhcp)
      DHCP="yes"
      rm /tmp/dhcp-done
    ;;
    # if ldap configuration should be triggered
    ldap)
      LDAP="yes"
      rm /tmp/ldap-done
    ;;
    # ldap configuration with host and port to contact (base)
    ldap=*)
      LDAP="yes"
      rm /tmp/ldap-done
    ;;
    # if (external, via tftp) configuration file retrieval should be
    # triggered, if no source is given try dhcp server and predefined
    # standard path (~/tftpboot/client-conf/ ...)
    file)
      FILE="yes"
      rm /tmp/file-done
    ;;
    # file source with tftp server and file location on the server
    file=*)
      FILE="yes"
      FILESRC=${opts#file=}
      rm /tmp/file-done
    ;;
    # if ld.so.cache should not be generated
    noldsc)
      NOLDSC=yes;;
    # additional source to unify root filesystem with
    union=*)
      UNIONFS=1
      UNIONDIRS=${opts#union=}
    ;;
    # if unionfs should be used over the complete root filesystem
    unionfs)
      UNIONFS=1;;
    # if cowloop should be used, only ontop of network block device and in
    # combination with classical fs, like ext2 useful
    cowloop=*)
      COWLOOP=1
      #COWSIZE=${opts#cowloop=}
    ;;
    # rootfs will void the variables (d)nbdroot, nfsroot ...
    # fixme: allow multiple rootfs sources to be unioned!?
    # if strinstr " " "$ROOTFS" ...
    rootfs=*)
      ROOTFS=${opts#rootfs=}
      srvproto=$(uri_token $ROOTFS prot)
      case $srvproto in
        nfs)
          NFSROOT=$(uri_token $ROOTFS server)":/"$(uri_token $ROOTFS path)
          echo -e "\n# nfs root information gotten via kernel command \
line in $0\nnfsroot=\"${NFSROOT}\"\n" >> /etc/machine-setup
        ;;
        *nbd)
          nbdmod=$srvproto
          # get settings for nbd-client, filesystem equals to path in URI
          # notation
          nbdhost=$(uri_token $ROOTFS server)
          nbdport=$(uri_token $ROOTFS port)
          nbdrfst=$(uri_token $ROOTFS path)
        ;;
        aoe)
          echo "Not implemented yet"
        ;;
        iscsi)
          echo "Not implemented yet"
        ;;
      esac
    ;;
    # size of cache dnbd should use within ram
    dcsize=*)
      DNBDCACHESIZE=${opts#dcsize=};;
    # ip configuration client-ip:server-ip:gateway:netmask
    ip=*)
      IPINFO=${opts#ip=};;
    # deprecated: nfs server and path (will be removed soon)
    nfsroot=*)
      NFSROOT=${opts#nfsroot=}
      echo -e "\n# nfs root information gotten via kernel command line in $0\n\
nfsroot=\"${NFSROOT}\"\n" >> /etc/machine-setup
    ;;
    # size of tempfs if not max. 50% of RAM should be used
    tmpfssize=*)
      TMPFSSIZE=${opts#tmpfssize=};;
    # vendor code identifier for dhcp requests, that way odlx clients could
	# be distinguished from other (dhcp) clients
    vci=*)
      VCI=${opts#vci=};;
  esac
done
# check if at least one type of IP configuration is availabe
if [ -z "$DHCP" -a -z "$LDAP" -a -z "$IPINFO" ] ; then
  echo -e "# You did not specify any advanced configuration mode for your \
clients. You\n# might want to add the token 'dhcp' for DHCP configuration, \
'file(=source)'\n# for config file get via TFTP or 'ldap(=source)' for LDAP \
configuration to\n# your kernel command line." >> /etc/machine-setup
  if strinfile "clientip" /etc/machine-setup ; then
    # IP configuration seems to be present in machine-setup file
    . /etc/machine-setup
    IPINFO="ip=$clientip:$serverip:$gateway:$subnet_mask"
  else
    error "$init_errip"
  fi
fi
# for ldap configuration at least basic IP setup is needed to contact the
# server
[ -z "$DHCP" -a -n "$LDAP" -a -z "$IPINFO" ] && error "$init_errldap"
# set debug level and logfile
echo "Setting debuglevel to ${DEBUGLEVEL}"
export MODPRV=" "
export LOGFILE
if [ "${DEBUGLEVEL}" -gt 0 -a "${DEBUGLEVEL}" != 8 ] ; then
  # if LOGFILE should be used within initial ramdisk add '/mnt' in front
  # of the variable
  LOGFILE="/var/log/dxs-boot.log"
  echo "1 4 1 7" >/proc/sys/kernel/printk
  [ "${DEBUGLEVEL}" -ge 2 ] && MODPRV="-v"
  [ "${DEBUGLEVEL}" -gt 3 ] && {
    set -x
    # and the kernel too
    echo "7 7 7 7" >/proc/sys/kernel/printk; }
  [ "${DEBUGLEVEL}" -gt 10 ] && set +x
else
  # switch off most of kernel debug output
  echo "0 0 0 0" >/proc/sys/kernel/printk
  # modprobe should stay quiet
  MODPRV="-q"
  LOGFILE="/dev/null"
fi
# load network adaptor modules
for mod in ${NWMODULES}; do
  modprobe ${MODPRV} $mod || error "$init_errnwad"
done
# set up loopback networking (ipsetup - function defined in /etc/functions)
ipsetup 127.0.0.1 255.0.0.0 0.0.0.0 127.255.255.255 lo
# analyze ip information from the kernel command line and put parts
# of it into several variables
if [ -n "$IPINFO" ] ; then
  getip () {
    val=$IPINFO; i=$(expr $1 - 1);
    while [ $i -gt 0 ] ; do
      val=${val#*:} ; i=$(expr $i - 1);
    done;
  echo $val|sed "s/:.*//"; }
  clientip=$(getip 1)
  serverip=$(getip 2)
  gateway=$(getip 3)
  subnet_mask=$(getip 4)
  echo -e "# ip configuration written by $0 script\nclientip=$clientip\n\
subnet_mask=$sub_netmask\ngateway=$gateway\nserverip=$serverip" \
    >>/etc/machine-setup
  # set static ip address via function ipsetup
  ipsetup $clientip $subnet_mask $gateway 255.255.255.255 eth0
else
  noipyet="yes"
fi
# get configuration data via dhcp (with vendor code identifier if present
# in ${VCI} (from kernel command line) ...
[ -n "$DHCP" ] && rundhcp ${VCI} &
if [ -n "$noipyet" ] ; then
  waitfor /tmp/dhcp-done 20000
  . /etc/machine-setup
  [ -f /tmp/confviadhcp ] && . /tmp/confviadhcp
  [ -z "$clientip" -o -z "$subnet_mask" -o -z "$gateway" \
    -o -z "$broadcast_address" ] && error "$init_errdhcp"
  ipsetup $clientip $subnet_mask $gateway $broadcast_address eth0
fi
# ... or ldap if available (in background)
[ -n "$LDAP" ] && ldapconf &
# ... or via tftp file get (in background)
[ -n "$FILE" ] && fileget &

# if root filesystem should be imported via (d) network block device
if [ -n "${nbdmod}" ] ; then
  # load block device driver if needed
  modprobe ${MODPRV} ${nbdmod} || error "$init_errnbd"
  [ -z "$nbdrfst" ] && nbdrfst=ext2
  echo "Diskless client using ${nbdmod} on $nbdhost:$nbdport with $nbdrfst"
  # fixme: check for fs in /proc/filesystems before trying to load the module
  modprobe ${MODPRV} ${nbdrfst} || error "$init_errnbd" nonfatal

  case "${nbdmod}" in
    # network block device present in standard kernel
    nbd)
      RDEV=/dev/nbd0
      waitfor "${RDEV}" 30000 || error "$init_nbddev"
      echo "0" > /sys/block/nbd0/queue/read_ahead_kb
      nbd-client $nbdhost $nbdport ${RDEV} || error "$init_nbdcl"
      usleep 10
      # switch off unneeded block read ahead
      echo "0" > /sys/block/nbd0/queue/read_ahead_kb
      ;;
    # dnbd by Thorsten Zitterell
    dnbd)
      if [ -z $nodnbdcache ] ; then  # variable not really used yet
        mkdir /dnbd
        mount -n -o 'size=10%' -t tmpfs tmpfs /dnbd
        ( cat /dev/zero > /dnbd/cache 2>/dev/null || echo "ok" >/tmp/cache ) &
        clientopt="-c /dnbd/cache"
        waitfor /tmp/cache 10000
      fi
      waitfor /dev/dnbd0 10000 || error "$init_nbddev"
      while ! dnbd-client -b $nbdhost -d /dev/dnbd0 $clientopt ; do
        usleep 20
      done
      echo "0" > /sys/block/dnbd0/queue/read_ahead_kb
      RDEV=/dev/dnbd0
      ;;
  esac
  RWRO="ro"
  if [ -n "${COWLOOP}" -a -x /bin/cowdev ] ; then
    modprobe ${MODPRV} cowloop || {
      error "$init_loadcow" nonfatal
      COWLOOP=""; }
  fi
  if [ -n "${COWLOOP}" ] ; then
    if [ -n "${UNIONFS}" ] ; then
      error "$init_cownonbd"
      UNIONFS="";
    fi
    echo "Using Copy-on-Write block device for rw access"
    mount -n -t tmpfs -o size=${COWSIZE} ramfs ${RWDIR}
    mkdir /dev/cow && cp -a /tmp/ctl /dev/cow
    usleep 10
    ln -s /dev/cowloop0 /dev/cow/0
    cowdev -a /dev/nbd0 ${RWDIR}/nbd.cow
    usleep 10
    RWRO="rw"
    RDEV=/dev/cow/0
    # run ldconfig if not switched off via kernel command line
    ldcfg
  else
    # use normal UnionFS behaviour because rootfs is not NFS
    NFSRO=""
  fi
  # finally mount the block device
  for i in 5 40 60 ; do
    usleep $i
    mount -n -t $nbdrfst -o $RWRO $RDEV /mnt 2>/dev/null && break
  done
fi

# if no type of root filesystem is passed via kernel command line try
# information gathered from dhcp process
if [ -z "${nbdmod}" -a -z "${nbdhost}" -a -z "${NFSROOT}" ] ; then
  # information has to be read from dhcp configuration
  if [ -z "$noipyet" ] ; then
    waitfor /tmp/dhcp-done 20000
  fi
  waitfor /tmp/ldap-done 20000
  . /etc/machine-setup
  NFSROOT=${serverip}:${root_path}
fi
# call function for nfs mounts
if [ -z "${nbdmod}" -a -z "${nbdserver}" ] ; then
  nfsmnt ${NFSROOT} || error "$init_nfs"
fi

# get the complete collection of kernel modules available
mount -n --bind /mnt/lib/modules/${KERNEL} /lib/modules/${KERNEL} || \
  error "$init_moddir"
# start hardware configuration as background process
hwautocfg &

# try to use unionfs for rw access if available
if [ -n "${UNIONFS}" -o -n "${UNION}" ] ; then
  modprobe ${MODPRV} unionfs || {
    error "$init_loadufs" nonfatal
    UNIONFS=""; }
fi


# setup of client root filesystem dependent on the availability of UnionFS
if [ -n "${UNIONFS}" ] ; then
  echo "Using UnionFS for rw access"
  mkdir -p ${RWDIR}/union ${RWDIR}/uniontmp /rorootfs
  mount -n -t tmpfs none ${RWDIR}/uniontmp
  # hack for handling unionfs with patched run-init
  mount -n --move /mnt /rorootfs
  mount -n -t unionfs -o dirs=${RWDIR}/uniontmp:/rorootfs=${NFSRO}ro \
    none /mnt
  mkdir -p /mnt/uniontmp
  mount -n --move ${RWDIR}/uniontmp /mnt/uniontmp
  # if additional sources should be used for a combined root filesystem
  # probably more sources should be merged into union (${UNION} is defined)
  # allow more than one union??
  if [ -n "${UNION}" ] ; then
    # for dir in "${UNION}"; do
    # testmkd /unionadd/$dir
    # mount $dir unionadd/$dir
    # unionctl mnt --add --after /mnt --mode ro /unionadd/$dir
    # most probably it is a good idea to run ldconfig, so enable it
    unset NOLDSC
  fi
  # run ldconfig if not switched off via kernel command line
  ldcfg
elif [ -z "$COWLOOP" ] ; then
  echo "Using bind mounts to ramdisk for rw access"
  mount -n -t tmpfs -o size=${TMPFSSIZE} ramfs ${RWDIR}
  for path in ${D_BINDMPTS} ; do
    mkdir -p ${RWDIR}/${path} >/dev/null 2>&1
    mount -n --bind ${RWDIR}/${path} /mnt/${path}
    [ ${DEBUGLEVEL} -gt 1 -a ${DEBUGLEVEL} != 8 ] && \
      echo "Created ${RWDIR}/${path} and mounted it to /mnt/$path"
  done
  # see above ...
  ldcfg
  # Save the RO Directories mentioned in the distro-specific
  # config to a temporary directory. They will lateron be restored 
  for path in ${D_RODIRSINRW}; do
    if [ -d /mnt/${path} ] ; then
      LIST=${path}" "$LIST
      # exclude them from etc copy process too
      echo ${path}|sed -e "s,/root/,," >>/tmp/etc.exclude
      mkdir -p /root/${path} >/dev/null 2>&1
      mount -n --bind /mnt/${path} /root/${path} >/dev/null 2>&1
    fi
  done
  for path in /etc/${D_SYSCONFDIR} ${D_DIRINBINDMNT} ${LIST}; do
    mkdir -p ${RWDIR}/${path}
  done
  testmkd ${RWDIR}/var/tmp
  chmod a+rwxt ${RWDIR}/var/tmp >/dev/null 2>&1
  echo -e "${D_ETCEXCL} @@@COMETCEXCL@@@" >>/tmp/etc.exclude
  # if ld.so.cache is to be generated then do not copy the file
  [ -z "${NOLDSC}" ] && echo -e "ld.so.cache*" >>/tmp/etc.exclude
  # for tar exclude lists might be used, more difficult for cp
  cd /mnt
  tar -X /tmp/etc.exclude -cp etc/* | \
    tar -xp -C ${RWDIR} 2>/dev/null ;
  cd /
  mount -n --bind ${RWDIR}/etc /mnt/etc
  mount -n --bind ${RWDIR}/var /mnt/var
  # get the "covered" mounts back into filesystem structure
  for i in ${LIST}; do
    mount -n --move /root/$i /mnt/$i #>>$LOGFILE 2>&1
  done
  #rm -rf /root/* >/dev/null 2>&1
  # run some specific stuff !?
fi
# script for stuff to execute during early bootup
d_mkrlscript init boot.ld "Running configuration postponed from InitRD"
echo "fs complete" >/tmp/fscmpl

# write debug file information after filesystem setup completed
echo -e "# /etc${D_SYSCONFDIR}/logfile - file created by $0 (initramfs \
from $date)\n#\n# logfile \
for linux diskless client specific debugging output\nLOGFILE=\"$LOGFILE\"\n#\
\n# debug level\nDEBUGLEVEL=\"$DEBUGLEVEL\"" \
  > /mnt/etc/${D_SYSCONFDIR}/logfile || error "$init_errlog"

# run distribution independent and dependent configuration of files and
# services
servconfig &

for path in @@@COMDIRINDXS@@@ ${D_DIRINDXS} ${D_DIRINBINDMNT} ; do
  testmkd /mnt/${path}
done
# Needed writable subdirs nested in readonly subdirs of writable one
for path in ${D_RWDIRSINRO}; do
  mount -n -t tmpfs none /mnt/${path}
done
for i in /var/run/utmp /var/log/wtmp /var/log/lastlog /etc/mtab ; do
  echo -n > /mnt/$i
done
chmod a+rwxt /mnt/tmp /mnt/tmp/scratch 2>/dev/null &
chown 65534:0 /mnt/var/lib/nobody &
echo -e "# /etc/fstab - file generated by $0 (initramfs from $date)\n#\
\tDirk von \
Suchodoletz, dirk@goe.net\n\nrootfs\t\t/\t\trootfs\t\tro\t\t 0 0\n\
proc\t\t/proc\t\tproc\t\tdefaults\t 0 0\ninitramdevs\t/dev\t\ttmpfs\
\t\trw\t\t 0 0\ndevpts\t\t/dev/pts\tdevpts\t\tmode=0620,gid=5\t 0 0\n\
usbfs\t\t/proc/bus/usb\tusbfs\t\tnoauto\t\t 0 0" >/mnt/etc/fstab || \
  error "$init_fstab"
echo -e "rootfs / rootfs rw 0 0\ninitramdevs /dev tmpfs rw\
 0 0" > /mnt/etc/mtab

# copy library cache if generated
if [ -z "${NOLDSC}" ] ; then
  if waitfor /tmp/ldcfg 50000 ; then
    test -s /mnt/tmp/ld.so.cache && {
      cp /mnt/tmp/ld.so.cache /mnt/etc/ld.so.cache
      rm /mnt/tmp/ld.so.cache; }
  else
    error "$init_errldcfg"
  fi
else
  error "$init_infldcfg" nonfatal
fi
# copy machine configuration (from global settings, additions made within
# here and from dhcp/ldap sources) to client /etc for later checks
waitfor /tmp/hwcfg 20000 || error "$init_errhw"
waitfor /tmp/svcfg 20000 || error "$init_errsw"
# IP configuration is made and should not be updated automatically, udevd
# should be killed if started within init
killall -9 dhcpcd dhclient pump 2>/dev/null
cp /etc/machine-setup /mnt/etc

# post init for some distro specific (fixme!! more elegant solution)
postinit
[ -s /initramfs/postinit.local ] && \
  cp /initramfs/postinit.local /bin/postinit.local
[ -x /bin/postinit.local ] && {
  echo "Running postinit.local - if boot stops here, check the script!"
  /bin/postinit.local; }

# start a debug shell in higher debug levels
[ $DEBUGLEVEL -gt 2 -a $DEBUGLEVEL != 8 ] && /bin/sh

# unmount the bind mounted modules directory
for i in 0 40 100 200 300 500 800 1000 1200; do
  usleep $i && umount -n /lib/modules/${KERNEL} 2>/dev/null && break
  error "$init_wait" nonfatal
done

[ $i -gt 1000 ] && error "$init_errumnt"
# check for inittab file
test -f /mnt/etc/inittab || error "$init_erritab"
# close runlevel script for stuff to execute during early bootup
d_mkrlscript close boot.ld ""
# put /tmp into stage4 mtab
sed -n "s,/mnt,,;/\/tmp /p" /proc/mounts >> /mnt/etc/mtab
# preparations to leave initrd - umounting ...
umount -n /sys || error "$init_errsys" nonfatal
umount -n /proc/bus/usb >/dev/null 2>&1
mount -n --move /dev /mnt/dev
killall -9 udevd 2>/dev/null
[ $DEBUGLEVEL -eq 8 ] && echo "** SLX init ended near $(sysup)"
umount -n /proc
# unset old environment variables
unset debug date initrd ip dnbdroot nbdroot nfsroot vci vga
unset BOOT_IMAGE KCMDLINE KERNEL MODPRV NWMODULES OLDPWD UDEVD_EVENT_TIMEOUT \
  UDEVD_EXPECTED_SEQNUM
#strinstr "bash" "$(ls -la /bin/sh)" && EE="-c"
# new style of pivoting (exec -c would set an empty environment in bash)
exec run-init -c dev/console /mnt /sbin/init || error "$init_runinit"